Alçak şasi dorse

FAYMONVILLE MAX110 Semi-Tieflader

Durumu: yeni, azami yük ağırlığı: 45.820 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full specifications available upon request. Gooseneck: * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading platform, extendable design: * Loading platform with extendable section and rear chamfer approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame for attaching tension belts (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate over axles Axles: * BPW axles and suspension * 1st axle rigid, all other axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with raise/lower valve * Axle tools included Tyres: * Tyres 245/70 R 17.5 3PMSF, load index (146/146 F) * Manufacturer at our discretion * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to tractor unit via standardised EBS interface per ISO 11992 * For correct display, the tractor unit must support transmitting and displaying these data Landing legs: * JOST landing legs (mechanical), 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco brake system according to EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Paintwork: * Complete steel structure shot-blasted automatically after welding * Second blasting using corundum for optimum coating adhesion * Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver-grey * Rear section metalized and painted in RAL 9010 (pure white) * Metallic paint not available * Coating tested in salt spray test according to ISO 9227-NSS Iijdoxbmpfjpfx Alfea * Cavities sealed with special wax Steel structure: * Steel construction made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicators * ASPÖCK-UNIBOX located on the front connection strip, with 24N, 24S & 15-pin sockets according to ISO * 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on front galvanized connection strip * Electro-hydraulic unit * Forced steering front/rear via cable remote control (push buttons), with single-track control of the axles (no installation in the tractor unit) * Galvanized folding supports under the rear chamfer of the platform * 1 pair of recessed lashing rings along the rear central member in the chamfer (LC 10,000 daN) * Plug-in aluminium side and rear walls on the gooseneck, approx. 2,440 x 400 mm (L x H) * Rear galvanized plug-in stanchions removable (superstructure length approx. 2,560 mm) * Galvanised toolbox integrated into the chamfered gooseneck * 3 pairs of WADER container pockets in the platform for one 20' (30?) or

Durumu: yeni, azami yük ağırlığı: 37.680 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment features. Full equipment list available on request. Gooseneck * With approx. 30 mm hardwood flooring. Straight design at the rear of the gooseneck * 3 pairs of lashing rings (LC 5,000 daN) Load Platform * Extendable version * 5 pairs of outwards-folding lashing rings (LC 5,000 daN) * 3 pairs of outwards-folding lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the load platform (LC 10,000 daN) * Cut-outs in the outer frame of the load platform for attaching tie-down straps (LC 2,000 daN) * Approx. 48 mm hardwood flooring, over the axles with checker plate covering Landing Gear * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift/lower valve Braking System * In accordance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel Construction * Manufactured from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection on the standard shot-blasted welded chassis via a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-colour topcoat in RAL 3002 carmine red * Rims in silver Included Accessories * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * At the galvanized front connection rail: yellow-red air couplings * 4 chocks with holders at the front wall * Spare wheel carrier in front of the front wall * Electro-hydraulic power pack * Remote steerable axles from front and rear via cable remote control with push buttons, with single-track monitoring (installation in tractor unit not included) * European reflective plates (red/yellow) at the rear of the trailer * Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer * Mounts for warning signs with socket at both the gooseneck and rear panel, both left and right * Mount for a beacon at the rear of the trailer * Galvanized folding supports under the inclined portion of the load platform * Load gauge to determine axle loads, including load chart * 7 pairs of WADER container locks for: 1x 20' or 1x 40' container on the load platform, 1x 40' container over the gooseneck or 2x 20' containers * Support block with 1 pair of WADER container locks, load capacity approx.: 20,000 kg * 7 pairs of pocket stakes for 100 x 50 mm plug-in stakes in the outer frame of the load platform * Galvanized, extendable widening brackets by approx. 230 mm per side * Adjustable hook-in rails for aluminium drive-up ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection * 2 LED reversing lights mounted at the rear Iiedov Etx Eepfx Alfoa * Acoustic warning signal when reversing * HRM Metallisation (High Resistance Metallisation)

Durumu: yeni, azami yük ağırlığı: 33.865 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load Platform * Double extendable version with rear chamfer approx. 500 mm x 8° * 6 pairs of outward folding lashing rings (LC 5,000 daN) * 4 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of recess-mounted lashing rings at the front of the loading area (LC 10,000 daN) * 1 cross table approx. 250 mm * Hardwood flooring approx. 48 mm thick, with checker plate coverage over the axles * Cutouts in the outer frame of the loading area for inserting tensioning straps (LC 2,000 daN) Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lift and lower valve * Axle tool kit Tyres: * Tyres 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: High-quality, durable corrosion protection * High-quality 2-component (2K) topcoat painted in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Steel Construction: Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations * Lighting 24 volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front wiring panel * Spare wheel carrier in front of the front wall * Electro-hydraulic power unit * Remote steering from the front and rear via cable remote control with push buttons, with single-track axle alignment (without installation in the tractor unit) * Rear gooseneck mounting point for aluminum loading ramps * Rear hanging rail for aluminum loading ramps * Galvanized folding supports under the rear chamfer of the load platform * On the gooseneck: removable aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * Removable galvanized rear stanchions (body length approx. 2,560 mm) * Tool box, galvanized, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the load area for 1x 20', 2x 20', 40', or 45' containers * 8 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the cargo area * Galvanized wideners, extendable by approx. 230 mm per side * Movable hanging rails for aluminum loading ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear Iiedpfx Asw Tprzslfea * Central lubrication system with 2 BEKAMAX (Pico) pumps using NLGI-2 standard grease and removable protection around the pump * 2 LED reversing lamps mounted on the rear panel * HRM Metallization (High Resistance Metallisation). Complete steel structure sh