Kullanılmış Compactsystem Martina 350 satın al (6.741)

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft enterprises. They are specifically designed for heating large utility areas such as production halls and workspaces in both craft and industrial businesses. These hot air systems require no extended preheating phases and can heat joinery workshops, carpentry shops, and other production sites in a very short period of time. Fuel sources include solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and safety regulation Directive 89/392 CE. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1,400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar Fsdpfx Asvz Hqyjl Uoph - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space required: width 1,700 mm, depth 2,000 mm, height 2,550 mm - Weight: 1,400 kg - Flue gas pipe diameter (connection): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85–90% - Required chimney overpressure: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For more specifications, please refer to the attached datasheet The two pipe connections for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ductwork per outlet is permitted for air distribution. Greater lengths are optionally available in consultation with the manufacturer. Please contact us for further information.

Durum: yeni, Üretim yılı: 2025, Dimensions (LxWxH): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industries and craft businesses. They are designed for heating larger areas such as workshops and production halls in both craft and industrial settings. These hot air systems do not require long heat-up phases and can heat up a joinery, carpentry workshop, or other production facilities in a very short time. Fuel sources include solid wood and its by-products such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of 24 July 1996, and Safety Directive Annex 89/392 EC. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both emission levels required by the 1st BImSchV (German Federal Immission Control Ordinance). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air output: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2 - 0.3 mbar - Flue draught at rated output: 0.18 mbar - Heated volume: approx. 2,500 m³ - Heated area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg Fedevz Hhxopfx Al Ujph - Flue outlet diameter (fitting): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85-90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Hot air outlet connections: 2 x Ø220 mm - For further data, please see the attached data sheet The two pipe sockets for hot air discharge are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and craft businesses. They have been developed for heating larger utility areas such as workshops and production spaces in craft and industrial enterprises. These hot air systems require no long heat-up phases and are capable of heating a joinery or carpentry workshop or other production facilities in a very short time. The furnaces are designed to use solid wood and its by-products as fuel, e.g. solid wood board offcuts, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces conform to the EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, as well as the safety guideline of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the emission limits stipulated by the 1st BImSchV. - Automatic mode and continuous air operation - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m3/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draught requirement at nominal output: 0.18 mbar Fodpevz Hq Tjfx Al Uoph - Heated volume: approx. 1,600 m3 - Heated area: approx. 300 m2 - Space requirement: width 800 mm, depth 1,170 mm, height 2,200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85 – 90 % - Required chimney draught: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet collar: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for outgoing hot air are located at the lower rear of the furnace. A maximum pipe length of 20 metres per connector is permitted for air distribution.

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total power requirement: 2 kW Fpedpfovz Hqgox Al Uoh Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industries and craft enterprises. They have been developed to heat large utility spaces, such as workshops and work areas in craft and industrial businesses. These hot air systems require no long warm-up phases and can heat up the workshop or production facilities of carpentries and joineries in a very short time. Fuel sources include solid wood and by-products such as solid wood panel scraps, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline 89/392 EC. All MARTINA series hot air furnaces—models 15, 30, 55, 85, 120, 180, 240, and 350—meet both emission stages required under the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air output: 18,000 m³/h - Combustion chamber depth: 1200 mm - Feed door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox draft: 0.2–0.3 mbar - Required draft at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust temperature: 290°C - Hot air outlet connectors: 2 x Ø 450 mm - For further technical data, please refer to the attached datasheet. The two duct connectors for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ducting is permitted per outlet for air distribution.

Durum: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm air furnace MARTINA 30 The MARTINA warm air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft operations. They are designed for heating larger usable spaces such as workshop halls and work areas of craft and industrial businesses. These warm air systems require no long heat-up phases and can heat joinery or carpentry shops, as well as other production facilities, within a short time. Solid wood and its by-products—such as remnants of solid wood panels, shavings, sawdust, pellets, or briquettes—serve as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37/EC (Italian Presidential Decree No. 459 of July 24, 1996) and the safety directive of Directive 89/392/EEC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the required emission limits of the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 29.8 kW - Thermal output (kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Warm air fan: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Required draught at nominal output: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (outlet): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached datasheet Fpjdpfx Ajvz Hqmel Uoh The two pipe outlets for outgoing warm air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per pipe outlet is permitted for air distribution.

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. These units are specifically designed for heating larger utility spaces such as factory halls and workspaces in trade and industrial operations. These warm air systems require no lengthy heat-up phase and quickly warm the workshop, joinery, carpentry, or other production spaces. Approved fuels include solid wood and its byproducts, e.g., offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392EC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st Federal Immission Control Ordinance (BImSchV) regarding required emission values. - Automatic and continuous fan operation - Thermal output: 14.8 kW - Thermal output Kcal: 12,720 - Fuel consumption: 4.5 kg/h - Air output: 2,400 m³/h - Firebox depth: 580 mm - Loading door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Required flue draft (nominal rating): 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Required installation space: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm Fpsdpfx Ajvz Hqtol Ush - Chimney diameter (suggested): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet nozzles: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet. The two warm air outlet connections are located at the rear of the furnace, towards the bottom section. A maximum of 20 meters of ducting per outlet is permitted for distributing the warm air.

Durum: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Warm air furnace MARTINA 55 The MARTINA warm air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft operations. They have been designed for heating large workspaces, such as workshops and work areas in craft and industrial businesses. These warm air systems require no lengthy heat-up phases and can quickly heat joiner’s or carpenter’s workshops as well as other production facilities. Solid wood and its byproducts—such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes—are used as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, and the safety requirements of Directive 89/392/EEC. All warm air furnaces in the MARTINA series—models 15, 30, 55, 85, 120, 180, 240, and 350—meet all emission standards required by both stages of the German 1st Federal Immission Control Ordinance (BImSchV). - Fully automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output (kcal): 43,000 - Fuel consumption: 15 kg/h - Airflow: 4,900 m³/h - Combustion chamber depth: 650 mm - Insertion door: 370 x 350 mm - Warm air blower: 1.12 kW / 230 V - Fire chamber negative pressure: 0.2–0.3 mbar - Flue draft, rated output: 0.18 mbar Fpedpevz Hq Hjfx Al Ujh - Heatable room volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Footprint: width 720 mm, depth 1000 mm, height 1900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (reference): 200 mm - Efficiency: 85–90% - Chimney draft pressure: 13 PA - Flue gas temperature: 290°C - Warm air outlet connectors: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet. The two warm air outlet duct connectors are located at the rear of the furnace near the bottom. A maximum of 20 meters of duct per air outlet is permitted for air distribution.

Durum: yeni gibi (kullanılmış), Üretim yılı: 2016, M024 — Wittmann Battenfeld Wittmann Battenfeld smart power 350/1000* (-) 📐 *CLAMPING UNIT* • Clamping force: 350 t • Embossing: YES • Max. mould weight: - kg • Max. mould weight per platen: - kg • Tie bar distance (W x H): 800x720 mm • Min. mould height: 400 mm • Max. mould height: - mm • Max. opening stroke: 1240 mm • Locating ring FIX / MOVE: 160 / 160 mm • Quick mould clamping system: NO 🔌 *MOULD INTERFACE* • Heating zones: 12 (24-pin combi plug TC/PW (6 zones per plug)) • Water cooling circuits: 8+6 • Hydraulic circuits (cores): 1+1 Fpsdpey Tn Dwsfx Al Uoh • Hydraulic hot runner sliders (nozzles): x • Pneumatic hot runner sliders: x 💉 *INJECTION UNIT* • Screw diameter: 45 mm • Nozzle seat + thread: R??+M24x1.6 • Injection unit type: 1000 • Screw stroke: - mm • Max. shot capacity: - cm³ • Max. injection pressure: 2480 bar • Max. injection throughput: 280 cm³/s • Accumulator SW / HW: NO / NO ⚡ *ELECTRICS / ROBOT* • Mould ejector: YES • Sockets 400 V/16 A: 7 • Sockets 400 V/32 A: 4 • Sockets 400 V/63 A: 0 • Robot type: Linear • Quick-change gripper: WGS-QLRD Midi • Vacuum connections: 6 • Compressed air connections: 5 • User inputs/outputs: 0 / 0

Durum: mükemmel (kullanılmış), HURST / Hale Fire Pump Co. marka, profesyonel hidrolik set – özellikle teknik kurtarma operasyonları için (itfaiye ve kurtarma ekipleri tarafından kullanılan). ⸻ Durum: Kullanılmış, çalışır ve test edilmiştir. Fotoğraflarda görünen normal kullanım izlerine sahiptir. İyi teknik durumda – çalışmaya hazır. ⸻ Teknik Özellikler: • Model: SP 45 • Üretici: Hale Fire Pump Co. / HURST • Üretim yılı: 1992 • Çalışma basıncı: 350 BAR • Besleme: 230V (monofaze) • Standart: DIN 14751 ⸻ Set İçeriği: • HURST hidrolik pompa • Hidrolik makas • Açıcı-spreader • Hidrolik hortumlar (2 adet) • Kablo makarası • Hızlı bağlantı seti • Taşıma çerçevesi ⸻ Kullanım Alanları: • Karayolu kurtarma işlemleri • Teknik işler ve yıkım çalışmaları • Kurtarma ekipleri / gönüllü veya profesyonel itfaiyeler • Endüstri (açma ve kesme işlemleri) ⸻ Fpodpfxsyxr Dxo Al Uoh Avantajlar: • Sağlam, profesyonel yapı • Yüksek kesme ve açma gücü • Kanıtlanmış HURST teknolojisi • Tam donanımlı set – çalışmaya hazır.

Durum: iyi (kullanılmış), Cyklos RPM 350 Plus Otomatik Döner Perforaj Makinesi Makine çok iyi durumda, üretime hazır. Açıklama: 350 mm çalışma genişliğine sahip otomatik perforaj cihazı. Sürtünmeli kâğıt beslemesi. Her bir kâğıtta 1-5 arasında perforaj hattı üretebilir. Besleyici ve çıkış tepsisi A3 ve daha küçük formatlara uygun. Kullanımı kolay. Kıvrım diski ile yükseltme seçeneği mevcut. Fpodjy Sd Upspfx Al Uoh Kâğıt sayacı. Dakikada 70-130 arası ayarlanabilir besleme hızı. 230V enerji beslemesi. Ağırlık: 20 kg. Çekya üretimi.

Durum: mükemmel (kullanılmış), Catalog number 7316 TECHNICAL DATA - track width: 350 mm - working width of the shaft with saw blades: 355 mm - max. saw blade diameter: 450 mm - max. cutting height: 170 mm - saw blade bore diameter: 70 mm - table dimensions: 1850 x 790 mm from above: - detents Fpjdpszab A Sofx Al Uoh - 2 smooth metal feed rollers - shaft with saw blades - 3 smooth metal feed rollers from below: - guide rail - detents - track - metal toothed feed roller - central electric lubrication - stepless feed speed adjustment - electric lifting/lowering of machine body, approx. 1 kW - feed motor: 2.2 kW - main motor: 75 kW - overall dimensions (L/W/H): 2600 x 1800 x 1700 mm - weight: 2700 kg – Used multi-blade saw – Condition: very good Net price: 68,900 PLN Net price: 16,400 EUR (depending on rate of 4.2 EUR) (Prices may change due to greater fluctuations)

Durum: mükemmel (kullanılmış), KATALOG NUMARASI: 6913 TEKNİK BİLGİLER - Palet genişliği: 360 mm - Şaft genişliği: 350 mm - Maksimum disk çapı: 350 mm - Disk deliği çapı: 80 mm - Maksimum kesme yüksekliği: 120 mm Yukarıdan: - Mandallar - Dişli çekiş mili - Mandallar - Düz kaydırma mili - Testereli mil - Baskı kaydırma mili Aşağıdan: - Tabla önünde 2 kaydırma silindiri - Kılavuz ray - Mandallar - Palet - Palet merkezi yağlama - Elektrikli testereli mil kaldırma - Elektrikli gövde kaldırma - Sürekli ilerleme hızı ayarı - İlerleme motoru yaklaşık 2,5 kW Fedpszabwiofx Al Ujph - Ana motor 30 kW - Toplam boyutlar (U/G/Y): 2500x2300x1900 mm - Ağırlık yaklaşık 4000 kg AVANTAJLAR - Çek Cumhuriyeti üretimi - Tablada 2 kaydırma silindiri - Kullanılmış çoklu testere makinesi - Çok iyi durumda Net fiyat: 31.900 PLN Net fiyat: 7.600 EUR Net fiyat 4,2 PLN/EUR kuru üzerinden hesaplanmaktadır (Döviz kurunda büyük dalgalanmalar olması durumunda fiyat değişebilir)

Durum: yeni, Satılık profesyonel Advanced Energy Thyro-A serisi güç kontrolörü (tristörlü). Cihaz YENİDİR – hiç kullanılmamıştır (depo beklemiş üründür). Yüksek kaliteli endüstriyel ekipman, ileri üretim tesislerinde kullanılır. 🔧 Teknik Bilgiler: Üretici: Advanced Energy Model: Thyro-A 3A 400-350 HF RL3 Fodoyw T Ipepfx Al Ueph Voltaj: 400 V Akım: 350 A Çıkış: Röle Çıkışı 4A / 250V Tip: Tristörlü güç kontrolörü (SCR) ⚙️ Kullanım Alanları: sanayi fırınları ısıtma sistemleri endüstriyel otomasyon üretim hatlarında güç yönetimi 📦 Paket İçeriği: 3x Thyro-A modülü endüstriyel muhafaza / soğutucu soğutma fanı fotoğraflardaki gibi set ✅ Durum: YENİ – hiç kullanılmamış Depolamadan kaynaklı minimal izler olabilir. Tamamen çalışır durumda.

Durum: iyi (kullanılmış), Teslimat kapsamına dahildir: 01x raf konektörü, kullanılmış Sabitleme tipi: yanal olarak raf dikliğinde Yüzey: sendz. galvanizli toplam uzunluk: 450 mm raf aralığı için: yaklaşık 350 mm profil boyutu: U 62 x 30 mm Ağırlık: 0,84 kg | adet. Fsdpfx Alsi Euzde Ueph

Durum: iyi (kullanılmış), Teslimat kapsamı şunları içerir: 01x U-çarpışma koruma köşesi, kullanılmış malzeme rengi: turuncu Toplam yükseklik: yaklaşık 350 mm Toplam genişlik: yaklaşık 200 mm Fpedpsk T Au Eofx Al Ueh İç genişlik: yaklaşık 160 mm Toplam derinlik: yaklaşık 360 mm İç derinlik: yaklaşık 240 mm Ayak boyutları: yaklaşık 140 x 140 mm Taban plakası boyutları: yaklaşık 340 x 200 x 8 mm Malzeme kalınlığı: yaklaşık 6,00 mm Matkap deliği Ø: yaklaşık 16 mm Matkap deliği sayısı: 04 adet. Ağırlık / birim: yaklaşık 14.850 kg Makale hakkında genel bilgi: Bu ürün sadece koleksiyon için sunulmaktadır. Bunun herhangi bir ek nakliyesi veya sevkiyatı bu ürünün nakliyesi, bizden ayrıca talep edilebilecek ek maliyetlerle ilişkilidir teslimat yerine veya teslimat kapsamına bağlı olarak.

Üretim yılı: 2000, durum: ikinci el, Delme makinesi Noble HM 35/350 BKE 200/5 Maksimum basınç 35 T 5 mm sac kalınlığı 40 kp/mm²'de Fodpfeg Dgyxjx Al Ujph

Durum: iyi (kullanılmış), Tünel geçiş genişliği: 540 mm Tünel geçiş yüksekliği: 40 mm Adet: 3 adet Fiyat / adet Fpsdpfxohinmfs Al Ujh

Durum: ikinci el, Teknik veriler: İz genişliği: 350 mm Maksimum kesme yüksekliği: 200 mm Maksimum testere bıçağı çapı: 300 mm Fjdpfx Asichkcol Ueph Kademesiz ayarlanabilir besleme Otomatik yağlama sistemi Anti-kickback koruması Ekstraksiyon nozulu: 2x220 mm Güvenlik anahtarı Üst şaft motor gücü: 55 kW Alt şaft motor gücü: 55 kW Güç kaynağı: 380 V Motor hızı: 2800 rpm Üretici: A.Costa Genel boyutlar: Uzunluk: 2700 mm Genişlik: 2220 mm Yükseklik: 1650 mm

Durum: ikinci el, Üretim yılı: 2017, zayıf kütlenin işlenmesi Fjdponqzkpjfx Al Usph - 1300 - 4500 mm arası kesme uzunluğu - 130 - 350 mm arası kütük çapı - 100 m3 / vardiya üretim - toplam güç 230 kW.

Üretim yılı: 2017, durum: ikinci el, zayıf kütlenin işlenmesi Fpodpfxsnwm R No Al Ujh - 1300 - 4500 mm arası kesme uzunluğu - 130 - 350 mm arası kütük çapı - 100 m3 / vardiya üretim - toplam güç 230 kW

Durum: mükemmel (kullanılmış), Bosch U-HD 350 Kg/h. Bj2015 Weishaupt brülör gaz veya yağ mümkün Fpedem Rhdyspfx Al Ush

Durum: ikinci el, SCULFORT Torna için 3-nokta Sabit Ø 350 mm Merkez yüksekliği: 550 mm Fpedjxxu Spepfx Al Uoh Maksimum çap: Ø 350 mm Sabitleme V arasındaki mesafe: 350 mm Genişlik: 1200 mm Kalınlık: 300 mm Toplam yükseklik: 1300 mm Ağırlık: yaklaşık 250 kg

Durum: yeni, TECHNICAL DATA: - Base area: 10,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard P6 raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The platforms can be expanded according to the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Primary and secondary beams - Bracing cross members - Flooring - Fixing materials Price examples: 30 m² | Area: 5,000 x 6,000 mm | €2,685.00 net, plus shipping costs and VAT 60 m² | Area: 5,000 x 12,000 mm | €4,785.00 net, plus shipping costs and VAT 90 m² | Area: 5,000 x 18,000 mm | €6,855.00 net, plus shipping costs and VAT 120 m² | Area: 5,000 x 24,000 mm | €8,955.00 net, plus shipping costs and VAT 60 m² | Area: 10,000 x 6,000 mm | €4,785.00 net, plus shipping costs and VAT 120 m² | Area: 10,000 x 12,000 mm | €8,645.00 net, plus shipping costs and VAT 180 m² | Area: 10,000 x 18,000 mm | €12,495.00 net, plus shipping costs and VAT 240 m² | Area: 10,000 x 24,000 mm | €16,335.00 net, plus shipping costs and VAT Further variants available. Please contact us. Fedpfx Alexpizaj Usph Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision protection - Diagonal supports instead of bracing cross members available for an additional charge YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MANUFACTURING TO SIZE This platform system is an example taken from our standard range. Of course, we design and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, assembly height and intended application. Based on your specifications, our design department will create a custom, non-binding offer for you. Whether for a new build, extension or modernization of existing systems, we will support you with solid expertise and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible at an extra charge. The additional costs depend on the place of delivery and the scope of the shipment and can be requested from us individually. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is understood as a unit/net price or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US The company DLK in Nordhorn trades in new and used products from the areas of warehouse logistics, conveyor technology, mezzanine platforms, textile storage as well as machines for trade, industry and crafts. We continuously offer you attractive used equipment from various manufacturers/brands under favourable terms. If you have any questions, please feel free to contact us. ✅ Four strong pillars – The building blocks of DLK success – Warehouse Technology | Levelmaker® | Logistics | Solutions

Durum: yeni, TECHNICAL DATA: - Base area: 15,000 x 20,000 mm [other variants available] - Grid: 5,000 x 5,000 mm - Top edge of floor finish: 3,340 mm - Clear height: 3,000 mm [customizable] - Floor finish: 38 mm chipboard, P6 raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the specified grid as standard. Other sizes and heights are available on request. Our team will be happy to advise you! Delivery scope: - Columns - Main and secondary beams - Diagonal cross bracing - Floor finish - Fastening material PRICES: 25 m² | Area: 5,000 x 5,000 mm | €2,345.00 net, plus transport costs and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,135.00 net, plus transport costs and VAT 75 m² | Area: 5,000 x 15,000 mm | €5,835.00 net, plus transport costs and VAT 100 m² | Area: 5,000 x 20,000 mm | €7,645.00 net, plus transport costs and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,555.00 net, plus transport costs and VAT 150 m² | Area: 10,000 x 15,000 mm | €10,985.00 net, plus transport costs and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,175.00 net, plus transport costs and VAT 300 m² | Area: 15,000 x 15,000 mm | €20,515.00 net, plus transport costs and VAT 400 m² | Area: 20,000 x 20,000 mm | €26,675.00 net, plus transport costs and VAT 500 m² | Area: 20,000 x 25,000 mm | €30,035.00 net, plus transport costs and VAT Further variants available. Optional accessories: - Guardrail Fsdpjxpic Rofx Al Usph - Flush wall connection - Staircase - Transfer station - Collision protection - Diagonal supports instead of cross bracing, available at an extra charge YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist with transportation and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The additional costs depend on the delivery location and the volume of the shipment and can be requested individually. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is a single net unit price or as specified in the description text (plus VAT). You will of course receive an invoice stating VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment deals from various manufacturers/brands at competitive conditions. Feel free to contact us with any questions. Four wins – The DLK success modules – Storage technology | Levelmaker® | Logistics | Solutions

Durum: yeni, Üretim yılı: 2025, kontrol tipi: NC kontrolü, tahrik tipi: hidrolik, silindir sayısı: 4, alt silindir çapı: 350 mm, üst silindir çapı: 350 mm, yan silindir çapı: 260 mm, merdane uzunluğu: 3.100 mm, sac kalınlığı (maks.): 20 mm, STANDART DONANIM * Alt top ve yan toplar hidrolik olarak gövdeye bağlı pistonlar ile aşağı yukarı lineer hareket etmektedir * Aşırı yüklemeye karşı korunmuştur * Üst top ve yan toplar hidromotor ve planet redüktör ile tahrik edilmiştir (3 top motor tahriklidir) * Üç adet dijital gösterge ile topların pozisyonu kolayca okunur * Hidrolik açılan kafa ve otomatik yukarı kalkan mil sayesinde kıvrılan parça kolayca çıkarılır * Hareketli kumanda panosu ile çok kolay kullanım * Kaynaklı çelik konstrüksiyon gövde * SAE 1050 (CK 50) indüksiyonla sertleştirilmiş, dövme veya hadde çelik miller * Konik kıvırma sistemi * Merkezi yağlama sistemi * Millerin paralel hareketi için hidrolik dengeleme sistemi (Ø280 -320 -350 -380 -400 -460) * Elektronik dengeleme sistemi(Ø500-550-580-620 -680) * Çift hızlı çalışma sistemi OPSİYONEL DONANIM * NC ve CNC kumanda ile otomasyon * Büyük çap kıvırmada destek için üst vinç (asansör) * Büyük çap kıvırmada destek için hidrolik yan dayamalar * Hidrolik sac çıkartma sistemi * Özel işler için taşlanmış ve parlatılmış toplar * Kademesiz hız ayar sistemi * Millerin paralel hareketi için elektronik dengeleme sistemi (Ø280 -320 -350 -380 -400 -460) TEKNİK ÖZELLİKLER Kıvırma Uzunluğu : 3100 mm Fjdpsw Smdfofx Al Ueph Ön Kıvırma : 12/16 mm Kıvırma : 16/20 mm Üst & Alt Top : 350 mm Yan Top : 260 mm Motor Gücü : 23,5 kw Bükme Hızı : 1,5 - 5 m/min Uzunluk : 5350 mm Genişlik : 1900 mm Yükseklik : 1950 mm Ağırlık : 14450 kg