Kipper

Fliegl TSK 118 5,0 m

Further information
Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tip bearing, gearbox support foot at the front, foldable rear support, wheel chocks with holders, steel underrun protection, rear mudflap covering the full width (not available with forklift holder), quarter shell mudguards, spare wheel, same brand as main tyres, steel rim, loose, plastic toolbox with shelf, width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (lock not included). Note: Dropside contacts the storage box when folded down, lockable storage compartment for loading ramps underneath the loading area, pair of aluminium ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg (mounting rail for ramps at the rear).

Drawbar with certified 40 mm towing eye, height adjustable via spindle, max. adjustment range 300 mm

BPW drum brake axles, axles/chassis laser aligned to reduce tyre wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle-load compensation (rocker balancing)

2-line compressed air brake system, colour-coded piping for easy servicing, manual spindle parking brake. Integral air reservoir, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by tractors that guarantee the effectiveness of the ABS. Duomatic coupling at the front, with connecting line to the tractor unit.

24 Volt, multi-chamber lights, side marker LEDs in yellow, 2 white position lights at the front, 2 white/red track markers at the rear, 1 x 15-pin plug at the front, with connecting cable.

Three-way tipper system, hydraulic multi-piston press with stroke limiter and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, throttle to be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, including connecting hose; operation hydraulically via truck PTO.

Hodpjk E Tdaefx Ad Renu
Sturdy tipping platform with 4 mm steel plate floor, steel dropside body, continuous sidewalls, foldable and pendulum-mounted with central bottom lock. Removable rear corner posts. Tailboard foldable and pendulum-mounted, with central bottom lock, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Dropside return springs (not available with split sidewalls), platform width 2,420 mm, pair of lashing eyes in the floor, each rated at 5 tonnes.

Operating instructions: The stated gross weight is technically possible; depending on the load, the gross weight may not be achieved while complying with permissible axle, support, and kingpin loads. (Poor driving and trailing behavior possible due to improper load distribution)

Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG-FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.