Kullanılmış Farleygreene Sieve satın al (394)

Durum: yeni gibi (sergi parçası), Üretim yılı: 2026, Sessiz ve yavaş çalışan WL 4/18,5 kW Teknik veriler: Hazne açıklığı: 600 x 800 mm Logspacer ile hazne açıklığı: 600 x 1050 mm Hazne kapasitesi: yaklaşık 0,6 m³ Rotorun çalışma genişliği: 600 mm Rotor çapı: 252 mm Bıçak sayısı: 28 adet Bıçaklar: 40 x 40 mm içbükey Elek perforasyonu: 15/20 mm Dahil edilmiştir: Kontrol kabini Elektrik kontrolü Yıldız-delta başlatma Kauçuk titreşim elemanları 2. sıra bıçaklar Logspacer (serbest kesim haznesi) Üst ekipman Konum: Stoktan çıkış Bitburg - hemen temin edilebilir - özel fiyatla Lodpfxjbtnfte Aiiohh

Durum: yeni gibi (sergi parçası), Üretim yılı: 2026, Sessiz ve yavaş yolluk WL 4 / 18,5 kW Teknik veriler: Hazne açıklığı: 600 x 800 mm Kütük ara parçalı hazne açıklığı: 600 x 1050 mm Hazne içeriği: yaklaşık 0,6 m³ Rotorun çalışma genişliği: 600 mm Rotor çapı: 252 mm Bıçak sayısı: 28 adet bıçak: 40 x 40 mm içbükey elek perforasyonu: 15/20 mm Dahil: şalter panosu elektrik kumandası yıldız üçgen başlatma kauçuk salınım elemanları 2. bıçak sırası Logspacer (serbest kesme hunisi) Yer: 54634 Bitburg Hemen kullanılabilir Lhjdpfx Aebunq Hjiish

Durum: yeni, Üretim yılı: 2026, Weima tek şaftlı parçalayıcı tip WL 6 Güç 18,5 kW Makine konseptimiz WL 6 Esnek uygulama seçenekleriyle Weima yüksek performanslı parçalayıcılar, her tür ahşap esaslı malzemeyi (sert ahşap, yumuşak ahşap, sunta, MDF malzemeleri, kontrplak, kontrplak, kaplama artıkları vb) burada yakıt yongalarına, hacimli malzemelerle, malzeme hacminde muazzam bir azalma. Nasıl çalışır: Makine büyük bir hazne ile donatılmıştır ve bir taşıma bandı veya elle yüklenebilir. Bu huni, bireysel ihtiyaçlara göre ayarlanabilir ve manuel yardıma ihtiyaç duymadan sürekli ve uygun maliyetli malzeme beslemesini garanti eder. Teknik özellikler WL 6 / 18,5 kW Hazne açıklığı: 800 x 1.000 mm Hazne kapasitesi: 0,9 m³ Rotorun çalışma genişliği: 800 mm Rotor çapı: 252 mm Tahrik gücü: 18,5 kW Rotor hızı: 80-120 rpm Bıçak sayısı: 42 Parça Bıçağın tipi ve boyutu: içbükey / 40 x 40 mm, kesme tepeleri Elek deliği: 10-60 mm mümkün (standart 15-20 mm) Kaplama: WEIMA standardı RAL 2002 / 7016 Bağlantı değeri: 400 V +/- 5 % / 50 Hz ağırlık 1.600 kg Şunları içerir: - Elektrik kontrolü (Moeller / Siemens) ve yıldız-üçgen başlatma dahil kontrol kabini (Rittal) - Lastik salınımlı elemanlar - V - Profilde frezelenmiş bıçak cepli rotor (patentli) - Dişli limit anahtarı - Anpressle Lhodpfx Aijh Hnp Dsioh

Durum: yeni, Üretim yılı: 2026, Weima tek şaftlı parçalayıcı tip WL 6 Güç 18,5 kW Makine konseptimiz WL 6 Esnek uygulama seçenekleriyle Weima yüksek performanslı parçalayıcılar, her tür ahşap esaslı malzemeyi (sert ahşap, yumuşak ahşap, sunta, MDF malzemeleri, kontrplak, kontrplak, kaplama artıkları vb) burada yakıt yongalarına, hacimli malzemelerle, malzeme hacminde muazzam bir azalma. Nasıl çalışır: Makine büyük bir hazne ile donatılmıştır ve bir taşıma bandı veya elle yüklenebilir. Bu hazne, bireysel ihtiyaçlara göre ayarlanabilir ve manuel yardıma ihtiyaç duymadan sürekli ve uygun maliyetli malzeme beslemesini garanti eder. Vqwemi Teknik özellikler WL 6 / 18,5 kW Hazne açıklığı: 800 x 1.000 mm Hazne içeriği: 0,9 m³ Rotorun çalışma genişliği: 800 mm Rotor çapı: 252 mm Tahrik gücü: 18,5 kW Rotor hızı: 80-120 rpm Bıçak sayısı : 42 adet Bıçak tipi ve boyutu: içbükey / 40 x 40 mm, kesme tepeleri Elek deliği: 10-60 mm mümkün (standart 15-20 mm) Kaplama: WEIMA standardı RAL 2002 / 7016 Bağlantı değeri: 400 V +/- %5 / 50 Hz Ağırlık: yaklaşık 1.600 kg İçerir: - Elektrik kontrolü (Moeller/Siemens) ve yıldız-üçgen başlatma dahil kontrol kabini (Rittal) - Lastik salınımlı elemanlar - V - Frezelenmiş bıçak cepli rotor (patentli) profil - Dişli limit anahtarı - Bir Ledpfxeh Eiw Ij Aiiohh

Durum: yeni, Üretim yılı: 2026, Weima tek şaftlı parçalayıcı tip WL 6 Güç 18,5 kW Makine konseptimiz WL 6 Esnek uygulama seçenekleriyle Weima yüksek performanslı parçalayıcılar, her tür ahşap esaslı malzemeyi (sert ahşap, yumuşak ahşap, sunta, MDF malzemeleri, kontrplak, kontrplak, kaplama artıkları vb) burada yakıt yongalarına, hacimli malzemelerle, malzeme hacminde muazzam bir azalma. Nasıl çalışır: Makine büyük bir hazne ile donatılmıştır ve bir taşıma bandı veya elle yüklenebilir. Bu huni, bireysel ihtiyaçlara göre ayarlanabilir ve manuel yardıma ihtiyaç duymadan sürekli ve uygun maliyetli malzeme beslemesini garanti eder. Teknik özellikler WL 6 / 18,5 kW Hazne açıklığı: 800 x 1.000 mm Hazne kapasitesi: 0,9 m³ Rotorun çalışma genişliği: 800 mm Rotor çapı: 252 mm Tahrik gücü: 18,5 kW Rotor hızı: 80-120 rpm Bıçak sayısı: 42 Parça Bıçağın tipi ve boyutu: içbükey / 40 x 40 mm, kesme tepeleri Elek deliği: 10-60 mm mümkün (standart 15-20 mm) Kaplama: WEIMA standardı RAL 2002 / 7016 Bağlantı değeri: 400 V +/- 5 % / 50 Hz ağırlık 1.600 kg Şunları içerir: - Elektrik kontrolü (Moeller / Siemens) ve yıldız-üçgen başlatma dahil kontrol kabini (Rittal) - Lastik salınımlı elemanlar - V - Profilde frezelenmiş bıçak cepli rotor (patentli) - Dişli limit anahtarı - Anpressle Lhjdpfocbtpkjx Aiish

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2019, çalışma saatleri: 957 h, giriş akımı türü: trifaze, toplam ağırlık: 600 kg, giriş voltajı: 400 V, giriş frekansı: 50 Hz, lazer gücü: 30 W, besleme uzunluğu X ekseni: 200 mm, y ekseni ilerleme uzunluğu: 250 mm, Z ekseni ilerleme mesafesi: 330 mm, azami seyir hızı: 20 mm/dak, EOS Formiga P110 Velocis Complete System – incl. Peripheral Equipment & Accessories For sale is a powerful and reliable EOS Formiga P110 Velocis system for industrial 3D printing using the SLS (Selective Laser Sintering) process. _____ Machine Details: • Model: EOS Formiga P110 Velocis • Year of manufacture: 2019 • Operating hours: only 957 h • Process: Selective Laser Sintering (SLS) • Condition: very good, fully functional • Accessories and peripheral devices: complete and original from EOS _____ Technical Data: • Build volume: 200 x 250 x 330 mm (X x Y x Z) • Laser: CO₂ laser, 30 W • Layer thickness: 0.06 – 0.12 mm • Build speed: up to 20 mm/h (z-axis, material-dependent) • Materials: PA12, PA11, TPU, and other SLS-compatible polymers • Power supply: 400 V, 3~ / 50 Hz • Compressed air: required • Software: EOSPRINT / Material Management System • Machine weight: approx. 600 kg _____ Scope of Supply (Complete System): • EOS Formiga P110 Velocis • Unpacking and sieving station P1/P3 • Mixing station P1 for recycled powder (material preparation for cost-efficient operation) • Sandblasting cabin Leering type DI-12 (professional post-processing of components) • Ruwac extractor type WS 200H Zone 22 Ex-protected (for safe handling of plastic powder) • 4x material containers • 2x build containers _____ Key Features: Lhedoy El Anepfx Aiioh • Very low operating hours (only 957 h) → almost like new • Complete, ready-to-use SLS system • High productivity thanks to Velocis technology • Closed material cycle → reduced material costs • Industrial standard – ideal for professional applications • All accessories original EOS → perfect system integration _____ Fields of Application: • Prototyping • Small batch production • Spare parts & customized components If you have any questions or require further information, feel free to send us a message or call us. Viewings are possible by appointment.

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 6.800 kg, azami yük ağırlığı: 28.200 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.000 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 13.200 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.645 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", lastik durumu: 100 yüzde, Customised transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customised according to the customer’s specifications. Chassis – Semitrailer for Freight Forwarding Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin, mounting position for warning signs at the rear, outer frame with "Load-Lock profile" for lashing strap hooks, 24 ton, 2-speed landing gear, single-side operation, ferry lashing eyes, yellow marked, with 2 at the rear as towing eyes, container locks: 4 pairs of container locks recessed in the floor for 2 x 20-foot or 1 x 40-foot containers, stake pockets recessed in the outer frame, internal dimension 80 x 80 mm, centre stake pockets recessed in the floor, 80 x 80 mm, removable stakes B=80 / D=80 / L=1200 mm, hot-dip galvanised, lashing eyes recessed in the outer frame, 5 ton each, 2 storage boxes approx. W=1230 / H=450 mm, fitted closed across the full width in front of the axles, instead of side underrun protection, frontmost locking as insertable pin, transverse lashing/ stake rails recessed in the floor across the full width to the outer frame, approx. 100 mm high, fitted with 20 mm round steel rods top and bottom, vertical spacing approx. 60 mm, bottom with angle plate at the end, half open downwards. For lashing and fitting of 80 x 80 mm stakes. Storage compartment for warning signs, open, according to technical feasibility. Axles & Suspension SAF disc brake axles (axle/chassis laser-aligned) to reduce tyre wear and fuel consumption, air suspension, first axle with automatic lift function, including automatic lowering and drive-off aid, operated by “3x brake”, two ride heights adjustable via hand button: - 1 x for coupling height 1120 mm - 1 x for coupling height 1200 mm Braking System 2-line compressed air braking system, colour-coded pipe routing for easy servicing, spring-loaded parking brake, 2 fail-safe Coupling heads at front, EBS (Electronic Braking System) with EBS socket at the front, with raise and lower valve, vehicle stability control. Wheels and Tyres 385/65 R 22.5" steel rims, finished in factory silver. Electrics 24 volts, 4 x 3-chamber tail lights, yellow LED side marker lights, 2 white LED position lights at the front, 2 white/red LED lane marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable, rotating beacon with bracket controlled via parking light (removable beacon), 2 pairs of warning signs, double LED illuminated, extendable to 4500 mm and removable with plug connector. Ledpfxezb Iu Dj Aiishh With additional bracket at the rear. Additional 7-pin socket (to ISO 1724) in rear underrun protection. Floor Birch plywood flooring approx. 30 mm thick, cross joints with omega inlay, mounted on longitudinal beams for high point load capacity, suitable for forklift axle load up to max. 7100 kg. Front Bulkhead / Front Corner Posts 25 mm aluminium hollow profile, 1650 mm high, corner posts in steel (volume type), front wall interior additionally reinforced with 1250 mm high birch plywood, "Crash Blocker", lower interior approx. 140 mm high with steel impact protection, stake storage 80 x 80 mm on front wall inside. Painting / Coating Frame: Hot-dip galvanised including passivation or painted as per customer. Landing gear: Black coated Front corner posts: galvanised and painted in bulkhead colour. Bulkhead: natural aluminium or painted as per customer

Durum: ikinci el, Üretim yılı: 2021, Sinterit Multi PHS + sandblaster – accessories as shown in the photos, 2021 The Sinterit Multi PHS (Powder Handling Station) with sandblaster is a professional post-processing solution designed for SLS 3D printing applications. It enables efficient workflows for powder removal, material handling, and part cleaning, contributing to improved cleanliness and convenience during post-processing. The offer includes the Sinterit Multi PHS, sandblaster, and accessories as visible in the photos. Year of manufacture: 2021. Key features: - Professional powder handling and post-processing station dedicated for SLS printing - Supports powder cleaning, sieving, and part finishing processes - Includes a sandblaster for cleaning and surface finishing - Accessories included, as shown in the photos - Industrial-grade construction, suitable for professional use The set includes: - Sinterit Multi PHS - Sandblaster - Accessories as shown in the photos Vacuum cleaner not included in the offer Lsdjywurvopfx Aiishh

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 4.840 kg, azami yük ağırlığı: 21.160 kg, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 12.050 mm, yükleme alanı genişliği: 2.550 mm, toplam uzunluk: 12.200 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5", Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customised to the customer's specifications. Chassis, Semi-Trailer Logistics Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin, reinforced mounting point for "gallows" attachment with robust wear plates all around. Mounting bar at rear for aluminium ramps. Outer frame in new, slightly angled design with "Load-Lock profile" for attaching lashing straps. "Patented Load-Lock-Cross" for lashing straps, in the cross member under the outer frame. 24-tonne, 2-speed landing gear, single-sided operation, with straight lower part, without thrust compensation, free landing gear corner dimension or free rear swing radius approx. 1920 mm, without support legs. 2 wheel chocks with holders, aluminium side underrun protection, steel rear underrun guard, quarter shell mudguards in front of and behind each axle, without impact guard. Spare wheel carrier for 1 spare wheel, including wheel mounting kit, spare wheel, manufacturer same as main tyres, steel rim. Plastic toolbox, with shelf, w=620/h=360/d=440 mm, lockable with padlock. Axles + Suspension Drum brake axles, "axle/chassis laser alignment" to reduce tyre wear and fuel consumption. No steering, air suspension, without lift axle. Brake System 2-line air brake system. Colour-coded line routing for easy service. Spring-actuated parking brake. 2 non-interchangeable coupling heads at the front, no connecting line. EBS - Electronic Braking System with EBS socket at the front, without connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise & lower valve, vehicle stability control system. Wheels and Tyres 205/65 R17.5 manufacturer at the discretion for 8-ton axle load at 80 km/h, steel rims, factory silver finish. Electrics 24 volt, multi-chamber rear lights, yellow LED side marker lights, 2 white position lights at the front, 2 white/red lane marker lights at the rear, 1 x 15-pin socket at the front, without connection cable, LED working light in the neck (switched via reversing light), if technically possible, additional LED working light at the rear, switched via reversing light. Floor Lhedpfx Ajzb Ikfsiish Anti-slip phenolic plywood, approx. 30 mm thick, designed for high point loads, suitable for forklift axle loads up to max. 5600 kg. Front wall / Front Corner Posts 25 mm aluminium hollow profile, 1,350 mm high, corner posts steel in high-volume design. Customised Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customised to the customer's specifications.

Üretim yılı: 2025, durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, This is a glasswasher by the manufacturer Hobart, model GXCROI-10C, year of construction 2025. This compact professional dishwasher features an integrated reverse osmosis system and an undercounter base for empty racks or detergents, including suction lances for fill level monitoring. The glasswasher has been serviced in our in-house workshop and is fully functional, in almost as-new condition. The RRP for this machine in this configuration is €13,285.16 gross. You will receive an invoice with VAT shown separately. Our used equipment service for you: - 6-month warranty on all electrical components, limited to defective part replacement, excluding labor for removal and installation - High-quality brand equipment at fair prices - Professional servicing / inspection & expert cleaning - Tested & fully functional – or your money back - Flexible shipping or self-collection options - Expert advice – before and after purchase - Provision of operating manuals, wiring diagrams & spare parts - DGUV V3 electrical safety inspection Technical data: External dimensions (WxDxH): 600 x 600 x 1260 mm Electrical connection: 400V / 50 Hz, 6.8 kW Year: 2025 Cycle times: 60/90/120 sec. and special programs Water consumption: 2L/rack Tank capacity: 60 liters Rack size: 500 x 500 mm Loading height: 305 mm Condition: Used, serviced and fully functional Base model features: - Front-loading machine - Theoretical output up to 60 racks/hour, 2,160 glasses/hour - 7 automatic programs: short, standard, cold rinse, hygiene, basic cleaning, intensive program, E-save - Automatic self-cleaning program - Wash pump with soft start - Integrated Wi-Fi module - Completely ready for connection: inlet and drain hoses, mains cable (400 V connection), liquid detergent dosing pump, rinse aid dosing pump, rinse booster pump, drain pump, backflow preventer - Multi-phasing: machine can be converted on site from 400 V to 230 V Ledoy Uvuaspfx Aiiohh - Shock-absorbed door with pull-in mechanism - Tank, frame, and housing made of CrNi steel 1.4301 - Universal glass rack 00-378814-000: 500 x 530 mm - With base: 435 mm high, removable door, CrNi steel 18/9, space for 2 empty racks or detergent Customer benefits: - Compact design, installation height of only 705 mm / with integrated osmosis only 820 mm - Self-cleaning wash system - VISOTRONIC-TOUCH control - SmartConnect app - SENSO-ACTIVE resource management - CLIP-IN wash and rinse system - Intelligent data storage - USB interface - GENIUS-X2 fine filter system - Cold rinse - Intensive program - Sieve insert control - Optional fill level indicator - Hygiene program in combination with the INTENSIV hygiene tab Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by prior arrangement Subject to change and errors. Do you have questions, need advice or want to view on site? You can reach us by phone during opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively on the basis of our general terms and conditions (GTC).

Durum: ikinci el, güç: 38 kW (51,67 bg), ilk tescil: 12/2009, yakıt türü: dizel, vites türü: otomatik, Donanım: klima, 38 km/h version, 2-speed gearbox for improved driving performance, 38 kW 4-cylinder Perkins 404D-22 engine, 38 kW (51 hp) at 3000 rpm (97/68/EC Stage IIIA). Permanent hydrostatic 4×4 drive, 65-liter diesel tank. Permissible total weight 3500 kg, therefore fully road legal. Air conditioning with heating and ventilation system. 2 front work lights. Speed control via drive pedal. 3-circuit hydraulic system. Front linkage with quick-change plate. Mechanical implement relief. Quick-shift system for attachments for summer and winter operation. Hydraulic and electrical pre-installation for optional equipment packages. High-pressure valves (360 bar) – only on BB201D. Hydrostatic deceleration with brake light function (pressure switch). 4 lashing eyes. Quick-change suction nozzle. König comfort seat with integrated 3-point seatbelt. Heated rear-view mirrors. Integrated reversing camera with 7" color display – infrared night vision, viewing angle approx. 135°. Suction mouth camera (only in combination with reversing camera). Container with cleaning hatches & water level indicator. Lodpfx Aotzt E Hoiiehh Sweeping unit with 2 trailing front brushes, 900 mm. Sweeping width: 1190 mm – 2400 mm. Hydraulic coarse dirt flap. Infinitely adjustable brush speed 0–150 rpm. Dust reduction via spray nozzles on each disc brush. Automatic collision protection (for sweeping and pick-up). With hydraulic tilt adjustment of the right-hand brush. Debris container with suction fan. Container in stainless steel optic. High dump 1600 mm. 250-liter fresh water tank. 300-liter recycled water tank. Suitable for both sweeping and grass collection. Multi-purpose separation sieve for efficient dirt and grass separation. 4 spray nozzles in the suction system to reduce (fine) dust emissions. Quick-change system. Debris container impact plate.

Durum: ikinci el, Üretim yılı: 2004, Ekran değiştirici EREMA SW8/134 RTF Ağır derecede kirlenmiş polimerler için 4 taşıyıcı pistonlu (8 elek) sürekli kısmi yüzeyli geri yıkama filtresi Eleklerin geri yıkanması veya değiştirilmesi sırasında en küçük basınç farklılıkları Eriyik filtre sistemi, ince filtrelemeye yönelik en yüksek talepleri karşılar ve sağlamlık, yüksek derecede otomasyon ve maksimum kullanılabilirliğin yanı sıra eriyiğin homojenizasyonunda iyileşme ile karakterize edilir. Ana malzemeler: 1x Sürekli 4 pistonlu geri yıkama filtresi 1x kontrol izleme ünitesi Filtre değişimi için 1 adet kontrol ünitesi 1x hidrolik ünite Sistem özellikleri: - Elek çapı Ø 134mm - Aktif tarama alanı 1128cm² - üretimi kesintiye uğratmadan tam otomatik durulama işlemleri - Teknik belgeler - Yapım yılı 2004 Ön satışa tabidir Lütfen sorularınızı yalnızca e-postayla gönderin Bir bildirim: Makine halen kurulu durumdadır ve yerinde görülebilir. Ljdsualalopfx Aiiehh Alıcı bunu kendisi çıkarmalı ve nakliyeyi organize etmelidir. Bu teklif fiyatının bir parçası değildir.

Durum: mükemmel (kullanılmış), SLM Solutions SLM 500 HL Metalik parçaların seçici lazerle ergitilmesi yoluyla katmanlı üretimi için profesyonel sistem. Endüstriyel uygulamalar, prototipleme, kalıp yapımı, havacılık ve uzay sanayi, medikal teknoloji ve seri üretim için uygundur. Teknik Özellikler Üretici: SLM Solutions Model: SLM 500 HL Üretim yılı: 2015 İnşa hacmi: 500 x 280 x 365 mm Lazer konfigürasyonu: Dörtlü fiber lazer 4 x 400 W Maksimum üretim hızı: 105 cm³/saat'e kadar Katman kalınlığı: 20 µm ila 75 µm Minimum özellik boyutu: 150 µm Lazer odak çapı: 80 - 115 µm Maksimum tarama hızı: 10 m/s Besleme gerilimi: 400 V / 50 Hz, 3/N/PE Kontrol gerilimi: 24 V DC Nominal akım: 36 A Isıtma gücü: 2,4 kW Koruma sınıfı: IP50 Basınçlı hava ihtiyacı: 6 bar'da 50 l/dak Özel Özellikler Patentli çoklu lazer teknolojisi Otomatik toz yönetimi PSX eleme istasyonu PRS boşaltma istasyonu Lazer sınıfı 1 CE işareti mevcut Servis / Kullanım Geçmişi Sistem başından beri sadece alüminyum işlemek için kullanılmış olup, azot atmosferinde çalıştırılmıştır. İşletimi, devre dışı bırakılana kadar sorunsuzca devam etmiştir. Son bakım sırasında oksijen sensörleri ve ilgili değerlendirme ünitesi güncellenmiştir. Sistem, ardından profesyonelce devre dışı bırakılmıştır. Soğutma Ünitesi Üretici: Riedel Model: WKS 101.2M5LE.I Ledpfx Aijza Ethoishh Üretim yılı: 2016 Soğutucu gaz: R134a Dolum miktarı: 3,0 kg Çalışma basıncı yüksek taraf (HD): 18,7 bar Koruma sınıfı: IP54 Teslimat Kapsamı (İrsaliye göre) SLM 500 HL Lazer Ergitme Sistemi, yaklaşık 2680 kg Riedel Soğutma Ünitesi WKS101.2M5LE.I, yaklaşık 200 kg SLM Filtrasyon Sistemi, yaklaşık 150 kg SLM Boşaltma İstasyonu PRS 500, yaklaşık 855 kg SLM Eleme Tesisi PSX 500, yaklaşık 690 kg Logitrans Kaldırıcı LFSM 1002/1620, 2015 üretim yılı, yaklaşık 550 kg 2 x SLM Yapı Silindiri, her biri yaklaşık 205 kg SLM Yedek Parçaları / Borulama Boyutlar / Ağırlık Üreticiye göre tam sistem: Yaklaşık 5200 x 2800 x 2700 mm Üreticiye göre ağırlık: Yaklaşık 3100 kg çalışmaya hazır Yaklaşık 2400 kg toz hariç Durum Endüstriyel kullanımdan çıkmış, ikinci el makine. Sistem sökülmüş ve depolanmıştır. Görsel durumu fotoğraflara uygun. Teslimat kapsamı fotoğraflarda görüldüğü gibidir. Yerinde inceleme ve test, önceden anlaşmak kaydıyla mümkündür ve özellikle önerilir. Önemli Not: Tüm bilgiler mevcut belgeler, yazılım ekranları, üretici verileri, irsaliye ve tip etiketlerine dayanarak en iyi bilgiye göre verilmiştir. Teknik verilerde farklılıklar olabilir. Nakliye veya lojistik firması ile gönderim mümkündür. Her türlü değişiklik, hata ve ara satış hakkı saklıdır. Ek sorularınızı memnuniyetle telefonda cevaplayabiliriz.

Durum: incelemesiz (kullanılmış), Üretim yılı: 2011, Length: 5,000 mm Width: 100 mm Height: 2,800 mm Year of manufacture: 2011 Range+Heine Paint Finishing System For coating individual wooden window components and frames For sale by customer order ----- Technical manufacturer's description: Part dimensions: Length: 5,000 mm Height: 2,800 mm Width: max. 100 mm Paint system: Designed for use with materials from the respective paint manufacturer, featuring a low solvent content (VOC value), water-based, and non-flammable. Capacity: Min. 40 transport bars per shift, i.e. approx. 60 window units per shift (without forced drying) Process (1 cycle runs twice): - Flooding - Drying - Control / applying joint sealant - Spraying - Drying ----- Pos 1 Conveyor Technology Lodey Ty E Hepfx Aiishh 1 Power + Free Circular Conveyor Course according to drawing 11-138-010a Main components: 3 drives with gear motors for the main chains with frequency-controlled speed (see layout) Various running rails, horizontal bends, chain tensioning stations, pneumatically/electrically controlled stop stations 50 transport bars, 5,000 mm long (max. weight 250 kg) Automatic tilt of the bars in the drip-off area after the flooding unit 1 conveyor system control (Siemens S7-300 PLC) Programmable buffer stocks Continuously variable drive control 1 lifting/lowering station for loading/unloading the workpieces (max. stroke 2,000 mm) 1 set of steel construction for fastening the conveyor technology ----- Pos 2 Flooding Unit 1 flowcomat II-P 1 plant for colorless priming Maximum workpiece width approx. 180 mm Consists of: 1 coating tunnel, 1 Flowcodrive - swivel mechanism, 2 flooding lances, each equipped with max. 3 nozzles. 1 accessories set for cleaning the unit 1 external stainless steel sieve 1 paint supply 1 control unit ----- Pos 3 Extensions for the Flooding Unit 1 drip channel and surface in the evaporation area after the flooding unit After flooding, the transport bars enter a drip buffer. The dripping coating material is returned to the flooding unit via a PP (non-stick) collection surface (and collection channel). Rinse water is collected and pumped out. The PP design of the paint-contact surfaces allows for easy cleaning of dried paint. 1 humidification system 1 control unit for the humidification component Complete with regulator for the humidification quantity 1 hygrostat for detecting room humidity and activating the humidification nozzles 3 humidification nozzles for the drip buffer 1 coagulation unit 1 R+H waco 200 coagulation unit – 200 l collection tank ----- Pos 4 Topcoat Spray Booths 2 spray booths for topcoat application 2 exhaust walls with sandwich panel cladding in accordance with the working area specification Fan: 16,000 m³/h Filter area: - 3 sets of Ecola pre-separators - 1 set of Paintstop filters - 1 set of pocket filters Recirculation ceiling with clamping frame design Volume 12,000 m³/h approx. 75% recirculated air – 25% exhaust air operation (exhaust air is drawn from the hall) Installed on on-site foundations according to layout 2 Prolac overspray recovery columns ----- Pos 5 Additions to the Topcoat Spray Booths 3 humidification nozzles for the evaporation area following the topcoat application ----...

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT34002026856, boş ağırlık: 5.592 kg, azami yük ağırlığı: 29.408 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2020, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", renk: beyaz, The images are archive photos! The vehicle may currently be in use! Chassis semi-trailer for forwarding companies Fine-grain steel welded construction in reinforced Scandic design, fifth wheel plate with interchangeable 2" kingpin Outer frame slightly angled with "Load-Lock profile" for attachment of lashing straps Lashing rings for use in the "Load-Lock profile", each rated at 6 t, loose 24 t 2-speed landing gear, one-sided operation, with straight base, without compensation Free swing radius to landing leg approx. 2200 mm, landing leg dimensions approx. 2350 mm 2 wheel chocks with holder Lsdjx Rq Slspfx Aiijhh Side underrun protection made of aluminium Rear underrun protection made of galvanized steel Quarter-shell mudguards before and after axle assembly with anti-spray mudflaps only on the last axle 1 plastic toolbox, with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (lock not included) 1 pair of stanchion pockets integrated into the outer frame/floor right at the front, 83 x 83 mm internal dimensions 2 plug-in stanchions W=80/ D=80/ L=1200 mm, hot-dip galvanized Notice: Stanchion pockets/plug-in stanchions are not designed to solely secure long materials, pipes, etc. without lashing around cargo 4 pairs of ferry lashing rings, marked yellow Axles & Suspension 3x BPW drum brake axles "Axles/chassis laser measured" to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 reverse polarity-proof coupling heads at front, no interconnecting pipe EBS by Wabco Premium, electronic braking system with EBS socket at the front, no connection cable, Wabco Premium incl. open CAN BUS for telematics Attention: The trailer may only be towed by towing vehicles which guarantee the effectiveness of ABS! with Raise & Lower valve Vehicle stability system Electrics 24 Volt, multi-chamber LED lights with resistors, yellow LED side marker lights, license plate lighting in LED (Note! With certain towing vehicles, diagnostic errors may occur, even if functionality is assured) 2 white position lights at the front 2 white/red boundary marker lights at the rear 2 x 7-pin reverse polarity-proof sockets at the front, no connection cable Front bulkhead / front corner posts 2 steel corner posts, 580 mm high, volume version, release device for side curtain at front bulkhead "Crash-blocker", inner lower steel impact guard at about 140 mm height Plug-in slats Rows of wooden plug-in slats Tarpaulin Tarpaulin with welded horizontal and vertical straps Tension locks made of stainless steel Floor Birch plywood approx. 30 mm thick, fitted on longitudinal crossmembers for high point load capacity, forklift axle load up to max. 7100 kg Note: Floor warping due to weather exposure possible (no warranty)! Rear wall / rear corner posts Rear corner posts up to underside of roof, provision for curtain mounting with round tube and curtain tension ratchet Swing doors at the rear, double wing, each with 2 internal locking rods Roof Sliding roof, rear high-lift end flap, sliding from rear to front, tarpaulin color: white Optimal rain gutter at the rear, at the end bow above the doors Registration country / plates Germany Approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, sides white and rear red

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902017848, boş ağırlık: 6.537 kg, azami yük ağırlığı: 28.463 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2015, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.790 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", renk: gümüş, The images are archive photos! The vehicle may currently be in use! Fine-grain steel welded construction in lightweight design, fifth wheel coupling with replaceable 2" kingpin, outer frame slightly sloped with load-lock profile for attaching lashing straps. Note: To attach straps in combination with side walls, the side walls must be opened. 24-ton, two-speed landing gear, single-sided operation, straight lower section, without compensating slide, lateral door retainers, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support foot corner dimension or free rear swing radius approx. 1930 mm, quarter-circle mudguards in front of and behind axle assembly, with anti-spray mudflaps only on the last axle, rear underrun protection, pallet stops on both sides approx. 20–25 mm high, bolted design, loading height is reduced by approx. 20–25 mm. Lodpfx Aiskyrmisiohh BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation 3x brakes (traction assist up to max. 25 km/h). Floor: phenolic plywood, approx. 30 mm thick, cross joints with omega insert, laid on longitudinal beams for high point load resistance, suitable for forklift axle load up to max. 7100 kg. Front wall/corner posts: 2,480 mm high, steel corner posts in high-volume design, release mechanism for side curtain at front wall, lower inside section at approx. 140 mm height with steel underrun protection. Roof: sliding roof, rear Endlift foldable, tarpaulin can be slid from rear to front, L-roof beam for automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin color: white, hydraulic lifting roof with hand pump at each corner post, liftable by 400 mm. Roof can be driven when raised, adjustable upward by 4 x 50 mm. Total height must be considered! Incl. tarpaulin extension by 200 mm, only in combination with tarpaulin.

Durum: ikinci el, AZO FLF650 sıvı ayırıcı santrifüjlü sıvı elek Lhodpfxswyfxxo Aiioh Motor gücü 1.5kW 853rpm Hariç. elek sepeti Açı ayarlanabilir Diğer reklamlarımıza bakın VMA Haftası

Durum: yeni gibi (sergi parçası), Üretim yılı: 2024, Özel fiyat: €29,970 net Bir makine şu anda hemen kullanıma hazır olacaktır. Hacimli, hafif alüminyum talaşlarını veya talaşlarını parçalamak için ideal makine. Masif alüminyum parçalar için uygun değildir. İçermek: Lhjdogmh H Tjpfx Aiish + Optimize edilmiş kesme geometrisi + Uyarlanmış kaydırıcı kontrolü + Yüke bağlı kontrollü hidrolik kızak (talaşları kesme ünitesine doğru bastırır) Motor: 18,5 kW; 400V - 50Hz - 3ph, Bıçak: 40x40mm, birkaç kez döndürülebilir, Rotor çapı: 260 mm, Kontrol: Omron PLC, Kesme mekanizması açıklığı 600 x 800 mm, Huni hacmi yaklaşık 0,6 qbm, hidrolik olarak çalıştırılan kaydırıcı Seçtiğiniz ekran perforasyonu (15 - 40mm) Emme ağzı Ø 160 mm Ağırlık yaklaşık 1.300 kg Boyutlar (uxgxy) yaklaşık 1737 x 1167 x 1650 mm Aşağıdaki seçenekler ek ücrete tabidir: - Parçalayıcıyı 30 cm yükseltin (taşıma bandı hazırlığı) + net 2.990 € - Açılı konveyör bandı (boşaltma yüksekliği yaklaşık 220 cm) +9.770 € net - Bant üstü mıknatıs + net 6.980 € - Konveyör bant kontrolü ve bant üstü mıknatısı + net 2.750 € (Bilgisayar korsanıyla eşzamanlı olarak başlat ve durdur) Malzemenizle birlikte ücretsiz bir test yapmaktan mutluluk duyarız. Sizi Neckartailfingen'e davet ediyoruz. Malzemenizi bize kargo ile göndermeniz de mümkündür; testi resim ve videolarla belgeleyeceğiz.

Durum: yeni, Üretim yılı: 2026, Comprising Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency inverter (FU) – regulates the speed of the scraper floor. Bales are placed onto the scraper floor and the feed to the milling rotor is engaged. The rotor tines tear straw from the bale and propel it into the hopper. The combination of bale breaker and straw shredder is ideal for this process. Technical specifications – Bale Breaker: Processing: 1–2 bales per hour up to max. 600 kg per hour (depending on screen size and power rating of the straw mill. Without a straw mill, bale breaker processes up to 900 kg/h of straw). Max. bale size (square): 2400 x 1200 x 800 mm (LxWxH) Milling rotor motor: 5.5 kW, 380 Volt Scraper floor drive: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (LxWxH) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Upgrade to larger straw shredder (18.5 kW): +€2,750 net Technical specifications, MHZ with special hopper: Motor: 15 kW, 380 V electric motor Diameter: 600 mm Hardened cutting blades Sieve with interchangeable inserts Selectable mesh sizes: (10, 12, 15), 22, 30, 45 mm With star-delta switch, overload protection, and 8m ready-to-connect cable Discharge nozzle diameter: 160 mm Blow distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (LxWxH) Weight: approx. 240 kg --- Options for additional charge: Feed auger: +€970 net Cyclone (suspension to be provided by customer), should be max. 10 m away +€2,970 net Basic filter: €1,750 net --- Further options: Industrial extraction system (demonstrator): from €9,950 net Optional rotary valve (for pressure-free material discharge): +€5,750 net Control panel: from €1,620 net Special bale breaker extension 3 m (other dimensions on request): +€9,750 net Briquetting press MPP 180 S; lightly used demo model 70 mm briquette – up to 100 kg/h from €39,700 net * Larger machines on request --- Description: muetek Bale Breaker is designed for breaking up round and square bales of hay and straw. The shredder mounted to the bale breaker processes straw from all cereals, hay, maize, and miscanthus. The muetek MHZ/MHB series machines stand out due to their robust construction and heavy-duty design. muetek Bale Breakers of the MHB series are equipped with a chain conveyor, onto which the straw bale is placed using a front loader. The support is adjustable according to bale type. The chain conveyor pushes the bale against the milling rotor; feed speed is adjustable. The milling rotor is fitted with multiple teeth to break up the bale. The separated straw is then discharged. --- The machines are generally suitable for dry starting materials: - Straw - Hay --- Processing hemp bales is only possible with a special breaker: Ledpfx Asb Nulheiiohh Surcharge approx. €9,720 net (depending on design). Hemp cannot be shredded by the straw mill. Requirements for input material: Moisture content max. 12%

Durum: yeni gibi (sergi parçası), Üretim yılı: 2023, Polistiren veya benzeri malzemeleri parçalamak için idealdir Verim büyük ölçüde elek ve başlangıç malzemesine bağlıdır: - 15 mm elek ile EPS için 60 kg/saat'e kadar *Elek ne kadar kaba olursa, verim o kadar yüksek olur Motor 9.2 / 11 KW - 400 Volt, istikrarlı çelik konstrüksiyon, sertleştirilmiş kesme bıçakları, Değiştirilebilir eklere sahip elek, isteğe bağlı olarak (8), (10), 15, 22, 26, 30, 40 veya 60 mm delik Elektrikli tahrik için yıldız-üçgen anahtarlı Ue korumalı ve fişe takılmaya hazır 8 m besleme kablosu, çıkış memesi 150 mm, isteğe bağlı olarak plastik veya tahıl borular için, Üfleme aralığı yaklaşık 12 m, 2 tekerlekli Ø 380 mm şasi, ve Ø 125 mm döner destek tekerleği, tüm tekerlekler katı kauçuk lastiklerle, Boyutlar yaklaşık 1200 x 900 x 1270/1400 mm UxGxY Lsdpoh S H T Uefx Aiijhh Ağırlık yaklaşık 240 KG, Yedek parça fiyatları ve seçenekleri: 24 adet sertleştirilmiş bıçak, her biri 9,90 € net 6 cıvata her biri 14,90 € net 1 elek her biri 475 € net Kapak her biri 290 € net

Durum: yeni gibi (sergi parçası), Üretim yılı: 2025, Machine with Special Rotor Available immediately Advantages: + Special rotor with reduced blade projection + 22 kW motor + Efficient square blades *For pallets: up to 10 pallets per hour *Output depends on screen and material. Significantly higher throughput with smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 ph, Screen: 15/20 mm Hydraulically operated pusher Lodpodv Eu Hefx Aiiehh Current screen perforation (15/20 mm) *can be changed Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Colour of the unit may vary Weight: 1920 kg Standard scope of delivery: - Control cabinet with PLC control - Automatic star/delta start - Fast hydraulics - Automatic shut-off in case of rotor idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *Shown in the last 2 images. - Additional knife row + €2,790 - Segmented floor + €6,890 (recommended for materials with wall thicknesses less than 3 mm) - Special K-rotor bearing + €3,480 (May be advisable for shredding plastics with screens smaller than 15 mm or high fine content. If bearings are greased about every 4 weeks of operation, this option is not necessary.) - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €5,980 net - Control unit for conveyor belt and overbelt magnet + €2,750 net (Start and stop synchronized with the shredder) - Enlarged attachment hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Material feed must be free from metals and mineral contaminants. Damage to tools and/or increased wear may result otherwise.

Üretim yılı: 2024, durum: yeni, Genel bakış - farklı varyantların *Her pozisyon gerekli değildir: Opsiyonel: Lhjdeff Sbispfx Aiioh -Balya öğütücü MHB net 24.990 €'dan itibaren -MHZ saman değirmeni net 7.980 €'dan başlayan fiyatlarla -Özel hazne 970 € net -Cyclone net 3.750 €'dan başlayan fiyatlarla -Deşarjlı sac silo göstericisi (sadece resimde çizilmiştir) *Tekerlekli yükleyici ile yükleme yapmak istiyorsanız opsiyonel Net birim fiyatı 14.750 €'dan başlayan fiyatlarla - Demonstrator -Toz alma burgusu - uzunluk yaklaşık 4 m Alt tarafa 4 elek monte edilmiştir ve bunlar çıkarılır. Birim fiyatı net: 9.750 € - Ekstraksiyon parçaları / hortumlar sabit fiyat 945 € net - Tüm sistem için kontrol ünitesi Net birim fiyatı: 2,750 € -Gösterici ekstraksiyon ünitesi MMJET 160 Gösterici, temizlemeli Bağlantı 160, Fan 2,2kw hava kapasitesi 1850m³ /400 V Otomatik basınçlı hava temizleme Birim fiyatı net: 6.950 € -Baler B 400 Balyalar yaklaşık 400x400x800 (yükseklik ayarlanabilir) Saatte + - 20 kg ile 30 balyaya kadar net 59.995 €'dan başlayan fiyatlarla *Bir referans sistemi (balya makinesi) posta kodu: 64579 Gernsheim'da bulunmaktadır Teknik veriler: Balya boyutu (GxDxY): 400 x 400 x 800 (yükseklik istek üzerine ayarlanabilir) Balya ağırlığı +/- 20 KG (malzemeye bağlı olarak) Kapasite: saatte yaklaşık 30 balya Depolama konteyneri yaklaşık 0,7 m³ kapasite Konteynerdeki min./maks. dolum seviyesi için dolum seviyesi sensörleri Hidrolik ön kompresör Hidrolik pres koçu Hidrolik ünite, yağ tanklı valf bloğu Pompa 18,5 KW / 50 litre Kolay balya itme için balya haznesindeki silindirler Boyutlar (l x w x h) 3105x2830x2455 mm Ağırlık yaklaşık 1500 KG mütek balyalama presleri̇ / paketleme maki̇neleri̇ çok çeşi̇tli̇ malzemelerden balya üreti̇mi̇ i̇çi̇n tasarlanmiştir kıyılmış micanthus veya fil otu, odun talaşı, talaş ve kıyılmış saman gibi malzemeler. saman. Makine, tutarlılığı garanti eden sağlam yapısı ile karakterize edilir sürekli çalışmada kalite. Balya makinesi, depolama kabına doldurulan malzemeyi bağlayıcı maddeler eklemeden sıkıştırır Bağlayıcı maddeler eklenmeden ve malzemeyi plastik torbalara paketleyerek. Malzemenin hacmi şu şekilde olabilir balya makinesi ile önemli ölçüde azaltılabilir. Hacim azaltma oranı malzemeye bağlıdır. Bu Maksimum malzeme nem içeriği %18 Atro'yu geçmemelidir. Mütek balyalama presinin haznesi otomatik veya manuel olarak beslenebilir ve yaklaşık 0,7 m³ hacme sahiptir. hacmi yaklaşık 0,7 m³'tür. Daha büyük hacimli veya ekli bir emiş ve filtre sistemine sahip konteynerler komple bir imha ünitesi olarak da mevcuttur. Otomatik doluma ek olarak mütek ayrıca vidalı konveyörler aracılığıyla dolum imkanı da sunmaktadır. Her iki varyantta da otomatik otomatik tozsuzlaştırma mümkündür. mütek balyalama presleri kontrol sistemi için bir kontrol kabini ile donatılmıştır. Standart versiyonda balyaların boyutları (genişlik x derinlik x yükseklik) 400 x 400 x 800 mm. Bununla birlikte, yükseklik talep üzerine gereksinimlerinize göre uyarlanabilir. Balya üretiminde aşağıdaki avantajlar ortaya çıkmaktadır: - basit ve güvenli depolama - Gevşek toz yok - Depolama hacminin en aza indirilmesi - Düşük taşıma hacmi *Kaynak malzeme için gereklilikler: - kuru (maks. %30 ATRO) - Maksimum uzunluk 35 mm

Üretim yılı: 2025, durum: yeni, Granulator MVZ 7.5 kW Demonstration machine available at special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic components or for secondary size reduction of wood chips. More details available after a test run with your material. Our granulators are used for processing a wide variety of materials such as plastics or wood. Shredders and granulators are suitable for a broad range of size reduction tasks. For example, injection moulding machines often produce reject parts and sprues that need to be reprocessed. At blow moulding machines, besides rejects, there are also waste pieces and start-up purges. Suitable for processing various blow-moulded materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes. Material is fed from above through a hopper into the granulator’s grinding chamber. The internal rotor is equipped with cutting knives. Material is cut between the rotating knives and the stationary knives inside the grinding chamber, until it has been reduced to the desired regrind size and falls through the screen located beneath the rotor. *Optional: the ground material is then typically transported pneumatically into big bags, silos, or other containers. The price applies to the shredding plant as shown in picture 1 – fan, cyclone, and filter are optional extras. --- Technical data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger plants available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *depending strongly on screen and material Application example: Shredding PE 1000 plastic Feed material: approx. 40 mm chip length Secondary size reduction to approx. 6 mm Throughput up to 50 kg/h with 6 mm screen (Throughput up to 80 kg/h with 8 mm screen) ___ Significantly higher throughput rates can be achieved when re-shredding G30 wood chips. Up to max. 400 kg/h with a 10 mm screen. *metered feed, e.g. via conveyor belt or auger Details after testing with approx. 30 kg sample. Rotor diameter: 180 mm 6 rotor knives, each 225 mm long 4 stator knives, each 225 mm long Dimensions: 930 x 730 x 1420 mm Weight: 450 kg Suction nozzle: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm – other sizes available on request, Price per screen: €390 Lheded N Dn Dopfx Aiijh Replacement knife set: €679 Suitable for, for example: - All types of plastic waste Various materials – HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs and more. Parts from injection moulding, blow moulding, injection moulding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger systems also available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Opening: 620 x 400 mm *optional with matching suction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Opening: 620 x 500 mm *optional with matching suction/transport system --- For correct machine configuration, the following details are important: - Length x width x height of input material? - Screen size, to which size (mm) should it be reduced? - Required hourly throughput in kg? - Wall thickness in mm? - Material description Photos are also helpful

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33901014232, boş ağırlık: 5.900 kg, azami yük ağırlığı: 29.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı yüksekliği: 900 mm, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.638 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5", renk: gümüş, The images shown are archive photos! The vehicle may currently be in use! Chassis: Semi-Trailer for Haulage Fine-grain steel welded construction, fifth wheel plate with interchangeable 2'' kingpin Drive-over and loadable with construction/agricultural machinery up to a maximum gross weight of 24,000 kg and up to a maximum machine width of 2,480 mm (the track width of machines or vehicles to be transported must not exceed 2,200 mm); hook-in bar for aluminium ramps at the rear (wider construction/agricultural machinery must not be loaded) Outer frame slightly angled, new design with "Load-Lock profile" for lashing strap attachment 14 pairs of lashing eyes additionally recessed into the outer frame, each rated at 2.5 t 6 pairs of lashing eyes recessed into the outer frame, each rated at 5 t 24 t, 2-speed landing gear, operated from one side, with straight base, without force equalizer Clear support foot dimension or free swing radius to the rear approx. 1920 mm Folding rear support 2x wheel chocks with holders Aluminium side underrun protection Steel rear underrun guard Quarter shell mudguards in front of and behind each axle With anti-spray mudflaps behind each axle 1x spare wheel holder for 1 spare wheel, incl. wheel fixing kit Lsdpfx Aiexb D Swoiehh 1x spare wheel, same make as main tire set, steel rim Axles and Suspension SAF drum brake axles "Axle/chassis laser aligned" reduces tire wear and fuel consumption Air suspension 1st axle is a self-lifting axle, also operated electrically from the truck, incl. forced lowering and start assist, without truck installation (start assist operational up to axle load limit of 30% and up to a speed of 25 km/h max.) Brake System 2-line compressed air braking system Color-coded routing for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line 24 Volt EBS (Electronic Braking System) with EBS socket at the front, no connection cable Note: This trailer must only be towed by vehicles that ensure the effectiveness of ABS! With lift & lower valve Vehicle - Driving Stability System "TPMS" Tire Pressure Monitoring System as per ECE R 141, display in the towing vehicle via the EBS, without truck installation (requirement must be met in the truck, only fits main tire set) Wheels and Tires 235/75 R17.5 twin tires Steel rims, factory silver Electrics 24 Volts, multi-chamber tail lights, LED side marker lights (yellow) LED yellow side marker lights synchronized with turn signals (flashing side markers) 2 white position marker LEDs at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof sockets at the front, no connection cable Floor Approx. 30 mm phenolic resin plywood, for high point loads, rated for forklift axle loads up to max. 5,600 kg Front wall / Corner posts 25 mm aluminium hollow profile, 1,350 mm high, corner posts in high-volume steel version Front wall additionally lined on the inside with 1,250 mm high phenolic resin plywood Chassis hot-dip galvanized The images shown are archive photos! The vehicle may currently be in use!

Durum: ikinci el, Üretim yılı: 2017, çalışma saatleri: 8.340 h, Beautiful machine - Well equipped - Not worn out - No oil leaks! Fin: VATZ1265CZB044737 Year of manufacture: 2017 Original operating hours: 8,350 hours Liebherr serviced Special factory paint finish RAL 1027 curry yellow 4-cylinder inline engine, water-cooled with turbocharger, 103 HP Hydrostatic drive with 2 speed ranges, max. 32 km/h * Standard Z-lift arm * Ride control / boom suspension * Hydraulic quick coupler with mounting kit * Central lubrication system ex works Liebherr * 3rd hydraulic circuit for high-tip, grab, or 4-in-1 bucket * Steel lamp holder instead of plastic * Rear tow coupling * "Comfort" driver's seat with suspension * Radio Comfort * 2 rear LED work lights on cab roof * 2 front LED work lights on cab roof * Adjustable steering column * Rotating beacon / warning light, center top of cab * Crane / lashing eyes rear and front frame * Fire extinguisher * Road registration, 32 km/h Tyres: 17.5 x 25 L3 front axle, 2 pcs, 95% as new * Tyres: 17.5 x 25 L3 rear axle, 2 pcs, 95% as new Permissible total weight approx. 10,500 kg, operating weight approx. 8,500 kg Offer includes hydraulic quick coupler and standard 1.6 m³ bucket – price €46,900 net for export / within Germany plus 19% VAT Additional equipment available at extra cost: · Clamshell bucket 2 cubic meters from €3,550 Ljdpfxsyqn Hle Aiishh · High-tip bucket · Sieve or mixer bucket (manufacturer: Wolf) · Pallet fork 5 tons from €2,190 Prices are net plus VAT or for export Sale only to commercial customers or for export. Sale as-is, as seen. No warranty or guarantee. Mileage or operating hours according to the meter; we do not guarantee accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer and details provided are not to be regarded as guaranteed features. The description and details are for general vehicle identification only and do not constitute a warranty within the meaning of commercial law. No claim to completeness. Information/descriptions and images are non-binding and do not serve as guaranteed characteristics. Only the terms specified in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment must be checked separately if necessary. We are happy to accept your vehicle in part exchange. For further questions, we are available. For our international customers, we prepare all customs and export documents for smooth transfer abroad.