Çalışma platformlu yarı römorkFAYMONVILLE
        MAX Trailer MAX200 Telesattel Megatrailer    
 Çalışma platformlu yarı römork
FAYMONVILLE
        MAX Trailer MAX200 Telesattel Megatrailer    
                                                     sabit fiyat KDV hariç                                            
                                            €49.750                                    
            Durumu        
            Kullanılmış                    
            Konum        
                                                Essen                                            

 Resimleri göster            
 Haritayı göster            
Makineye ait bilgiler
Fiyat ve Konum
                             sabit fiyat KDV hariç                    
                            €49.750                    
- Satıcının konumu:
-     Heegstraße 6-8, 45356 Essen, Almanya             
 Ara            
Teknik detaylar
- Azami yük ağırlığı:
- 38.390 kg
- Toplam ağırlık:
- 48.000 kg
- Dingil konfigürasyonu:
- 3 dingil
- Ilk tescil:
- 03/2024
- Bir sonraki muayene (TÜV):
- 03/2026
- Toplam genişlik:
- 2.540 mm
- Donanım:
- ABS
Teklif detayları
- Listeleme kimliği:
- A20421315
- Referans no.:
- 33271
- Son güncelleme tarihi:
- 31.10.2025
Açıklama
        You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Below is an excerpt of the specifications. The full equipment list is available upon request.
- Load bed in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
Rcsdsxth Adjpfx Afpjh
- 6 pairs of externally folding lashing rings (LC 5,000 daN)
- 2 pairs of externally folding lashing rings (LC 10,000 daN)
- JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 fixed axles, 1 trailing steering axle
- Air suspension with lift and lower valve
- Brake system compliant with EU regulations with EBS-E (2S2M)
- Load gauge for determining axle loads, including load chart
- 2" kingpin
- Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanised extensions, extendable by approx. 230 mm per side
- 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2x20' containers or 1x40' container flush at the rear
- 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the load bed
- 3 pairs of crosswise stake pocket rails mounted in the load bed, for plug-in stakes approx. 100 x 50 mm
- One crosswise INOX toolbox under the loading area, approx. 565 x 290 x 810 mm
- Holder for aluminium access ramps, crosswise under the load bed behind the axles
- Sliding mounting rails for aluminium access ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallisation (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
- Load bed in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
Rcsdsxth Adjpfx Afpjh
- 6 pairs of externally folding lashing rings (LC 5,000 daN)
- 2 pairs of externally folding lashing rings (LC 10,000 daN)
- JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 fixed axles, 1 trailing steering axle
- Air suspension with lift and lower valve
- Brake system compliant with EU regulations with EBS-E (2S2M)
- Load gauge for determining axle loads, including load chart
- 2" kingpin
- Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanised extensions, extendable by approx. 230 mm per side
- 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2x20' containers or 1x40' container flush at the rear
- 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the load bed
- 3 pairs of crosswise stake pocket rails mounted in the load bed, for plug-in stakes approx. 100 x 50 mm
- One crosswise INOX toolbox under the loading area, approx. 565 x 290 x 810 mm
- Holder for aluminium access ramps, crosswise under the load bed behind the axles
- Sliding mounting rails for aluminium access ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallisation (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
            Not:        Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.    
İlk kayıt tarihi: 2003
İstek gönder
Telefon & Faks
                            +49 201 8... ilanlar                
            İlanınız başarıyla silindi            
            Bir hata oluştu            
















