Alçak şasi dorse

FAYMONVILLE Multimax Satteltieflader (1+2) - nachlaufgelenkt

You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.

Excerpt from the equipment. Complete equipment list available upon request.

Gooseneck
* Gooseneck in SNT design for optimized load floor length, approx. 3,700 mm length
* Rear bevel approx. 1,000 mm x 10°. For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Removable steel front wall, approx. 400 mm high
* ASPÖCK-UNIBOX on the front connection panel with sockets
* 3 kW electric-hydraulic power unit for controlling hydraulic functions (except for hydraulic winches)
* Outer beams on the gooseneck with mounting holes for bolted lashing rings
* 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 pair of flat-mounted lashing rings in the rear area of the gooseneck (LC 10,000 daN)
* Approx. 40 mm thick hardwood flooring over the gooseneck
* 2-inch king pin
* Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide
* Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917)
* 1 pair of stake pockets recessed into the gooseneck for plug-in stakes approx. 100 x 50 mm (inside on chassis beam)

Dodpfx Afjxc Axrj Dsku
Loading platform
* Extendable loading platform, approx. 8,800 mm in length with rear bevel approx. 500 mm x 10°
* Recess in the platform and extending into the bevel for accommodating the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H)
* Continuous hardwood floor approx. 50 mm thick on the platform, interrupted between the axles
* 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube
* Platform locking with conically welded locking profiles at approx. 250 mm intervals
* 1 pair of lashing rings on the front cross member (LC 10,000 daN)
* 9 pairs of recessed, fold-out lashing rings in the external frame of the platform (LC 10,000 daN)
* 1 pair of fixed wheel recesses in front of the axles, open to the gooseneck cross member, approx. 700 x 410 mm (W x D)
* 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between the 1st and 2nd axles
* Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, also usable as widening boards
* Hardwood covering on the platform's bevel
* Painted sand coating on the platform's outer frame and on the platform's tread plates

Chassis
* BPW axles and suspension
* 1st and 2nd axles rigid
* 3rd axle steered with trailing arm
* 3rd axle with electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lift and lower valve
* 1st axle with starting aid
* 2 axle-load gauges mounted on the left side including axle-load diagram

Tires
* 235/75 R 17.5 3PMSF twin tires
* TPMS tire pressure monitoring system per ECE R 141

Paintwork
* 1 LED work light each on the left and right in front of the axles, wired to the tractor unit

Loading ramps
* Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M: one pair of two-piece steel ramps approx. 4,350 mm long and 900 mm wide
* Hardwood covering
* Hydraulically foldable ramp tips
* Each ramp can be hydraulically moved approx. 235 mm outward and approx. 215 mm inward
* Hardwood covering on the platform's bevel
* Ramp with hardwood covering

Brake system
WABCO EBS-E in accordance with EU regulations

Lighting system
* 24-volt lighting system
* ASPÖCK-NORDIK full LED

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.