Silo yarı römork

OMEPS

O.ME.P.S Tipping Silo Semi-Trailer——Type: CR 47

Chassis:
Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400 mm, 2" king pin, tipping cylinder: Hyva

Axles and Suspension:
Disc brakes 22.5", SAF axles 3x 9t with air suspension, axle spacing is 2 x 1,310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor equipment, 3rd axle liftable with Wabco Optiturn

Wheels and Tires:
6 wheels fitted with 385/65 R22.5 tires, manufacturer-approved Alcoa Dura-Bright aluminum rims size 11.75x22.5 ET 120

Brake System:
EBS 4S/2M WABCO air pressure brake system with RSS, according to standard 98/12/EC - ECE R13/09, brake pad wear indicator connected

Lhsdpsx Nufmsfx Af Hsr
Landing Gears:
Mechanical landing gears with two speeds, 2x 20t load capacity with swing feet at the rear, without rear support

Electrical System:
All lights in LED version, 24 Volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis frame, yellow side marker lamps in the prescribed quantity, rear position lights, front marker lights, rear license plate lights, lighting in compliance with standard 97/28/EC-2007/35/EC, two multi-chamber lights at the rear installed on aluminum brackets at the turntable level according to standard 97/28/EC-2007/35/EC, one LED work light on the tank, yellow warning light at the rear mounted at hose pipe height, 2x reversing lights in the underride guard, 2x reversing lights at the height of the supports (each switchable on the energy console)

Tank Design:
A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank with a volume of 47,000 liters, tank warranty: 24 months from delivery
Operating Parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/EC. Wall thickness approx. 5 mm, test overpressure 3.0 bar – operating overpressure 2.0 bar, operating temperature -40° to +80°C

Filling Options:
4 manholes DN 450 with swing and hinged dome lids. The dome lids are sealed pressure-tight with 4 wing nuts each, rubber support for dome lid storage on top, rain strip closed in front and open at the back

Material Discharge:
1 material discharge cone DN 800 in stainless steel, foldable with stainless steel disc for loosening, discharge cone laterally swiveling, shut-off flap DN 150 with white seal, connection: STORZ-A

Air Piping:
A 2.5" stainless steel air manifold line mounted on the control side RIGHT, a 4" stainless steel air distributor pipe mounted at the rear of the tank, air valves (shut-off flaps) in stainless steel, top air hose and air connection hoses with 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m before the turntable

Ladder and Walkway:
1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor railing is foldable from below with a separate ladder part and equipped with a locking brake when open, 1 aluminum safety catwalk guided along the top left side of the tank, anti-slip coating on the tank

Discharge Hose Carriers:
4 hose tube containers, 5m length, DN 200, aluminum, with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76

Accessories: The side underrun protection...

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.