Çalışma platformlu yarı römork

KÖGEL Multi Chassis. verstärkt, Rungen

You can find our complete range of vehicles, including those available immediately or at short notice, on our website.

Selection of equipment. Full equipment details available on request.

Chassis:
* Standard ladder frame made of lightweight steel construction with through cross members
* With chassis frame camber
* Coupling plate approx. 8 mm thick, with a 2-inch kingpin as per DIN 74080 / ISO 337

Running Gear:
* Axle lift mechanism on axle 1
* Fully automatic, load-dependent axle lift control
* Traction assist: activation by pressing the brake 3x, 30% overload allowed up to a speed of 25 km/h
* Manufacturer of choice: Kögel - three-axle unit, with disc brakes approx. Ø 430 mm
* Air suspension with approx. 180 mm lift

Vehicle Tyres:
* Wheels with internal sensors according to UN ECE R141
* Tyres: Six 385/65 R 22.5 BRIDGESTONE R179 XM 160 K (158 L)
* 6 steel rims 22.5 x 11.75, inset approx. 120 mm (ET 120)

Chassis Attachments:
* Landing legs (manufacturer optional by Kögel), mechanical with compensating foot, approx. 24 t lifting capacity. Single-sided operation on the right in direction of travel
* Spray suppression system (spray mist suppression) as per Regulation (EU) No. 109/2011 for a three-axle group with 385/65 R22.5 tyres, consisting of 1 pair of quarter-round mudguards in front of axles, 1 pair straight mudguards with spray flaps between 1st and 2nd axle, and 1 pair quarter-round mudguards with spray flaps behind axles
* 2 wheel chocks with bracket
* Lateral guard as per ECE-R73
Kodpfx Agsyvnd Aogoww
* 2 plastic toolboxes, waterproof, internal dimensions approx. 545 x 400 x 400 mm. Installed at the rear: 1 left and 1 right
* Extendable access ladder, rear right
* High, rigid steel rear underrun protection as per ECE-R58
* 1 pair each of extendable warning panels for oversized loads, retroreflective red/white, with LED lighting, spiral cable, and plug connector. Arranged at front and rear of the vehicle

Brake / Air Suspension System:
* EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without connecting lines), parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug
* EBS system (manufacturer of choice by Kögel)
* Air suspension system incl. 1 raise/lower valve, installed to the left behind the axle assembly. Driving mode sets automatically
* 2 foolproof coupling heads front ISO 1728
* Air tanks for brake system and air supply made of steel (EN 286-2)

Floor:
* Board floor approx. 30 mm thick
* Floor caulked all around
* Stake pockets for square insert stakes approx. 80 x 80 mm

Front Wall:
* Storage for up to 20 square insert stakes approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall
* Front wall approx. 2,000 mm high with steel corner posts, profiled steel sheet, bolted/riveted to frame
* 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) at the front wall according to EN 12640

Side Wall:
* VarioFix steel lashing outside frame
* 21 pairs of lashing brackets in the outer frame (according to EN 12640), permissible traction force approx. 5,000 kg per ring

Bumper Protection:
* 1 pair of steel bump stops approx. 160x85x85mm mounted on external end plate
* Crosswise galvanized steel angle as forklift protection, plus central lock cam protection, mounted on rear end plate

Electrics / Electronics:
* Steel lighting bar mounted above the underrun protection,

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.