Diğer

Fliegl ZPS 200 K Jumbo Z

Further information
Chassis Turntable Skip Loader
Fine-grain steel welded construction
Container locking system:
- 2 pairs of locking hooks recessed into the floor
- Pneumatic operation
The container locking system is designed as an internal 2-point mechanism; locking of skip containers with internal bars is not possible (designed for the transport of roll-off containers with subframes according to DIN 30722).
Note! At the start of the roller trough at the front, the container must be pushed on completely flat!
Longitudinal guide rails, laterally adjustable and removable, rails approx. 115 mm high
Turntable with heavy-duty ball bearing slewing ring
8 pairs of lashing mushrooms recessed into the upper and side parts of the outer frame, each rated at 5 t
7 pairs of stake pockets recessed into the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t lashing rings, not included)
2 wheel chocks with holder
Aluminium side underrun protection
Steel rear underrun protection
Quarter section mudguards according to EC standards
With anti-spray mudflaps to EC Directive
Drawbar arrangement for turntable trailers
Drawbar with tested 40 mm towing eye
Axles & Suspension
SAF drum brake axles
Axles/chassis laser-aligned to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bearings
Wheels and Tires
235 / 75 R 17.5
Manufacturer’s choice
Steel wheels in twin arrangement, factory silver
Braking System
2-line compressed air braking system
Spring-loaded parking brake
2 interchangeable coupling heads at front, with connecting lines to towing vehicle,
ABS and ALB, with ABS socket at front, with connection cable
Attention: The trailer may only be towed by tractors that ensure proper ABS function!
Electrics
24 Volt, multi-chamber tail lights, yellow LED side marker lighting
2 white position lights at front
2 white/red lane marker lights at rear
2 x 7-pin interchangeable plugs at front, with connecting cable
Floor
Steel floor
Container roller trough at front, recessed in floor, for roll-off containers 5,000 – 7,000 mm length
Note: Minor floor deformation due to welding distortion possible!
Loading ramps
Lockable storage space for loading ramps beneath bed
Operating instructions
For 10,000 kg axle loads, a special permit is required. The permit must be applied for separately in each federal state; there is no guarantee from the legislator for 20 t permissible total weight. Customer’s risk.
The specified total weight is technically possible; depending on the type of load, the permissible total weight may not be achievable while adhering to axle/support and kingpin loads (impaired driving and tracking possible from poor load distribution).
Country of registration / Plates
Iijdpfx Adji Ri Nus Roh
Country of registration: Germany
With Dekra inspection and certificate (according to §13 EC-FGV)
24/7 Service Hotline
Prepared for one-line number plate holder
Contour marking with reflective tape to ECE R 048, white lateral and red rear
Warning panel according to ECE-70
Paintwork
Frame DB 7350 Nova Grey
15-year warranty against rust-through
Note: Floor deformation from hot-dip galvanization possible!
Drawbar KTL black
Important: Archive photos!

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.