Vakumlu pişirme ve karıştırma kazanı

LKM Norderstedt Vacuüm Kook-Roertank

Durum: ikinci el, Üretim yılı: 2001, Filling and sealing machine for filling yoghurt and curd into plastic buckets of various sizes. Plastic buckets are automatically placed onto the conveyor belt from the bucket stack in the bucket magazine. Before filling, the buckets, and before sealing, the lids are sterilised using a heating cartridge with hydrogen peroxide and steam. The product is dispensed into the buckets using a calibratable load cell until a preset weight is reached. The sealing unit picks up lids from the lid magazine, places them onto the buckets, and presses them down firmly. Machine (additional feature): gravimetric dosing Output approx.: 450 units/hour based on 6.1-litre buckets; actual output depends on container size and product viscosity Power: 11 kW Voltage: 400 V Frequency: 50 Hz Heat/cooling: steam 3 bar; 10 kg/h Compressed air: 6–8 bar; Qmax = 300 l/min Hsdpfxsyvtrls Ambew Length: 3,708 mm Width: 968 mm Height: 2,442 mm Formats: 1.3-litre buckets (H = 132 mm, Dmax = 132 mm); 6.1-litre buckets (H = 195 mm, Dmax = 226 mm); 10-litre buckets possible Working direction: left → right Base design: inline linear conveyor Equipment features: filling head; sealing head; bucket magazine; lid magazine; heating cartridge; load cell; safety enclosure with doors; control cabinet with pushbuttons and 12-inch touchscreen; product inlet/CIP supply DN50; steam connection 1"; compressed air connection 3/8"; CIP return DN40

Durum: ikinci el, Used Drais (Germany) Dissolver, model RN 3-45 AS VAC. All product-contact parts are made of magnetic stainless steel (ferritic steel). The machine is designed for vacuum operation. The mixer has a single shaft with a working length of 105 cm, equipped with a toothed disc of 690 mm diameter. The shaft is driven by an electric motor with 45 kW power, 1460 rpm, 400/690 V, 50 Hz. Working shaft speed up to approx. 600 rpm. The mixer is equipped with a side wall scraper, driven by a gearbox with a 1.5 kW electric motor, 1410 rpm, 440 V, 50 Hz. Scraper working speed up to 26 rpm. The machine features an upper cover and a vessel with a total capacity of 2000 l. Vessel internal dimensions: diameter 1465 mm x straight side wall length 1160 mm. The vessel has two bottom discharge outlets, each located at the side wall, equipped with valves, and is mounted on two lower guide rails for forklift handling. The dissolver is raised/lowered hydraulically. Lifting height approx. 145 cm. Hydraulic unit driven by a 1.5 kW electric motor, 1420 rpm, 230/400 V, 50 Hz. Equipped with a Tepro (Poland) vacuum pump and control panel. Most recently used in the chemical industry. Hjdpfsykn U Nox Ambew

Durum: ikinci el, System for filling yogurt and quark into round plastic buckets of various sizes and for labeling these with self-adhesive wrap-around labels. The system consists of a separate filling/sealing block and a labeling unit. Hjdpfxey Nnb Uo Ambow Filler/Sealer: Plastic buckets are taken from the stack in the bucket magazine and placed onto the conveyor belt. Prior to filling, the buckets, and prior to sealing, the lids are sterilized using a heating element with hydrogen peroxide and steam. The product is filled into the buckets by a calibratable weighing cell until a predefined weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them on securely. Labeling Unit: In-line labeling machine for self-adhesive wrap-around labels. Suitable for various bucket sizes from 1 - 5 kg capacity. Additional machine information: Gravimetric filling; labeling with self-adhesive wrap-around labels. Filler/sealer output approx.: 450 units/h based on 6-litre buckets, depending on container size and product viscosity. Labeler output approx.: 1,080 units/h. Formats: round plastic buckets from 1 litre to 10 litres. Equipment: Bucket filling and sealing machine; bucket labeling machine.