Çalışma platformlu yarı römork

KÖGEL Multi Chassis, verstärkt

You can find our complete range of vehicles, including units available immediately or at short notice, on our website.

Extract from the equipment list. Full equipment details available on request.

Chassis:
* Standard ladder-type frame in steel lightweight construction with continuous crossmembers
* Chassis frame with pre-camber
* Coupling plate approx. 8 mm thick, with 2-inch kingpin in accordance with DIN 74080 / ISO 337
* Axle lift mechanism on axle 1
* Three-axle SAF INTRADISC axle assembly with 430 mm disc brakes, offset 120 mm (ET 120)
* Air suspension with approx. 180 mm travel

Tyres:
* Wheels with internal sensors in line with UN ECE R141
* 6x 385/65 R 22.5 UNIROYAL TH 506 tyres, steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120)

Chassis attachments:
* Mechanical landing legs with compensation foot, approx. 24 t lifting capacity, single-sided operation on the right (in direction of travel)
* Storage box for: 10 side boards, drop-in stakes and tailgate; fully enclosed, splash-proof, also serves as side guard
* 2 plastic toolboxes, waterproof, inside dimensions approx. 545 x 400 x 400 mm, mounted at rear, one left and one right

Brake / air suspension system:
* EBS system 2S/2M with stability control (includes ABS/ALB function)
* EBS connector ISO 7638 (without connection cables)
* Parking brake as spring-loaded brake, external pneumatic connections as well as external EBS diagnostic port via ISO 7638 connector
* WABCO EBS system
* Air suspension system incl. 1 lift and lower valve, installed on the left behind the axle assembly
* Driving level adjusts automatically
* 2 foolproof coupling heads at the front ISO 1728
* Air tanks for brake system and air reserve made of steel (EN 286-2)

Floor:
* Floor panels approx. 30 mm thick, multiply-bonded plywood
* Floor fully sealed all round
* Stake pockets for square insert stakes approx. 80 x 80 mm

Front wall:
* Storage for up to 14 square insert stakes approx. 80 x 80 mm (length 1,990 mm) on the inside of the front wall
* Approx. 2,000 mm high with steel volume corner stakes, with profiled steel sheet, bolted/riveted to frame
* 2 pairs of lashing points (permitted lashing force approx. 1,000 kg per ring) on the front wall per EN 12640
* NOTE: If the front wall is used for load securing, suitable lashing straps must be used for tensioning when the vehicle is operated without side boards and tailgate.

Rear wall:
* WARNING: Hinge mounts for foldable rear wall 600 mm as well as stake holders for foldable rear corner posts, but WITHOUT foldable rear wall and rear corner posts

Side wall:
* VarioFix steel perforated outer frame; 4 pairs of stake holders for drop-in stakes on the outer frame (evenly distributed), WITHOUT drop-in stakes; pairs of lashing rings in the outer frame (per EN 12640), permitted pull force approx. 5,000 kg per ring

Side boards:
* WARNING: Hinge mounts for 5 pairs of side boards on the outer frame, as well as side board stops on the front corner posts, but WITHOUT the 5 pairs of side boards

Electrics / electronics:
* Steel light carrier located above the underrun protection
Kledpfx Aey Trwuof Ejt
* KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED outline markers and front reflectors, flashing LED side marking lights, Superseal and bayonet connectors on the lights
* 2 LED outline lights with pendulum bracket
* 2 multi-chamber tail lights
* Permanently mounted adapter box with 2x 7-pin sockets (1 x ISO 1185 / 1x ...

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.