Çalışma platformlu yarı römork

ES-GE 5-Achs-Ballastauflieger

You can find our entire vehicle inventory with immediately and short-term available vehicles on our website.

Excerpt from the equipment. Full equipment details available upon request.

Chassis:
* Welded construction made from high-grade steel profiles with punched-through cross members, designed for high point loads
* Outer frame made of UNP steel

Coupling device:
* 2-inch king pin

Underride protection:
* According to EC standards, bolted version

Side underrun protection:
* According to EC standards

Landing gear:
* Landing legs with single-sided operation, support load approx. 66 t / lifting capacity approx. 24 t

Axles:
* 5 x 10 t air suspension axle units, SAF brand, with drum brakes approx. 400 x 200 mm
* ABS
* Centered 10-hole wheel mounting, offset 0
* Total air suspension travel approx. 200 mm (lift approx. 140 mm, lower approx. 60 mm), controlled via rotary lever valve with detent function

Steering:
* 1st axle steered, 2nd axle fixed, 3rd, 4th, and 5th axles force-steered via tie rod system
* Centralized external grease points

Axle lift:
* First and second axles automatically liftable, with additional cutoff on the chassis

Blodpfjwx Dcaex Abroc
Brake system:
* Two-line compressed air brake system according to EC standards with EBS and RSS, automatic load-dependent adjustment, Wabco brand 4S/3M
* Spring-loaded brake cylinders as parking brake, anti-swapping coupling heads mounted directly on front cross member, no connection line to truck
* Aluminum air reservoir

Tyres:
* 10-fold 445/65 R22.5 164J on 11.75 X 22.5 offset 0 rims – brand of our choice
TPMS:
* Tire pressure monitoring system (TPMS) according to ECE R141, with data transmission to tractor unit

Mudguards:
* According to EC standards, 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axles each with 1/4 PVC mudguard front and rear
* Rear mudguards with spray flaps

Load securing:
* 5 pairs of folding lashing rings, evenly distributed (tensile force approx. 14 t)
* 11 pairs of welded lashing plates in the outer frame (tensile force approx. 3 t)
* 10 pairs of side lashing rings in the outer frame, evenly distributed (tensile force approx. 8 t)

Stake pockets:
* 10 pairs of stake pockets inset in the outer frame
* 6 pairs of stake pockets inset in the floor (on outer longitudinal beam)

Removable stakes:
* 16 galvanized plug-in stakes, approx. 80 x 80 x 8 mm, usable length approx. 850 mm
Stake magazine:
* On each side in front of the front wall, a magazine for 8 plug-in stakes approx. 80/80 mm
Front wall:
* Bolted corner uprights filled with aluminum hollow profiles, inside with full-width and height steel impact plate

Floor:
* Approx. 28 mm Z-hardwood flooring inset into the outer frame, flush

Lighting system:
* According to EC standards, 24 Volt with multi-chamber lamps
* LED side marker lamps
* Front white LED position lamps
* Rear LED outline marker lamps
* License plate lamp, 1x15 and 2x7-pin plug connectors at front cross member

Equipment:
* Two wheel chocks with holders
* Warning panel according to ECE 70
* Work light on lamp carrier (activated by reverse gear)
* Bracket for rotating beacon at rear (including beacon)
* 1 fixed access ladder on each side, including plug-in step assistance
* Smart Board
* Vehicle swing-out warning sticker & load center of gravity label

Paintwork:
* Chassis and front wall sandblasted and finished with high-quality coating
* Chassis: hot-dip galvanized + RAL color of your choice
* Front wall: RAL color of your choice
* Front wall corner posts: ho

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.