200 ton balya presi yatay bağlama ile

MACPRESSE EUROPA S.R.L. 112

Technical Data – Baler:
Manufacturer: MACPRESSE EUROPA S.R.L.
Model: 112
Year of manufacture: 2002, partially overhauled in December 2025
Operating hours: 44,590 hours (as of December 2025)
Main press force: 200 t
Specific press force: 16.5 kg/cm²
Feed hopper dimensions: 2,000 x 1,020 mm
Feed volume: 2.65 m³
Theoretical throughput: 795 m³/hour
Bale dimensions: 1,100 x 1,100 mm, length variable
Drive power: 2 x 75 kW
Tying: 5-fold horizontal, fully automatic
Throughput for MSW: approx. 48 to 54 t/hour, depending on material
Hydraulic oil tank capacity: 3,100 L
Machine weight (baler): approx. 50.8 t

Scope of supply:
1 unit MACPRESSE baler, type 111A
1 unit operating manual with CE declaration, electrical and hydraulic circuit diagrams

Remarks:
The machine has been serviced and partially overhauled in our workshop. The following work has been carried out and parts replaced:

• Hydraulic oil tank drained and cleaned
• Oil and air filters replaced
• New hydraulic oil filled
• All hydraulic hoses replaced
• Dismantling of press ram, disassembling into individual parts, overhauling mechanism
• Replacement of the front two main running rollers
• Replacement of knives on the press ram
• Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete set of seals replaced
• Counter knife in frame replaced
Cedpfx Ahsx Dnb Uo Isaa
• Knife gap set to approx. 3 mm
• Upper steel guide rails in left and right frame replaced
• Removal of worn baler floor, replacement of base plate with wear-resistant HARDOX steel
• Dismantling of tying and twisting unit, disassembling into individual parts, overhauling mechanism, replacement of all twister shafts and ball bearings
• Replacement of all wire rollers in needle heads
• Wire knives cleaned and readjusted, chains lubricated and tensioned
• All wire return rollers overhauled
• All door contact switches replaced
• Vibulator dismantled, disassembled and overhauled
• General maintenance performed

Finally, the baler was function-tested in both manual and automatic modes; see video for function test of the machine.

All documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Viewing is possible by appointment. We assume no liability for the details provided or any possible errors.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.