Kullanılmış Morgana Rdc Die Cutter 3852 satın al (8.378)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Uygunluk
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Makine üreticisi
- Üretici Z'den A'ya
- Makine üreticisi
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Uygunluk
- Uygunluk
Küçük ilan
Ursberg
2.237 km
Açılı konveyör bant, dikey elevatör, sanayi
die magnetprofisWF1200-1800-150
Ara
Üretim yılı: 2025, Durumu: yeni gibi (sergi parçası), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 20251122351, Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granulate, etc.
Aluminum angle conveyor including mobile underframe
Horizontal section: 1,200 mm
Inclined section: 1,800 mm
Angle of bend: 40 degrees each
Infeed height (from ground): 500 mm
Discharge height: 1,600 mm
Conveyor belt width: 700 mm
Extremely robust aluminum construction, heavy-duty design!
PU conveyor belt with cleats and corrugated sidewalls
Drive: 0.55 kW motor (adjustable), speed approx. 0.77 m/sec
Connection: 220/240V, 50Hz, IP54 protection class
Drive, etc., ready for connection, motor control optional
Corrugated sidewalls: 80 x 50 mm
T-60 cleats, short pitch
2-ply, particularly cross-stable
Corrugated sidewalls, cleats, and belt seamlessly high-frequency welded
In the bend area, the belt is guided on both sides by 4 hold-down rollers each.
The belt features a 100 mm edge-free zone on both sides.
Due to the corrugated sidewalls on both sides, the usable width of the conveyor belt is reduced:
Usable width: 400 mm, as follows:
(Top view) Lateral arrangement: 100+50+400+50+100 mm
Demonstration unit
- Immediately available!
Lodpfxsyt Ia Do Ak Sjaa
- Can be inspected under power
All prices are net prices plus 19% VAT.
All information is given without guarantee, subject to prior sale!
Küçük ilan
Ursberg
2.237 km
Yükselen bant konveyör, bantlı konveyör sistemi
die magnetprofis
Ara
Üretim yılı: 2025, çalışma saatleri: 5 h, Durumu: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 2025112701, Aluminium inclined conveyor belt with substructure
including adjustable feet and machine feet for leveling uneven surfaces
- Feed height: 500 mm
- Inclined section: 3,000 mm
- Discharge height: 2,000 mm
Design:
Aluminum structural construction
- Reinforced triple profile 135x45 mm
- Full-surface discharge sheet, 2.0 mm galvanized
Drive roller + return roller made of S235 steel, welded and machined
Ø150x620 mm crowned turned, shaft fixed with pillow block bearings.
Drive: Shaft-mounted geared motor, 1.10 kW, belt speed 0.77 m/sec
Connection 230/400V, 50Hz, protection rating IP54
Drive pre-wired up to motor terminal box
(Commissioning must be carried out by a qualified electrician)
PVC conveyor belt DM 10/2 0+005 PVC green
Belt width: 600 mm
Endless, high-frequency welded with stepped splice
Ledpeydb Rwefx Ak Soaa
Belt material: 2-ply, specially cross-stable
2 pcs. wave edge profiles, 80 mm high, 50 mm wide, high-frequency welded flush with the edge
18 pcs. T60 cleats, 430 mm long, pitch approx. 508 mm, welded centrally
Belt material: 2-ply, specially cross-stable
Due to the wave profiles on both sides, the usable width of the conveyor belt is reduced:
Usable width 500 mm, calculated as follows:
(top view) transverse arrangement 50+500+50 mm
Küçük ilan
Volkach
2.313 km
Duplo DocuCutter DC-645 | 2011
DuploDocuCutter DC-645
Ara
Durumu: kullanılmış, Üretim yılı: 2008, Teklif şunlardan oluşmaktadır:
- Yüksek performanslı finişer DocuCutter DC-645
Duplo DocuCutter DC-645
Dijital renkli baskılar için yüksek performanslı finişer:
- Besleyici:
Vakum/üfleme hava besleyici, hizalama hattı ile
- Kullanım: LCD ekran üzerinden
- Kontrol: Barkod kontrolü
- PC dahil
- Sipariş hafızası: Tekrarlayan işler için 80 hafıza alanı
- Hata önleme:
Ultrasonik çift yaprak kontrolü
Ayırma bölmesi
Test çalıştırma programı
Baskı işareti okuma
- Entegre bıçaklar:
6 uzunlamasına bıçak + 1 enine bıçak
- Format:
max. 650x370mm
min. 210x210mm
- Kağıt ağırlığı:
110-350g/m²
- Yükleme kapasitesi: 100mm
Lajdpsx Afarofx Ak Soa
- Sayfa başına çizgi: maks. 10
- Hız:
maks. 1500 sayfa/saat (A4)
maks. 720 sayfa/saat (A3)
- Elektrik: 230V / 50Hz – 0,3kW
- Boyutlar: 2.240x750x1.115mm
- Ağırlık: 360kg
Talep üzerine aşağıdaki hizmetleri sizin için organize edebiliriz:
Paketleme, yükleme, nakliye (deniz veya hava yolu ile) dahil gümrük işlemleri
Leasing teklifi alınması
Küçük ilan
Radom
1.765 km
Kanal açma ve delme makinesi
DuploDocucutter DC-645
Ara
Durumu: iyi (kullanılmış), Duplo Docucutter DC-645 Katlayıcı, kesici
Makine tamamen çalışır durumdadır ve üretime hazırdır.
Açıklama:
DC-645, kartvizitler, davetiyeler, kartpostallar, broşürler, kapaklar, klasörler gibi siparişlerin hızlı bir şekilde yürütülmesi için artan ihtiyaçlar için tasarlanmıştır. Docucutter DC-645, tek geçişte uzunlamasına ve çaprazlamasına keser, kırıştırır, perfore eder, minimum operatör girdisi ile üretimin sürekliliğini sağlar. Tüm makine ayarları otomatik olarak ayarlanabilir - kesme bıçaklarının ayarlarından, katlama kirişlerinden katlama derinliğinin ayarına kadar. İşi keserken, uygun kontrol sayesinde doğrudan cihazın muhafazasının alt kısmında bulunan sepete giden kırpıntılar oluşur.
DC-645 cihazı ile aşağıdaki gibi işleri gerçekleştireceğiz:
Lodpjwzamgefx Ak Seaa
Kartpostallar
Kesilmiş ve buruşturulmuş kartvizitler
Flyers
Broşürler
Kitap kapakları
CD/DVD kapakları
Menü
Posta malzemeleri
Kırpıntıların otomatik olarak sepete boşaltılması
Katlama derinliğinin otomatik olarak ayarlanması
kağıt boyutu: 370×650 mm
Min. kağıt boyutu: 210×210 mm
Minimum çıktı formatı: 48×85 mm
Kağıt ağırlığı: 110-350 g/m2
Makine ağırlığı: 360kg
Küçük ilan
Radom
1.765 km
çift taraflı köşe kesici
Double side corner cutterpneumatic
Ara
Durumu: iyi (kullanılmış), Çift taraflı köşe kesici
Çok iyi durumda. Köşe yuvarlama için profesyonel bir üretim cihazıdır.
Sağlam yapısı ile hassas çalışma garanti edilir.
İki kesim kafası.
Değiştirilebilir bıçaklar.
Ayarlanabilir marjinler.
Ayak pedal kontrollü.
Bir takım 8 mm bıçak dahil
Lajdpfx Akswungze Soa
Yığın yüksekliği yaklaşık 80 mm
Ağırlık 100 kg
Verimlilik 20 çevrim/dakika
Basınçlı hava bağlantısı.
Küçük ilan
Volkach
2.313 km
Duplo DocuCutter DC-645 | 2011
DuploDocuCutter DC-645
Ara
Durumu: kullanılmış, Üretim yılı: 2011, DOĞRUDAN MATBAADAN
Bu makineyi müşterimiz adına satıyoruz ve istediği fiyatı gerçekleştirmeye çalışıyoruz.
Ancak, sizden gelecek tekliflere de açığız.
Teklif şunlardan oluşur:
- DocuCutter DC-645 yüksek performanslı sonlandırıcı
Duplo DocuCutter DC-645
Dijital renkli baskılar için yüksek performanslı sonlandırıcı:
- Besleyici:
Hizalama bölümlü emme/üfleme hava besleyici
- Çalıştırma: LCD ekran üzerinden
- Kontrol: barkod kontrolü
- PC dahil
Ljdpfx Aksu Sr Szo Seaa
- İş belleği: Tekrarlanan işler için 80 bellek konumu
- Hata önleme:
Ultrasonik çift yaprak kontrolü
Kontrol bölmesi
Test çalıştırma programı
Baskı işareti okuma
- Entegre bıçaklar:
6 uzunlamasına bıçak + 1 çapraz bıçak
- Biçim:
maks. 650x370mm
min. 210x210mm
- Kağıt ağırlığı:
110-350g/metrekare
- Yükleme kapasitesi: 100mm
- Yaprak başına kırışıklıklar: maks. 10
- Hız: maks:
maks. 1500 sayfa/saat (A4)
maks. 720 sayfa/saat (A3)
- Güç: 230V / 50Hz - 0,3kW
- Boyutlar: 2,240x750x1,115mm
- Ağırlık: 360kg
Talep üzerine aşağıdaki öğeleri sizin için organize edebiliriz:
Paketleme, yükleme, gümrükleme dahil nakliye (gemi veya uçakla)
Kiralama teklifi alma
Küçük ilan
Sunderland
3.245 km
Katlama ve delme makinesi
MorganaAutocreaser Pro 50
Ara
Durumu: mükemmel (kullanılmış), Übersicht
Die Morgana AutoCreaser Pro 50 ist eine leistungsstarke, vollautomatische Rill- und Perforiermaschine für SRA3- und B3-Bögen. Als weiterentwickeltes Nachfolgemodell verfügt sie über die fortschrittliche Pro SmartScreen Touchscreen-Bedienoberfläche, die eine schnelle und intuitive Einrichtung ermöglicht. Die Pro 50 verarbeitet Papiergewichte von 80–400 g/m² und liefert präzise, professionelle Ergebnisse bei hohen Produktionsgeschwindigkeiten – bis zu 8.500 A4-Bögen oder 11.000 A5-Bögen pro Stunde.
Diese 500mm-Maschine unterstützt sowohl vertikales als auch horizontales Rillen und ist ideal für Akzidenzdruckereien, Digitaldruckbetriebe und Inhouse-Finishing. Die intuitive Bedienung ermöglicht es dem Anwender, Falzarten auszuwählen, Bogenformate einzugeben und Anpassungen sofort vorzunehmen, wodurch Rüstzeiten reduziert und die Produktivität erhöht werden.
Hauptmerkmale
- 7" Pro SmartScreen Touchscreen – einfache, intuitive Job-Einrichtung und Steuerung
- Vollautomatischer Betrieb – Einzug, Rillen und Perforieren mit minimalem Bedienaufwand
- Produktivität mit hoher Geschwindigkeit – 8.500 A4-Bögen/Stunde, 11.000 A5-Bögen/Stunde
Lasdpfxjyz A Ndo Ak Soa
- Vielseitiges Rillen – bis zu 16 Rillungen pro Bogen, vertikal und horizontal
- Breite Materialbandbreite – 80–400 g/m², bis zu 0,4 mm Stärke
- Hohe Bogenkapazität – bis zu 700 x 500 mm
- Unbegrenzter Auftrags-Speicher – Speichern und Abrufen mehrerer Jobs mit alphanumerischer Benennung
- Standard-Perforation – verschiedene Perforierrad-Optionen für individuelle Veredelungen
Warum Morgana AutoCreaser Pro 50?
- Schnelles und präzises Finishing von Broschüren, Buchumschlägen, Grußkarten, Speisekarten und Mailings
- Reduzierte Einarbeitungszeit dank Touchscreen-Steuerung und automatischer Einrichtung
- Bewältigt hohe Auflagen ohne Präzisionsverlust
- Vielseitig und zuverlässig – für Digital- und Akzidenzdruck geeignet
Technische Daten
Hersteller: Morgana
Modell: AutoCreaser Pro 50
Min. Bogenformat: 210 x 140 mm
Max. Bogenformat: 700 x 500 mm
Min. Papiergewicht: 0,11 mm (ca. 80 g/m²)
Max. Papiergewicht: 0,4 mm (ca. 400 g/m²)
Max. Anzahl Rillungen: 16 pro Bogen
Min. Rillabstand: 1 mm
Netzanschluss: 240 V, 50/60 Hz
Gewicht: 210 kg
Abmessungen: (L) 2129 mm x (B) 660 mm x (H) 1235 mm
Küçük ilan
Erwitte
2.512 km
Küçük Boru Metal Lazer Kesim Makinesi
High-speed Cutter for Small TubesG16 3kW - 6kW
Ara
Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, güç: 3 kW (4,08 bg), Üretim yılı: 2025, Donanım: klima, soğutma ünitesi, G16
Ledpfx Aowz Ufwjk Sjaa
Tip: İki aynalı
Küçük ilan
Erwitte
2.512 km
Tüp lazer kesim makinesi
Heavy-duty Tube Laser Cutter 6kw-20kwNS-12052HG bevel≤45°
Ara
Durumu: yeni, Üretim yılı: 2025, Boru çapı (maks.): 12.000 mm, X ekseni hareket mesafesi: 12.000 mm, Donanım: emniyet ışık bariyeri, soğutma ünitesi, Üç-mandrenli Ağır Hizmet Tipi Fiber Lazer Boru Kesme Makinesi
Lsdpfev D Uhfjx Ak Soaa
NS-12052HG
12000mm, 500 Chuck
Yardımcı besleme için servo tahrik kullanılır
Yüksek kaliteli mandren
Farklı boru boyutlarına uyarlanabilir
Servo kontrol, mükemmel performans
Ekipmana ultra yüksek dinamik performans kazandırır
Yardımcı besleme sistemi
Çalışma yoğunluğunu azaltır ve verimliliği artırır
Daha fazla işlenmiş boru türü
Uçan kesimi destekler
Yüksek hassasiyetli Z ekseni kontrolü
Eğimli kesme
Yüksek otomasyonlu
≤2m iş parçaları servo kanatlar aracılığıyla boşaltılır
Küçük ilan
Erwitte
2.512 km
Lazer kesme makinesi
Eco-friendly laser Cutter 3015H12KW
Ara
Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2025, Donanım: CE işareti, acil durdurma, dokümantasyon / kılavuz, duman emişi, emniyet ışık bariyeri, merkezi yağlama sistemi, soğutma ünitesi, toz emişi, uç değiştirici, 3015H Hochgeschwindigkeits-Laser-Blechbearbeitungsmaschine
Hochgeschwindigkeit ermöglicht effiziente Bearbeitung
1,5G Beschleunigung
50 %–100 % Steigerung der Effizienz bei der Bearbeitung von Dünnblechen
7 Hz Tiefpassfilterung
Ermöglicht hochpräzises und schnelles Schneiden komplexer Konturen
Über 50 % Effizienzsteigerung bei filigranen Bearbeitungen
Hohe Geschwindigkeit und Effizienz für maximale Produktivität
Unsere Hochgeschwindigkeits-Schneidmaschine verfügt über einen Doppelstationen-Hochgeschwindigkeits-Wechseltisch
Ermöglicht einen parallelen Schnellwechsel in nur 15 Sekunden
Be- und Entladen laufen gleichzeitig mit dem Schneidprozess – ohne gegenseitige Beeinträchtigung und mit deutlich gesteigerter Bearbeitungseffizienz
Verdoppelt den Ausstoß pro Zeiteinheit
Durchdachte, umweltfreundliche Konstruktion
Mit segmentierter Absaugung ausgestattet
Verfügt über 8–30 vollautomatische Hochleistungs-Unterdruck-Absaugsysteme
Sorgt für einen reibungslosen Rauchabzug und eine hervorragende Staubabscheidung
Höchste Sicherheitsstandards für Ihre Produktion
Serienmäßig mit einem einzigartigen, intelligenten Anti-Kollisions-System zur Personenerkennung ausgestattet
Türverriegelungsschutz und Motordrehmomentüberwachung inklusive
Laedpfswvpcmex Ak Sja
Garantiert sicheres Arbeiten
Entwickelt, um den Arbeitsaufwand bei der Blechbearbeitung zu reduzieren
Mit vollautomatischem Schmiersystem ausgestattet
Insgesamt 16 automatische Schmierstellen über die XYZ-Achsen verteilt
Erhöht die Lebensdauer der Komponenten um 300 %
Bietet höhere Präzision im Betrieb bei gleichzeitig geringeren Wartungskosten
Küçük ilan
Ursberg
2.237 km
Konveyör bant, düz konveyör bant, yükseltici konveyör
die magnetprofisSteigförderband Flachförderband Förderer
Ara
Durumu: yeni, Üretim yılı: 2026, Aluminum Inclined Conveyor with Underframe (PU/PVC with Cleats & Corrugated Sidewalls)
We offer a robust inclined conveyor built with aluminum profiles for the reliable transport of both unit and bulk goods – ideal for industry, manufacturing, recycling, woodworking, and many other sectors.
Thanks to cleats and corrugated sidewalls, safe material conveyance is ensured even at steep inclines.
_____
Technical Data (Sample Configuration):
✔ Feed height: custom adjustable
✔ Inclined section: lengths freely selectable
✔ Discharge height: custom adjustable
✔ Underframe including leveling feet & machine mounts or transport rollers
→ allows leveling on uneven floors / ensures stable installation
_____
Design / Frame:
✔ Aluminum profile construction
✔ Double profile 90x45mm or reinforced triple profile 135×45mm
✔ Full-surface cover plate 2.0 mm galvanized or 1.4301 stainless steel (VA)
_____
Rollers / Drive:
✔ Drive roller + return roller made from S235 steel, welded and machined
✔ Diameter: 100, 150, or 220 mm
✔ Shafts secured with bearing housings
✔ Drive: shaft-mounted gear motor 0.18 – 3.0 kW
✔ Belt speed: individually adjustable
✔ Connection 230/400V, 50Hz, protection class IP54 (standard)
✔ Drive prewired to motor terminal box
➡️ Commissioning by a qualified electrician required
_____
Conveyor Belt / Carriers:
✔ PVC conveyor belt DM 10/2 0+005 PVC green
✔ Belt widths: 100, 200, 300, 400, 500, 600, 700, 800, 900 or even 1,000 mm
✔ Endless high-frequency welded (stepped joint)
✔ 2-ply, 3-ply with high transverse rigidity
✔ Corrugated sidewalls: up to 80 mm high
✔ Cleats: custom adjustable
✔ Cleat pitch: custom adjustable
_____
Optional Features / Accessories:
Laodjyhzpljpfx Ak Ssa
✔ Infeed chutes
✔ Hoppers / Feed hoppers
✔ Storage hoppers
✔ Discharge hoppers
✔ Custom lengths / widths
✔ Cleats & sidewalls to customer specification
_____
✔ Custom fabrication to customer requirements
✔ Industrial-grade quality “Made in Germany”
Dimensions, versions & pricing upon request. Just send us a message – we provide fast & straightforward advice.
Discover tailor-made solutions for your industry!
As an innovative mechanical engineering company, we are proud to offer individual solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems to flat belt conveyors, inclined conveyors, angle conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, crossbelt magnetic separators, drum magnetic separators, and dosing hoppers – all tailored to each customer’s specific requirements.
We understand that every industry and project is unique. That’s why we customize our solutions to your exact requirements and specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions in close cooperation with you. For us, every project is unique – for every problem, we find the right solution!
Challenge us! Contact us and see how we can turn your requirements into customized solutions. Together, we will shape the future of your production processes!
Küçük ilan
Ursberg
2.237 km
Konveyör bant Taşıma bandı Bantlı konveyör
die magnetprofisBandförderer Gurtförderer Chevron
Ara
Üretim yılı: 2026, Durumu: yeni, Robust steel construction – designed for continuous operation
The base structure is made of a sturdy structural steel frame, manufactured from laser-cut, bent, and welded components.
The surface features a high-quality powder coating in RAL0208.
Modular design:
Our conveyor belt frames are available as transportable sections.
This design allows the system to be:
- Easy to transport and assemble
- Extendable or shortenable at any time
- Ideally suited for future modifications or plant adjustments
Conveying technology & carrier rollers
The carrier roller assemblies in the lower run are engineered for smooth and reliable operation:
- Shaft diameter: 60/15 mm
- Roller station spacing: approx. 500 mm (customizable)
- Closer roller spacing in the loading area upon request for increased load capacity
Drive & rollers
The drive drum and tail drum are made of S235 steel, welded and precision-machined:
Ledpfxsyhznne Ak Ssaa
- Ø 220 × 700 mm, crowned surface
- Shaft secured with bearing housings
- Bearing points equipped with robust UCF flange bearings including grease fittings
Drive unit:
- Hydromec worm gear motor 1.1 kW
- Belt speed: approx. 1.15 m/s
- Connection: 400V / 50 Hz, protection class IP54
- Drive prewired up to the motor terminal box (commissioning must be carried out by a qualified electrician)
- Motor mounted on the right in direction of conveyance, pulling configuration
Conveyor belt
A durable, industrial-grade belt is used:
- DM EP250/2, 3+1.5 mm cover
- Chevron profile, 17 mm high, 650 mm wide
- Joint area without profile
- Endless hot vulcanized
Custom options & accessories (as required)
Thanks to the modular structure, all components can be precisely tailored to your process, e.g.:
✅ Special lengths & widths
✅ Side plates / wave edges (for lateral guidance and enhanced conveying stability)
✅ Infeed plates/loading plates (wear-resistant, gentle on material)
✅ Feed/infeed hoppers (for clean loading of bulk materials)
✅ Discharge plates/chutes
✅ Cleat profiles / alternative belt qualities
✅ Adjustable roller spacing & carrier roller geometry
✅ Special paint finishes / customer-specific designs
Küçük ilan
Ursberg
2.237 km
Tarım için çelik konveyör bant
die magnetprofisStahlförderband Haldenband Förderband
Ara
Üretim yılı: 2026, Durumu: yeni, DM Flat Belt Conveyor Type FB-700 without substructure
Laodpfeyhznhox Ak Sja
for conveying bulk materials
Conveyor length: 6,000 mm
Belt width: 650 mm
Construction made of structural steel, laser-cut, folded, and welded
Base frame powder-coated RAL 5015
Modular conveyor frame design / segments available in transportable lengths. Frame construction can be extended or shortened at any time.
Carrier roller configuration in the return side, axle Ø60/15 mm
Roller station spacing approx. 500 mm (customizable)
Reduced spacing in the loading area
Drive drum + tail drum made of S235 steel, welded and machined
Ø220 x 700 mm, crowned and milled; shaft fixed with pillow block bearings.
Drive: Hydromec worm geared motor, 1.1 kW, belt speed 1.15 m/sec
Connection 400V, 50Hz, protection class IP54
Drive delivered ready for connection up to motor terminal box
(Commissioning must be performed by a qualified electrician)
Motor mounted on the right in direction of conveying, installed in pulling configuration.
Bearing points equipped with robust UCF flange bearings including lubrication nipples.
Rubber conveyor belt DM EP250/2 3+1.5 mm cover
Chevron profile, 17 mm high x 650 mm wide
Splice area without profile, endless hot vulcanized
Küçük ilan
Ursberg
2.237 km
Ağaç parçalayıcı
die magnetprofisAustragsband Zerkleinerer Magnet Hackgut
Ara
Durumu: yeni, Üretim yılı: 2026, Aluminum Angle Conveyor Belt with Substructure
including adjustable leveling feet and machine feet for leveling uneven floors
Horizontal section: 2,500 mm
Inclined section: 6,000 mm
Bend angle: 45°
Height of horizontal section: 350 mm
Total conveyor length (measured on the floor): 6,750 mm
Discharge height at conveyor end: 4,500 mm
Design:
Aluminum structural construction
- Reinforced double profile 90 x 45 mm
- Full-surface discharge sheet, 2.0 mm, galvanized
Drive roller + deflection roller made of S235 steel, welded and machined
Ø 100 x 620 mm, crowned and turned, shaft fixed with plummer block bearings.
Drive: shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec
Connection: 230/400 V, 50 Hz, protection class IP54
Drive pre-wired up to motor terminal box
(Startup must be performed by a qualified electrician)
PU Conveyor Belt DM 10/2 0+005 PU including PU wave edge, petrol matt
Belt width: 600 mm
2 pcs. wave-edged sidewalls, 50 mm high, 25 mm wide, high-frequency welded
Lodpfx Aoyhzhzjk Seaa
42 pcs. T-40 cleats, 400 mm long, approx. 401 mm pitch
Belt material: 2-ply, especially cross-stable
In the bend area, the belt is guided on both sides by 3 hold-down rollers each.
The belt is supplied with a 70 mm non-edged zone on both sides.
Due to the wave-edged sides, the usable belt width is reduced:
Usable width: 300 mm, as follows:
(Top view) transverse arrangement 70+25+5+400+5+25+70 mm
Special Features:
Belt guided via PVC wedge strip on the running surface, profile 10 x 6 mm
- including widened substructure for head load stability
- including cut-out in the discharge sheet
- including sliding joints on drive and deflection rollers
- including non-magnetic zone for overhead magnetic separator
- including holder for DMPM1200 in the inclined section
Discover custom solutions for your industry!
As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and further processing industries. Our extensive product portfolio includes everything from conveyor systems, flat conveyor belts, incline conveyors, and angle conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnets, and dosing bunkers—each customized to our customers' individual requirements.
We understand that every industry and project is unique. That's why we tailor our solutions precisely to your specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For every problem, we find the right solution—no job is too specialized!
Challenge us! Contact us to find out how we can translate your requirements into bespoke solutions. Together, we’ll shape the future of your production processes!
Conveyor belt, conveyor system, discharge conveyors, belt conveyors, magnetic separators, overband magnets, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, grate magnets, metal separator, block magnet, filter systems, dosing bunker, feed hopper, filling systems.
Küçük ilan
Ursberg
2.237 km
Ağaç parçalayıcı
die magnetprofisWinkelförderband Industrie Heavy duty
Ara
Durumu: yeni, Üretim yılı: 2026, Aluminium Angled Conveyor with Substructure
including adjustable leveling feet and machinery feet for compensation of uneven surfaces
Horizontal section: 3,500 mm
Inclined section: 2,100 mm
Incline angle at bend: 45°
Total conveyor length measured on the floor: 5,000 mm
Discharge height: 2,000 mm
Height of horizontal section: 500 mm
Design:
Aluminium modular construction
- Triple-reinforced profile 135x45 mm
- Fully covered discharge sheet, 2.0 mm galvanized
Drive roller + return roller made of S235 steel, welded and machined
Ø150x820 mm crowned-turned, shaft fixed with bearing units.
Drive: Shaft-mounted geared motor 1.1 kW, belt speed 0.77 m/sec
Connection 230/400V, 50Hz, protection class IP54
Drive pre-wired up to motor terminal box
(Commissioning must be carried out by a qualified electrician)
PVC conveyor belt DM 15/4 0+007 PVC, including PVC wave edge, green
Conveyor belt width: 800 mm
2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded
32 pcs. T-50 cleats, approx. 355 mm pitch
Belt material: 2-ply, highly cross-rigid
In the bend area, the belt is guided on each side by 3 hold-down rollers.
The belt is designed with a 70 mm edge-free zone on each side.
Due to the double wave edge, the usable belt width is reduced:
Usable width: 490 mm, calculated as follows:
(Top view) crosswise: 100+50+5+490+5+50+100 mm
Discover tailored solutions for your industry!
Ledpfx Asyhzhuok Soaa
As an innovative mechanical engineering company, we are proud to offer customized solutions for the recycling, food, and further processing industries. Our extensive product portfolio covers everything from conveyor systems, flat conveyors, incline conveyors and angle conveyors to Z-shaped conveyors. Additionally, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements.
We understand that every industry and every project is unique. That’s why we adapt our solutions specifically to your needs and specifications. Complex projects are exciting challenges for us, and we look forward to developing innovative solutions together with you. With us, there are no off-the-shelf products – for every problem, we find the right solution!
Challenge us! Contact us and discover how we can transform your requirements into bespoke solutions. Together, we shape the future of your production processes!
conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems
Küçük ilan
Ursberg
2.237 km
Ağaç parçalayıcı
die magnetprofisWinkelförderband Z-Förderband
Ara
Durumu: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, Aluminum Z-shaped conveyor belt with substructure, including adjustable feet and omnidirectional transport casters with locking brakes.
Horizontal section: 800 mm
Inclined section: 3,000 mm
Second inclined section: 1,200 mm
Angle at each bend: 60°
Total conveyor belt length (measured on the floor): 3,500 mm
Height of the horizontal section: 400 mm
Design:
- Aluminum construction profile, double-reinforced 90x45 mm
- Full-surface discharge plate, 2.0 mm galvanized
- Drive drum and tail drum: S235 steel, welded and machined
Ø100x720 mm, crowned and precision-turned, shaft mounted on pillow block bearings.
- Drive: Mounted gear motor, 1.10 kW, belt speed: 0.53 m/sec
- Electrical connection: 230/400V, 50Hz, protection class IP54
- Drive supply cable pre-installed up to the motor terminal box
(Commissioning must be carried out by a qualified electrician)
PU conveyor belt DM 10/2 0+005 PU with wave edge, petrol matte finish, AS (anti-static), especially laterally rigid with a hard cover
- Conveyor belt width: 700 mm
- 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded
- 34 pcs. T40 cleats, centrally positioned, 430 mm long, spacing approx. 299 mm
- Belt material: 2-ply, extra laterally rigid
- In the bend area, the belt is guided on each side by 3 hold-down rollers
The belt is manufactured with a 70 mm edge-free zone on both sides.
Due to the wave edge on both sides, the usable belt width is reduced:
Usable width: 500 mm, calculated as follows:
(Top view) cross arrangement: 70+25+5+500+5+25+70 mm
Lsdpfeyhzhnsx Ak Soaa
Belt guidance via PVC V-guide on the running surface, profile 10x6 mm
- Including cut-out in the discharge plate
- Including slide bearings in the drive and tail drums.
Küçük ilan
Ursberg
2.237 km
Konveyör bant
die magnetprofisSteigförderband
Ara
Durumu: yeni, Üretim yılı: 2026, Aluminium inclined conveyor belt with supporting frame
including adjustable feet and machine feet for leveling uneven surfaces
- Infeed height: 500 mm
- Inclined section: 2,000 mm
- Discharge height: 1,200 mm
Lajdsyhzhbspfx Ak Soa
Specification:
Aluminum structural design
- Triple reinforced profile 135x45 mm
- Full-surface discharge plate, 2.0 mm galvanized
Drive roller and return roller made from welded and machined S235 steel
Ø150x620 mm, crowned and precision-turned, shaft fixed with bearing units.
Drive: Mounted gear motor 1.10 kW, belt speed 0.77 m/sec
Connection 230/400V, 50Hz, protection class IP54
Drive pre-wired up to the motor terminal box (commissioning must be performed by a qualified electrician)
PVC conveyor belt DM 10/2 0+005 PVC green
Conveyor belt width: 600 mm
Endless high-frequency welded with stepped joint
Belt material: 2-ply, especially cross-stable
2 pcs. corrugated sidewalls, 80 mm high, 50 mm wide, side-flush high-frequency welded
14 pcs. T60 cleats, 400 mm long, pitch approx. 296 mm, center-mounted
Belt material: 2-ply, especially cross-stable
Due to the corrugated sidewalls on both sides, the usable width of the conveyor belt is reduced:
Usable width 500 mm, as follows:
(top view) transverse layout 50+500+50 mm
Küçük ilan
Nieuwkuijk
2.718 km
Kanal açma ve delme makinesi
MorganaAutocreaser
Ara
Durumu: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Çok iyi durumda bir oluk açma makinesi satılıktır.
Marka: Morgana. Model: Autocreaser.
Ledpfx Aksyrp Slo Soaa
Perforasyon seti dahildir.
Maksimum kağıt ebadı 630 x 330 mm, 9 ayrı iş için hafıza kapasitesi.
Voltaj: 230 Volt monofaze.
Makine %100 çalışır durumda ve çok az kullanılmıştır.
Elbette, bu makineyi bizimle birlikte test etmekten memnuniyet duyarız.
Nakliye/paketleme işlemlerini organize edebilir ve araca veya konteynere yükleyebiliriz.
Nakliye dahil fiyat için lütfen bilgi alınız (bulunduğu yer: Hollanda).
Saygılarımla, Henk Hoos.
Küçük ilan
Midsomer Norton
3.218 km
Et işleme makinesi
Alpina Bowl CutterSwopper 330 S
Ara
Durumu: yenilenmiş (kullanılmış), Üretim yılı: 2010, Fonksiyonellik: sınırlı işlevsellik, Alpina Swopper 330 Litre Kıyma ve Karıştırma Makinesi
Üretim yılı: 2010
Motor gücü: 141 kW
Çok kademeli bıçak ve kazan
Ses yalıtım kapağı
Otomatik açılır bıçak kapağı
6 adet bıçak
Lajdoykt Sgopfx Ak Sea
Boşaltma diski
Tote kutusu yükleme kolu
Şu anda revizyonda
Yeni bıçak mili rulmanları takıldı
Hidrolik silindirler kontrol edilip, yeni contalar takılıyor
Ana motor yeniden kablolandı, makine temizlik için tamamen söküldü
6 adet bıçak hızı, 2 adet ters bıçak hızı
4 adet kazan dönüş hızı
Makine kullanım kılavuzu ve teknik çizimleri ile birlikte.
Küçük ilan
Almanya
2.184 km
Manyetik plaka manyetik ayırıcı
die magnetprofisDMPMP260x104x41,5
Ara
Üretim yılı: 2016, Durumu: yeni, makine/araç numarası: DMPMP260x104x41,5, Plaka mıknatıs NdFeB Neodim versiyonu
260 x 104 x 41.5 mm
Tamamen kaynaklı konut
4 delik M8x20mm vurdu
Kenar uzaklığı: 40mm
-BHmax: 263-279 kJ / m³
Br: 1170-1210, JHc: > 955KA / m
Maksimum çalışma sıcaklığı: 80 ° C
Müşteri tarafından kabul edilmedi bir aşırı bu. En fazla 10 adet.
Lajdpfx Aksc Tctkj Ssa
Küçük ilan
Almanya
2.184 km
Konveyör bant + üst bant manyetik ayırıcı
die magnetprofis
Ara
Üretim yılı: 2022, Durumu: yeni, makine/araç numarası: 201811209, Manyetik ayırıcı dahil Manyetik bant ayırıcı Manyetik bant
Odun yongası üreticileri için konveyör bant + konveyör bant manyetik ayırıcı komple çözüm
Alt yapılı alüminyum açılı konveyör bant
ayarlanabilir ayakların yanı sıra tesviye için makine ayakları dahil
yatay aralık: 3.000mm
Yükselme aralığı: 2.000mm
Bükülme alanındaki açı: 45
Laedpfx Aksdrdyyo Sja
Toplam konveyör uzunluğu: 4.400 mm
Boşaltma yüksekliği: 1.600 mm
Yatay yükseklik: 200mm
Konveyör bant genişliği 500mm
Tahrik silindiri + saptırma silindiri S235 çelik kaynaklı ve işlenmiş
Bir dirsek içine monte edilmiş ve taçlandırılmış alüminyum saptırma silindiri
PU-konveyör bandı DM 10/2 0+005 PU oluklu kenar dahil petrol mat
Tahrik: Motor 1,1KW, GEMOTEG Hız 0,3m/sn
Bağlantı 230/400V, 50Hz Koruma sınıfı IP54
Sürücü vb. bağlantı için hazır, motor
2 adet. Mil kenarları 40x35mm
T40 kramponlar, 400 mm aralık
2 katlı özellikle çapraz stabil
Kullanılabilir genişlik 190 mm, sonuçlar aşağıdaki gibidir:
Queranordnung -70+35-190+35-70mm
Güven mührü
Machineseeker tarafından sertifikalandırılmış bayiler

Küçük ilan
Sunderland
3.245 km
Katlama makinesi
MorganaAutoCreaser
Ara
Durumu: mükemmel (kullanılmış), Übersicht
Ab sofort bei Glendale erhältlich: die Morgana AutoCreaser 33, eine generalüberholte und vollständig von unseren geschulten Technikern gewartete Maschine. Sie sorgt für präzise und gleichmäßige Rillungen bei digital und offset bedruckten Materialien und verhindert das Aufbrechen bei stärkeren Grammaturen.
Lasdpfx Aoyrpacsk Sja
Die AutoCreaser 33 kann bis zu neun Rillungen in einem einzigen Durchlauf erzeugen und verarbeitet Papiergewichte von 100 bis 400 g/m² (bis 0,4 mm Stärke) bei Geschwindigkeiten von bis zu 3.850 Bogen pro Stunde. Dank ihres kompakten, mobil einsetzbaren Designs kann eine Bedienperson die Maschine einfach bestücken und die fertigen Bogen entnehmen. Programmierbare Einstellungen und eine Auftrags-Speicherfunktion ermöglichen das schnelle und einfache Wiederholen von Aufträgen.
Hauptmerkmale
- Schnelle und einfache Maschinen-Einrichtung
- Vollautomatischer Rillvorgang
- Bis zu 9 Rillen pro Bogen in einem Durchlauf
- Verarbeitung von Grammaturen bis 0,4 mm (ca. 400 g/m²)
- Geschwindigkeit bis zu 3.850 Bogen pro Stunde
- 0,1-mm-Mikrojustierung für exakte Rillpositionierung
- Speicherfunktion zur Archivierung wiederkehrender Aufträge
- Einstellbare Rilltiefe und Winkelgenauigkeit
- Rillen ohne Aufbrechen von Digitaldrucken
- Kompakte Bauweise mit mobiler Ausführung
Warum die AutoCreaser 33 wählen?
- Generalüberholt und komplett gewartet durch geschulte Techniker für zuverlässige Leistung
- Verhindert Aufbruch bei digital bedruckten und schweren Materialien
- Bis zu 9 Rillen pro Bogen in einem Durchgang – Zeitersparnis
- Automatisierter Betrieb reduziert den manuellen Aufwand und erhöht die Produktivität
- Programmierbarer Speicher für schnelles Abrufen wiederkehrender Aufträge
- Kompaktes, mobiles Design für einfache Bedienung durch eine Person
- Konstant präzise Ergebnisse für professionelle Weiterverarbeitung
Technische Daten
Hersteller: Morgana
Modell: AutoCreaser
Zustand: Gebraucht
Lagernummer: 114989
Maximales Bogenformat: 330 x 630 mm
Minimales Bogenformat: 140 x 210 mm
Minimaler Abstand zwischen zwei Rillungen: 3 mm
Mikrojustierung: 0,1 mm
Papiergewichte: 100 g/m² bis 400 g/m² (0,4 mm)
Geschwindigkeit: bis zu 3.850 Bogen/Stunde
Maschinengewicht: 148 kg
Spannungsversorgung: 230 V, 50/60 Hz
Küçük ilan
Sunderland
3.245 km
Katlama Makinası
MorganaMajor
Ara
Durumu: yenilenmiş (kullanılmış), Şu anda Glendale'de stoklarımızda bu Morgana Major Katlama Makinesi bulunmaktadır. Bu Morgana Major, Morgana tarafından eğitilmiş bir mühendis tarafından yenilenmiş mükemmel çalışma koşullarındadır. Yakın zamanda değiştirilmiş yeni bir motor ve silindirler içerir. Sayfa sayısı sadece 283.000 sayfa ile çok düşüktür. Bu Major katlama makinesi ayrıca delme ve çizme ünitesini içerir.
Morgana Major, kompakt ve kullanımı kolay bir tasarım içinde çok çeşitli 'büyük makine' özellikleri sunmak üzere tasarlanmıştır. Bir boyuttan diğerine veya farklı katlamalar için geçiş saniyeler içinde gerçekleştirilebilir. Morgana Major, standart olarak delme ve çizme ile sayma ve partilemeyi birleştirir.
Morgana Major'ın dijital işlemlerin yanı sıra lito baskıdan gelen çıktıları da işleyebilmesini sağlamak için bir dizi benzersiz özellik geliştirilmiştir. Katlama silindirleri son derece dayanıklıdır ve ayarlama yapmadan çok çeşitli stokları işleyebilir. Kağıt tozundan etkilenmeyen benzersiz kompozit malzemeleri, yüksek parlaklıktaki kağıtları olumlu bir şekilde kavrayacak veya dijital baskı motorlarından çalışacaktır. Dial-a-Fold plaka ayarları, kapakları çıkarmadan tüm ayarlamaların yapılmasını sağlar. 0,1 mm'ye kadar doğrulukta bir LED ekran, katlama plakası konumunu gösterir ve kolay ve doğru tekrar iş ayarlarına olanak tanır.
Güçlü bir emiş beslemesi, çok çeşitli kaplanmış veya kaplanmamış malzemeleri işler ve katlama plakalarına girmeden önce sayfaların yan yatırma hizalamasını içerir. Besleme tablasında ayrıca kıvrılmış veya statik yüklü kağıdı kontrol etmek için bir emiş odası bulunur.
365 mm genişliğinde ve 648 mm uzunluğunda daha büyük bir sayfa boyutu, Morgana Major'ı daha da esnek hale getirir ve 6 sayfa A4 belge üretebilir. Makine hızı saatte 4500 ila 27.500 sayfa arasında tamamen ayarlanabilir ve operatöre çok çeşitli stokların üretimi üzerinde tam kontrol sağlar.
Bu Morgana Major'a takılabilir perforatör/puanlayıcı dahildir ve iş bir yakalama tepsisine teslim edilir.
Temel Ürün Özellikleri
• Güçlü emişli besleyici çok çeşitli kağıt ağırlıklarını idare eder
• Katlamadan önce sayfaların yan yatırılması
• Kıvrılmış kağıdın katlama silindirlerine girmeden önce kontrol edilmesi için düşük basınçlı emiş haznesi
• Anti-statik fırçalar, eğiklik ve mikro ayarlamalarla donatılmış, 'katlama çevirme' ve LED ekranlı tamamen kapalı katlama plakaları
• Takılabilir delme ve çizgi çekme aparatı
• Değişken hız
• Delme veya çizgi çekme sırasında işi yakalamak için tepsi
• Uzun teslimat bandı istifleyici
• Sayma ve partileme
• Çift sayfa, sıkışma önleyici dedektör
Özellikler
Üretici Morgana
Model Major Folder
Durum Yenilenmiş
Stok Numarası 114925
Maksimum sayfa boyutu 674 mm x 365 mm
Minimum sayfa boyutu 148 mm x 140 mm (isteğe bağlı dar sayfa aparatıyla 94 mm)
Maksimum kağıt ağırlığı 240 gsm (doku yönüne bağlı)
Minimum kağıt ağırlığı 56 gsm
Besleyici kapasitesi 500 sayfa 80 gsm
Besleyici Emme Besleme
Hız saatte 4.500 ila 27.000
Delik Açma ve Çizme Aparatı dahil
Güç gereksinimleri 240 v 50/60 hz
Laodpfxov Hr D Nj Ak Sea
Makine ağırlığı 120 kg
Boyutlar (U)1168 mm x (G)493 mm x (Y)990 mm
Küçük ilan
Ursberg
2.237 km
Parçalama tesisi
die magnetprofisMH1030
Ara
Durumu: yeni, Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, rotor çapı: 360 mm, güç: 45 kW (61,18 bg), Malzeme öğütücü 45KW
Hazne açıklığı: 1,030 x 1,235mm
Rotor çapı 360mm
Yıldız-üçgen başlatma, rölanti devrinde otomatik durdurma
- Baskı plakaları ile donatılmış hidrolik itici
- Siemens SPS kontrol sistemi
- Boşaltma konveyörü + bant üstü manyetik ayırıcı için kontrol kabini uzatması ile opsiyonel
Herhangi bir tasarımda boşaltma konveyör bandı ile komple çözüm.
Lodpfx Ast Rivtok Ssaa
Temel yetkinliğimiz, müşteriye tam olarak gerçekten ihtiyaç duyduğu şeyi sağlamakta yatmaktadır.
Özel, bireysel çözümler geliştirmek ve kendi üretimimizden ilgili sistemleri tedarik etmek için müşterilerimizle birlikte çalışıyoruz.
Uygulamanıza uygun bir çözüm bulmak için lütfen bizimle telefonla iletişime geçmekten çekinmeyin.
konveyör bandı, konveyör bant sistemi, boşaltma bantları, bantlı konveyör, manyetik ayırıcı, bant üstü manyetik ayırıcı, geri dönüşüm, talaş, plastik, metalsiz metal algılama, neodimyum, bant üstü mıknatıs, manyetik bant ayırıcı, kaldırma mıknatısları, filtre çubukları, manyetik ızgara, manyetik ızgara, metal ayırıcı, blok mıknatıs, filtre sistemleri
Küçük ilan
Ursberg
2.237 km
Parçalama tesisi parçalayıcı parçalayıcı
die magnetprofisWKZ45-1030
Ara
Durumu: yeni gibi (sergi parçası), Üretim yılı: 2024, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WKZ45-1030, CLEARANCE SALE, STOCK MACHINE!
We cordially invite you to visit our technical center to experience the quality and performance for yourself.
Material shredder 45kW
Hopper opening: 1,030 x 1,235 mm
Rotor diameter: 360 mm
Star-delta start, automatic shut-off in idle mode
- Hydraulic pusher equipped with pressure plates
- Siemens PLC control system
- Optional: electrical cabinet extension for discharge conveyor + overband magnet separator
Complete solution with discharge conveyor in any configuration.
Our core competence is delivering exactly what the customer truly needs.
We work together with our customers to design bespoke, individual solutions and deliver the corresponding systems from our own production.
Laedpfov Tdq Isx Ak Soa
Feel free to contact us by phone to find a suitable solution for your application.
Conveyor belt, conveyor system, discharge conveyors, belt conveyor, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, grate magnet, metal separator, block magnet, filtration systems
All prices are net, plus 19% VAT.
All information provided without guarantee, only while stocks last!
Sizin için aramayı kolaylaştırıyoruz: "morgana rdc die cutter 3852"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.




























































































































