Kullanılmış Alwid Superior 48Hv/10Pp satın al (415)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Berlin
2.246 km
Itfaiye aracı
MANTGE 3 RTW Rettungswagen
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, güç: 132,39 kW (180,00 bg), yakıt türü: dizel, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 4x4, renk: beyaz, vites türü: otomatik, Üretim yılı: 2025, Donanım: ABS, diferansiyel kilidi, ek farlar, elektronik denge programı (ESP), hava yastığı, her tahrikli, immobilizer sistemi, klima, merkezi kilitleme, park ısıtıcısı, sisal lambaları, Are you looking for a reliable and affordable emergency response vehicle? Then you’re in the right place!
From our immediately available stock of new vehicles, we offer:
Ambulance RTW built on MAN TGE 3.180 4x4 All-Wheel Drive Emergency Medical Vehicle N-KTW
The solution for rough and wintry conditions: Our compact, all-wheel drive ambulance can be operated with a standard Class B (car) driving licence thanks to its permissible gross weight of only 3,500 kg.
Chassis:
• New MAN TGE 3.180, 4x4 all-wheel drive with automatic transmission
• Single tires (same track width) for superior off-road capability
Basic vehicle configuration:
• Driver’s cabin with two seats and lockable center console
Nledpfx Akexdlppsneb
• Airtight, glazed partition wall to the patient compartment
• Intercom system between driver’s cabin and patient compartment
• Map reading light
• Air conditioning and auxiliary heating
Patient compartment:
• Reinforced wall, ceiling, and floor construction protected against corrosion
• Thermally insulated walls and ceiling, climate-controlled patient compartment
• Touch panel for climate and lighting controls
• All surfaces are smooth and easy to disinfect
• Adjustable stretcher mount with roll-in stretcher
• Central oxygen supply system pre-installed with 2 ZGA connectors
• Mounts for 2 oxygen cylinders up to 20 liters and spineboard
• 2 wall rails for medical equipment (infusion pumps, syringe drivers, etc.)
• Four each 12V and 230V power sockets
• Numerous storage compartments, some lockable
• Color-coded storage system in the head area
• Storage for up to 3 emergency containers at the left exit
• Cabinet system with waste bin and washbasin
• 1 attendant seat at the head end
• 1 swivel seat on the right side
Safety and lighting:
• LED lightbar on the roof; colors (e.g., blue, red, green) freely selectable
• 2 LED front flashers, 2 angled flashers; colors separately controllable
• Reversing camera
• Work lights for the right side and rear area
We are happy to prepare a detailed offer for you and provide a thorough demonstration of the vehicle at our Berlin location.
All details provided to the best of our knowledge, without guarantee of completeness or accuracy. This listing is for informational purposes only and does not constitute a binding offer. Subject to prior sale!
Küçük ilan
Berlin
2.246 km
İtfaiye aracı — lojistik ekipman aracı
MANTGM 18.320 4x4 Allrad GW-L Einzelbereif.
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, güç: 235,36 kW (320,00 bg), yakıt türü: dizel, dingil konfigürasyonu: 4x4, Üretim yılı: 2025, Donanım: diferansiyel kilidi, hava yastığı, her tahrikli, hidrolik arka platform, klima, merkezi kilitleme, tır çekici bağlantısı, From our range of new vehicles, we offer the following:
Logistics Equipment Carrier GW-L All-Wheel Drive on off-road MAN TGM 18.320 chassis
Nljdpfexyud Usx Aknob
Our robust powerhouse for heavy-duty operations. Its excellent off-road capability ensures performance even in the most challenging conditions. Whether used in severe weather response, for establishing water supply, as a modular rescue or equipment carrier (with optional winch), or as an auxiliary water tender (TLF) with portable water tanks.
Chassis:
- MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW) and automated transmission
- Single wide tires (same track front and rear) for superior off-road mobility
Cab:
- Standard crew cab (1:5) in RAL 3000 (fire red)
- Cab equipped with auxiliary heater
Body:
- High-quality body construction made from rust- and corrosion-resistant materials
- Two spacious side equipment compartments
- Fold-out steps for every lateral compartment
- Bespoke stainless steel equipment storage solutions tailored to your requirements
Tail Lift:
- BÄR tail lift BC2000
- Aluminum platform Bär BC2000 S4-C4
- 2-button foot control
- Dual roll-off protection
- LED platform lighting
Safety and Lighting:
- LED mini light bar on the vehicle roof / 2 front LED flashers
- Pneumatic special signal system MARTIN-HORN
- Rear-view camera
- Comprehensive LED lighting in crew and all equipment compartments
- LED area lighting on the body and additional work lights
- Pneumatic LED light mast with remote control
We will be happy to provide you with a detailed offer and present the vehicle at our facility in Berlin.
All information provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement is for informational purposes only and does not constitute a binding offer. Subject to prior sale!
Küçük ilan
Berlin
2.246 km
Itfaiye aracı
Mercedes-BenzSprinter 519 TSF-W / MLF MB Sprinter 4 x
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, güç: 139,74 kW (189,99 bg), yakıt türü: dizel, dingil konfigürasyonu: 4x4, Üretim yılı: 2025, işletme ağırlığı: 5.500 kg, Donanım: ABS, diferansiyel kilidi, hava yastığı, her tahrikli, klima, From our immediately available stock of new vehicles, we offer you:
TSF-W / MLF Mercedes Sprinter 519 All-Wheel Drive 4x4 with Single Tires
Are you looking for a compact, off-road capable pump & rescue vehicle / small fire engine with an ample water supply, which can also be operated with the fire department driver’s license or a driver’s license up to 7.5 tons?
Then we have your solution!
Chassis:
• MB Sprinter 519 4x4 Euro 6 with manual transmission
• Track-width-matched single tires for superior off-road mobility
• Comprehensive standard equipment
• Vehicle height only 2.62 m
Cab:
• Standard crew compartment (1+5) in RAL 3000 (fire red)
• Air conditioning and auxiliary heater
Superstructure:
• High-quality frame construction made from rust- and corrosion-free materials
• Fold-out steps for each side equipment compartment
• Custom stainless steel equipment mounts to your specifications
Nledpfx Akoxfv R Hsnjb
• Walkable, non-slip vehicle roof
Vehicle Pump/Extinguishing Agent Tank:
• High-pressure extinguishing system with foam proportioning
• 1,000 l water tank with integrated 100 l foam agent tank
Firefighting Equipment:
• High-pressure rapid intervention system with 50 m rigid hose
Safety and Lighting:
• LED light bar on the vehicle roof / 2 LED front flashers
• Pneumatic special signal system
• 100 W loudspeaker system with announcement unit
• Reversing camera
• Comprehensive LED lighting in the crew and all equipment compartments
• LED area lighting around the superstructure and auxiliary spotlights
• Pneumatic LED light mast with remote control
• Optional winch
• Optional hygiene board
All information provided to the best of our knowledge, without guarantee of completeness or accuracy.
This advert does not constitute an offer, but serves as information only. Subject to prior sale!

Şimdi bilgi alın
+44 20 806 810 84
+44 20 806 810 84
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Fumane (Verona)
2.126 km
Kullanılmış KRONES cam şişe dolum hattı, saatte 20.000 şişeye kadar.
ACI
Çağrı
Koşul: ikinci el, makine/araç numarası: LC426, Used KRONES bottling line for glass bottles up to 20,000 bph (bottles/hour)
Introduction to the KRONES bottling line
The used KRONES bottling line for glass bottles has been highly sought after in industrial environments since its introduction, due to its reliability and efficiency. Comprised of a series of premium components, the complete KRONES bottling line ensures smooth operation and effectively meets the strict requirements of high-volume production.
Main Components
At the center of the line is the KRONES K-131-669 filler monobloc, manufactured in 2016, which serves as the core of the entire KRONES bottling line. With an impressive output of 20,000 bottles per hour, it is complemented by the KRONES 472-072 depalletizer from 1998 and the Gronemeyer RINSER 8983-400-4 from 2000. Together, this system enables a seamless and uninterrupted workflow from bottle unloading all the way through the filling process across the complete KRONES bottling line.
Quality Control of the Used KRONES Bottling Line
Ensuring product quality takes top priority in any bottling plant. The KRONES CHECKMAT inspector from 1999 therefore plays a central role in the complete KRONES bottling line. Equipped with advanced features for both fill level inspection and meticulous label checking, it ensures that every product meets the specified standards. Additionally, the ACI TA20 2 AE bottle dryer from 2000 ensures bottles are impeccably prepared for subsequent labeling and packaging steps, effectively eliminating moisture issues.
Labelling and Packaging
Efficient labeling and packaging are essential components of the KRONES bottling line. Accordingly, the KRONES STARTMATIC K-080-669 from 1999 excels in these areas. With precise label application and the capability to print directly onto glass bottles, it not only streamlines workflows but also enhances brand presentation in the used KRONES glass bottle filling line up to 20,000 bph. This is further complemented by the SMI SMI/7507 case packer from 1999 and the FRANPACK type 121971214 pallet wrapper from 1997, ensuring that products are safely packed and ready for shipment.
Operational Condition and Specifications
The KRONES bottling line is in flawless operational condition and meets the demands of modern production environments. With an impressive throughput of 20,000 bottles per hour, the line promises to boost operational efficiency while maintaining product quality. Specifically designed for glass containers and predominantly geared towards beer production, it ensures precise and consistent filling, which ultimately results in superior product quality and customer satisfaction.
Nodpfxovgvwms Aknolb
In summary, the KRONES bottling line represents a solid investment for businesses seeking to optimize their filling processes. With its robust construction, modern features, and proven performance, it is ready to deliver outstanding results and elevate production standards to the next level.
Küçük ilan
Stockstadt am Rhein
2.429 km
Silindirik taşlama makinesi
ReckordM 1432 B
Çağrı
Koşul: ikinci el, Üretim yılı: 2000, Fonksiyonellik: tamamen fonksiyonel, Used Cylindrical Grinding Machine Reckord M 1432 B
The Reckord M 1432 B is a high-performance universal cylindrical grinding machine that combines maximum precision with robust construction. With a minimum grinding wheel feed of just 0.0025 mm and exceptional roundness accuracy, it is ideally suited for demanding grinding tasks in both single-piece and series production.
Key Advantages at a Glance
Maximum Precision: Minimum grinding wheel infeed of 0.0025 mm ensures outstanding surface finishes and form accuracy.
Superior Flexibility: Suitable for external, internal, and face grinding – swiveling workhead (+90° / -30°) and table (+3° / -6°) enable taper and complex geometries.
Robust Construction: Heavy machine bed weighing approx. 4000 kg for maximum rigidity and vibration damping.
Powerful Drive: 4 kW grinding wheel motor allows for high removal rates and shorter machining times.
Ergonomic Operation: Clearly arranged controls for fast learning curve and intuitive operation.
Technical Data
Manufacturer Reckord
Model M 1432 B (Model 1000)
Type Universal Cylindrical Grinding Machine
Centre Height 180 mm
Max. Grinding Length 1000 mm
Max. Grinding Diameter 315 mm
Max. Workpiece Weight 150 kg
Workhead Speeds 40, 72, 128, 228 rpm
Grinding Wheel Size 400 x 50 x 203 mm
Grinding Motor Power 4 kW
Total Drive Power 7.8 kW
Machine Weight approx. 4000 kg
Dimensions (L x W x H) 3240 x 1760 x 1680 mm
Colour Blue (as is)
Condition Used, fully checked and operational
Availability Immediately ex-stock Stockstadt
Additional Information
Nlsdpeyxgldefx Akneb
Scope of Delivery: Cylindrical grinding machine Reckord M 1432 B including standard accessories as per the operating manual. Fully serviced and in working condition.
Technical Documentation: Supplied in German.
Optional Services: Commissioning and training by experienced technicians, maintenance contract, as well as financing and leasing offers available on request.
Inspection: The machine can be inspected in Stockstadt am Rhein by prior appointment.
Küçük ilan
Wöllstadt
2.427 km
Tartım-Dolum Makinesi C
Impuls Engineering GmbHAutomatische-Tubenfüll-Maschine C
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, Our state-of-the-art automatic tube filling machine is an all-round, versatile solution engineered to optimally support businesses with the highest quality standards. Thanks to its superior construction and wide application range, it offers intuitive operation that efficiently and reliably optimizes your tube filling processes.
The powerful drive units and user-friendly color touchscreen control system provide maximum flexibility during format and product changes, significantly simplifying your tube filling workflows. The machine is equipped with memory slots for quick and reproducible setting of all relevant machine parameters.
If you wish to optimize your tube filling processes through strong production performance while maintaining high quality, Impuls Packaging is your ideal partner.
System Overview
Specifications:
Power supply: AC 220V / 50Hz or 110V / 60Hz
Power: 4 kW
Filling range:
● 2–5 ml
● 5–30 ml
● 10–140 ml
● 30–300 ml (customizable)
Tube diameter: 10–50 mm (customizable)
Tube length: 30–250 mm (customizable)
Nlsdpfjyq Hgkex Akneb
Hopper volume: 50 L
Filling accuracy: ±1 %
Capacity: 40–60 tubes/minute
Machine size: 2050 × 900 × 1900 mm
Net weight: 850 kg
Küçük ilan
Pustodol Začretski
1.767 km
Plazma kesme aracı
Soitaab ImpiantiPlasma Red
Çağrı
Koşul: ikinci el, Üretim yılı: 2018, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: P5110, giriş voltajı: 230 V, maks. sac kalınlığı çelik: 80 mm, alüminyum sac kalınlığı (maks.): 50 mm, çalışma uzunluğu: 3.000 mm, çalışma genişliği: 1.500 mm, Prodaje se profesionalni CNC plazma rezač renomiranog talijanskog proizvođača Soitaab Impianti, model Plasma Red. Stroj je namijenjen visokoj preciznosti, dugovječnosti i radu u zahtjevnim industrijskim uvjetima.
Tehničke karakteristike:
• Radna površina: 3000 x 1500 mm
• Konstrukcija: Monoblok izvedba s integriranim stolom i vodilicama, što isključuje potrebu za posebnim temeljima i olakšava instalaciju.
• Sustav vođenja: Dvostruki sinkronizirani pogon po X-osi (portalni sustav) s preciznim linearnim vodilicama i brušenim zupčastim letvama.
• Upravljanje: Numerička CNC kontrola u boji s touch zaslonom, jednostavna za korištenje.
• Brzina pozicioniranja: Visoka radna dinamika uz izvrsnu preciznost ponavljanja.
• Sustav ventilacije: Integrirani stol s automatskim sekcijskim otvaranjem zaklopki za otvod plinova i prašine (vezano uz položaj rezne glave).
Ključne prednosti:
• Automatska regulacija visine (THC): Osigurava konstantnu udaljenost između baklje i materijala tijekom cijelog procesa rezanja.
• Anti-kolizijski sustav: Zaštita glave baklje od oštećenja pri sudaru s ostacima materijala.
• Kvaliteta reza: Idealan za rezanje crnih metala, nehrđajućeg čelika i aluminija uz visoku preciznost rubova.
• CAD/CAM softver: Kompatibilnost s profesionalnim programskim rješenjima za optimizaciju iskorištenja (nesting softver).
Nsdpjy H A Iwjfx Aknjlb
Kapaciteti rezanja:
• Crni lim: optimalno do 45 mm (maksimalno 80 mm)
• Nehrđajući čelik: optimalno do 38 mm (maksimalno do 75 mm)
• Aluminij: optimalno do 38 mm (maksimalno do 50 mm)
Stanje i napomene:
Stroj je redovito održavan i potpuno ispravan. Prodaje se u sklopu unapređenja proizvodnih kapaciteta. Detaljna lista opreme i tehnička dokumentacija dostupni su na uvid.
Küçük ilan
Sokołów Podlaski
1.801 km
CNC İŞLEME MERKEZİ 532
Metal Technics PolskaFrezarka CNC Centrum obróbcze 532
Çağrı
Koşul: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, besleme uzunluğu X ekseni: 500 mm, y ekseni ilerleme uzunluğu: 320 mm, Z ekseni ilerleme mesafesi: 420 mm, X ekseni hareket mesafesi: 500 mm, Y ekseni hareket mesafesi: 320 mm, Z ekseni hareket mesafesi: 420 mm, maksimum mil hızı: 8.000 dev/dak, toplam yükseklik: 2.530 mm, toplam genişlik: 1.950 mm, toplam uzunluk: 2.600 mm, masa genişliği: 260 mm, masa uzunluğu: 800 mm, giriş akımı türü: trifaze, toplam ağırlık: 2.600 kg, giriş voltajı: 400 V, garanti süresi: 12 aylar, Donanım: dokümantasyon / kılavuz, CNC MACHINING CENTER 532 (VMC 600/22 DIGITAL)
The modern CNC Machining Center 532 is a compact and powerful machine for precise metalworking. Thanks to its robust construction, high accuracy, and flexible control configurations, it is suitable for both mass production as well as small batch and single-part manufacturing.
This machine combines precision, reliability, and versatility, making it the ideal solution for manufacturing companies, toolmaking, and CNC workshops.
⚙️ Key Features and Functions
BT40 spindle / 8,000 rpm
Ideal for milling, drilling, and tapping
Tool magazine with 10–12 positions (Bamboo Hat)
Fast and efficient tool changes
Flexible CNC controls
Siemens 808D / 828D, Fanuc Oi-MF or GSK
Fully enclosed machine guard
For maximum safety and a clean working environment
High accuracy and repeatability
Positioning accuracy: 0.005 mm
Repeat accuracy: 0.003 mm / 300 mm
📐 Technical Specifications
Main drive power: 3.7 kW
Max. spindle speed: 8,000 rpm
Spindle taper: BT40
Table size: 800 × 260 mm
Travel (X/Y/Z): 500 / 320 / 420 mm
Distance spindle-table: 90 – 510 mm
Machine weight: 2,600 kg
Dimensions (L × W × H): 2,600 × 1,950 × 2,400 mm
🏗️ Stability and Precision
The compact and rigid design ensures low-vibration operation, even under demanding conditions. This results in superior surface quality and dimensional accuracy, making the machine ideal for precision manufacturing processes.
🚀 Application Areas
Milling
Drilling
Tapping
Machining of steel, aluminum, and alloys
Suitable for:
Mass production
Nljdpfoy Ht Axex Akneb
Toolmaking
CNC workshops
Manufacturing companies
💡 Additional Options
High-pressure coolant / Coolant through spindle
Tool measurement and probing system
Digital readout (DRO)
Increased table load capacity
Extended control configuration
✅ Advantages
✔ Excellent price-performance ratio
✔ High precision and repeatability
✔ Compact and stable design
✔ Versatile applications
✔ Flexible control options
📦 Additional Information
Model: CNC 532
Manufacturer code: VMC 600/22 DIGITAL
Condition: New, original packaging
Küçük ilan
Nattheim
2.267 km
Kayar masa testeresi
SCMSI 5
Çağrı
Koşul: ikinci el, Üretim yılı: 2022, SLIDING TABLE PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 MAIN FEATURES SLIDING TABLE: GUARANTEES CONSISTENTLY HIGH CUTTING QUALITY OVER TIME TELESCOPIC ARM: AN "UNBEATABLE" SMOOTH GUIDE SAW UNIT: FOR PERFECT CUTTING RESULTS Technical Data SI 5 Main saw blade diameter (mm): 550 Format cuts with extendable fence - with carriage 3200 mm - with carriage 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Maximum cutting height at 90° (mm): 200 Maximum cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extraction port diameter: - at the frame - at the blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring unit motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/sequencing control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store onto tablets compatible with iPadOS or Android operating systems. It can be activated via the QR code supplied with the machine. The app allows: * Management of machinery inventory and material/board stock * Project creation and editing, importing of projects from major furniture design software ("cpout" file format), and importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the app's built-in optimization software * Correct machine setup for each cut via simple, intuitive 3D sequencer graphics guiding the operator through every step * Printing of barcode labels for part identification, thanks to Bluetooth connectivity with compatible label printers. - 10-year warranty on the saw carriage sliding system - Sliding carriage completely in aluminum structure, with a guidance system on rolled, hardened, and arc-ground steel guides with large contact surface - Max. saw blade diameter* up to 450mm with installed scoring blade* up to 550mm without scoring blade - eye-S 15" electronic control complete with: * 15" touchscreen monitor * Direct control of the following axes in manual, semi-automatic, automatic, and incremental modes: - Main saw blade height adjustment - Saw unit tilting - Rip fence adjustment - Scorer height and lateral adjustment (the scorer is automatically raised to the set position when switched on and lowered when switched off) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with relative images * Ability to store up to 1000 different tools with images * Cutting sequence control of preloaded parametric machining programs * Environment for creating and saving new sequential operation programs * Automatic capturing of job dimensions from the Thundercut App * USB interface * Network interface ready - Auxiliary functions of electronic control, including: * Determination of correct fence position on the rip fence for angle cuts with tilted saw blade * Determination of correct fence position on the rip fence for miter cuts with miter gauge on the table with or without a tilted saw blade - Swiveling control panel above the table - Independent scoring unit
Nedpfoxqtvqjx Aknslb
Küçük ilan
Nattheim
2.267 km
CNC işleme merkezi
SCMMorbidelli M 100 (3-Achs)
Çağrı
Koşul: ikinci el, Üretim yılı: 2019, dahil. takım CNC KONTROLLÜ İŞLEME MERKEZİ morbidelli m100 Sizin için yapılmış delme ve frezeleme! Bu sayısal kontrollü işleme merkezi, ağaç işleme alanındaki her türlü gereksinimi karşılamak için frezeleme ve delme takımları için geniş bir aksesuar yelpazesiyle donatılmıştır. - Yüksek verimli - 8.000 dev/dak ve . delme milleri. Teknoloji, piyasadaki en istikrarlı mildir ve 1.000 saatten fazla bakım gerektirmeyen kullanım ömrüne sahiptir. - En iyi ve kapsamlı şekilde donatılmıştır - vantuzlar, makineyi gereksinimlere göre ayrı ayrı donatmak için TV FLEX çalışma masasıyla ayrı ayrı yapılandırılabilir. - Entegre Cad-Cam MAESTRO CNC yazılımı sayesinde kolay ve anlaşılır programlama - Kullanımı kolay, alçaltılmış makine gövdesi sayesinde çalışma masasına her zaman erişilebilir. Kontrol kabini ve vakum pompası makine yatağına entegre edilmiş olup, PRO SPACE varyantında ek yapısal koruma önlemlerine gerek yoktur. Destekleyici yapıDestekleyici yapı, oldukça sağlam, monolitik çelik tabandan, sağlam nervürlü ve çok sağlam bir yapıdan oluşmaktadır. Ekstra geniş taban, makinenin stabilitesini sağlamak ve tüm çalışma koşullarında sürekli hassasiyet sağlamak için özel olarak tasarlanmıştır. Makinenin zemine sabitlenmesine gerek yoktur. Taban, mobil sütun için büyük ve sağlam bir destek sağlar: çalışma ünitesi, en yoğun gerilimlere dayanabilen dengeli, sabit ve dirençli bir destekle donatılmıştır, böylece daha yüksek kalite sağlanır performans ve daha fazla hassasiyet. Mobil portal, tabana sabitlenmiş ve en iyi kalitede bilyeli dönüşe sahip kayar pabuçlu prizmatik kılavuzlar üzerinde hareket eden tek parçadan oluşur. Çalışma ünitesi buna bağlıdır ve Y ve Z boyunca da prizmatik kılavuzlar üzerinde hareket eder bilyalı geri dönüşlü kayar pabuçlu. Alt hareketli ünitenin (X ekseni) ve çalışma ünitesinin hareketli ünitenin hareketi (Y ekseni), helezon dişli kremayer/pinyon ile güç aktarımı sayesinde sağlanır; Bu, daha büyük bir dişten dişe itme kuvveti yaratır ve bu da daha büyük bir ivmelenme ve X ve Y eksenleri boyunca daha yüksek bir hız sağlar. Özel olarak tasarlanmış helezonik dişli, mekanik bileşenlerde daha az aşınma sağlar ve daha sessiz bir dikey Z ekseni, dinamik yükleme ve güçlü hızlanma ve yavaşlama ile mükemmel bir denge sağlayan bilyalı dönüşle tahrik edilen bir vida. Frezeleme için ana ünite doğrudan Z ekseni taşıyıcısına bağlanmıştır ve titreşimler X-Y-Z boyunca tamamen kaydırıldığı için çok yüksek kaliteli bir son işlem sağlar Statik invertörlerle tahrik edilen "fırçasız" motorlara sahip eksenler. Bunlar şunları sağlar: - İyileştirilmiş ivmelenme sayesinde azaltılmış işlem süreleri - Yüksek çözünürlüklü enkoder sayesinde daha iyi konumlandırma doğruluğu - Mutlak enkoderler sayesinde makineyi açarken kurulum faaliyetlerinin ortadan kaldırılması - Genel bakım faaliyetlerinin ortadan kaldırılması, çünkü "fırçasız" sistem Fırçalar yoktur. Eksen yer değiştirmesinin ve genel olarak makinenin çalışma elemanlarının yönetimi bir
Nlsdpovvi Scsfx Aknsb
Küçük ilan
Oğlananası
702 km
Holzspanmaschine
AVB MACHINERY LLCAVB-48
Çağrı
Üretim yılı: 2025, çalışma saatleri: 24 h, Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: AVB-48, AVB-48 Talaş Üretim Makinesi
Ağır Hizmet Performansı. Endüstriyel Güvenilirlik.
AVB-48, yüksek endüstriyel kapasite ve sürekli performans için tasarlanmış, en popüler ağır hizmet tip talaş makinelerimizden biridir. Gerek yuvarlak tomrukların gerekse artık ahşap parçalarının işlenmesine uygun olup, minimum malzeme boyutu gereksinimiyle ideal bir tomruk talaşı ve ahşap atık işleme çözümü sunar.
Dayanıklı ve uzun ömürlü gövde yapısıyla AVB-48, yoğun çalışma koşullarında bile maksimum dayanıklılık sağlar. Üstün kesim hassasiyeti ve uzun bıçak ömrü sunan T.C.T. karbür uçlu bıçaklarla donatılmıştır. İsteğe bağlı olarak, özellikle at ve hayvan yatağı talaşı üretimi için düz bıçaklarla da kullanılabilir.
Nlsdpfx Akexwizponob
Maksimum esneklik için opsiyonel bunker baskı sistemiyle donatılabilir; bu sistem küçük parçaların ve artıkların verimli şekilde işlenmesini sağlar.
AVB-48, planya tipi ve karbür bıçaklı çalışma prensiplerini destekleyerek üretiminize uygun bir esneklik sunar.
TEKNİK ÖZELLİKLER;
TEKNİK SPESİFİKASYONLAR AVB-48 veya AVB-48HELIX
Kesici kafa sayısı: 4
Kesici kafa uzunluğu: 60 cm
Bıçak sayısı: Her kafada 190 adet T.C.T. bıçak veya 7 düz bıçak
Güç Kaynağı: 4 x 11 kW = 44 kW (59 HP)
Bunker Çalışması: Hidrolik
Bunker Boyutları: 1500 x 600 x 900 mm
Çalışma Voltajı: 380 V 50-60 Hz
Konveyör Bant Motoru: 0,75 kW
Hidrolik Motor: 7,5 kW
Toplam Güç: 52,25 kW
Kesici kafa devri: 3000 dev/dk (rpm)
Kesici kafa çapı: 160 mm
Talaş kalınlığı: 0,2 mm - 1,2 mm
Maks. Tomruk Giriş Boyu: 75-150 cm
Maks. Tomruk Giriş Genişliği: 10-45 cm
Çalışma Mesafesi: 1200 mm
Makine Ölçüleri: U4300 x Y1700 x G1600 mm
Ağırlık: 3.500 kg
Üretim Kapasitesi: 1000-1200 kg/saat
Küçük ilan
Dinslaken
2.608 km
Elektrikli 4 tekerlekli forklift
NobleliftCPD25-A
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: CPD25A4800NEU2, Üretim yılı: 2025, yük kapasitesi: 2.500 kg, kaldırma yüksekliği: 4.800 mm, serbest kaldırma: 1.180 mm, direk tipi: triplex, inşaat yüksekliği: 2.225 mm, güç: 15 kW (20,39 bg), çatalların uzunluğu: 1.200 mm, boş ağırlık: 4.220 kg, toplam uzunluk: 2.605 mm, çekiş tipi: Lithium-Ionen, inşaat genişliği: 1.163 mm, Electric 4-wheel forklift
Chassis number: CPD25A4800NEU2
Nlodpfxjy Upzae Akneb
Load centre: 500 mm
ISO Class: ISO Class 2 = 1,000 - 2,500 kg
Mast type: Triplex
Condition: New machine
Technical condition: New
Front tyre type: Non-marking
Front tyre condition: New
Rear tyre type: Non-marking
Rear tyre condition: New
Battery voltage: 76V
Battery capacity: 280Ah
Battery type: Lithium-ion
Battery year: 2025
Battery condition: New
Description: The A-Series lithium-ion forklift is an innovative electric forklift truck, based on the proven architecture of internal combustion engine lift trucks and combining the benefits of state-of-the-art lithium battery technology. By merging a rugged construction with cutting-edge energy systems, this lithium-powered forklift provides a powerful alternative to conventional diesel or LPG forklifts. The A-Series stands out for its superior driving performance, high ergonomics, excellent reliability, and minimal maintenance costs. Thanks to its high load capacity and optimal suitability for outdoor use, it is the ideal solution for standard and heavy-duty applications in warehousing, logistics, or industry. The A-Series lithium forklift is aimed at businesses seeking to electrify their industrial trucks without sacrificing power or endurance. It meets all the requirements of traditional IC forklifts and allows for a seamless transition from fossil fuels to electric operation.
Side shifter, fork positioner, third valve, fourth valve, rear worklights, front worklights, heater, full cabin, CE certificate, safety light, lithium-ion technology, interior mirror, exterior mirror, windscreen wiper, LED lights,
- Electrically height-adjustable fingertip control - Blue Spot
Küçük ilan
Dinslaken
2.608 km
Elektrikli 4 tekerlekli forklift
NobleliftCPD25-A
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2025, yük kapasitesi: 2.500 kg, kaldırma yüksekliği: 4.800 mm, serbest kaldırma: 1.180 mm, direk tipi: triplex, inşaat yüksekliği: 2.225 mm, çatalların uzunluğu: 1.200 mm, boş ağırlık: 3.550 kg, toplam uzunluk: 2.628 mm, çekiş tipi: Lithium-Ionen, Electric 4-wheel forklift
Load center: 500 mm
ISO class: ISO class 2 = 1,000 - 2,500 kg
Mast type: Triplex
Condition: New
Technical condition: New
Front tires type: Non-marking
Front tires condition: New
Rear tires type: Non-marking
Rear tires condition: New
Njdjy Upy Aopfx Aknjlb
Battery voltage: 80V
Battery capacity: 175Ah
Battery type: Lithium-ion
Battery year: 2025
Battery condition: New
Description: The A-Series lithium-ion forklift is an innovative electric forklift, built on the proven architecture of internal combustion engine forklifts while integrating the advantages of state-of-the-art lithium battery technology. The combination of a robust chassis and cutting-edge energy system makes this lithium battery forklift a powerful alternative to traditional diesel or LPG forklifts. The A-Series stands out for its superior performance, high operator ergonomics, excellent reliability, and minimal maintenance costs. Its high load capacity and optimal suitability for outdoor operation make it the ideal solution for standard and heavy-duty applications in warehousing, logistics, or industrial environments. The A-Series lithium forklift is designed for companies looking to electrify their industrial trucks—without compromising on power or endurance. It meets all requirements of conventional IC forklifts and enables a seamless transition from fossil fuels to electric operation.
Sideshift,
3rd valve, 4th valve, heater, full cabin, interior mirror, windshield wiper, LED lighting,
Integrated charger
Küçük ilan
Dinslaken
2.608 km
Elektrikli 4 tekerlekli forklift
NobleliftCPD25-A
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: CPD25A6000NEU2, Üretim yılı: 2025, yük kapasitesi: 2.500 kg, kaldırma yüksekliği: 6.000 mm, serbest kaldırma: 1.630 mm, direk tipi: triplex, inşaat yüksekliği: 2.675 mm, güç: 15 kW (20,39 bg), çatalların uzunluğu: 1.200 mm, boş ağırlık: 4.220 kg, toplam uzunluk: 2.605 mm, çekiş tipi: Lithium-Ionen, inşaat genişliği: 1.163 mm, Electric 4-Wheel Forklift
Chassis Number: CPD25A6000NEU2
Load Center: 500 mm
ISO Class: ISO Class 2 (1,000 – 2,500 kg)
Mast Type: Triplex
Condition: New unit
Technical Condition: New
Front Tyres Type: Non-marking
Front Tyres Condition: New
Rear Tyres Type: Non-marking
Rear Tyres Condition: New
Battery Voltage: 76V
Battery Capacity: 280Ah
Battery Type: Lithium-ion
Battery Year: 2025
Battery Condition: New
Description: The A-Series lithium-ion forklift is an innovative electric forklift based on the proven architecture of internal combustion engine forklifts, combining the advantages of state-of-the-art lithium battery technology. Through a blend of robust construction and advanced energy systems, this lithium-battery electric forklift offers a high-performance alternative to traditional diesel or LPG trucks. The A-Series excels with superior vehicle performance, high ergonomics, outstanding reliability, and minimal maintenance costs. Thanks to its high load capacity and optimal suitability for outdoor applications, it is the ideal solution for standard and heavy-duty operations in warehousing, logistics, or industrial environments. The A-Series lithium forklift is designed for businesses looking to electrify their materials handling equipment without compromising on power or endurance. It meets all the requirements of conventional IC engine forklifts and allows for a seamless transition from fossil fuels to electric operation.
Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, cabin heater, full cab, CE certificate, safety light, lithium-ion technology, interior mirror, exterior mirror, windscreen wiper, LED,
- Electrically height-adjustable fingertip control
Nlodpfx Aoy Upypskneb
- Blue Spot
Küçük ilan
Dinslaken
2.608 km
Elektrikli 4 tekerlekli forklift
NobleliftCPD25-A
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: CPD25ANEU6000, Üretim yılı: 2025, yük kapasitesi: 2.500 kg, kaldırma yüksekliği: 6.000 mm, serbest kaldırma: 1.630 mm, direk tipi: triplex, inşaat yüksekliği: 2.675 mm, çatalların uzunluğu: 1.200 mm, boş ağırlık: 3.550 kg, toplam uzunluk: 2.628 mm, çekiş tipi: Lithium-Ionen, inşaat genişliği: 1.163 mm, Electric 4-Wheel Forklift
Chassis number: CPD25ANEU6000
Load center: 500 mm
ISO Class: ISO Class 2 = 1,000 - 2,500 kg
Mast type: Triplex
Condition: New machine
Technical condition: New
Front tire type: Non-marking
Front tire condition: New
Rear tire type: Non-marking
Rear tire condition: New
Battery voltage: 80V
Battery capacity: 175Ah
Battery type: Lithium-Ion
Battery year: 2025
Nsdpsy Upyisfx Aknelb
Battery condition: New
Description: The A-Series lithium-ion forklift is an innovative electric industrial truck based on the proven architecture of internal combustion engine forklifts, combining the advantages of cutting-edge lithium battery technology. Blending robust construction with an advanced energy system, this lithium-powered electric forklift offers a powerful alternative to conventional diesel or gas forklifts. The A-Series stands out for its superior vehicle performance, high ergonomics, excellent reliability, and minimal maintenance costs. Due to its high load capacity and optimal suitability for outdoor use, it is the ideal solution for both standard and heavy-duty applications in warehousing, logistics, and industry. The A-Series lithium forklift is designed for businesses looking to electrify their forklift fleet without compromising on power or endurance. It meets all the requirements of traditional combustion-engine forklifts and facilitates a seamless transition from fossil fuels to electric operation.
Side shifter,
3rd valve, 4th valve, heater, full cab, interior mirror, windscreen wiper, LED lighting,
Integrated charger.
Küçük ilan
Dinslaken
2.608 km
Manuel istifleyici
NobleliftSWB130D
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2025, yük kapasitesi: 1.300 kg, kaldırma yüksekliği: 4.200 mm, serbest kaldırma: 1.410 mm, direk tipi: triplex, inşaat yüksekliği: 1.986 mm, çatalların uzunluğu: 1.200 mm, boş ağırlık: 745 kg, toplam uzunluk: 1.762 mm, çekiş tipi: Lithium-Ionen, inşaat genişliği: 800 mm, High-lift pallet truck
Load centre: 500
Mast type: Triplex
Condition: New machine
Technical condition: New
Battery voltage: 24V
Battery capacity: 100Ah
Battery type: Lithium-ion
Year of battery manufacture: 2025
Nlodpfx Aksy Upmiensb
Battery condition: New
Description: SWB130D electric pallet truck – compact, ergonomic, powerful. The SWB130D is a modern lithium-powered electric pallet truck, ideal for supermarkets, warehouses and confined workspaces. With a maintenance-free lithium battery, rapid charging, and intelligent display, it delivers high efficiency – even in multi-shift operations. The ergonomic tiller with large LCD display, PIN code access, and user-friendly controls ensures comfortable operation. Safety features such as automatic speed reduction when cornering and emergency stop button provide added control. Easy maintenance thanks to the external diagnostic interface – no need to open the device. Perfect for anyone looking for a compact, safe, and powerful electric pallet truck.
Initial lift,
PIN code access, LCD display
Küçük ilan
Babberich
2.663 km
Rulo taşlama makinesi 1295 x 4267 x 40 t
FARREL50 x 14 CNC
Çağrı
Koşul: onarım gereklidir (kullanılmış), taşlama çapı: 1.295 mm, taşlama uzunluğu: 4.276 mm, Üretici: Farrel
Tür: 50 x 14 CNC
Kontrol: NUM 760
Yapım yılı: 1970
Nljdpjv Dia Ajfx Akneb
Büyük iş parçaları için yüksek hassasiyetli silindirik taşlama makinesi mi arıyorsunuz? Farrel 50 x 14 CNC Silindirik Taşlama Makinemiz mevcut! Bu makine, üstün doğruluk ve verimlilik sağlayarak hassas içbükey ve dışbükey taşlama gerektiren endüstriler için idealdir.
Temel Özellikler:
İçbükey taşlama mümkün
Covex taşlama mümkün
NUM 760 CNC Kontrolü
Sabit sabit dinlenme 2 x
Taşlar ve Flanşlar dahil
özellikler
Metrik ABD Standardı
merkez yüksekliği
647 mm
öğütme çapı Ø
1295 mm
öğütme uzunluğu
4267 mm
Boyutlar bileme taşı
914x152 mm
öğütme taşının hızı
400 - 1200 devir/dakika
Soğutma sistemi
Evet
boyutlar (tahmini)
uzunluk
8500 mm
Genişlik
4500 mm
Yükseklik
3200 mm
Ağırlık
78.000 kilo
Lütfen dikkat: Bu sayfadaki bilgilerin tarafımızca doğru olduğuna inanılmaktadır ve mümkünse üreticiden alınmıştır. Bilgiler iyi niyetle sağlanmıştır ancak doğruluğu garanti edilemez. Buna göre, bunlar bir temsil ve sözleşmesel koşul oluşturmayacaktır. Tüm önemli ayrıntıları incelemenizi öneririz.
Küçük ilan
Siedlce
1.776 km
Bıçak milli planya-kalınlık makinesi
CORMAKPT310ECO
Çağrı
Koşul: yeni, Üretim yılı: 2026, CORMAK PT310ECO Planer-Thicknesser with Cutter Block – Precision Machining and Work Efficiency
The CORMAK PT310ECO is a modern planer-thicknesser designed for high-quality finishing, reliability, and low noise levels. Equipped with a cutter block, this advanced woodworking machine combines the functions of a jointer and thicknesser within a robust single unit. Its stable frame and high-performance motor make it a versatile solution for professional woodworking operations – ideal for both carpentry shops and artisan workshops.
Key Features
- Cutter block – Three HSS knives (310x25x3 mm) ensure long service life, precise planing, and reduced noise emissions.
- Heavy-duty work tables – Made from cast iron to minimize vibrations and provide stable material support.
- High power – A 2.2 kW (S1) / 2.6 kW (S6) motor delivers consistent performance, even during demanding applications.
- Large working area – 310 mm planing width and up to 180 mm thickness capacity allow for processing a wide variety of workpieces.
- Efficient chip extraction – 100 mm diameter port for easy connection to an extraction system.
Construction and Technology
The PT310ECO model is fitted with a 75 mm diameter cutter block, ensuring smooth operation and greater durability than conventional knives. The planer-thicknesser features cast iron work tables measuring 1290x310 mm (jointer) and 540x310 mm (thicknesser), offering exceptional wear resistance. Additionally, the machine includes fence angle adjustment from 90–45°, enabling precise material guidance at various angles.
Precision and Performance
This unit allows for a maximum cutting depth of 3 mm in jointer mode and 4 mm in thicknessing mode. With a cutter block speed of 5500 rpm and a sturdy construction, it delivers surfaces ready for gluing, lacquering, or further processing. It is a reliable thickness planer suitable for both serial production and smaller-scale projects.
Applications
The PT310ECO planer-jointer is ideal for:
Nlsdpfx Akjw Ab Twsneb
- Professional carpentry and furniture workshops
- Prototyping studios and training centers
- Maintenance departments in industrial plants
- Technical schools and trade colleges
Standard Equipment
- Three-knife cutter block
- Cast iron work tables
- Cutter head guard
- 100 mm chip extraction port
- Feed switch and safety switch
Optional Equipment
- Mobile base
- Chip extraction unit
Technical Specifications
Jointer table dimensions: 1290x310 mm
Thicknesser table dimensions: 540x310 mm
Cutter block diameter: 75 mm
Cutter block speed: 5500 rpm
Number/size of knives: 3 / 310 x 25 x 2.5 mm
Fence tilt angle: 90–45°
Chip extraction outlet: 100 mm
Max. thicknessing height: 180 mm
Max. cutting depth: 3 mm (jointer) / 4 mm (thicknesser)
Motor power (S1/S6): S1: 2.2 kW / S6: 2.6 kW
Max. workpiece width: 310 mm
Weight (gross): 200 kg
Choose efficiency and durability. Opt for the CORMAK PT310ECO Planer-Thicknesser with Cutter Block and ensure the highest standards of woodworking for your production. Contact our technical advisor today.
Küçük ilan
Wöllstadt
2.427 km
Hortumlu Paketleme Makinesi Multitalent C
Impuls PackagingFlowpack Multitalent 304 TF 200/80/600 C
Çağrı
Koşul: yeni, Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, garanti süresi: 12 aylar, The all-rounder combines outstanding workmanship with a wide range of applications. Our machine also offers intuitive operation that optimizes your packaging processes.
A high-quality material unwinder with double automatic roll centering ensures precise material guidance. Furthermore, our active material feed system guarantees optimal web tension for flawless packaging results.
The highly powerful brushless motors and the user-friendly color touchscreen control system provide you with maximum flexibility for format changes, significantly streamlining your packaging operations. The machine features memory slots for machine parameter settings, allowing up to 50 different products to be stored.
Nedpjwld Upefx Aknolb
For this packaging line, we also offer fully and semi-automatic feeding systems, which can be retrofitted at your request. The machine is available in either running direction and includes a rotary end sealing unit with an electronic overload protection switch for maximum safety.
Thanks to its performance, versatility, and advanced technology, our machine is ideally suited for packaging food items such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items.
If you are looking to optimize your packaging processes with robust performance and high quality, Impuls Packaging is your ideal partner.
System Features
1. Chain conveyor belt, 2.6 meters long (other lengths available on request)
2. Adjustable bag former
3. Single film feed + automatic film centering device
4. Rotary end sealing, single sealing jaw
5. Sturdy, central fin seal structure
6. Four servo-drive units:
- Active film advance roller
- Middle sealing
- End sealing
- Conveyor belt
7. HMI control panel
8. Three individual temperature controllers
9. Housing made of 304 stainless steel
10. Documentation in the local language
11. Print mark control
12. Programmable bag length or fully automatic product length detection
13. Standard direction of operation: left to right
Technical Specifications
1. Product length: L120–500 mm
2. Product width: W30–200 mm
3. Product height: H10–80 mm
4. Packaging speed: up to 100 products/min (depending on product, bag length, and material)
5. Maximum film width: 600 mm
6. Supply voltage: 1Ph. 220V 50Hz
7. Total power: approx. 4.8 kW
8. Machine weight: approx. 550 kg
9. Machine dimensions: approx. 4280 x 1200 x 1230 mm
Küçük ilan
Bodzanów
1.709 km
Pastırma Dilimleme Makinesi TAK- TRIBUS TİP SSE
TAK- TRIBUSSSE18
Çağrı
Koşul: mükemmel (kullanılmış), Üretim yılı: 2018, Technical Data
Machine length: 950 mm
Machine width: 800 mm
Machine height: 1720 mm
Working height: 1030 mm
Machine weight: 400 kg
Operating capacity: ≤ 1200 cuts/h
Cutting length: 550 mm
Product height: ≤ 250 mm
Features
Open work area protected by a surrounding light barrier
Very stable stainless steel construction
Dynamic electric drive
Nsdpfx Akoy Di R Honslb
Top cutting results
Consistent product size thanks to side stop
Removable cutting boards
Convenient operation
Highest safety standards
Outstanding hygiene requirements
Suitable for frozen products
Year of manufacture: 2018
Machine in perfect condition
This professional slicer for ham and bacon demonstrates its full potential in both artisanal workshops and industrial operations. It enables perfect slicing of cooked ham, bacon, streaky bacon, back bacon, and hard cheese, even when frozen. The dynamic electric drive ensures exceptional performance. The professional slicer features user-friendly operation and the highest safety standards.
For use exclusively as a bacon slicer, we recommend the TRIBUcut Profi with shorter blade stroke and high cutting speed.
Slicing and portioning are key stages in bacon production. Every bacon producer has different requirements in this area. However, all bacon slicers must operate with high precision and speed.
With TRIBUcut, we offer you the best solution for portioning bacon and ham, in both a compact design for shops and small-scale production, as well as for industrial bacon processing. Tribus bacon slicers impress with their robust stainless steel design and guarantee consistently optimal slicing results.
Küçük ilan
Brzesko
1.682 km
Taski Procarpet 45 halı temizleme makinesi
TaskiProcarpet 45 Carpet Cleaner NEW!
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, çalışma genişliği: 450 mm, alan performansı: 495 m²/saat, toplam ağırlık: 55 kg, garanti süresi: 12 aylar, giriş voltajı: 230 V, su tankı kapasitesi: 45 l, Technical Data:
Model: Procarpet 45
Manufacturer: Taski
Type: Carpet and Upholstery Cleaning Machine
Country of Manufacture: Switzerland
Series: Professional
Condition: New
Theoretical Performance: 495 m²/h
Empty Weight: 55 kg
Working Width: 450 mm
Brush Motor: 650 W
Vacuum Motor: 1000 W
Fresh Water Tank: 45 l
Waste Water Tank: 45 l
Njdpsy Aw A Uefx Aknolb
Brush Speed: 1000 rpm
Brush Pressure: 10–17 kg
Cable Length: 15 m
Rated Voltage: 230 V
Dimensions: 82 x 56 x 86 cm (L x W x H)
Why Taski Procarpet 45?
The Taski Procarpet 45 combines high performance, versatility, and professional cleaning quality. Designed for large areas, its 45 cm working width and high-capacity tanks (45 liters each) allow for extended, uninterrupted cleaning sessions, thereby increasing work efficiency.
One of its major advantages is the 2-in-1 system, which allows you to switch between intensive extraction washing and fast encapsulation cleaning. This lets you optimally adapt the cleaning method to the degree of soiling and available time – from deep cleaning to quick touch-ups with short drying times.
Another key benefit of this machine is its efficiency. The cylindrical brush and powerful dual-vacuum system ensure thorough dirt removal and optimal carpet drying. The result: superior cleaning performance and quicker carpet reusability.
User-Friendliness and Ergonomics:
The control panel is intuitive and simple to use, while the design of the machine provides excellent visibility of the working area.
Professional Cleaning:
Equipped with a 45 cm working brush and a 45-liter tank, the machine perfectly combines compactness with the ability to clean larger floor spaces.
Perfect for Daily Use:
The Taski Procarpet 45 is a robust, durable, and reliable unit engineered for longevity and professional use.
Güven mührü
Machineseeker tarafından sertifikalandırılmış bayiler

Küçük ilan
İspanya
2.465 km
Finn-Power SG6 12.61
FINNPOWERSG6 12.61
Çağrı
Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2010, toplam ağırlık: 23.000 kg, delme kuvveti: 31 t, kontrolör üreticisi: SIEMENS, sac kalınlığı (maks.): 6 mm, eksen sayısı: 11, Bu 11 eksenli Finn-Power SG6 12.61 2010 yılında üretilmiştir. Maksimum 300 kN delme kuvvetine sahiptir ve 6 mm'ye kadar sac kalınlıklarını işleyebilir. Makine, 20 istasyonlu kalın bir taret ve verimli parça ayırma için entegre bir CNC dik açılı makas içerir. Yüksek kaliteli zımbalama yetenekleri elde etmek istiyorsanız, satılık Finn-Power SG6 12.61 zımbalama ve bükme makinesini düşünün. Daha fazla ayrıntı için bizimle iletişime geçin.
• Maks. delme çapı: yaklaşık 88,9 mm (3 mm çelikte)
• Delme hızı: 600 hpm'ye kadar (kısa adım)
• Konumlandırma hassasiyeti: ±0,1 mm
• Maks. sac boyutu: 1500 x 2500 mm
• Otomatik yeniden konumlandırma: evet, CNC kelepçeler aracılığıyla
• Kelepçe sayısı: 2 (akıllı yeniden konumlandırma ile)
• Yükleme/boşaltma özelliği: manuel veya otomatik (yapılandırmaya bağlı)
• Taret: Kalın Taret / Trumpf tarzı
• İstasyon sayısı: 20
• Entegre makas: CNC dik açılı makas
• Kesme kapasitesi: 6 mm'ye kadar (yumuşak çelik)
• Proses avantajı: mikro bağlantılar veya ikincil işlemler olmadan parça ayırma
• Kenar kalitesi: geleneksel nibblingden daha üstün
• Kontrol ünitesi: Finn-Power / Siemens
Nlodpfsy H Iluox Aknob
• Yazılım NC Express / Tulus
• Fonksiyonlar: otomatik yerleştirme; optimize edilmiş delme ve kesme dizileri
• Diyagnostik: kendi kendine diyagnostik ve destekli bakım
Küçük ilan
Cocoșești
1.018 km
Ağır malzemeler için Üçlü Besleme
Durkopp Adler367
Çağrı
Koşul: mükemmel (kullanılmış), 20 adet/stok
Durkopp Adler 367 Üçlü Beslemeli Dikiş Makinesi Teknik özellikler : - otomatik iplik kesme - otomatik bacak kaldırma - otomatik takviye - ekonomik motor EFKA 220v Arabalar çok iyi durumda yenilenmiştir Her türlü kalın malzeme için uygundur: döşeme, deri, sentetik, vb Garanti ve Teslimat Bileşen: komple de livery araba Makinelerin kalite güvencesi tamamen profesyonel teknisyen ekibimiz tarafından verilmektedir. Makine üstün kalitede olup, her türlü atölyenin yanı sıra orta ve büyük üretim yapan fabrikalar için tavsiye edilir. Bu makineyi satın aldığınızda, 6 aylık garantiye ve 5 yıllık garanti sonrası garantiye sahip olursunuz. Dünyanın her yerine teslimat!
Nsdpfx Aolgvpkoknslb
Küçük ilan
Przemyśl
1.556 km
Vida kompresörü
KAESER CSD 85 ROTARY SCREW AIRCOMPRESSOR
Çağrı
Koşul: yeni gibi (kullanılmış), Üretim yılı: 2013, Hersteller: Kaeser Kompressoren, Deutschland
Baujahr: 2013
Maximaler Betriebsdruck: bis zu 13 Bar
Liefermenge: 8,26 m³/min
Energieeffizienz: Der Direktantrieb in Verbindung mit IE4-Effizienzmotoren (bzw. IE5 bei SFC-Modellen) gewährleistet höchste Energieeffizienz.
Wartungsarm: Die Komponenten sind für eine lange Lebensdauer ausgelegt und ermöglichen einen einfachen Wartungszugang.
SIGMA Control 2: Sorgt für effiziente Überwachung und Steuerung des Kompressors.
Kompressortyp: Schraubenkompressor, ölgeschmiert
Schallpegel: 70 dB
Nedpfxoyy U Shs Aknelb
Höhe: 1.900 mm
Länge: 1.110 mm
Breite: 1.760 mm
Gewicht: 1.250 kg
Elektrische Parameter:
Netzspannung: 380~400 V
Leistungsaufnahme: 45 kW
Frequenz: 50 Hz
Anwendermerkmale:
Kühlungssystem: Wasserkühlung möglich, mit anschließender Wärmerückgewinnung
Komplettes, betriebsbereites System
Vollautomatischer Betrieb
Hocheffektive Schalldämmung
Schwingungsisolierung
Pulverbeschichtete Gehäuseteile
Für Umgebungstemperaturen bis +45°C geeignet
Einfache Wartung: Schmiernippel für Motorlager sind außenliegend angeordnet (auch für den Lüftermotor).
Küçük ilan
Bulgaristan
851 km
Toz kaplamalar için XTS 35
XtrutechXTS 35
Çağrı
Üretim yılı: 2023, Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, Xtrutech XTS 35 para recubrimientos en polvo (180-350 kg/h)
1. PROPÓSITO Y FUNCIONES PRINCIPALES DE LA LÍNEA
La línea de extrusión para la producción de recubrimientos en polvo forma parte integral de todo el proceso productivo y se utiliza para la elaboración de recubrimientos en polvo a base de polímeros. Esta línea integra los siguientes procesos tecnológicos: formación de una masa fundida homogénea mediante mezclado, conformado del fundido, posterior enfriamiento del producto y su trituración hasta obtener fracciones finas.
2. COMPONENTES DE LA LÍNEA
- Extrusora de doble husillo tipo XTS
Nodpfswz Ntiex Aknelb
3. DESCRIPCIÓN DE LOS COMPONENTES DE LA EXTRUSORA
3.1. Extrusora de doble husillo tipo XTS 35
La extrusora para la producción de recubrimientos en polvo consta de:
- Camisas de 24D de apertura hidráulica tanto superior como inferior para un acceso rápido en tareas de limpieza, mantenimiento y reparación de emergencia de los revestimientos del cilindro y los ejes de los elementos del husillo.
- Tolva de carga rectangular para la dosificación de materiales de difícil manejo.
- Unidades robustas de alto caudal refrigeradas por agua con 5 zonas de control de temperatura, cada una equipada con placas calefactoras de aluminio bronce de 2kW, que garantizan un excelente control térmico. Temperatura máxima de funcionamiento: 350°C.
- El extremo de descarga del cilindro incorpora un adaptador refrigerado y cuchilla de corte.
- Husillos con elementos modulares. Velocidad de giro del husillo de 0 a 900 rpm. Motor de corriente alterna refrigerado por agua de 26kW. Caja de cambios de velocidad continua (PIV), par nominal de 139Nm y protección mediante limitador de par automático.
- Acoplamiento rápido/embrague de conexión de eje y eje dentado.
Alimentación: 400V ±6%, 3 fases, 50 Hz (más tierra). Control: 24V.
Suministro de agua: 70 l/min a 15°C y presión del refrigerante de 4 bar.
Dimensiones aproximadas: Largo = 2250 mm Ancho = 1000 mm Alto = 1600 mm
Peso aproximado: 1600 kg.
Geometría de alto rendimiento D/d = 1,8
Potencia del motor AC: 26 kW
Velocidad del husillo: 900 rpm
Capacidad media: 180 - 220 kg/h, máx. 350 kg/h
Sizin için aramayı kolaylaştırıyoruz: "alwid superior 48hv/10pp"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+44 20 806 810 84
+44 20 806 810 84
Şimdi ilan ver
*ilan başına/ay




















































































































































































































