Kullanılmış Compactsystem Martina 85 satın al (3.819)

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and craft businesses. They have been developed for heating larger utility areas such as workshops and production spaces in craft and industrial enterprises. These hot air systems require no long heat-up phases and are capable of heating a joinery or carpentry workshop or other production facilities in a very short time. The furnaces are designed to use solid wood and its by-products as fuel, e.g. solid wood board offcuts, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces conform to the EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, as well as the safety guideline of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the emission limits stipulated by the 1st BImSchV. - Automatic mode and continuous air operation - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m3/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar Hsdpfovz Hq Tox Ahqjn - Flue draught requirement at nominal output: 0.18 mbar - Heated volume: approx. 1,600 m3 - Heated area: approx. 300 m2 - Space requirement: width 800 mm, depth 1,170 mm, height 2,200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85 – 90 % - Required chimney draught: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet collar: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for outgoing hot air are located at the lower rear of the furnace. A maximum pipe length of 20 metres per connector is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Warm air furnace MARTINA 55 The MARTINA warm air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft operations. They have been designed for heating large workspaces, such as workshops and work areas in craft and industrial businesses. These warm air systems require no lengthy heat-up phases and can quickly heat joiner’s or carpenter’s workshops as well as other production facilities. Solid wood and its byproducts—such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes—are used as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, and the safety requirements of Directive 89/392/EEC. All warm air furnaces in the MARTINA series—models 15, 30, 55, 85, 120, 180, 240, and 350—meet all emission standards required by both stages of the German 1st Federal Immission Control Ordinance (BImSchV). - Fully automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output (kcal): 43,000 - Fuel consumption: 15 kg/h - Airflow: 4,900 m³/h - Combustion chamber depth: 650 mm - Insertion door: 370 x 350 mm - Warm air blower: 1.12 kW / 230 V - Fire chamber negative pressure: 0.2–0.3 mbar - Flue draft, rated output: 0.18 mbar - Heatable room volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Footprint: width 720 mm, depth 1000 mm, height 1900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (reference): 200 mm - Efficiency: 85–90% - Chimney draft pressure: 13 PA - Flue gas temperature: 290°C - Warm air outlet connectors: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet. Hjdpfjvz Hq Hex Ahqen The two warm air outlet duct connectors are located at the rear of the furnace near the bottom. A maximum of 20 meters of duct per air outlet is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft enterprises. They are specifically designed for heating large utility areas such as production halls and workspaces in both craft and industrial businesses. These hot air systems require no extended preheating phases and can heat joinery workshops, carpentry shops, and other production sites in a very short period of time. Fuel sources include solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and safety regulation Directive 89/392 CE. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1,400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space required: width 1,700 mm, depth 2,000 mm, height 2,550 mm - Weight: 1,400 kg - Flue gas pipe diameter (connection): 300 mm Hjdpevz Hqyofx Ahqen - Recommended chimney diameter: 350 mm - Efficiency: 85–90% - Required chimney overpressure: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For more specifications, please refer to the attached datasheet The two pipe connections for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ductwork per outlet is permitted for air distribution. Greater lengths are optionally available in consultation with the manufacturer. Please contact us for further information.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. These units are specifically designed for heating larger utility spaces such as factory halls and workspaces in trade and industrial operations. These warm air systems require no lengthy heat-up phase and quickly warm the workshop, joinery, carpentry, or other production spaces. Approved fuels include solid wood and its byproducts, e.g., offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392EC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st Federal Immission Control Ordinance (BImSchV) regarding required emission values. - Automatic and continuous fan operation Hjdpfjvz Hqtjx Ahqen - Thermal output: 14.8 kW - Thermal output Kcal: 12,720 - Fuel consumption: 4.5 kg/h - Air output: 2,400 m³/h - Firebox depth: 580 mm - Loading door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Required flue draft (nominal rating): 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Required installation space: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (suggested): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet nozzles: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet. The two warm air outlet connections are located at the rear of the furnace, towards the bottom section. A maximum of 20 meters of ducting per outlet is permitted for distributing the warm air.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm air furnace MARTINA 30 The MARTINA warm air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft operations. They are designed for heating larger usable spaces such as workshop halls and work areas of craft and industrial businesses. These warm air systems require no long heat-up phases and can heat joinery or carpentry shops, as well as other production facilities, within a short time. Hjdpfx Ajvz Hqmohqen Solid wood and its by-products—such as remnants of solid wood panels, shavings, sawdust, pellets, or briquettes—serve as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37/EC (Italian Presidential Decree No. 459 of July 24, 1996) and the safety directive of Directive 89/392/EEC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the required emission limits of the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 29.8 kW - Thermal output (kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Warm air fan: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Required draught at nominal output: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (outlet): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached datasheet The two pipe outlets for outgoing warm air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per pipe outlet is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industries and craft enterprises. They have been developed to heat large utility spaces, such as workshops and work areas in craft and industrial businesses. These hot air systems require no long warm-up phases and can heat up the workshop or production facilities of carpentries and joineries in a very short time. Hjdpevz Hqgjfx Ahqjn Fuel sources include solid wood and by-products such as solid wood panel scraps, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline 89/392 EC. All MARTINA series hot air furnaces—models 15, 30, 55, 85, 120, 180, 240, and 350—meet both emission stages required under the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air output: 18,000 m³/h - Combustion chamber depth: 1200 mm - Feed door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox draft: 0.2–0.3 mbar - Required draft at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust temperature: 290°C - Hot air outlet connectors: 2 x Ø 450 mm - For further technical data, please refer to the attached datasheet. The two duct connectors for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ducting is permitted per outlet for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (LxWxH): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industries and craft businesses. They are designed for heating larger areas such as workshops and production halls in both craft and industrial settings. These hot air systems do not require long heat-up phases and can heat up a joinery, carpentry workshop, or other production facilities in a very short time. Fuel sources include solid wood and its by-products such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of 24 July 1996, and Safety Directive Annex 89/392 EC. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both emission levels required by the 1st BImSchV (German Federal Immission Control Ordinance). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h Hedpfovz Hhxex Ahqsn - Air output: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2 - 0.3 mbar - Flue draught at rated output: 0.18 mbar - Heated volume: approx. 2,500 m³ - Heated area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue outlet diameter (fitting): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85-90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Hot air outlet connections: 2 x Ø220 mm - For further data, please see the attached data sheet The two pipe sockets for hot air discharge are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2013, Hersteller: Kaeser Kompressoren, Deutschland Baujahr: 2013 Maximaler Betriebsdruck: bis zu 13 Bar Liefermenge: 8,26 m³/min Energieeffizienz: Der Direktantrieb in Verbindung mit IE4-Effizienzmotoren (bzw. IE5 bei SFC-Modellen) gewährleistet höchste Energieeffizienz. Wartungsarm: Die Komponenten sind für eine lange Lebensdauer ausgelegt und ermöglichen einen einfachen Wartungszugang. SIGMA Control 2: Sorgt für effiziente Überwachung und Steuerung des Kompressors. Hsdpfx Ajyy U Shshqen Kompressortyp: Schraubenkompressor, ölgeschmiert Schallpegel: 70 dB Höhe: 1.900 mm Länge: 1.110 mm Breite: 1.760 mm Gewicht: 1.250 kg Elektrische Parameter: Netzspannung: 380~400 V Leistungsaufnahme: 45 kW Frequenz: 50 Hz Anwendermerkmale: Kühlungssystem: Wasserkühlung möglich, mit anschließender Wärmerückgewinnung Komplettes, betriebsbereites System Vollautomatischer Betrieb Hocheffektive Schalldämmung Schwingungsisolierung Pulverbeschichtete Gehäuseteile Für Umgebungstemperaturen bis +45°C geeignet Einfache Wartung: Schmiernippel für Motorlager sind außenliegend angeordnet (auch für den Lüftermotor).

Koşul: iyi (kullanılmış), Burada size satılık Polypal üreticisinin kullanılmış bir telafi plakasını sunuyoruz. Teslimata dahil olanlar: 01x şim, kullanılmış Üretici: Polypal Tip: SKUP Malzeme rengi: sendzimir galvanizli boyut: yakl. 130 x 85 mm kalınlık: yakl. 1,25 mm Ağırlık/adet: 0,119 kg Hodpfx Ahsg Siiqsqsn

Koşul: iyi (kullanılmış), Dik palet rafı için teknik veriler: Raf sistemi: Hovuma Teslimat kapsamı şunları içerir: 01x dik palet rafı, kullanılmış Malzeme rengi: krem beyazı Profil boyutu: 85 x 50 x 17 x 3,0 mm Profil tipi: C 808 S275 Çapraz ve diyagonal destekler dahil, Taban plakaları Dikmeler önceden monte edilmiştir Hedpfx Askwdd Eshqon (kaynaklı makas) 6.640 mm yükseklik 870 mm derinlik

Koşul: iyi (kullanılmış), Şim için teknik veriler: Üretici: Polypal Teslimata dahildir: 01x şim, kullanılmış Toplam genişlik: yaklaşık 130 mm Toplam derinlik: yaklaşık 85 mm Hjdpfxei Hkm Us Ahqsn Malzeme kalınlığı: yaklaşık 1,50 mm Matkap deliği Ø: yaklaşık 15 mm Matkap deliği sayısı: 2 adet. Ağırlık: yaklaşık 0,12 kg | adet.

Koşul: iyi (kullanılmış), Burada satılık ikinci el bir arka duvar ızgarası tutucusu sunuyoruz. Teslimata dahil olanlar: 01x tutucu f. arka duvar ızgarası, kullanılan malzeme rengi: sendzimir galvanizli ölçü ayağı A: yakl. 115 x 85 mm ölçülü ayak B: yakl. 50 x 85 mm mesafeli arka duvar ızgarası: yakl. 85 mm dikdörtgen delik boyutu: yakl. 21 x 10 mm mesafe merkez-merkez deliği: yakl. 50 mm Ağırlık/parça: yakl. 0,403 kg Talep üzerine nakliye masrafları Hsdogyfxpepfx Ahqsn

Koşul: yeni, Üretim yılı: 2024, delme kuvveti: 85 t, güç: 7,5 kW (10,20 bg), ÜRETİM YERİ : TÜRKİYE GARANTİ SÜRESİ : 12 AY TESLİM TARİHİ : SORUNUZ TESLİM ŞEKLİ : EXW BURSA/TÜRKİYE STANDART ÖZELLİKLER : Hsdpfxovfyngo Ahqjn • 12 ayrı hidrolik piston ve aynı anda iki kişinin çalışabileceği 2 ayrı ayak kumandası • 2Ayarlanabilir piston kurs mesafesi ile daha seri iş imkanı • 3Merkezi yağlama sistemi • 4Elektrik sviçli arka dayama • 5Çalışma lambası • 6Aynı gövde üzerinde 5 ayrı iş istasyonu: 6.1 - Ø22 mm zımba ve matris ve standart delik delme aparatları 6.2 - Dolu yuvarlak ve dolu kare malzeme kesme bıçak takımı 6.3 - Köşebent kesme bıçak takımı 6.4 - Lama ve sac kesme bıçak takımı 6.5 - U-çentik açma bıçak takımı TEKNİK ÖZELLİKLER : Ton 85. Motor gücü: Kw 7.5 Boyutlar: mm 1.920 x 950 x 2.040 (U x G x Y). Ağırlık: 2.315 Kg: 2.315 Kg DELME: Delme kapasitesi: mm Ø 33 x Kalınlık 20 mm. Girinti derinliği: mm 355. Delme stroku: mm 80. Çalışma yüksekliği: mm 1.080. KESME: Levhalar: mm 380 x 20. mm 480 x 15. Bıçak uzunluğu: mm 482. Yuvarlak çubuklar: mm Ø 50. Kare çubuklar: mm 50. 90 ° köşe profilleri: 150 x 150 x 15 mm. 45 ° açı profilleri: mm 80 x 8. SÜPÜRME: Maks kalınlık: mm 13. Genişlik: mm 52. Derinlik: mm 100. Çalışma yüksekliği: mm 940.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2007, Katalog numarası: 7809 TEKNİK BİLGİLER - presleme gücü: hidrolik - briket şekli: yuvarlak - briket çapı: 70 mm - depo çapı: 900 mm - makinenin otomatik çalışması - makine beslemesinde kontrol penceresi - ek yağ ısıtıcısı ile donatılmış - motor: 5,5 kW - ölçüler (u/g/y): 1600x1200x1500 mm - ağırlık: 685 kg AVANTAJLAR Hedpfezab Rpex Ahqon – boyasız – İtalyan üretimi – ek yağ ısıtıcısı ile donatılmış – ikinci el briket makinesi – çok iyi durumda Net fiyat: 36.900 PLN Net fiyat: 8.786 EUR, 4,20 EUR kuruna göre (Fiyatlar, kurdaki yüksek dalgalanmalara göre değişebilir)

Koşul: ikinci el, Teknik detaylar: Çene genişliği: 160 mm Makine ağırlığı yaklaşık: 55 kg Sıkıştırma genişliği: 310 mm Hidrolik mengene Çene derinliği 49 mm stokta var * Hedeu Nlp Ispfx Ahqjn

Üretim yılı: 2012, Koşul: iyi (kullanılmış), Makine iyi çalışır durumdadır. Hodpezadbdjfx Ahqon

Koşul: iyi (kullanılmış), Kod: 0353 Marka: SCM Model: SIGMA 85 KC - CE Standardı Elektronik yatay panel kesme makinesi, panellerin hassas kesimi için tutucularla donatılmıştır. Marangozhane, mobilya, özel üretim mobilyalar, kapılar, mutfaklar, plastikler, kompozit malzemeler ve diğer çeşitli uygulamalara uygundur – CE Standartlarına uygundur. Teknik veriler: Kesim uzunluğu: 3200 mm Kesim genişliği: 3200 mm Bıçak çıkıntısı: 85 mm Bıçak arabası ilerleme hızı: 6–30 m/dak Panel sabitleme için 7 adet panel tutucu Ana testere çapı: 350 mm, delik: 80 mm Ana motor gücü: 11 kW Devir: 3900 d/dk Puanlama ünitesi çapı: 160 mm, delik: 55 mm – Motor: 1,5 kW Otomatik hizalama: Çapraz kesimlerde hassasiyet sağlar, işleme süresini azaltır 3 adet ön panel destek yüzeyi Emiş giriş çapları: 2 adet 120 mm, 1 adet 150 mm Hedpfx Aey A Svpohqjn Basınçlı hava: 7-8 bar Kurulu makinenin dış ölçüleri: 5700 x 4350 x 1700 mm (Y) Ağırlık: 3300 kg

Koşul: mükemmel (kullanılmış), Üretim yılı: 2016, Fonksiyonellik: tamamen fonksiyonel, Rex RKS 85 | Sausage Hanging and Twisting System Manufacturer: REX Technologie GmbH & Co. KG Model / Type: RKS 85 Serial Number: 2130216 Year of Manufacture: 2016 Power Supply: 400 V / 50/60 Hz Hsdpsy Uchmefx Ahqen Current Protection: 3x 16 A Overall Dimensions: 1450 x 660 x 1400 mm The Rex Technologie RKS 85 is a high-performance, automatic sausage twisting and hanging system (with longitudinal calibration), designed as a peripheral device to operate directly with vacuum fillers. This 2016 unit serves as a key component in automating production processes in medium and large sausage manufacturing plants. The main function of the RKS 85 system is to precisely and consistently portion sausage strands into equal segments (in both natural and artificial or collagen casings), followed by automatic loop forming and precise placement onto hooks for seamless transfer to smoking rods. The machine minimizes the risk of casing rupture and guarantees a consistent weight and identical length for each individual sausage. Key features and advantages: - Precise portion control and calibration: The advanced belt-driven guiding and portioning system grips the filled casing gently yet securely, eliminating air pockets inside the sausage and ensuring a perfect appearance of the finished product. - Versatility and quick changeover: The machine efficiently handles a wide range of calibers and sausage lengths (from thin kabanos sausages to classic grill sausages and frankfurters). All operating parameters and product range changes are performed smoothly via the filling machine control computer or the machine’s own control panel.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2013, X ekseni hareket mesafesi: 935 mm, Y ekseni hareket mesafesi: 850 mm, Z ekseni hareket mesafesi: 650 mm, X ekseni hareket mesafesi: 935 mm Y ekseni hareket mesafesi: 850 mm Z ekseni hareket mesafesi: 650 mm Kontrol ünitesi üreticisi: HEIDENHAIN Kontrol modeli: iTNC 530 HSCI Tabla taşıma kapasitesi: 1.500 kg Maksimum mil devri: 18.000 d/dak Takım magazin yuvası sayısı: 60 Hsdpfx Aoy Ukq Nehqjn Eksen sayısı: 5 Açıklama Bu 5 eksenli DMG MORI DMU 85 monoBLOCK, 2013 yılında üretilmiştir – TOPLAM ÇALIŞMA SAATİ 33.500. X ekseninde 935 mm, Y ekseninde 850 mm ve Z ekseninde 650 mm’lik etkileyici hareket mesafelerine sahiptir. Makine, 1.040 mm çapında sağlam bir tabla ve maksimum 1.500 kg tabla yükleme kapasitesine sahiptir. Yüksek kaliteli işleme kabiliyetleri arıyorsanız, satılık DMG MORI DMU 85 monoBLOCK dik işleme merkezimizi değerlendirebilirsiniz. Daha fazla bilgi için bizimle iletişime geçin. • Maksimum ilerleme hızı: 40.000 mm/dak • Tabla çapı: Ø 1.040 mm

Koşul: yeni, GRAULE ZS 85 N çapraz kesim ve gönye testeresi - eğilebilir - İçindekiler: - GRAULE ZS 85 N çapraz kesim ve gönye testeresi - eğilebilir - Malzeme besleme omuzu lamine ahşaptan yapılmıştır - Makine sehpası ve testere bıçağı olmadan İçindekiler: - GRAULE makine standı ZS 85 N ila ZS 170 tipi için İçindekiler: - GRAULE tipi RO besleme makaralı konveyörü destek ayakları ve bağlantı braketi ile birlikte Bilyalı rulman monte edilmiş plastik silindirler Ø 40 mm, Silindir genişliği 300 mm, silindir aralığı yaklaşık 300 mm, Makaralı konveyör yüksekliği için destek ayakları 885 +/- 10 mm Şunları içerir: - Makaralı konveyör/uzunluk durdurucu GRAULE tip RLK Hedpfxsu R Sycj Ahqsn ölçekli ve geri katlanabilen malzeme durdurucu. Ø 40 mm bilyalı yataklı plastik makaralar, Silindir genişliği 300 mm, silindir aralığı yaklaşık 300 mm, Makaralı konveyör yüksekliği için destek ayakları 885 +/- 10 mm - yeni̇ sergi̇ maki̇nesi̇ -

Koşul: onarım gereklidir (kullanılmış), Enjeksiyon kalıplama makinesi, Engel ES 330/85, kullanılmış makine Resimlerde görüldüğü üzere, çalışma durumu belirsizdir. Toplam boyutlar: 3100 x 1950 x 2600 mm Ağırlık: 5500 kg Üretici: Engel Model: ES 330/85 Üretim yılı: 1997 Elektrik verileri: 380V, 60 A Hsdpfx Ajukn S Hshqen Kontrol kartları: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Koşul: ikinci el, Üretim yılı: 2002, 46° eğilebilir testere bıçağı Kızak uzunluğu ~ 3.200 mm Kesme genişliği ~ 1.100 mm Maksimum kesme yüksekliği 170 mm Hsdpfoy Spv Eox Ahqon Maksimum testere bıçağı çapı 500 mm Motor gücü 5,5 kW Çizici ünite 0,75 kW Martin Tip T 73 Classic format dairesel testere; masif ağaç, panel ve kaplamalı malzemelerin hassas kesimi için, eğilebilir testere bıçağı ve çizici ile donatılmıştır. Makine, hassas uzunlamasına, enine ve açılı kesimler yapmaya imkan verir ve profesyonel ahşap işleme atölyelerinde günlük kullanım için tasarlanmıştır. Geniş bir testere bıçağı seti dahildir.

Koşul: iyi (kullanılmış), Kesme genişliği 300 mm Kesme yüksekliği 85 mm Motor gücü 1,5 kW Testere bıçağı çapı 300 mm Bağlantı gerilimi 380 V Graule Tip ZS 85 N gönye kesme makinesi; boyuna kesim ve açılı kesimler için uygundur: dönebilen ve eğilebilir. Hodpfx Ajyiu Sfohqsn

Koşul: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2010, çalışma genişliği: 3.000 mm, renk: kırmızı, Merhaba, 300 kafa üzerinde bir Kverneland EG 85 Vario 6 kızaklı pulluk satıyorum, makine sürekli kullanımdadır, parametreleri aşağıdadır: Hodpfsuaziiox Ahqen Gövdeler arası mesafe (cm) 85 Başlık 300 Koruma türü Non - Stop (yay) + ek koruma Gövde sürme genişliği (cm) 30 - 50 cm Çerçevenin altındaki boşluk (cm) 70 - 75 c Ceset sayısı 6 Sizi satın almaya davet ediyorum.

Koşul: iyi (kullanılmış), Üretim yılı: 2018, Fonksiyonellik: tamamen fonksiyonel, Baling Press Presona LP 85 VH2 with cross-tying, Year of manufacture 2018 Technical Data: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pre-press force: 28 t Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical throughput: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank capacity: 2000 L Transport dimensions (press): 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: approx. 27,000 kg The press was dismantled from active operation. Technical documentation is available. Please note: All technical data is based on manufacturer information. We accept no liability for the provided information or for any possible errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee. Hedpsyz Snpofx Ahqen