Alçak şasi dorse

EBERT TLS 55 ATV / Tele / 39,5to Nutzlast

Technical Data for EBERT TLS 43 ATV Special Low Loader:

* Permissible kingpin load: 19,000 kg
* Permissible axle load: 36,000 kg
* Gross vehicle weight: 55,000 kg
* Unladen weight (DIN): approx. 15,500 kg
* Low bed length (internal): approx. 6,650 mm + 4,000 mm
* Axle table length: 3,550 mm
* External width: 2,550 mm
* Loading edge/low bed: approx. 200 mm – 350 mm
* Sliding table length: 500 mm
* Low bed widening to: 3,050 mm
* Low bed telescopic by: 4,000 mm
* B-dimension: 13,300 mm
* Complete vehicle flame-sprayed with zinc, epoxy primer and 2K paint finish
* Oversize markings front and rear with red/white signs
Tyres: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F

Steering: TRIDEC DLS with Tritronic

Axles: 12,000 kg – DLS independent wheel suspension, hydraulically steered and suspended

Front high bed:
* Side walls 600 mm high
* Corners at the front high bed angled
* Doors in each corner, accessible from outside
* Lockable storage box with lid behind the bulkhead, height 600 mm, width 2,480 mm, depth 7,500 mm
* Spare wheel on the front high bed, behind the partition wall on the right
* Staircase on the right side for access from low bed to front high bed
* Hydraulic coupling for decoupling on the left side (6-way Multi-Faster coupling)
* 6 lashing points, 3,000 kg capacity each, on the outer side of the high bed (recessed lashing rings)
* 2 lashing points, 5,000 kg capacity each, on top of the longitudinal beams (to the rear)

Low bed:
* Climbing aids at the boom – extendable
Ibsdsh Tvm Ispfx Ad Rec
* Outer frame thickness: 8 mm
* Low bed telescopic by 4,000 mm, can be locked every 500 mm
* With sliding table, lockable every 250 mm
* 28 lashing points, 10,000 kg capacity each, on the outside of the outer frame
* 24 plug-in pipes 90 x 90 mm, evenly distributed, for widening the low bed to 3,050 mm
* 50 mm hardwood planks placed between the extension tubes with 10 mm overhang

Rear high bed:
* High bed sloped forward and perforated, prepared for retrofitting with ramp holder profiles, zinc-plated adapters
* At the rear, ramp holder profiles (Altec) – C-rails
* 8 lashing points, 10,000 kg capacity each, on the outside of the high bed
* 6 lashing points, 5,000 kg capacity each, in the excavator well
* 10 lashing points, 5,000 kg capacity each, at oversize on the outer frame
* Excavator well lockable at the front and rear with removable wooden floorboard

Electrical:
* Use NATO spiral cable, power supplied by the towing vehicle
* Rotating beacon centrally at the rear
* Side marker lights in LED
* Standard tail lights, vertically mounted (LC5)
* Work lights on the high bed for illuminating the low bed
* Oversize marking front and rear for controlling decoupling, sensor for securing and pressure switch for suspension

Air:
* 80 l aluminium air reservoir
* TEBS modulator
* Extension lock left and right (valve on the side at the rear of the high bed)
* Double release valve

Hydraulics: Hydraulic system on the high bed for steering, suspension, and detachable gooseneck

Accessories:
* 2x sets of 4 hardwood planks for low bed widening and sliding table
* 2 wheel chocks for decoupling
* 4 wheel wedges

On request, we can submit a leasing or financing offer. Mr. Ebert (tel. ...) will be happy to assist you. For further information, please visit our website. Subject to errors and prior sale.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.