Teleskopik çalışma platformuJLG
Toucan 12E+

Makineye ait bilgiler
- Makine tanımı:
- Teleskopik çalışma platformu
- Makine üreticisi:
- JLG
- Model:
- Toucan 12E+
- Durumu:
- işlem için hazır (kullanılmış)
- Işlevsellik:
- tamamen fonksiyonel
Teknik detaylar
- Yük kapasitesi:
- 200 kg
- Platform uzunluğu:
- 700 mm
- Platform genişliği:
- 1.050 mm
- Toplam ağırlık:
- 4.900 kg
- Çalışma yüksekliği:
- 12.650 mm
tedarik
- Konum:
- Bremen, Almanya
– Mesafe: yaklaşık 2.553 km
- Mevcudiyet:
- müzayede bittikten hemen sonra
- Teslimat şartları:
- FCA
ücretsiz
ücretsiz
Açıklama
TECHNICAL DETAILS
Working height: 12.65 m
Lateral outreach (standard platform): 6.05 m
Up-and-over clearance: 7.12 m
Slewing range: 345°
Platform capacity: 200 kg
Articulated jib length: 4.14 m
Articulated jib movement range: 120° (+60° / -60°)
Platform dimensions (L × W, standard platform): 0.70 × 1.05 m
Platform width: 1.20 m
Rear overhang: 13 cm
Transport height: 1.99 m
Transport length (standard platform): 3.65 m
Wheelbase: 1.60 m
Ground clearance: 10 cm
Max. permissible ground pressure: 14.0 kg/cm²
Drive speed, stowed: 6.0 km/h
Outside turning radius: 2.60 m
Inside turning radius: 0.75 m
Gradeability: 30 %
MACHINE DETAILS
Machine weight (standard platform): 4,900 kg
Tire size (non-marking): 457 × 178 mm
Operating voltage: 48 V DC
Batteries (deep cycle): 48 V – 260 Ah
Charger: On-board 110 V / 230 V HF
Drive motors: 2 AC motors
Electric motor (pump): 3.5 kW – 48 V DC
Hydraulic oil volume: 15 l
EQUIPMENT
Steel platform
Sliding bar at rear access
Proportional drive and slew control via joystick with integrated thumb steering switch
Mini-joysticks for proportional boom, telescopic, and articulated arm functions
Large platform console with function enable
Load monitoring system
AC power cable to platform
Large tool tray
Direct electric two-wheel drive
Brushless AC drive motors
Automatic energy saving function in idle mode
Low charge function with shutdown
On-board diagnostic system with integrated display
Automatic rear wheel brakes
Moulded polyester covers
Robust steel roller mast
Chain slack detection system
Lashing and lifting eyes
Ground control selector switch with key lock
Battery discharge indicator
Hour meter
Horn
Drive direction orientation system
Anchor points for safety harnesses
Manual lowering system
Passive pothole protection system
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Belgeler
Ödeme işlemleri
- Satın alma ek maliyetleri:
- 9 %
- Ödeme koşulları:
- %100 peşin ödeme
- Ödeme yöntemleri:
Banka havalesi
Teklif detayları
- Listeleme kimliği:
- A21674173
- Referans no.:
- AUC-2603306
- Son güncelleme tarihi:
- 08.04.2026
- Özel teklif:
- yalnızca müzayedede mevcut
inceleme
Bremen JLGX20J+
Bremen GenieGS4047
Bremen GenieZ34/22N
Bremen JLGToucan 10E-L
Bremen GenieGS1932
Bremen JLGE450AJ
Hedel JLGToucan 12E Plus Hoogwerker Masthoogwerker
Stralsund JLGToucan T 12 E+ (30470)
Schierling JLGToucan 12E+
Schierling JLGToucan 12E+
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.













































































































