Alçak şasi dorseFAYMONVILLE
MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR
Alçak şasi dorse
FAYMONVILLE
MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR
Üretim yılı
2025
Durumu
Yeni
Konum
Landsberg 

Resimleri göster
Haritayı göster
Makineye ait bilgiler
Fiyat ve Konum
- Satıcının konumu:
- Justus-von-Liebig-Straße 37, 86899 Landsberg, Almanya

Ara
Teknik detaylar
- Toplam ağırlık:
- 49.500 kg
- Dingil konfigürasyonu:
- 3 dingil
Teklif detayları
- Listeleme kimliği:
- A8045423
- Son güncelleme tarihi:
- 25.06.2025
Açıklama
3-axle MULTIMAX *PLUS low bed semi-trailer, air-suspended and hydraulically forced-steered axles.
Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR
Speed: 80 km/h legal
Gross vehicle weight: 49,500 kg 31,500 kg
Fifth wheel load: 18,000 kg
Axle load: 31,500 kg 31,500 kg
Gooseneck length approx.: 3,900 mm
Gooseneck width approx.: 2,480 mm
Kingpin turning radius to rear approx.: 2,100 mm
Saddle height loaded approx.: 1,205 mm
Loading platform length approx.: 9,600 mm
Extendable by approx.: *
Loading platform width approx.: 2,540 mm
Load height at max. payload approx.: 890 mm
Suspension stroke approx.: -55/+145 mm
Axle spacing: 1,360 mm
*Gross weight dependent on fifth wheel load: Yes
Special permit required if country-specific regulations are exceeded.
Technical Description
Gooseneck: Gooseneck in SNT design to optimize loading platform length, length approx. 3,900 mm, rear with bevel approx. 1,000 mm x 6°.
Technical fifth wheel load: 18,000 kg.
For tractor units: 4x2 and 6x2.
Loading platform: Loading platform, length approx. 9,600 mm with rear bevel approx. 900 mm x 6°.
Loading platform behind gooseneck hydraulically liftable and lowerable, length approx. 3,000 mm, load capacity up to approx. 9,000 kg.
Ramps: DR-10-900-4920-GR-HV-AXS
One pair two-piece AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm.
Open grating surface.
Hydraulically foldable ramp tips.
Ramps are individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward.
Maximum load and approach angle as per technical data sheet: C470319
Maximum ramp angle with lowered platform: 9°
Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered.
Technical axle load: 12,000 kg
Air suspension with lift and lower valve.
Axle tools.
Gjdpfx Asizu Ntsa Hsca
Tyres: 235/75 R 17.5 3PMSF dual tyres. Manufacturer at our discretion. Load index 143/141J (144/144F)
Brake system: WABCO EBS-E braking system according to EU regulations. Without connection cable to the tractor unit.
Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" configuration according to EU regulations. (ASS 3)
Metallisation: Complete HRM metallisation (High Resistance Metallisation). Entire steel structure shot-blasted, then hot-dip refined with ZINACOR 850 (zinc 85% - alu 15%).
Painting 6-coat final treatment: Whole steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion promoter. Topcoat with 2 layers of 2-component (acrylic) paint, single-color to RAL palette as chosen, followed by sealing the cavities with special wax. Rims in silver. Multi-color and custom painting available at extra charge.
Steel construction: High-strength fine-grained steel construction. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa). Welders certified to DIN EN 287-1. MAG welding process per EN ISO 4063. Shielding gas M21 per EN ISO 14175.
Front wall made of steel, removable, approx. 400 mm high.
Connection panel for supply lines to the tractor unit, mounted at the height of the outer frame profile.
ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin.
24N connection as per ISO-1185
24S connection as per ISO-3731
15-pin connection as per ISO-12098
If your pin assignment differs from the ISO standard, please inform us.
"Anderson" socket on the front connection panel. Rema 78051-00 & Amp. 150 V.
Cable for electric-hydraulic unit and/or electric winch (
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR
Speed: 80 km/h legal
Gross vehicle weight: 49,500 kg 31,500 kg
Fifth wheel load: 18,000 kg
Axle load: 31,500 kg 31,500 kg
Gooseneck length approx.: 3,900 mm
Gooseneck width approx.: 2,480 mm
Kingpin turning radius to rear approx.: 2,100 mm
Saddle height loaded approx.: 1,205 mm
Loading platform length approx.: 9,600 mm
Extendable by approx.: *
Loading platform width approx.: 2,540 mm
Load height at max. payload approx.: 890 mm
Suspension stroke approx.: -55/+145 mm
Axle spacing: 1,360 mm
*Gross weight dependent on fifth wheel load: Yes
Special permit required if country-specific regulations are exceeded.
Technical Description
Gooseneck: Gooseneck in SNT design to optimize loading platform length, length approx. 3,900 mm, rear with bevel approx. 1,000 mm x 6°.
Technical fifth wheel load: 18,000 kg.
For tractor units: 4x2 and 6x2.
Loading platform: Loading platform, length approx. 9,600 mm with rear bevel approx. 900 mm x 6°.
Loading platform behind gooseneck hydraulically liftable and lowerable, length approx. 3,000 mm, load capacity up to approx. 9,000 kg.
Ramps: DR-10-900-4920-GR-HV-AXS
One pair two-piece AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm.
Open grating surface.
Hydraulically foldable ramp tips.
Ramps are individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward.
Maximum load and approach angle as per technical data sheet: C470319
Maximum ramp angle with lowered platform: 9°
Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered.
Technical axle load: 12,000 kg
Air suspension with lift and lower valve.
Axle tools.
Gjdpfx Asizu Ntsa Hsca
Tyres: 235/75 R 17.5 3PMSF dual tyres. Manufacturer at our discretion. Load index 143/141J (144/144F)
Brake system: WABCO EBS-E braking system according to EU regulations. Without connection cable to the tractor unit.
Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" configuration according to EU regulations. (ASS 3)
Metallisation: Complete HRM metallisation (High Resistance Metallisation). Entire steel structure shot-blasted, then hot-dip refined with ZINACOR 850 (zinc 85% - alu 15%).
Painting 6-coat final treatment: Whole steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion promoter. Topcoat with 2 layers of 2-component (acrylic) paint, single-color to RAL palette as chosen, followed by sealing the cavities with special wax. Rims in silver. Multi-color and custom painting available at extra charge.
Steel construction: High-strength fine-grained steel construction. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa). Welders certified to DIN EN 287-1. MAG welding process per EN ISO 4063. Shielding gas M21 per EN ISO 14175.
Front wall made of steel, removable, approx. 400 mm high.
Connection panel for supply lines to the tractor unit, mounted at the height of the outer frame profile.
ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin.
24N connection as per ISO-1185
24S connection as per ISO-3731
15-pin connection as per ISO-12098
If your pin assignment differs from the ISO standard, please inform us.
"Anderson" socket on the front connection panel. Rema 78051-00 & Amp. 150 V.
Cable for electric-hydraulic unit and/or electric winch (
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2019
İstek gönder
Telefon & Faks
+49 8191 ... ilanlar
Bu ilanlar da ilginizi çekebilir.
Küçük ilan
Sittensen
2.523 km
Tur otobüsü
MERCEDES-BENZTourismo 16 RHD/2, Euro 6, 50 Sitze, WC, Küche,
MERCEDES-BENZTourismo 16 RHD/2, Euro 6, 50 Sitze, WC, Küche,
Küçük ilan
Parma
2.155 km
Alçak yükleyici inşaat makineleri
carrellone collo doca rampe doppie nuovo ceylan
carrellone collo doca rampe doppie nuovo ceylan
Küçük ilan
Parma
2.155 km
Alçak yükleyici inşaat makineleri
carrellone ceylan 2assi 10.70m nuovo rampe
carrellone ceylan 2assi 10.70m nuovo rampe
Küçük ilan
Parma
2.155 km
Alçak yükleyici inşaat makineleri
carrellone collo doca ceylan rampe nuovo
carrellone collo doca ceylan rampe nuovo
Küçük ilan
Parma
2.155 km
Alçak yükleyici inşaat makineleri
CEYLAN carrellone rampe idrauliche nuovo
CEYLAN carrellone rampe idrauliche nuovo
Küçük ilan
Brodnica
1.997 km
Mobil vinç
LiebherrLTM 1030-2
LiebherrLTM 1030-2
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLESatteltieflader MAX100-N-3B-9.30-U
FAYMONVILLESatteltieflader MAX100-N-3B-9.30-U
Küçük ilan
Petershagen
2.512 km
Çalışma platformlu yarı römork
Wiese Stufensattel Tieflader mit Kran Fassi F545
Wiese Stufensattel Tieflader mit Kran Fassi F545
Küçük ilan
Essen
2.589 km
Faymonville Euromax
FaymonvilleEuromax
FaymonvilleEuromax
Küçük ilan
't Harde
2.701 km
Düşük yükleyici
FaymonvilleMultimax F-S43-1AAF
FaymonvilleMultimax F-S43-1AAF
İlanınız başarıyla silindi
Bir hata oluştu








































































































































