Düz yatak / brandaFliegl
SDS 350 MegaRunner
Düz yatak / branda
Fliegl
SDS 350 MegaRunner
sabit fiyat KDV hariç
€18.200
Durumu
Kullanılmış
Konum
Triptis 

Resimleri göster
Haritayı göster
Makineye ait bilgiler
- Makine tanımı:
- Düz yatak / branda
- Makine üreticisi:
- Fliegl
- Model:
- SDS 350 MegaRunner
- Seri numarası:
- 37ccfb14057f542c66638bc2e
- Durumu:
- kullanılmış
Fiyat ve Konum
sabit fiyat KDV hariç
€18.200
- Konum:
- Oberpöllnitzer Straße 8, 07819 Triptis, DE
Ara
Teknik detaylar
- Toplam ağırlık:
- 35.000 kg
- Boş ağırlık:
- 6.300 kg
- Azami yük ağırlığı:
- 28.700 kg
- Dingil konfigürasyonu:
- 3 dingil
- Ilk tescil:
- 10/2020
- Lastik boyutu:
- 385/55 r19,5
Teklif detayları
- Listeleme kimliği:
- A9058613
- Referans no.:
- 20653027
- Son güncelleme tarihi:
- 22.10.2024
Açıklama
Further Information
Fine-grained steel welded construction, fifth wheel plate with replaceable kingpin (type 2), 14 pairs of lashing eyes recessed in the outer frame, each rated at 2.5 t; outer frame with load-lock profile for attachment of tensioning straps. Note: Not suitable for vehicles with drop sides! 24 t two-speed landing gear, one-sided operation, with semi-round base and straight mounting plate, with compensating piston.
Two-stage pull-out ladder at the rear, side-mounted door retainers, chocks with holder, aluminium side underrun protection, galvanised steel rear underrun protection, quarter-circle mudguards in front of the first axle and behind each axle, anti-spray mud flaps behind each axle, rear impact guard, spare wheel holder for one spare wheel including fastening kit, plastic toolbox.
Dcedpfx Askyrlzsf Djn
SAF disc brake axles, air suspension.
2-line compressed air brake system, spring-actuated parking brake, 2 non-interchangeable coupling heads at the front, without connecting line, EBS (Electronic Braking System) with EBS socket at the front, no connecting cable. Note: The trailer may only be towed by towing vehicles which ensure the proper function of ABS!
With lift and lower valve, vehicle stability control system, TPMS Haldex tyre pressure monitoring system in conjunction with info center.
24 Volt, multi-chamber LED tail lights, lateral yellow LED marker lights, 2 white LED position lights at the front, 2 white/red LED lane marker lights at the rear, 2 x 7-pin non-interchangeable sockets at the front, without connecting cable, LED safelight, mounted at the top in the rear corner stanchions.
Floor: Approximately 30 mm thick phenolic plywood, cross joints with Omega inserts, mounted on longitudinal subframes for high point load bearing, suitable for forklift axle loads up to max. 7,100 kg
Front wall/corner stanchions: 2,600 mm high, corner stanchions in steel (volume design), release mechanism for curtain at the front wall, with internal steel impact guard at approx. 140 mm height from the bottom
Centre stanchions: 5 sliding stanchions adjustable along the entire length, with quadruple socket pockets and long lower pocket (3 on FR-right, 2 on FR-left), 5 stanchion positions (3 on FR-right, 2 on FR-left), aluminium insert slats
Rear corner stanchions in steel up to the lower roof edge, curtain attachment with round tube and tensioning ratchet, double-leaf rear portal doors with two internal swivelling rod locks each
Curtain with welded horizontal and vertical belts, reinforcements for stanchions, quick lock system for the side curtain with central lock, one-sided in FR-left, stainless steel tension locks in FR-right, curtain with integrated vertical slats as a load-securing curtain, one-sided in FR-left (then only 2 pairs of centre stanchions in FR-left)
Roof: Sliding roof, end lift at rear can be folded up, roof can be slid from rear to front, L-roof beam for automotive industry, internal width between roof beams approx. 2,490 mm, curtain colour: white, mechanical lifting roof can be raised by approx. 380 mm, lifting roof can be opened with doors closed
Country of registration: Germany, type approval according to EC 2007/46, load securing certificate to EN 12642 XL, 24/7 service hotline, prepared for single-line number plate holder, ECE-70 warning plate, reflective strips: white, along bottom of side curtain and in upper corners white, red reflective strip all around rear portal.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Fine-grained steel welded construction, fifth wheel plate with replaceable kingpin (type 2), 14 pairs of lashing eyes recessed in the outer frame, each rated at 2.5 t; outer frame with load-lock profile for attachment of tensioning straps. Note: Not suitable for vehicles with drop sides! 24 t two-speed landing gear, one-sided operation, with semi-round base and straight mounting plate, with compensating piston.
Two-stage pull-out ladder at the rear, side-mounted door retainers, chocks with holder, aluminium side underrun protection, galvanised steel rear underrun protection, quarter-circle mudguards in front of the first axle and behind each axle, anti-spray mud flaps behind each axle, rear impact guard, spare wheel holder for one spare wheel including fastening kit, plastic toolbox.
Dcedpfx Askyrlzsf Djn
SAF disc brake axles, air suspension.
2-line compressed air brake system, spring-actuated parking brake, 2 non-interchangeable coupling heads at the front, without connecting line, EBS (Electronic Braking System) with EBS socket at the front, no connecting cable. Note: The trailer may only be towed by towing vehicles which ensure the proper function of ABS!
With lift and lower valve, vehicle stability control system, TPMS Haldex tyre pressure monitoring system in conjunction with info center.
24 Volt, multi-chamber LED tail lights, lateral yellow LED marker lights, 2 white LED position lights at the front, 2 white/red LED lane marker lights at the rear, 2 x 7-pin non-interchangeable sockets at the front, without connecting cable, LED safelight, mounted at the top in the rear corner stanchions.
Floor: Approximately 30 mm thick phenolic plywood, cross joints with Omega inserts, mounted on longitudinal subframes for high point load bearing, suitable for forklift axle loads up to max. 7,100 kg
Front wall/corner stanchions: 2,600 mm high, corner stanchions in steel (volume design), release mechanism for curtain at the front wall, with internal steel impact guard at approx. 140 mm height from the bottom
Centre stanchions: 5 sliding stanchions adjustable along the entire length, with quadruple socket pockets and long lower pocket (3 on FR-right, 2 on FR-left), 5 stanchion positions (3 on FR-right, 2 on FR-left), aluminium insert slats
Rear corner stanchions in steel up to the lower roof edge, curtain attachment with round tube and tensioning ratchet, double-leaf rear portal doors with two internal swivelling rod locks each
Curtain with welded horizontal and vertical belts, reinforcements for stanchions, quick lock system for the side curtain with central lock, one-sided in FR-left, stainless steel tension locks in FR-right, curtain with integrated vertical slats as a load-securing curtain, one-sided in FR-left (then only 2 pairs of centre stanchions in FR-left)
Roof: Sliding roof, end lift at rear can be folded up, roof can be slid from rear to front, L-roof beam for automotive industry, internal width between roof beams approx. 2,490 mm, curtain colour: white, mechanical lifting roof can be raised by approx. 380 mm, lifting roof can be opened with doors closed
Country of registration: Germany, type approval according to EC 2007/46, load securing certificate to EN 12642 XL, 24/7 service hotline, prepared for single-line number plate holder, ECE-70 warning plate, reflective strips: white, along bottom of side curtain and in upper corners white, red reflective strip all around rear portal.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2006
İstek gönder
Telefon & Faks
+49 36482... ilanlar
Bu ilanlar da ilginizi çekebilir.
küçük ilan

2.248 km
Flatbed/branda
FlieglSDS 350 MegaRunner
FlieglSDS 350 MegaRunner
İlanınız başarıyla silindi
Bir hata oluştu