Kullanılmış Bremsenprüfstand Saxon B 99 Gf-Eco Voll satın al (45.003)

Koşul: ikinci el, Üretim yılı: 2019, vites türü: diğer, ilk tescil: 01/2019, kilometre: 1.001 km, şoför kabini: diğer, Vehicle location: Bovenden Hodpfopccblox Ahqjn Body/Build: Saxon Brake Tester B 99 GF-ECO – a modern, fully digitalized brake testing rig suitable for trucks, buses, tractors, passenger cars, and commercial vehicles with a permissible axle load of up to 15 tons. Features a wide test width and elevated roller position for testing all-wheel-drive vehicles. Its particularly compact design allows installation into existing foundations with minimal depth required. Includes automatic test sequences with automatic axle assignment, brake systems and ovality diagnostics. Standard equipment includes automatic drive-out assistance, soft starter for drive motors, and remote control. Manufactured exclusively in Germany in accordance with DIN ISO 9001. Type approved according to Directive 2011 in Germany. Next inspection date: 05/2025. Always kept under cover. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to alterations, prior sale, and errors excepted.

Koşul: yeni, güç: 154 kW (209,38 bg), yakıt türü: dizel, vites türü: otomatik, renk: beyaz, frenler: retarder, koltuk sayısı: 33, Üretim yılı: 2026, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, klima, park ısıtıcısı, 2 x Iveco Daily new vehicles with COC, immediately available, equipped with GSR systems We are the official Ferqui representative in Germany. Ferqui is renowned for its high-quality fiberglass bodies. Since the late 1960s, Ferqui has specialized in fiberglass construction, making it a pioneer in this segment. The vehicles have a permissible gross weight of 7,200 kg and are covered by Iveco warranty. Iveco C70 chassis with automatic transmission and 210 HP Air-suspended rear axle, Telma retarder, LED headlights, auxiliary heater, luxury driver's seat with seat heating - Iveco Daily - 1 x coach / 1 x school/intercity bus on Iveco C70 chassis - Air-suspended rear axle - Telma - Length: 8.59 meters, width: 2.50 meters (school bus: 2.40 meters), height: 3.1 meters - Body made of fiberglass Hjdpfxey U T D Ss Ahqon - Framework made of galvanized steel - Front air conditioning - Webasto passenger compartment air conditioning RT 190 = 19 kW (dual/AC system) - Double glazing on coach / single glazing on school bus - Panoramic windscreen - Front electric door with lowered entrance - Maximum front entry height, without lowering, 300 mm - Emergency rear door - Total capacity: 33 persons (coach: 29 (28+1+1)) - USB sockets at each row of seats (coach) - Overhead luggage racks on left and right (coach) - Fresh air vents at each seat row - Convector heating - Iveco auxiliary water heater with pre-set timer Coach: 4.2 m³ luggage compartment - Rear luggage compartment - Spare wheel flap - 2 side luggage compartments - Exterior color: white Price: €159,990.00 for school bus in the above configuration Coach: €169,990.00 Net export possible.

Koşul: yeni, kilometre: 3 km, güç: 129 kW (175,39 bg), yakıt türü: dizel, toplam ağırlık: 3.500 kg, renk: kırmızı, vites türü: otomatik, emisyon sınıfı: Euro 6, koltuk sayısı: 3, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, klima, merkezi kilitleme, navigasyon sistemi, IVECO DAILY 35S18HA8/P: * Gross vehicle weight: 3,500 kg * EURO VI * 8-speed automatic transmission * Factory-fitted air suspension on rear axle * Central locking with remote control * Driver's air-sprung seat * Radio with Bluetooth * Navigation system * Multifunction leather steering wheel * Electric windows * Automatic climate control * Electrically adjustable exterior mirrors * LED headlights * LED daytime running lights * Paintwork in red, freely selectable for factory orders * Overhead storage compartment above the windscreen * 90 l fuel tank * VDI interface for telematics system, ACC + traffic jam assistant * Emergency braking assistant AEBS with City Brake * Tachograph * Electronic parking brake Platform: * Loading area approx. 510 x 210 cm * Unladen weight approx. 390 kg * Aluminium C-profile welded frame * Aluminium loading ramps * LED lighting left and right in the outer profile of the body * Electric winch with radio and cable remote control * Winch repositioning system * Mudguards with mud flaps * Tow hitch with ball head and additional socket on the platform * Work lights with switch in driver's cab Hedpfonqz Hcox Ahqon * 2 storage boxes * Optional: Integrated LED work lights in the side of the loading floor Load securing equipment also available from us: * Tension and lashing straps * Load securing bars * Warning vests * Transport boxes * Edge protectors * Airbags for load securing * Wheel chocks * etc. Financing and leasing available We manufacture bodies of any size and type for any chassis. Tarpaulin, GRP sandwich, aluminium. Visit us at: Bodies – Complete vehicles – Trailers – Consulting – Financing Subject to change and prior sale. No liability for typographical or input errors.

Koşul: iyi (kullanılmış), Kılavuz silindir, kılavuz pnömatik silindir, pnömatik silindir, kompakt silindir -Üretici: Festo, kılavuz silindir tipi DFM-20-30-B-PPV-A-GF 532316 -Piston: Ø 20 mm -Strok: 30 mm -Kaymalı kılavuz -Sayı: 2 adet silindir mevcut -Boyutlar: 116/83/Y36 mm -Ağırlık: 1,1 kg/adet. Hedpfxex Ifhpe Ahqsn

Koşul: ikinci el, 1200 x 1000 mm Plastik Palet Kutu – Kapalı Palet Kutusu 640 Litre, Kızaklı Hodpsy Hp Epjfx Ahqon Bu 1200 x 1000 mm boyutundaki plastik palet kutusu, depo, dağıtım merkezi ve endüstriyel ortamlarda büyük miktarda ürünün depolanması ve taşınması için sağlam ve çok yönlü bir çözümdür. Kapalı tasarımı sayesinde ve

Koşul: yeni, Press Force: 220 t Bending Length: 4100 mm Distance Between Uprights: 3600 mm Throat Depth: 410 mm Ram Speed: 150 mm/sec Working Speed: 10.0 mm/sec Return Speed: 140 mm/sec Stroke: 265 mm Installation Height: 480 mm Table Height: 900 mm Table Width: 110 mm Oil Capacity: 300 ltr. Operating Voltage: 400 Volt Total Power Requirement: 18.5 kW Weight: 15,000 kg Dimensions (L x W x H): 5000 x 2400 x 2850 mm ALPMAC manufacturer video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC product demonstration Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B220-4100 – CNC Electro-hydraulic Press Brake featuring: * Increased installation height * Extended cylinder stroke * Enlarged throat depth ----- ! MANUFACTURED FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! LOW-NOISE OPERATION THROUGH LOWER OPERATING PRESSURE (50-60 DB) ! INDUCTION-HARDENED & CHROMED CYLINDER PISTONS FOR CONTINUOUS OPERATION ! BACKGAUGE COMPONENTS MADE OF ALUMINIUM CAST ! POWERFUL BACKGAUGE DRIVE MOTOR (1.0 KW) ! MACHINE TABLE MADE FROM DURABLE & RESISTANT STEEL (C45) GREEN ECO Technology: Lower consumption. Reduced noise. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Full output only when truly needed ! Main motor is activated only via foot pedal ! No energy waste in standby mode ! Controlled start-up process Equipment: - CNC Electro-hydraulic Press Brake - DELEM CNC Control Model -DA-66T- Graphical/Touchscreen * 2D graphical touchscreen programming operation * 3D representation in simulation and production * 17" high-resolution color TFT screen * Bend sequence calculation * Product programming and true-to-size display * USB interface - CNC-controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - CNC electro-motorized backgauge (X axis) * with ball screw drive * Max. travel: 750 mm * X-axis travel speed: 350 mm/s * with 2x CNC-controlled backgauge fingers - CNC electro-motorized height adjustment (R axis) * Max. travel: 250 mm * R-axis travel speed: 300 mm/s Hsdpfx Ajynnk Eohqjn - CNC electro-motorized table crowning - ROLLERI gooseneck top tool "PS 135.85-R08", System "A" * includes quick-release clamping * includes crowning device in the tool holder - ROLLERI segmented universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety guard at the front of the machine (incl. FPSC) - 2x front support arms with SLIDING system * easily and keylessly height-adjustable - FIESSLER freely movable double foot pedal - CE mark / Declaration of Conformity

Koşul: yeni, Pressing force: 175 t Bending length: 3100 mm Distance between uprights: 2600 mm Throat depth: 410 mm Hedpfx Ajxaa Eqohqon Ram speed: 160 mm/sec Working speed: 10.0 mm/sec Return speed: 120 mm/sec Stroke: 265 mm Daylight opening: 480 mm Table height: 900 mm Table width: 90.0 mm Oil capacity: 230 ltr. Operating voltage: 400 Volt Total power requirement: 18.5 kW Weight: 10,500 kg Dimensions (L x W x H): 4100 x 2000 x 2820 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC Product Video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B175-3100 – CNC Electro-Hydraulic Press Brake with: * Increased daylight opening * Extended cylinder stroke * Enlarged throat depth ----- ! MANUFACTURED FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH OPERATIONAL SMOOTHNESS WITH REDUCED OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROMED CYLINDER PISTONS FOR CONTINUOUS OPERATION ! BACKGAUGE COMPONENTS MADE FROM CAST ALUMINUM ! BACKGAUGE WITH POWERFUL DRIVE MOTOR (1.0 KW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. Quieter operation. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Top performance only when truly required ! Main motor is activated only by the foot pedal ! No energy waste in standby mode ! Controlled start process Equipment: - CNC electro-hydraulic press brake - DELEM CNC Control model "DA-58T" – Graphic/Touchscreen * 2D graphical programming * 15" color TFT display with high resolution * Bend sequence calculation * Product programming and display in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - crowning - CNC electro-motorized backgauge (X axis) * with ball screws * Travel distance .. max. 750 mm * Travel speed X axis .. 350 mm/s * with 2 manually adjustable backgauge fingers - CNC electro-motorized height adjustment (R axis) * Travel distance .. max. 250 mm * Travel speed R axis .. 300 mm/s - CNC electro-motorized table crowning - ROLLERI gooseneck upper tool "PS 135.85-R08", system "A" * incl. quick-change clamping * incl. crowning device in the tool holder - ROLLERI segmented universal die block "M 460 R" * incl. 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device at the front of the machine (incl. FPSC) - 2x front support arms with SLIDING system * easily and tool-free height adjustable - FIESSLER free-moving double footswitch - CE marking / Declaration of Conformity

Üretim yılı: 2025, Koşul: yeni, Boyutlar (uzunluk/genişlik/yükseklik) 3000x3000x1650 mm Ağırlık 850 kg Toplam güç gereksinimi 16 kW Vakum membran presi RIBEXVAC ECO-B - Masa ölçüleri 2435 x 1440 mm - Çalışma alanı 2275 x 1230 mm - maks. çalışma yüksekliği 300 mm - Mutlak vakum 760 mm/Hg = -20 mbar - Vakum pompasının emiş gücü 1 kg. 1 cm² başına - Motor gücü vakum pompası 1,5 kW - Vakum pompası hızı 1450 rpm - Kapasite vakum pompası (Becker) 105 m³ / h - Gürültü emisyon değeri 68 dB(A) - maks. Sıcaklık 150ºC - Toplam güç 16 kW - Çalışma çevrimi 4 – 5 dk. - Düğmeler aracılığıyla manuel kontrol - Görüntüleme penceresi Hsdpfx Aov A E Nwjhqon - CE versiyonu - Boyutlar U=3000, G=3000, Y=1650 mm - Net ağırlık 850 kg Standart özellikler: - Ergonomik makine tasarımı - CE uygunluğu - Üst kısmın elektrikli yükseklik ayarı - 200 adet manyetik malzeme pedi dahil - Güvenlik sensörlü tezgah - Otomatik sıcaklık kontrolü - Kısa çalışma süreleri - Görüntüleme penceresi - Kuvars ısıtma boruları ile düşük enerji maliyetleri - PVC film için rulo tutucu

Koşul: ikinci el, Kılavuz silindir, kılavuz pnömatik silindir, pnömatik silindir, kompakt silindir -Tip: DFM-63-80-B-PPV-A-GF -Piston: Ø 63 mm -Strok: 80 mm -pnömatik: yastıklama -her iki taraf: ayarlanabilir -Yağlama rehber -Ağırlık: 7.34 kg Hedpfxodkpa Ns Ahqjn

Koşul: iyi (kullanılmış), Kılavuz silindir, kılavuz pnömatik silindir, pnömatik silindir, kompakt silindir -Üretici: Festo, kılavuz silindir tip DFM-20-80-B-P-A-GF-AJ 532316 -Piston: Ø 20 mm -Strok: 80 mm -Maks. basınç: 10 bar -Adet: 3x silindir mevcut -Fiyat: adet başına Hsdpfxjxlnhdj Ahqen -Ölçü: 270/85/H35 mm -Ağırlık: 1,5 kg/adet

Koşul: iyi (kullanılmış), Kılavuz silindir, kılavuz pnömatik silindir, pnömatik silindir, kompakt silindir Hodpfxoxlnlvs Ahqsn -Üretici: Festo, kılavuz silindir tipi DFM-20-80-B-P-A-GF 532316 -Piston: Ø 20 mm -Strok: 80 mm -Maks. basınç: 10 bar -Adet: 3 silindir mevcut -Fiyat: adet başı -Ölçüler: 190/85/H35 mm -Ağırlık: 1,5 kg/adet.

Koşul: ikinci el, Lineer tahrik, lineer dişli, vidalı kriko, iş mili tahriki -Üretici: Festo, Pnömatik lineer tahrik tipi DGPL-18-1040-PPV-A-GF-B -strok uzunluğu: 1040 mm -Maksimum: 8 bar -Boyutlar: 1190/51/H55 mm -Ağırlık: 3 kg Hodpfx Asikrqcshqen

Koşul: iyi (kullanılmış), Kılavuz silindir, kılavuz pnömatik silindir, pnömatik silindir, kompakt silindir -Üretici: Festo, kılavuz silindir tipi DFM-20-125-B-PPV-A-GF 532316 -Piston: Ø 20 mm -Strok: 200 mm -Maks. basınç: 10 bar -Adet: 2x silindir mevcut Hjdpsxwll Djfx Ahqsn -Fiyat: adet başı -Ölçüler: 260/85/Y55 mm -Ağırlık: 2,0 kg/adet.

Koşul: iyi (kullanılmış), Kılavuz silindir, kılavuz pnömatik silindir, pnömatik silindir, kompakt silindir - Üretici: Festo, kılavuz silindir tipi DFM-20-20-B-PPV-A-GF 532316 - Piston: Ø 20 mm - Strok: 20 mm - Kayar kılavuz - Adet: 2x silindir mevcut - Fiyat: adet başı - Ölçüler: 110/85/Y35 mm - Ağırlık: 1,0 kg/adet. Hedpex Iffzofx Ahqon

Koşul: yeni, vites türü: diğer, şoför kabini: diğer, Vehicle location: Bovenden, BPW axles. Hjdpfsi Rnxxjx Ahqon Body: Axles, drum-braked, 2 units available, price per axle! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Koşul: yeni, Üretim yılı: 2025, Cutting diameter: 335 mm Saw band length: 4400 x 34 x 1.1 mm Hsdjulnb Dspfx Ahqjn Table height: 750 mm Feed: 5.0 - 2300 mm per stroke Cutting range at 90 degrees: flat 500 x 335 mm Cutting range at 45 degrees: round 330 mm Cutting range at 45 degrees: flat 320 x 335 mm Cutting range at 45 degrees: round, left 305 mm Cutting range at 45 degrees: flat, left 305 x 335 mm Cutting range at 30 degrees: round 180 mm Cutting range at 30 degrees: flat 170 x 335 mm Cutting speed: 15 - 150 m/min Workpiece weight max.: 250 kg/m Total power requirement: 3.0 kW Machine weight approx.: 2550 kg Space requirement approx.: 4350 x 2300 x 1900 mm Standard equipment of the MEBAeco 335 DGA-2300: - Access protection according to CE regulations via light barrier - MEBA automatic band saw in proven twin-column linear design with integrated MEBA gripper feed system from 5.0 - 2300 mm per stroke - MEBA visualized program input with CNC control - fully automatic operation for any angle setting from 30° to 135°, length and quantity - easy program creation and management of up to 255 programs - Operator enters the sawing job in the display mask using a cutting image. Input errors are minimized and simple, secure creation of production orders by different operators is ensured MEBA High-Performance Package: - Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring. This ensures optimal conditions for any sawing task: constant pressure for solid material, constant feed for thin-walled profiles. - Fast and precise material length feed via rack and pinion with AC drive, maximum stroke length 2300 mm with integrated roller conveyor up to 3000 mm - Both sides of the gripper feed system’s clamping jaws can be opened - Ribbed strips for heavy material transport - Saw frame in a robust, low-vibration steel weldment construction - Saw band inclined by 3° towards the material support surface for maximum cutting performance and service life when sawing structural steel profiles - Combined saw band guide - Precision bearings for gentle deflection of saw bands - Chamfered carbide slide guides for band guidance - Mitre rotation point (zero point) is the intersection between the saw band and the fixed clamping jaw, so there is no change in length measurement when changing the angle setting. - Automatic compensation for kerf width at every angle position - NC angle programming at the control panel (these systems are always freestanding) - Patented double-mitre clamping system (ERP No. ...) with automatic movement of the clamping units. The material clamp automatically moves in the feed direction according to the desired mitre, ensuring the material is always clamped square and close to the saw band. Material clamping is performed with full-stroke cylinders. - Rapid traverse lowering of the saw frame via automatic height adjustment bar until just above the sawing material; during serial cutting, the saw frame moves just above the material and a new material section can be positioned - Optimal cycle times for single and serial cuts - AC frequency-controlled saw band drive, stepless adjustment from 15 to 150 m/min - Preloaded, low-maintenance ball rail linear guides on the material feed...

Koşul: ikinci el, kilometre: 327.750 km, ilk tescil: 03/2004, yakıt türü: dizel, dingil konfigürasyonu: 3 dingil, renk: kırmızı, vites türü: mekanik, emisyon sınıfı: Euro 3, yükleme alanı uzunluğu: 4.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 600 mm, Donanım: ABS, klima, vinç, Iveco Trakker 410 Tractor Unit with Swap System, Ballast Flatbed + Fassi F360 Crane 6x6 Suspension: Leaf-Air Wheelbase: 1st-2nd axle: 1.85 m 2nd-3rd axle: 4.75 m Fassi Crane Model: F360BXP.26 6x hydraulic extensions + 3x JIB 4x hydraulic outriggers 1x remote control 5th and 6th control function Flatbed: Hjdoy Iib Hopfx Ahqsn Length: 4.10 m Width: 2.48 m Height: 0.60 m Equipment: - Engine brake - Tachograph disc - Reversing camera - Electric windows - Cool box - Radio-CD-AUX - Sliding roof - Sun visor - Heated rear window - Trailer coupling (air-ABS-power) We are also happy to assist you with financing or leasing through our partners. All information without guarantee. Subject to error and prior sale. Equipment: Crane * Air suspension Air conditioning Hydraulic system: None Safety: ABS

Koşul: ikinci el, kilometre: 141.000 km, güç: 125 kW (169,95 bg), ilk tescil: 01/2010, toplam ağırlık: 3.500 kg, yakıt türü: dizel, renk: yeşil, bir sonraki muayene (TÜV): 03/2026, vites türü: mekanik, emisyon sınıfı: Euro 5, yükleme alanı genişliği: 2.025 mm, yükleme alanı uzunluğu: 2.850 mm, yükleme alanı yüksekliği: 340 mm, Üretim yılı: 2009, toplam uzunluk: 6.180 mm, toplam genişlik: 2.100 mm, toplam yükseklik: 2.350 mm, koltuk sayısı: 7, Donanım: ABS, is filtrasyon filtresi, merkezi kilitleme, park ısıtıcısı, 1st hand. German municipal vehicle. Only 141,000 total kilometers driven. Regularly serviced in the owner's workshop. Double cab with 7 seats and 4 doors. Unladen weight: 2,660 kg. Gross vehicle weight: 3,500 kg. Large 3.0 liter Iveco diesel engine with 2,998 cc and 170 hp / Euro 5 + EEV. 6-speed manual gearbox. Top speed: 156 km/h. Auxiliary heater (hot water system). Rockinger ball hitch tow bar, 2,800 kg braked towing capacity, 750 kg unbraked. Electrically adjustable exterior mirrors. ABS and ASR. Central locking (1 remote key and 1 standard key without remote included). Radio/cassette. Driver and passenger airbags (display indicates "airbag fault"!!). Suspension: Front transverse leaf spring, rear reinforced parabolic springs. Wheelbase: 3,450 mm. Hjdjxthduepfx Ahqon Body: Tip/Tilt flatbed from SAXXAS, German made, body dimensions: 2.85 m long / 2.20 m wide / 0.34 m high. Electrohydraulic three-way tipper body with steel floor and 6 recessed lashing eyes. Plastic storage boxes for small tools/material on both sides. Amber beacon on roof of cab. This offer applies only to business customers, freelancers, and public authorities. Subject to prior sale and errors. The purchase price is subject to differential taxation according to §25a UStG as this is an official vehicle. Therefore, no additional 19% VAT is charged on the purchase price, but the VAT cannot be separately extracted from the purchase price either.

Koşul: ikinci el, kilometre: 26.000 km, güç: 85 kW (115,57 bg), ilk tescil: 09/2015, yakıt türü: dizel, toplam ağırlık: 3.499 kg, renk: sarı, vites türü: otomatik, emisyon sınıfı: Euro 6, koltuk sayısı: 2, Üretim yılı: 2015, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, merkezi kilitleme, Food Truck / Sales Van Iveco Daily HiMatic with 26,000KM Net price: €29,990 Base Vehicle: IVECO DAILY HiMatic First registration: 09/2015 Mileage: 26,000km Inspection (TÜV): NEW Emission class: EURO 5 Transmission: 8-speed automatic Rims powder-coated in grey PVC flooring For additional features and detailed information, please see below! The vehicle conversion was carried out by a renowned workshop specializing solely in food truck conversions for over 10 years. See for yourself the quality of the conversion—visit us during our opening hours, no appointment necessary! For questions: Christian Hirsch Please try calling several times as we are often in customer consultations. You can find more food trucks at: ----Further offers at Please, no emails / no e-mails Due to time constraints, emails can only be answered sporadically. Thank you for your understanding!---- - Transmission: Hi-Matic automatic (8-speed) - ECO - Air suspension - Camera / parking assistance - On-board computer - Electrically adjustable and heated exterior mirrors - Central locking with remote control - Electric windows - LED interior lighting with motion sensor - Foldable shelving - Sliding door from driver's cabin to cargo area - Box interior: Width: 206cm Height: 210cm Length: 435cm - Driver’s seat height adjustable - Foldable passenger seat Special equipment: Long exterior mirrors, for vehicle width 2350 mm, Removal of double passenger seat, Remote control vehicle key, 180A alternator, Front mud flaps, Central locking prewiring for compartment/body door Driver’s airbag, Tow bar wiring prep, Anti-Slip Regulation (ASR), Version: S-series, Electrically adjustable and heated exterior mirrors, Brake assist, Electronic brakeforce distribution, Hsdpfx Aowicigshqsn Rear suspension: parabolic/air Front suspension: transverse leaf spring, Tinted windshield and side windows, Transmission: Hi-Matic automatic (8-speed), Body: Box by Krone, Cluster with pixel-matrix display, Fuel tank: 70L Headlight leveling system, Engine: 2.3L – 85kW Diesel Radio prewiring with speakers, Wheelbase: 3750mm Cab seats: double passenger seat with headrests, Maintenance indicator, Permitted GVW: 3.50t For questions: Christian Hirsch: ---- Further offers at Equipment was determined using a VIN check; technical errors may occur All details provided online are non-binding descriptions. They do not represent guaranteed features. The seller is not liable for typing or data transmission errors, changes, or input mistakes. Subject to error and prior sale.

Koşul: yeni, Cutting diameter: 410 mm Saw band length: 5800 x 41 x 1.3 mm Table height: 750 mm Cutting range at 90 degrees, flat: 700 x 410 mm Cutting range at 45 degrees, round: 410 mm Cutting range at 45 degrees, flat: 500 x 410 mm Cutting range at 45 degrees, round (left): 410 mm Cutting range at 45 degrees, flat (left): 430 x 410 mm Cutting range at 30 degrees, round: 320 mm Cutting range at 30 degrees, flat: 320 x 410 mm Cutting speed: 15 - 150 m/min Maximum workpiece weight: 250 kg/m Total power requirement: 5.5 kW Machine weight approx.: 3,200 kg Space requirement approx.: 4,500 x 2,800 x 2,000 mm - Ergonomic control panel, network-capable, with various option packages: * Teleservice for remote maintenance * Programming of sawing programs in work preparation * Import of sawing programs from CAD via DSTV interface and data export - Automatic material feed: * Compact design for shorter cuts or with flexible feeding gripper, available in nearly all lengths * Precise material positioning using servo positioning technology - Advanced electric saw feed with ball screw: * Maximum cutting performance and quality while extending saw blade life - Consistent use of state-of-the-art linear guideways: * Smooth running, high load capacity, low maintenance, and zero backlash - Unique and patented double miter system: * Material is always clamped at right angles Features: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 5.5 kW - Hydraulic full-stroke material clamping - Automatic movement of the clamping jaws - Automatic saw frame height adjustment - Minimum speed and saw blade monitoring Hsdpfxex Sr Drs Ahqen - Electric miter swiveling via servomotor - Visualized program input with CNC control - Integrated MEBA gripper feed system, from 5 to 2,300 mm per stroke with integrated roller conveyor *Special equipment/options: - Laser light for cut line indication / marking saw - Powered chip brush - Micro-dosing system - Clamping pressure regulation - Bundle clamping for material - Job menu function - Material database - Zero stop - Scraper belt conveyor for optimum chip removal, 2,000 mm length - Cut path monitoring

Koşul: ikinci el, kilometre: 31.000 km, güç: 207 kW (281,44 bg), ilk tescil: 08/2017, yakıt türü: dizel, boş ağırlık: 8.680 kg, azami yük ağırlığı: 7.310 kg, toplam ağırlık: 15.990 kg, lastik boyutu: 305/70R19.5, dingil konfigürasyonu: 4x2, dingil mesafesi: 3.690 mm, bir sonraki muayene (TÜV): 10/2026, renk: beyaz, şoför kabini: gündüz kabini, vites türü: mekanik, emisyon sınıfı: Euro 6, süspansiyon: çelik, koltuk sayısı: 3, yükleme alanı uzunluğu: 4.400 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Donanım: ABS, araç içi bilgisayar, diferansiyel kilidi, ek farlar, hidrolik direksiyon, hız sabitleyici, kabin, klima, koltuk ısıtıcı, merkezi kilitleme, sisal lambaları, tır çekici bağlantısı, vinç, çekiş kontrolü, Araç Konumu: Bovenden, çelik üstyapı, kısa kabin, 1x konfor koltuğu, çift kişilik koltuk, koltuk ısıtma, arka cam, elektrikli aynalar, ısıtmalı aynalar, sol elektrikli cam, sağ elektrikli cam, klima, güneşlik, hız sabitleyici, 8 vitesli manuel, ABS (anti blokaj sistemi), çekiş kontrolü (ASR), yan tahrik, diferansiyel kilidi, sis farları, çalışma lambaları, depolama kutusu, yaprak yaylar, hava-elektrik-hidrolik çeki demiri, sabitleme halkaları, alt koruma barı, salınımlı kapaklar, tavan penceresi, kabin arkasında vinç, acil durdurma, kepçe kontrolü, katlanabilir, 2 noktalı hidrolik destekler, uzaktan kumanda, 3x hidrolik uzatma, yeşil çevre etiketi. Dingil mesafesi: 3690 mm. Üst yapı: Uzaktan kumandalı Hiab 099E-3 HiDuo vinçli 3 yönlü damper kasa. MOTOR ARIZALI! Yük diyagramı: 4,2m-2300kg, 5,9m-1620kg, 7,7m-1200kg, 9,6m-960kg. AKSESUAR BİLGİLERİ GARANTİSİZ, değişiklik, ara satış ve yazım hatası hakkı saklıdır! Hodoydac Sepfx Ahqon

Koşul: mükemmel (kullanılmış), Satılık ünlü Alman markası BLITZ'in profesyonel vidalı kompresörü Model Monsun Pro Eco 15 – endüstriyel ekipman, çok iyi işçilik, sessiz çalışma, yüksek verimlilik. Atölyeler, üretim tesisleri, boya atölyeleri ve sürekli ve stabil hava basıncının gerektiği her yerde ideal. TEKNİK ÖZELLİKLER: • Üretici: Blitz • Model: Monsun Pro Eco 15 Hjdpfx Ahsy A Tp Roqsn • Motor gücü: 15 kW • Çalışma basıncı: 10 bar • Kapasite: yaklaşık 2.0 m3/dk • Devir: 1500 / 3000 dev/dk • Üretim yılı: 2011 • Besleme: 400V (3 faz) ÇALIŞMA SÜRESİ: • yaklaşık 17.954 saat DONANIM: - kontrol paneli - ses yalıtımlı kabin - bağlantıya hazır kurulum - kompakt tasarım TEKNİK DURUMU: • kompresör çalışır durumda • normal kullanım izleri • sorunsuz çalışıyor KULLANIM ALANLARI: • otomotiv servisleri • endüstri • üretim • boya atölyeleri • tamirhaneler

Koşul: ikinci el, Üretim yılı: 2022, Nakliye 4.000,00 € ve montaj ve devreye alma 5.000,00 €'dur. Kısmi torna ile B Kum 5 taşlama sistemi Çalışma prensibi Plaka besleme tablasına yerleştirilir. Parça torna tezgahına girer ve merkezlenir. Öğütme makinesinde baştan sona öğütülür. Plaka, kısmi torna tezgahında döndürülür. İkinci tarafı taşlama makinesinde zımparalanır. Bu durumda iki olasılık vardır: ya plaka çıkış tablasına gider ve boşaltılır ya da tekrar giriş tablasına gelir ve orada boşaltılır (ikinci seçenek çalışma süresini uzatır). Öğütme sisteminin ekipmanları 1 adet yüzeylere uygun üst öğütme lamel silindiri. Güç 3 kW; Ç 420 mm; Uzunluk 1300 mm. Çapraz elyafların zımparalanmasına uygun çapraz fırça. Ç 420 mm; Uzunluk 300 mm. Güç 1,1 kW. Çapraz elyafların zımparalanmasına uygun çapraz fırça. Ç 420 mm; Uzunluk 300 mm. Güç 1,1 kW. Ahşap liflerini boyuna ve enine mükemmel şekilde kesmek için 3 adet üst zımpara diski. Her biri 1,5 kW güç; Ç 400 mm. Kenarları pahlamak için disk fırça. Ünite derin fırça olarak çalışacaktır. Panel kenarlarını tespit ettikten sonra kapı kenarlarını takip edecektir. Güç 0,75 kW; Ç 250 mm. Makine özellikleri -Bu makinenin eşsiz zımparalama sistemi, ahşap zımparalamanın ve/veya panellerin ara zımparalamasının mükemmel bir şekilde yapılmasını garanti eder. - Tüm aletler frekans konvertörleri ile kontrol edilmektedir. - Tüm fırçalar göbeği değiştirmeden hızlı açılıp kapanan taşlama şeritleri ile donatılmıştır. - Plakalar, temizlik ve süreyi optimize etmek için hava kabarcıkları ile donatılmıştır. - Zımpara diskleri cırt cırtlı bağlantı sistemi ile donatılmıştır. - Parçaların kenar kırılmalarını önlemek için besleme ve devirler PLC ile kontrol edilmektedir. - Sistemin sürekli sökülebilmesi sayesinde 4 tarafta yüksek kalitede taşlama. - Ünitelerin otomatik ve hızlı değişimi. - Sabit üretim yüksekliği, PLC ve endüstriyel yazılımlar ile yüzey hattında zincirleme imkanı. - Tam frekans konvertörlü ekipmana dayalı disk, fırça ve beslemenin kademesiz hızı. - Farklı aşındırıcı kumlara sahip disk ve fırçaların sağa/sola döndürülmesi. - Plakaların, silindirlerin ve bantların ayrı ayrı sevk edilmesi. - Aşındırıcının kullanımını dengelemek ve yüzeylerdeki taşlama basıncının çeşitlendirilmesine olanak sağlamak için fırça ve disklerde ek ayarlamalar. - Çelik borudan yapılmış güçlü destek yatağı en iyi sertliği, stabiliteyi ve düzlüğü garanti eder. - Zımpara disklerinin çalışma yüzeyinin en iyi şekilde paralel olmasını sağlamak için planyalanmış üst destek yatağı. - Ünitelerin tüm taşıyıcıları lineer bilyalı rulmanlı yataklarla dizayn edilmiş olup, yüksek taşıma kapasitesine ve yüksek hassasiyete sahiptir. - Frekans konvertörü ile kontrol edilen motorlu besleme bandı, 0,55 kW. Emniyet tertibatlı makine kapakları. - Çalışma esnasında iş parçalarını gözlemlemek için pencereli makine kapıları. - Ünitelerin altında, işleme esnasında iş parçalarını tutmak için kauçuk kaplı D 80 mm baskı silindirleri bulunmaktadır. · Slatların tek tek değiştirilmesi sayesinde düşük takip maliyetleri. · Kapalı sistem gövdesi sayesinde düşük çalışma gürültüsü. · Tüm ünitelerde emme yuvaları ve bunlara karşılık gelen emme destekleri bulunur. Çıkarma ağızlı kapak plakası. · Temiz bir ortam için tamamen kapsüllenmiş makine gövdesi Hsdpfx Aevvkipjhqon

Koşul: iyi (kullanılmış), Üretim yılı: 1998, Yüzey zımpara makinesi Fabr.ABA Tip: ECOLINE 1006 Bj.1998, Abamatic 1 N.D. ile Hjdsvbb Iyopfx Ahqjn Zımparalama alanı maks: uzunluk 1000 mm genişlik 600 mm yükseklik 500 mm Manyetik tabla boyutu: 1000 mm X 500 mm. Kağıt bant filtre, çeşitli aksesuarlar Diğer veriler için veri sayfasına bakınız. Eksiksiz makine dokümantasyonu mevcuttur. Makine iyi durumda

Koşul: iyi (kullanılmış), Üretim yılı: 1999, Cutting diameter: 335 mm Cutting range at 90 degrees, flat: 500 x 335 mm Cutting range at 45 degrees, round: 330 / 305 mm Cutting range at 45 degrees, flat: 320 x 335 / 305 x 335 mm Cutting range at 60 degrees, round: 180 mm Cutting range at 60 degrees, flat: 170 x 335 mm Saw blade length: 4400 x 34 x 1.1 mm Control system: SIEMENS Speed: 15 - 150 m/min Working height: 750 mm Material support max.: 250 kg/m Coolant capacity: 80.0 l Oil capacity: 30.0 l Hedpfx Ahjy Uy Sveqsn Drive power: 5.5 kW Machine weight approx.: 1,980 kg Dimensions (L x W x H): 2,900 x 2,350 x 1,900 mm Current list price approx. 80,000 Euro Special price on request Equipment: - MEBA double miter band saw – fully automatic - with electronic miter adjustment via servomotor * Adjustment to the right up to 60° / left up to 45° - Material feed 0–600 mm // with multiple feed: 0–9,999 mm - Continuously adjustable downfeed speed 0-300 mm/min - Saw band speed via frequency-controlled AC drive (15–150 m/min) - Automatic cutting pressure and feed monitoring - Hydraulic full-stroke material clamping - Automatic movement of clamping jaws - Material feed via servo-controlled ball screw drive - Roller conveyor - Operating manual Special accessories included: - MEBA hydraulic bundle clamping device