Silindirik taşlama makinesi

Karstens

Üretim yılı: 1997, Durumu: işlem için hazır (kullanılmış), Bir CNC silindirik taşlama makinesi Karstens mevcuttur; buna Knoll VRF 150/620 (1997) soğutma sistemi ve KGH KFM-1200 (2000) emülsiyon ayırıcı dahildir. Taşlama boyu: 650 mm, punta yüksekliği: 190 mm, maksimum taşlama çapı: 380 mm, merkezler arası/makarada maksimum iş parçası ağırlığı: 250 kg/100 kg, masa salınımı: +/-12,5°, masa ilerlemesi: 4 m/dk, makine ölçüleri X/Y/Z: yaklaşık 3250 mm/2150 mm/1800 mm, ağırlık: yaklaşık 3500 kg, kontrol ünitesi: CNC 20. Yerinde inceleme mümkündür. Gedpfx Aeytgnysfisip

Durumu: iyi (kullanılmış), Üretim yılı: 2008, torna boyu: 2.000 mm, X ekseni ilerleme hızı: 3.000 m/dak, Z ekseni ilerleme hızı: 3.000 m/dak, HeidenHain ND780 3-axis digital readout Variomatic speed range Steady rest Multifix quick-change toolpost system Turning length: 2000mm Swing over bed Ø: 830mm Swing over carriage: 420mm Swing in gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Quill diameter: 105mm Quill stroke: 225mm Spindle mount: 6MT Power: 15kW Spindle speed: 2000rpm Feed rate X-axis: 3000mm/min Feed rate Z-axis: 3000mm/min Workpiece weight: 2400kg Length: 3700mm Width: 1900mm Height: 1900mm Weight: 5500kg Gisdpjxf Ey Rjfx Afiop Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is offered in good faith, however, accuracy cannot be guaranteed. Therefore, this does not constitute representation or contractual terms. We recommend verifying all important details independently.

Durumu: iyi (kullanılmış), Üretim yılı: 1974, Dijital ekran Öğütme çapı 250 mm Öğütme uzunluğu 650 mm Godpfx Afjwpya Neioip Aksesuarlar

Durumu: mükemmel (kullanılmış), Üretim yılı: 1980, Karstens K11 1000 This Karstens K11 comes from a university and has seen very little use. All cables and hoses in the wet area have been replaced. The machine has extremely low operating hours. As we specialize in Karstens cylindrical grinding machines, we can provide complete service (electrical and mechanical) for the machine after purchase. Technical data: Distance between centers: 1000 mm Center height: 180 mm Workpiece weight: 70 kg between centers, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MT4, speed continuously variable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MT4, quill stroke 45 mm Tailstock rest next to Z-axis table Quill force: 200-600 N Table swivel: 12.5 degrees Bfo0atkpzs Adjustable stroke feed spindle: 80 mm Rapid traverse stroke: 50 mm Coarse adjustment air cushion: 280 mm External grinding spindle motor: 4 kW Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 0.55 kW Net machine weight: 3500 kg Increment feed drive via DC motor Air-cushioned rapid adjustment of the grinding spindle head for quick and secure positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operation, feed movement controlled by rotary switch: Rapid approach, rapid return, grinding mode, feed stop, mym-feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding positions Workpiece spindle head with continuously variable drive for rotating and locking spindle. Feed control for longitudinal and plunge grinding, inputs for retraction, feed rates, infeed amounts, dwell times, clearance strokes Digital display for X-axis by Heidenhain Gedpfx Afjh Rit Esisip Paper band filter unit can be offered upon request. Comparable to Weiss/ EMAG/ GP cylindrical grinders/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat

Durumu: yeni, TC 165 x 750V Çizim MIOTAL® TC 180 x 1000'i göstermektedir Merkez mesafesi: 750 mm Merkez yüksekliği: 165 mm Yatak üzerinde salınım çapı: Ø 330 mm Yatak genişliği: 190 mm Çapraz kızak hareket mesafesi: 160 mm Üst kızak hareket mesafesi: 90 mm Mil bağlantısı: DIN 55029 (Camlock) D 1 - 4 İş mili deliği: Ø 40 mm Maks. Ayna çapı: Ø 200 mm İş mili hızı, kademesiz değişken: 30 - 2000 1/dak Mekanik besleme kademeleri: 3 Motor gücü: 2,2 kW Uzunlamasına beslemeler Z: (40) 0,044 - 1,96 mm/dev Yüzey beslemeleri X: (40) 0,022 - 0,98 mm/dev Metrik diş: (32) 0,4 - 7,0 mm İplik inç: (32) 4 - 56 Gg/inç Diş modülü: (32) 0,4 - 7,0 Çap dişi: (32) 7,5 - 112 Punta çapı: Ø 40 mm Punta iç konikliği: MK 3 Quill stroku: 100 mm Yanal ayar: ± 10 mm Ağırlık, yaklaşık: 650 kg Özellikler: - DIN'e göre kabul protokolü - Hassas, sertleştirilmiş ve taşlanmış kılavuzlar - Uzun ömürlü kalite için devridaim yağlamalı sağlam mesnet, hassas rulman montajlı iş mili, sertleştirilmiş ve taşlanmış dişliler - Elektromanyetik iş mili freni (TC), elektrikli frenleme cihazlı frekans dönüştürücü (V modelleri) - MEEHANITE kaliteli dökümden yapılmış, gerilimsiz tavlanmış ve son derece düzgün çalışma için çok yivli, burulmaya dayanıklı makine yatakları - SIEMENS/SCHNEIDER'den elektrikli ekipmanlar - Besleme dişli kutusu için aşırı yük koruması Gjdpfx Ajir Igwsfioip - Ana iş mili için darbe düğmesi - CE / IEC'nin yanı sıra Almanca dokümantasyon ve Almanca servis Temel ekipman (standart aksesuarlar): - Sıçrama korumalı arka panelli makine sehpası - 3 çeneli torna aynası - 4 katlı çelik tutucu - Mekanik fren tertibatlı ayak pedalı - Soğutma sıvısı cihazı - Avrupa güvenlik standartları CE'ye uygun ayna koruması ve mil kapağı - 1 Ana iş mili için sabit merkez noktası - 1 Sabit merkez noktası MK3 - 1 Test raporu - CE'ye göre güvenlik cihazları ve elektrikli ekipmanlar - Ana mil için redüksiyon kovanı Çalışma aleti Bu torna için mevcut seçenekler: - 3 eksenli dijital okuma - Hızlı değiştirilebilir tutucu sistemi Multifix vites kutusu versiyonu olarak da mevcuttur

Durumu: yeni, We offer spare parts of all kinds for your conventional or CNC Karstens/EMAG WEISS/GP cylindrical grinding machine, including tailstocks, workpiece spindle stocks, grinding spindle stocks, ball screws, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), ECKELMANN controls, bellows, bearings, new and used K11/K21 infeed controls, Z-axis reversing blocks for exchange, and more. We service machines from model year 1955 onwards: ASA-ASE-K10-K11-K12-K13-K16-K19-K21-K22-K23-K24-K25-K26-K27-K28- K29-K33-K35-K37-K50-K51-K52-K53-K57-W11-W21 and all GP cylindrical grinding machines built on the Karstens platform. Comparable/ EMAG-WEISS/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat Gjdpfoup Aikjx Afisip

Durumu: yeni, Her türlü Karstens/GP konvansiyonel veya CNC silindirik taşlama makineniz için, arka puntadan iş parçası iş mili bloğuna, taşlama mili bloğundan bilyalı vidalar, cam cetveller, taşlama taşı flanşları, tahrik motorları, eksen tahrikleri (BOSCH SIEMENS), körükler, rulmanlar, K11/K21 otomatik ilerleme kontrol üniteleri (yeni ve kullanılmış), Z ekseni yönlendirme blokları değişimli olmak üzere her türlü yedek parça temini sunuyoruz. Gjdpfx Aeraibvefijip Ayrıca Weiss, EMAG, GP-silindirik taşlama makineleri, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat, Bahmüller ve Fortuna gibi markalar için de yedek parça tedariği sağlanmaktadır.

Durumu: mükemmel (kullanılmış), Knuth UFM 2 Universal Milling Machine Technical Data Travel X-axis (manual): 800 mm Travel X-axis: 750 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Table size: 1320x320 mm T-slots: 5x14x63 mm Feeds Y-axis travel (8): 20 - 360 mm/min Z-axis travel: 600 mm/min Spindle speed (12): 58 - 1800 rpm Vertical spindle taper: SK 40 Distance spindle nose to table: 0 - 400 mm Head swivel: 45° Horizontal spindle taper: SK 50 Drive Main motor power: 4 kW Z-axis motor power: 0.75 kW Feed motor power: 0.55 kW Coolant pump motor: 0.09 kW Coolant pump capacity: 25 l/min Dimensions and Weight Dimensions: 1900x1720x1750 mm Gsdpfenfu Rijx Afioip Weight: 2100 kg Financing through our bank is available. komplett-konzept.leasingo.de You will find more items – both new and used – in our shop! International shipping costs on request!

Durumu: yenilenmiş (kullanılmış), Üretim yılı: 2026, Karstens K11 1000 Full Equipment Gedsh Riwdjpfx Afioip The cylindrical grinding machine has been completely overhauled by PS-Karstens. The machine has been inspected and is in excellent condition. As we specialize in Karstens cylindrical grinding machines, we can offer you comprehensive service (electrical and mechanical) for the machine after your purchase. Technical specifications: • Center distance: 1000 mm • Center height: 180 mm • Workpiece weight: 100 kg between centers (unsupported), 250 kg between centers (supported) • Grinding wheel diameter: 400 mm • Workpiece spindle: MK 4, stepless speed adjustment 30-450 rpm, swivel range 0 - 90° • Tailstock: MK4, quill stroke 45 mm, fine adjustment with micrometer • Quill force: 200-600 N, hydraulically operated via foot pedal • Table swivel: 10 degrees • Infeed spindle travel: 80 mm • Rapid traverse: 50 mm • Coarse adjustment (air cushion): 280 mm • External grinding spindle motor: 4 kW • Internal grinding spindle motor: 2.2 kW • Workpiece spindle motor: 0.55 kW • Net machine weight: 3,800 kg The infeed is driven by a DC motor. Air-cushion supported rapid adjustment of the grinding spindle head enables quick and safe positioning at the grinding point. Separate drives for external and internal grinding spindles. Fully automatic work cycle: infeed movement controlled via cam switch: rapid approach, rapid return, grinding operation, infeed stop, micron-level infeed. Automatic longitudinal grinding cycle. Central coolant supply for all grinding zones. Workpiece spindle head with steplessly adjustable drive for both live and lockable spindle operation. Infeed control for longitudinal and plunge grinding, programmable for return, infeed amounts, feeds, spark-out times, and idle strokes. Digital readouts for grinding spindle (B axis), workpiece spindle, X-axis, Z-axis by HEIDENHAIN. Paper band filtration unit, approx. 250 L capacity. Comparable to Weiss / EMAG / GP cylindrical grinding machines / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat / Bahmüller / Fortuna.

Durumu: yeni gibi (sergi parçası), Üretim yılı: 2026, Centre height: 181 mm Centre width: 650 mm Maximum grindable workpiece diameter: 360 mm Maximum load between centers (unsupported): 1000 N (100 kg) Maximum load between centers: 3000 N (300 kg) Z-axis Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis Feed spindle travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment, air cushion: 280 mm Feed drive via DC motor Rapid feed rate: 48 mm/min/Ø Gisdpfxetqf Sqj Afiep Infeed cycle: Plunge grinding / Longitudinal grinding 4 pre-selectable speeds (mm/min/Ø): 0.01-48 4 pre-selectable feed increments (mm): 0.001-0.1 Spark-out during shoulder grinding (s): 0-99 0-99 strokes Creep feed (tip infeed) (mm/Ø): 0.001 Grinding spindle head universal, swiveling: 0–180° Grinding wheel, external: D x width x bore (mm): 500 x 100 x 127 or 203.2 Grinding wheel, surface (option) D (mm): 250 x 32 x 76.2 Grinding wheel, internal (option) D (mm): (2–250) Drive power: external, surface (kW): 5.5 (7.5) Drive power, internal (kW): 2.2 Peripheral speed, external (m/s): 35 (50) Grinding wheel wear, external (mm/Ø): 160 Guard width (mm): 100 Grinding spindle diameter (mm): 60 Internal spindle mounting (mm): 80 (100) Workpiece spindle head: Stepless drive control: Mk 4 1/min: 30–270/50–450 Workpiece spindle lockable Spindle mounting (mm): MK 4/24 Spindle nose for flange mounting: MK 4 mm, cylindrical Ø63H6 x 6 Workpiece spindle head swiveling on turning part: 0–90° Tailstock: Quill mounting / quill diameter (mm): MK 4750 Quill stroke (mm): 45 Quill force (N): 100–800/250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total connected load: 6.5 – 10 kW Grinding spindle head: 5.5 (7.5) kW Workpiece spindle head: 0.55 (1.1) kW Coolant cleaning: 0.75 – 2.2 kW Lubrication pump guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 liters Pneumatics: 6 bar Comparable to Weiss / EMAG / GP cylindrical grinding machines / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat / Bahmüller / Fortuna

Üretim yılı: 2015, Durumu: mükemmel (kullanılmış), VMC 3 eksenli AMS süper dart üretim yılı 2015 Kontrol FANUC MAKİNE KAPASİTESİ X - Eksen Hareketi mm 600 Gisdpfx Ajkvpnmjfiop Y - Eksen Hareketi mm 450 Z - Eksen Hareketi mm 500 Mesafe İş Mili Yüzünden Tabla Üstüne mm 235 - 735 Masa boyutu mm 900 x 450 Masa üzerindeki maks. yük kgf 400 maksimum iş mili hızı 15000rpm BT30 iş mili boyunca yüksek soğutma otomatik takım değiştirici 20 takım ağırlık makinesi 4500kg pompslu makine talaş konveyörü ile düşük saatli makine

Durumu: yeni gibi (sergi parçası), Üretim yılı: 2026, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical specifications: - Distance between centers: 750 mm - Center height: 180 mm (250 mm optional) - Workpiece weight: 100 kg (between centers), 250 kg (between centers) - Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) - Workpiece spindle: MK 4, infinitely variable speed control 30–450 rpm, swiveling range 0–90° - Tailstock: MK4, quill stroke 45 mm, cylindrical correction - Quill force: 200–600 N manual (up to 2500 N available, adjustable as an option) - Table swivel: 12.5° - Traverse of infeed spindle: 80 mm - Rapid traverse: 50 mm - Coarse adjustment (air cushion): 280 mm - External grinding spindle motor: 4 kW (5.5 kW optional) - Infinitely variable speed adjustment of grinding wheel via potentiometer - Internal grinding spindle motor: 2.2 kW - Workpiece spindle motor: 1.1 kW - Hydraulic motor: 1.5 kW - Lubrication motor: 0.1 kW - Hydraulic tank: 80 liters - Machine weight: net 3500 kg - Infeed drive via DC motor - Air-cushioned rapid adjustment of the grinding spindle stock for fast and safe positioning of the grinding location - Separate drive for spindles for both external and internal grinding - Fully automatic operating sequence, infeed movement via rose switch: rapid approach, rapid return, grinding operation, infeed stop, micron infeed - Automatic longitudinal grinding cycle - Central coolant supply to all grinding stations - Workpiece headstock with infinitely variable drive for rotating and clamping spindle - Digital infeed control with Siemens panel and Siemens PLC for longitudinal and plunge grinding, programmable for retraction, infeed amounts, feed rates, spark-out times, idle strokes, compatible with the old Karstens infeed control, with color Siemens touch panel - Scale on X and Z axes by HEIDENHAIN Giodpeiv Audjfx Afiop Comparable to: Weiss / EMAG / GP cylindrical grinding machines / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat / Bahmüller / Fortuna

Durumu: yeni gibi (sergi parçası), Üretim yılı: 2026, Karstens K11 1000 Premium Retrofit Universal Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: - Centre distance: 1100 mm - Centre height: 180 mm / (250 mm optional) - Workpiece weight: 100 kg between centers, 300 kg supported - Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) - Workpiece spindle: Morse taper 4 (MK 4), infinitely variable speed 30-450 rpm, swiveling range 0 - 90° - Tailstock: MK4, quill stroke 45 mm - Quill force: 200-600 N manual, (up to 2500 N adjustable, optional) - Table swivel angle: 10 degrees - Cross-slide travel: 80 mm - Rapid traverse: 50 mm - Coarse air cushion adjustment: 280 mm - External grinding spindle motor: 4 kW / (5.5 kW optional) - Continuously variable grinding wheel speed control via potentiometer - Internal grinding spindle motor: 2.2 kW - Workpiece spindle motor: 1.1 kW - Hydraulic motor: 1.5 kW - Lubrication motor: 0.1 kW - Hydraulic tank: 80 liters - Machine weight: net 3800 kg - Cross-feed driven by DC motor Giodpfx Afoh Rimmjiop - Air-cushion supported rapid positioning of the grinding spindle stock for fast and precise approach to the grinding position. - Separate drives for external and internal grinding spindles. - Fully automatic operation sequence, in-feed movement via rotary cam switch: rapid approach, rapid retraction, grinding mode, in-feed stop, mym(feeding). - Automatic longitudinal grinding cycle - Central coolant supply for all grinding points - Workpiece headstock with infinitely variable drive for both rotating and clamping modes. - New digital in-feed control with Siemens panel and Siemens PLC for longitudinal and plunge grinding, input for retraction, in-feed amounts, feed rates, spark-out times, idle strokes; compatible with old Karstens in-feed control, equipped with color Siemens touch panel - Comparable to Weiss/EMAG/GP-Cylindrical Grinding Machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Durumu: yeni, WMD45 - ROGI Matkap presi Delme kapasitesi ----- 45 mm Nokta frezeleme kapasitesi ----- 80 mm Parmak matkapları ----- 32 mm Çalışma masası boyutları ----- 800 x 240 mm T yuvası boyutları ----- 14 mm İş mili montajı ----- ISO30 Maksimum iş mili - tabla mesafesi ----- 460 mm İş mili stroku ----- 120 mm Baş eğimi ----- Sol / Sağ 90 Derece Çalışma masasının boylamasına yer değiştirmesi ----- 560 mm Çalışma tezgahının çapraz hareketi ----- 230 mm Hız aralığı 75 - 3200 rpm Ağırlık ----- 350 KG Motor ----- 1,1 KW Gerilim ----- 400V-3F DAHİL * Pimli matkap kafası ISO30 - B16 * Sol / Sağ anahtarı * İş mili koruması * İnce ayar * 2 Hızlı motor Gisdpfx Afjga T Aneijp * Sürülen kama * Dokunma fonksiyonu * Dijital derinlik durdurucu * CE fişi SEÇENEKLER * Destek kutusu * Yönlendirici kelepçe * Yönlendirici tutucu ISO30 + 12 pens kutu içinde * Yönlendirici seti

Durumu: yeni gibi (sergi parçası), Üretim yılı: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Specifications: Centre distance: 1,100 mm Centre height: 180 mm / (250 mm optional) Workpiece weight: 100 kg (between centres), 300 kg (supported between centres) Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, infinitely variable speed 30-450 rpm, swivelling range 0 - 90° Tailstock: MT4, quill stroke 45 mm Quill force: 200-600 N manual (up to 2,500 N adjustable, optional) Table swivel: 10 degrees Cross slide travel: 80 mm Rapid traverse distance: 50 mm Coarse adjustment with air cushion: 280 mm External grinding spindle motor: 4 kW / (5.5 kW optional) Infinitely variable grinding wheel speed adjustment via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Gijdpfoiv Au Ejx Afiop Hydraulic tank: 80 litres Machine weight: net 3,800 kg Infeed drive via DC motor Air cushion assisted rapid adjustment of the grinding spindle headstock for fast and safe positioning to the grinding location. Separate drives for external and internal grinding spindles. Fully automatic operation, infeed movement controlled by rotary selector switch: rapid approach, rapid retraction, grinding cycle, infeed stop, micron infeed. Automatic longitudinal grinding cycle. Central coolant supply for all grinding positions. Workpiece spindle headstock with infinitely variable drive for both rotating and lockable spindle. New digital infeed control with Siemens panel and Siemens PLC for longitudinal and plunge grinding, input for retraction, infeed amounts, feeds, spark-out times, idle strokes, compatible with old Karstens infeed control, with colour Siemens touch panel, scales in X and Z axis by HEIDENHAIN. Comparable to Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller / Fortuna