Kullanılmış Stas 50 Cub Cereal satın al (40.987)

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2010, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: diğer, Üretim yılı: 2010, Aks konfigürasyonu Lastik ölçüsü: 385/65 R22.5 Aks markası: Mercedes-Benz Frenler: Disk frenler Süspansiyon: Havalı süspansiyon Arka aks 1: LM jantlar; Sol lastik dişi: 5 mm; Sağ lastik dişi: 3 mm Arka aks 2: LM jantlar; Sol lastik dişi: 5 mm; Sağ lastik dişi: 5 mm Arka aks 3: LM jantlar; Sol lastik dişi: 2 mm; Sağ lastik dişi: 4 mm Ağırlıklar Boş ağırlık: 6.370 kg Yük kapasitesi: 32.630 kg Azami toplam ağırlık: 39.000 kg Durum Hjdezgmkyopfx Ahvep Hasar: yok

Durum: ikinci el, azami yük ağırlığı: 34.725 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2024, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm 'X-Shape' First registration: 10/2024 Mileage: 47,509 km Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Unladen weight only 7,275 kg Z-chassis, cranked version Continuous floor in 5 mm Hardox steel HB450 Front wall and side walls in 4/3 mm Hardox steel HB450 Sloped front wall, inside with access steps 2-wing portal doors, pneumatic unlocking 1 GRAIN SLIDE in right door leaf Reinforced roof roll tarp, CENTRAL LOCKING HYVA tipping cylinder, Alpha type, suitable for high- and low-pressure Full-load ALU landing legs 2x air vibrators mounted underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a LIFT AXLE with starting aid WABCO Trailer-EBS with RSS roll stability control Hedpfx Aheyy Hakevop WABCO Smartboard Automatic tipping lowering system Lifting and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox, right 4x LED reversing lights RENTING is the new BUYING, with us also available as FULL-SERVICE RENTAL immediately

Durum: ikinci el, azami yük ağırlığı: 33.707 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 8.912 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.285 mm, yükleme alanı hacmi: 50 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.672 mm, Üretim yılı: 2025, Donanım: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration 09/2025, condition NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body in width) Unladen weight: 8,293 kg Z-chassis, cranked design Floor made of continuous 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Inclined front wall, with internal access ladder Deflector plates along the full length of side walls (to protect mudguards) Hydraulic rear wall flap (with pendulum function) HYVA tipping cylinder, Alpha type, suitable for high and low pressure Hjdpfxexriu Ee Ahvjp ALU landing legs, full load capacity 2x air vibrators mounted under the body SAF axles with large 430 mm disc brakes 1st axle is a lift axle with starting aid WABCO Trailer-EBS with anti-skid RSS WABCO Smartboard Automatic tipping lowering system Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Tool box on the right 4x LED reversing lights RENTING is the new BUYING – with us also available IMMEDIATELY in FULL-SERVICE RENTAL-----

Durum: yeni, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı hacmi: 50 m³, Donanım: ABS, ferroSTAR 50 m³ Şasi malzemesi: Çelik Şasi tipi: Z-Şasi King pin yük kapasitesi ulusal (t): 12 Dingil yük kapasitesi ulusal (t): 8 Dingil mesafesi (mm): 1310-1310 Saddel yüksekliği (mm): 1150 Şasi genişliği (mm): 1400 Yükleme genişliği (mm): 2325 İç yükseklik ön (mm) (IHF): 2285 İç yükseklik arka (mm) (IHB): 2285 Yükleme uzunluğu (mm): 8912 KC-Değeri: 0400 Toplam genişlik (mm): 2550 Hacim (m³): 50 Aks mesafesi (mm) (WB): 5800 Toplam uzunluk (mm): 10264,836 Akslar: SAF Diskli fren Fren tipi: SAF - SBS 2220 (Haldex) Offset (ET): 120 Opsiyon: 1. aks kaldırılabilir ve çekiş destekli Çekiş desteği, kamyondaki düğme (monte edilmez) ve fren pedalının üç kez basılmasıyla aktive edilir Fren balatası aşınma göstergesi bağlı Return-to-ride (RTR): 15 km/s Havalı körük koruma plakası ECAS hava süspansiyonu, kaldırma ve alçaltma valfli Kalkış sırasında havalı süspansiyon otomatik indirme; Smartboard üzerinden manuel kilitleme ve şasi üzerindeki anahtar ile Konsol EBS kontrolü, sürüş yönünde sol tarafta, aksların önünde Standart Smartboard Hava ve elektrik konsolu sürüş yönünde sağda Destek ayakları tipi: JOST MODUL Hjdpezdw Tyjfx Ahvsp Lastikler Lastik ölçüsü: 385/65R22.5 Lastik basınç izleme: Wabco Trailerpulse Jantlar: Alcoa Dura Bright TPMS sensör tipi: Jant montajlı sensör TPMS sensör tedarikçisi: ZF Bijon kapakları: Krom Aydınlatma üreticisi: Aspöck Aydınlatma tipi: ECOLED III - STAS logolu Çalışma lambası konumu (anahtarla): 2 adet LED geri vites lambası arkada, sürüş yönünde sol ve sağda, lamba taşıyıcıya monte Çalışma lambası konumu (anahtarla): 2 adet LED geri vites lambası önde, sürüş yönünde sol ve sağda, destek ayakları yakınında monte Yanal koruma manuel kumandalı Yanal koruma çamurluğu: Siyah, STAS logolu Brandası: Kaldırma tüpü üreticisi: Hyva (STAS üretici tercihi) Kaldırma silindiri açı: Normal ±47° Kaldırma silindiri modeli: Hyva - FC 169 Kaldırma stroku: 6230 Kaldırma silindiri maksimum basınç: 250 Hidrolik bağlantı: Döner bağlantı Hidrolik bağlantı - Boyut: 1 Hidrolik bağlantı - Dişi Hidrolik hortum uzunluğu: 2.100 mm Çamurluk: Domar STAS, beyaz çizgili Takım kutusu: Sürüş yönünde sağda, aksların önünde Alüminyum merdiven: 2,8 m uzunluğunda, sürüş yönünde sağda montajlı Süpürge ve kürek tutucu yeri: Araç ön duvarında, sürüş yönünde sol tarafta Süpürge ve kürek tutucu: Her biri 3 tutuculu, şaside, sürüş yönünde sol tarafta montajlı Yükleme manometresi Ø 100 mm, şasi önüne montajlı 2 adet plastik takoz Şasi-üst yapı bağlantı elemanı: Kauçuk polipler Ön panel: 3 mm HB450 çelik Yan panel: 4/3 mm HB450 çelik Taban: 5 mm HB450 çelik Taban traverslerinin altında kauçuk takozlar Arka panel tipi: Kanat kapılar Arka panel: 3 mm HB450 çelik Arka kapı menteşe sayısı: 3 çift menteşe Kanat kapı bölümü: 1/2'ye 1/2, 1 adet hurda kilidi Kapı açılışı: Önce sağ kapak açılır Açık kapakların sabitlenmesi: Zincirle Arka panel conta: Alt kısımda kauçuk conta, yanlarda 1.000 mm uzatma Ekstra kilitleme: Arka panelde pnömatik çift etkili Ekstra kilitleme kumandası: Kumanda panelinde manuel Tente/damper aksesuarları Branda sarıcı: Borulu sarma Çelik duba: Trapez kesitli, katlanabilir Döner tente tutucu

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2011, yükleme alanı uzunluğu: 9.000 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 2.200 mm, toplam uzunluk: 11.500 mm, toplam genişlik: 2.600 mm, toplam yükseklik: 3.700 mm, lastik boyutu: 425/65R22.5, lastik durumu: 60 yüzde, renk: kırmızı, Üretim yılı: 2011, Donanım: ABS, Lastik ebadı: 425/65R22.5 Arka dingil 1: Lastik dişi: %60; Redüksiyon: tek redüksiyonlu Arka dingil 2: Lastik dişi: %60; Redüksiyon: tek redüksiyonlu Arka dingil 3: Lastik dişi: %70; Redüksiyon: tek redüksiyonlu Boş ağırlık: 7.500 kg Yük kapasitesi: 37.500 kg toplam ağırlık: 45.000 kg Üst yapı markası: OTHER Hasar: yok = Firma Bilgileri = Heisterkamp Used Trucks BV sadece ikinci el kamyon satmıyor – biz Heisterkamp Transportation Solutions'un güvenilir bir parçasıyız. Hemen kullanıma hazır ikinci el kamyon ve treylerlerle ilgileniyoruz. Oldenzaal’daki lokasyonumuzda, bugünün gereksinimlerini karşılayan, güvenilir ve sektörümüzün yüksek standartlarına uygun araçları özenle seçiyoruz. Detaylar Hjdpfx Ahezharmovsp - Adres: Hanzepoort 25E, 7575 DB Oldenzaal, Hollanda - Telefon: - E-posta: - Web sitesi:

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Electrical system According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Hodpfxey U Syro Ahvsp Body/tipper body — "Body fully welded inside" Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Hydraulic system "Cargo Floor" 24 board system — smooth version! Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.636 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.300 mm, yükleme alanı hacmi: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for especially high stability and strength. Aggregated chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brakes 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment), 1st and 3rd axle separately liftable with starting aid (without tractor equipment), 3rd axle also with Optiturn, ECAS air suspension, Wabco TrailerPulse tire pressure monitoring with ZF wheel-mounted sensors. Tyres and Wheels 6 wheels with 385/65 R 22.5 tires according to manufacturer’s choice, Alcoa aluminum rims Dura-Bright, 11.75x22.5 ET 120, kingpin screwed into a 10 mm thick plate. Landing Gear Aluminum drop supports, 2 x 10 ton support load, pivoting feet used for air suspension. Brake System According to E.G. standard, dual-line braking system, EBS E-system Wabco with RSS (Roll Stability Support), spring-loaded brake system acting on two axles with control at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines with 2 LED five-chamber lights, Aspöck Europoint LED type, integrated in the aluminum rear, 24-volt system with 1 x 5-pin and 2 x 7-pin sockets, with side marker lights in LED version, 2 separate LED work lights at the rear, 2 LED work lights at the height of the first landing gear, 1 LED work light inside front left, operable from outside. Body/Tipper “Fully welded interior construction” Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN; aluminum tipper body, 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper flange, plank profiles fully welded on the inside. Floor designed as a moving floor system on 140 mm ALU crossbeams, floor load approx. 7 t/m², crossbeams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight execution, special ALU corner profiles beveled, smooth rear wall in straight execution with two ALU swing doors 50/30 mm thick with 4 rotary bolt locks, welded in ALU rear frame, mounted in Teflon and stainless steel bearings. Movable ALU wall suspended in reinforced upper flange with "Kevlar tarpaulin for complete emptying," side brush seal, and additional kevlar side tarpaulin. Integrated discharge funnel with folding cover plate at the floor closure, operable from outside at the left rear. Viewing window rear left, 1 sampling slider each in the rear doors (total 2), service door front left. Hjdpfx Ahefakkcevsp Hydraulic System "Cargo Floor moving floor system in the floor with hydraulically operated ALU profiles on aluminum square profiles with approx. 670 PE-HD sliders supported, floor thickness approx. 6 mm. Hydraulics with approx. 200 mm stroke, fixed portions at front wall, separate connection option for hydraulic line beneath vehicle with fixed halves, line size NW 21, fixed halves of to-be-specified size and design. Operating pressure 190, max 240 bar. Aluminum end pieces welded into the floor. Electric operation at rear left, with cable operation in a lockable, waterproof box. Accessories PVC mudguards with rubber mud flaps, ALU spare wheel holder, foldable ALU underrun protection, one plastic tool box approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, roll tarp 680 g/m² quality with roll ta

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Landing Legs Hodpfx Aoyh S Aishvjp Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Durum: yeni, azami yük ağırlığı: 28.320 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, Chassis: Constructed with a continuous frame, newly manufactured in a self-supporting aluminum (ALU) design featuring appropriate reinforcements in the lower flange for exceptional stability and strength. Crossmembers are 140mm high and reinforced (for high floor load capacity). Additional reinforcement via gusset plate in the front lower flange/vehicle frame area. Chassis from galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton with DCA air suspension, lifting and lowering functions, Wabco Smartboard info center, electronic brake wear indicator BVA readable in the tractor unit (display). First axle with traction assist (new EC regulation, without tractor unit installation). Optionally, first and third axles liftable as per MP request. Tyres and Wheels: 6 wheels with tires, size 385/65 R 22.5 as per manufacturer's choice (Br-Go-Co), on silver steel rims, size 11.75x22.5 ET 120. King Pin: 2" bolted into a 10mm thick plate. Landing Legs: Mechanical landing gears with two speeds, 2x 20-ton support load, swing foot. Brake System: According to E.C. norms, EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles, controlled from the rear, ALU air reservoir system. Hjdpsfi Nmwsfx Ahvop Electrical System: According to EC Norm 91/633 and 97/28 with two five-chamber rear lamps, Aspöck Europoint type, integrated in ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets. LED side marker lights, two reflective plates at the rear, front position lights (2x white), rear position lights (2x red), two separate halogen reversing lights integrated in underrun protection. Superstructure/Body: Interior fully welded. Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls of 30mm thick ALU plank profiles (2-3mm), 600mm wide, fully welded with upper and lower flange. Plank profiles fully welded inside. Floor with moving floor system laid on 140mm ALU crossmembers, forklift load approx. 9 t/m2. Crossmembers at approx. 350mm spacing for dense mounting. Special ALU corner profiles in chiseled design. Smooth rear wall, straight design, with two ALU swing doors, 50/30mm thick, with two rod locks mounted in a welded-in ALU rear frame with Teflon and stainless-steel bearings. Doors secured in opened position with lateral chains. Hard wear plates on side walls (approx. 2000x1500x4mm), fully welded. Mobile residual discharge wall with Kevlar tarpaulin, approx. 1800mm long plus lateral brushes with Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System: Moving floor system in the floor with hydraulically operated ALU profiles on ALU square profiles with approx. 880 PE-HD sliding elements and additional anti-lifting slide bearings, Type CF 10mm floor version. Hydraulic stroke approx. 200mm. Fixed ends at the front wall. Separate hydraulic connection possibility under the vehicle with fixed halves, pipe size NW 21. Fixing half with size and design to be specified. Operating pressure 190-max. 240 Bar. ALU end sections welded into the moving floor. Electric control rear left with remote integrated in lockable watertight box. Without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-spray flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, foldable side ALU underrun protection, one toolbox approx. 860x460x400

Durum: yeni, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, yükleme alanı hacmi: 92 m³, Donanım: ABS, - Panama floor 900g - 10 mm floor thickness - V-sheets 2000x1500x4 - Service door on the front wall - 12 pairs of lashing rings in the front wall Chassis: Reinforced continuous chassis, new superstructure manufactured in self-supporting design with appropriate reinforcements in the lower chord for particularly high stability and strength, 140 mm high cross members in reinforced design Axle and suspension Disc brakes 22.5, Jost axle assemblies, 3 x 9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA), first axle with traction help (without tractor unit equipment) Tyres and wheels Hsdpsfi Nmpofx Ahvjp 6 wheels with 385/65 R 22.5 premium tyres (manufacturer optional) mounted on steel rims, 11.75x22.5, ET 120 Landing legs Mechanical landing gears, 2 x 20 t support load Brake system EBS E-System by Wabco with RSS system (Roll Stability Support) and premium modulator, spring-loaded brake system acting on two axles, operated from the rear Electrical system According to EC directives 91/633 and 97/28, with 2 Aspöck Europoint five-chamber lamps integrated in the aluminium rear end, 24V system with 1 x 15-pin and 2 x 7-pin sockets, LED side marker lights, 2 separate LED reversing lights integrated in the underrun protection Superstructure / Tipper body Superstructure fully welded inside, reinforced side walls. Aluminium tipper body, side walls made of 30 mm strong aluminium plank profiles (2-3 mm wall thickness), 600 mm wide, fully welded with lower and upper chord, plank profiles fully welded on the inside. Aluminium front wall with 600 mm plank profile, 2-3 mm wall thickness, straight design, with 2 aluminium swing doors 50/30 mm thick, with sliding residual discharge wall with Kevlar cover approx. 1,500 mm length, plus side Kevlar curtain seal Hydraulic system: 'Cargo Floor' moving floor system Moving floor system in the body floor with hydraulically actuated aluminium profiles, mounted on aluminium square profiles with approx. 880 PE-HD sliding elements, CF type 8 mm floor design, fixed sections at the front wall, separate hydraulic line connection under the vehicle with fixed sections, operating pressure 190 - max. 240 bar, aluminium end pieces welded in the moving floor, without hydraulic hoses Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 aluminium spare wheel holder, side aluminium underrun protection in foldable design, 1 plastic toolbox approx. 860x460x400 mm, 3.7 m aluminium ladder, tarpaulin approx. 660g/m^2 with tarpaulin system incl. rolling slat, optional with side tension belts or quick release, catwalk on front wall with access ladder, 3 steel hoops with swing-out and lockable fastener, aluminium protective cover with foldable hinges for lighting, etc. +590€ delivery cost Unladen weight: approx. 7,700 kg Offer and photos non-binding

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.500 mm, yükleme alanı hacmi: 87 m³, Chassis Manufactured using self-supporting aluminum construction with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregate chassis made of aluminum, 140 mm frame height (max. 39 t), axles and suspension with disc brakes 22.5”, Jost axle units 3 x 9 tonnes with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake pad wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle can be lifted separately with start-assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 (manufacturer’s choice) on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel version + approx. 120 kg). Landing gears Aluminum drop leg landing gears, make: Alu-Leg, 2 x 10 t support load, for air suspension we use swivel feet. Hsdpfegcw Riox Ahvsp Brake system According to E.E.C. standard, dual-line brake system, Wabco EBS E-System with RSS (Roll Stability Support), spring-actuated parking brake acting on two axles with control at the rear, aluminum air reservoirs, premium modulator. Electrical system According to StVZO regulations, with two five-chamber lights type Aspöck Europoint III integrated into the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, with LED side marker lights, 2 work headlights at the rear, 2 LED work headlights at the sides at the height of the landing gears, 1 LED work headlight inside front left operable from outside. Body/tipper body — "Body fully welded inside" Bulkhead load 17,250 daN, rear and side walls 10,250 / 13,400 daN, aluminum tipper body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, fully welded with bottom and top chords, plank profiles fully welded inside! Floor as moving floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 7 t/m², closely spaced crossmembers (approx. 350 mm), aluminum bulkhead with 600 mm plank profile, 2-3 mm thick in straight design, special aluminum corner profiles in chamfered design, smooth rear wall in straight design with 2 aluminum swing doors 50/30 mm thick with 4 locking bars, fitted in a welded aluminum rear frame, mounted on Teflon and stainless steel bearings, traveling aluminum wall suspended from reinforced upper aluminum chord with "Kevlar tarp" for complete emptying, lateral brush sealing and additional Kevlar tarp at the sides, integrated discharge funnel with foldable cover plate at the rear left floor edge and operable from outside, inspection window at rear left, one sampling slider per rear door (total 2), service door on left in bulkhead. Hydraulic system "Cargo Floor" 24 board system — smooth version! Moving floor system in the base with hydraulically driven aluminum profiles on aluminum box profiles, fitted with approx. 880 PE-HD slide elements, approx. 8 mm floor thickness, hydraulic system with approx. 200 mm working stroke, fixed halves at bulkhead, separate possibility for connection of hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves to be specified in size and design, operating pressure 190–max. 240 bar, aluminum end pieces welded into the floor, actuation at the rear left with cable remote in a lockable waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber splash guards, aluminum spare wheel holder, foldable aluminum side underrun protection, 1

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, kilometre: 520.337 km, güç: 330 kW (448,67 bg), ilk tescil: 04/2019, yakıt türü: dizel, boş ağırlık: 7.717 kg, azami yük ağırlığı: 10.283 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 4x2, bir sonraki muayene (TÜV): 06/2026, yakıt: dizel, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, Üretim yılı: 2019, koltuk sayısı: 2, Donanım: diferansiyel kilidi, hız sabitleyici, klima, kör nokta asistanı, park ısıtıcısı, retarder, yokuş kalkış desteği, çekiş kontrolü, DAF XF 450 FT / Park Isıtıcı / Standart / Super Space Cab / Alüminyum • Üretici: DAF • Model: XF 450 FT • Kilometre: 520337 KM • İlk tescil: 04.2019 • Güç: 330 kW / 448 HP • Şanzıman: Otomatik • Uzun yol kabini • Süspansiyon: Yaprak/Havalı • Aks düzeni: 4x2 • 3 kademeli intarder • Navigasyon sistemi • Yokuş kalkış desteği • Kör nokta asistanı • Şerit takip asistanı • Çekiş kontrolü • Diferansiyel kilidi • Hız sabitleyici • 2 yatak • Hız sabitleyici • Soğutucu • Diferansiyel kilidi • Park isıtıcı • Tavan klimasi • Muayene: 06.2026 • Euro 6 • Boş ağırlık: 7717 kg • Taşıma kapasitesi: 10283 kg • Azami toplam ağırlık: 18000 kg • Alman aracı • Alman belgeleri • Hemen kullanıma hazır • Bu teklif bağlayıcı değildir ve değiştirilebilir. - Ara satış hakkı saklıdır, - Hata ve/veya yazım hataları hariçtir. Hsdoy Txgpjpfx Ahvsp - Satış, genel satış şartlarımıza göre yapılır.

Durum: iyi (kullanılmış), kilometre: 374.947 km, güç: 368 kW (500,34 bg), ilk tescil: 07/2019, yakıt türü: dizel, lastik boyutu: 385/65R22,5, dingil konfigürasyonu: 4x2, dingil mesafesi: 4.800 mm, yakıt: dizel, renk: yeşil, şoför kabini: yataklı kabin, vites türü: otomatik, vites sayısı: 12, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, toplam uzunluk: 8.680 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.550 mm, yükleme alanı uzunluğu: 5.830 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.110 mm, Üretim yılı: 2019, Donanım: ABS, Bluetooth, elektrikli ayna, elektrikli cam sistemi, hız sabitleyici, klima, koltuk ısıtıcı, merkezi kilitleme, navigasyon sistemi, park ısıtıcısı, tır çekici bağlantısı, çekiş kontrolü, = Diğer Seçenekler ve Donanımlar = - Isıtmalı aynalar - Dijital takograf - Takograf (kontrol cihazı) - Sabit - Halojen lamba - Hidrolik sistem - Manuel - PTO (yardımcı güç çıkışı) - Pompa - Radyo/kaset - Uyku kabini - Şerit takip asistanı - Kumaş Hodpfsxmrqlox Ahvsp = Notlar = Dingil sayısı: 2, Konfigürasyon: 4x2, Boş ağırlık: 9445 kg, Brüt ağırlık: 19500 kg, Toplam yakıt tankı hacmi: 780 litre, Römork bağlantısı, Dingil pimi çapı: 40 DIN, Beşinci teker: Sabit, Diferansiyel kilit sayısı: 1, Süspansiyon tipi: Havali süspansiyon, Kabin tipi: Uyku kabini, Hız sabitleyici, Takograf (kontrol cihazı), Dijital takograf, Klima, Park ısıtıcısı, Elektrikli camlar, Elektrikli aynalar, Radyo/Kaset, GPS navigasyon, Renk: Yeşil, Isıtmalı aynalar, Aydınlatma: Halojen lamba, Şerit takip asistanı, Klimatizasyon, Koltuk ısıtma, Bluetooth, Yanıp sönen lambalar, Motor gücü: 368 kW (493 Hp), Yakıt türü: Dizel, Euro: 6, Şanzıman: Otomatik, Şanzıman tipi: ZF, Vites adedi: 12, Hidrolik direksiyon, ABS, ASR, Hidrolik sistem, PTO, Kuyruk mili tipi: 1, Marş aküsü, Yan sayısı: 1, Pompa, Merkezi kilit, Koltuk düzeni: 1+1, Döşeme tipi: Kumaş, Koltuk ayarı: Manuel = Diğer Bilgiler = Şanzıman Şanzıman: ZF, 12 vites, otomatik Dingil Konfigürasyonu Frenler: Disk frenler Dingil 1: Lastik ölçüsü: 385/65R22,5; Yönlendirmeli; Sol lastik profili: 14 mm; Sağ lastik profili: 12 mm; Süspansiyon: Yaprak Dingil 2: Lastik ölçüsü: 315/80R22,5; İkiz lastik; Sol iç lastik profili: 13 mm; Sol dış lastik profili: 14 mm; Sağ iç lastik profili: 11 mm; Sağ dış lastik profili: 12 mm; Süspansiyon: Havalı süspansiyon Ağırlıklar Boş ağırlık: 9.445 kg Yük kapasitesi: 10.055 kg Azami yüklü ağırlık (zGG): 19.500 kg Fonksiyonel Yükleme yüzeyi yüksekliği: 153 cm Pompa: Evet Durum Teknik durumu: iyi Görsel durumu: iyi Hasar: yok Anahtar sayısı: 2 Finansal Bilgiler Leasing fiyatı: 642 € aylık (varsayılan, 60 ay); Daha fazla bilgi ve koşullar için bize ulaşın. Kimlik Plaka: KLEYN1 = Firma Bilgileri = Kleyn Trucks, dünyanın en büyük bağımsız ikinci el araç ticaret firmalarından biridir. Sürekli değişen 1200 adet ikinci el kamyon, çekici ve römork stokumuzdan seçim yapabilirsiniz. Tüm Avrupa markalarını, çeşitli model yılları ve fiyat aralıklarında sunuyoruz. Neden Kleyn Trucks'tan alışveriş yapmalısınız? Basit! • Büyük ve hızla değişen stok • Tanınan kalite • Uygun fiyat • Dürüst ticaret • Çok dil konuşabiliyoruz • Müşterilerimizi anlıyoruz • İthalat ve nakliye desteği • (İhracat) plakaları hızlıca düzenlenir • Uzman teknik hizmetler • "Tanınan kalite" güvencesi • Ve daha fazlası... Özel kampanyalarımızı ve tam stok listemizi görmek için lütfen web sitemizi ziyaret edin. Kleyn Trucks üzerinden leasing, çoğu Avrupa ülkesinde mümkündür! Leasing oranınızı hızlıca hesaplayın ve web sitemizden başvuru gönderin. Avrupa garanti paketimizi doğrudan sorabilirsiniz.

Durum: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.535 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 93 m³, Chassis Version with reinforced continuous frame, newly manufactured superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high in reinforced design (for high ground load capacity), additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to the support assembly (trailer construction max. 39,000 kg). Axles and Suspension "Disc brake 22.5" Jost (DCA) axle assemblies, 3x9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard infotainment center, electronic brake lining wear indicator (BVA) readable in the tractor unit (display), first axle with start-up aid (new EU regulation, without tractor unit equipment) (optional: 1st and 3rd axle liftable). Tyres and Wheels 6 wheels fitted with tyres size 385/65 R 22.5 of manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Landing Legs Mechanical landing gears with two speeds, 2x 20 tonnes load capacity with swivel foot. Brake System In accordance with EU standard; EBS electronic system Wabco with RSS (Roll-Stability-Support) and premium modulator, spring-loaded parking brake system operating on two axles with controls at the rear, ALU air reservoir system. Electrical System Hodpfx Ahsgcw Rmevep According to the guidelines of EU standard 91/633 and 97/28, with 2 five-chamber lamps type Aspöck Europoint 3 integrated into the aluminium rear cover, 24 Volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the underrun protection. Superstructure / Tipper Body "Body fully welded inside" Reinforced side walls, front wall load 17,250 daN, side and rear wall 13,400/10,400 daN. Aluminium tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower chord, plank profiles fully welded inside, floor as moving floor system mounted on 140 mm ALU crossmembers, forklift floor load approx. 9 t/m², crossmembers closely spaced (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special ALU corner profiles in chamfered design, smooth rear wall in straight design with 2 ALU swing doors 50/30 mm thick, with 2 locking bars locked in a welded ALU rear frame, mounted with Teflon and Inox bearings, doors secured when open with one chain each side, reinforced wear plates on the side walls approx. 2,000x1,500x4 mm, fully welded, moving residue discharge wall with Kevlar tarp approx. 1,800 mm long plus side Kevlar tarp seals, service door in front wall with ladder folding inward. Hydraulic System "Cargo Floor" Moving Floor System Moving floor system in floor with hydraulically operated ALU profiles on ALU box section profiles with approx. 880 PE-HD sliding blocks plus anti-lifting sliding bearings, Type CF 10 mm floor version, hydraulic stroke approx. 200 mm working travel, fixed ends on front wall, separate option for connecting hydraulic lines under the vehicle with fixed couplings, line size NW 21, fixed couplings with size and type to be specified, operating pressure 190–max. 240 bar, ALU end pieces welded in moving floor, electronic controls rear left with radio control integrated in lockable waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps,

Durum: ikinci el, 2 silindir. paslanmaz çelikten yapılmış, ayakta duran karıştırıcı tank, kullanılmış İçerik: 50 metreküp Sipariş numarası: 3810 Malzeme: 1.4401 ürün teması 1.4301 aksi halde içeride kaynaklar gıda güvenli zemin Boyutlar: 3.000 mm i. çap 3.100 mm çap 7.000 mm silindir. Yükseklik 350 mm üst kat 500 mm alt kat 400 mm yerden yükseklik Yaklaşık 8.250 mm toplam yükseklik Uygulamak: sil. çerçeve üzerinde duran konik tabanlı Silindirdeki pervane karıştırıcı eğimli dahili, 12 kW, 980 d/d. Silindir üzerinde çift ceket, 2 devre yaklaşık 14 m2, her biri 76 litre ve alt katta 1 devre, yaklaşık 5 m2, 90 litre çalışma basıncı 2 bar Yalıtım Silindirin etrafında 50 mm PU köpük, üst kat ve çerçeve, paslanmaz çelik kapak üretici sertifikasıyla ve malzeme sertifikaları Hjdpfx Ahov Dthwovsp Bağlantılar: Silindirde 1 adet 340 x 440 mm'lik menhol Üst katta sprey başlıklı Ø 300 havalandırma Çıkış alt merkez DN 65 gelişmiş Ağırlık: yaklaşık 6,5 ton

Durum: ikinci el, Dieses Angebot bezieht sich auf eine Pall Allegro 50 L Standard-Mischeinheit mit Wägeplattform. Die Anlage befindet sich in vollständig funktionsfähigem Zustand und ist sofort verfügbar. Die Pall Allegro 50 L Standard-Mischeinheit mit Wägeplattform ist eine robuste und vielseitige Lösung, die speziell für Single-Use-Bioprozessanwendungen in der pharmazeutischen und biotechnologischen Industrie entwickelt wurde. Sie wurde für eine gleichbleibend zuverlässige Mischleistung konstruiert und unterstützt sowohl kritische Upstream- als auch Downstream-Prozesse wie Pufferansatz, Medienvorbereitung und Formulierungsprozesse. Diese Plattform kombiniert hochpräzise Wägetechnik mit einem zuverlässigen Mischsystem und bietet somit eine verbesserte Prozesskontrolle in einem kompakten, leicht zu reinigenden Edelstahl-Gestell. Ihre Kompatibilität mit den Pall Allegro Single-Use-Mischern gewährleistet sowohl betriebliche Flexibilität als auch Sterilitätssicherheit für unterschiedlichste Anwendungen. Hodpfxjxl Dpdj Ahvop Wesentliche Merkmale: • Integriertes Design – Vereint Mischen und Wiegen in einem kompakten System. • Single-Use-kompatibel – Vollständig geeignet für Pall Allegro 2D-Mischbeutel. • Hochpräzise Wägefunktion – Präzisions-Wägezellen für zuverlässige Mengenkontrolle und Chargendokumentation. • Bedienerfreundliches Interface – Intuitives Bedienfeld mit regelbarer Mischgeschwindigkeit und anpassbaren Mischprofilen. • Hygienische Konstruktion – Edelstahlrahmen mit glatten Oberflächen und GMP-gerechter Ausführung. • Skalierbare Lösung – Ideal für den Pilotmaßstab bis hin zur Kleinserienproduktion. Technische Daten: • Modell: Allegro 50 L Standard Mixer & Wägeplattform • Mischvolumen: Bis zu 50 Liter • Mischtyp: Magnetgetriebener Impeller • Plattformmaterial: Edelstahl 304 • Max. Tragkraft: Bis zu 100 kg • Abmessungen (ca.): 600 mm x 600 mm x 1100 mm • Stromversorgung: 100–240 V AC / 50–60 Hz • Steuerungssystem: Integriertes Touchscreen-Bedienfeld • Hersteller: Pall Corporation Anwendungsgebiete: • Biopharmazeutische Produktion – Medien- und Pufferansatz, Formulierung, Halteschritte • Klinische Produktion – Flexible Nutzung in kleinen GMP-Betrieben • Impfstoffherstellung – Sterile Formulierungs- und Komponentenmischung • Gen- und Zelltherapie – Unterstützt sterile, geschlossene Systemprozesse • Prozessentwicklungslabore – Ideal zur Skalierung von Single-Use-Technologien Vorteile: • Sterile Prozesse – Unterstützung von Single-Use-Beuteln minimiert Kontaminationsrisiko • Kompakte Bauweise – Passt problemlos in Labor- und Produktionsumgebungen • Präzise Dosierung – Integriertes Wägesystem für exakte Prozesskontrolle • Reduzierter Reinigungsaufwand – Keine CIP/SIP dank Einweg-Mischbeuteln erforderlich • Pall-Qualität – Entwickelt von einem führenden Anbieter im Bereich Bioprozess-Technologien.

Durum: ikinci el, KIESERLING tarafından üretilen WRPF 35-50 çubuk doğrultma makinesi Çubuk çapı: 8 - 50 mm Hız: 50 m/dakikaya kadar Teslimat kapsamı şunları içerir: Hedpfxsymcmrj Ahvjp - Çubuk yükleme kanalı - Giriş tahrik silindiri - WRPF35 doğrultucu - Çıkış tahrik silindiri - Çubuk çıkış kanalı - Elektrik ekipmanı (Opsiyonel: HMI kumanda paneli ile YENİ) - Mevcut yedek parçalar - Dokümantasyon - Opsiyonel: Yükleme masası - Opsiyonel: Boşaltma beşiği Çubuk çapı: 8 - 50 mm Hız: 50 m/dakikaya kadar

Üretim yılı: 2025, durum: yenilenmiş (kullanılmış), Complete WDHF35/50/75 Peeling Line LIKE NEW, refurbished and tested in our workshop. Functionality and h9 tolerance are guaranteed. Working range Infeed diameter: 7 - 38 mm Finished diameter: 6 - 35 mm Minimum bar length: 2.9 m (3.2 m at maximum feed speed) Maximum bar length: 6.5 m Feed speed: 4 - 50 m/min, infinitely adjustable Cutting head RPM: 675 / 1330 / 4500 rpm, infinitely adjustable Scope of delivery KIESERLING WDHF 35/50/75 consisting of: - Infeed roller conveyor - Feed rollers - Peeling machine - Outfeed carriage - New outfeed pinch roll - Outfeed channel - Refurbishing in our workshop Hsdpfxjymb Uuj Ahvep - New hydraulic system - New lubrication system - New pneumatic system - New electrical equipment - Complete new set of SAAR-HARTMETALL tools and consumables - Optional: Laser diameter control system for tool correction Infeed diameter: 7 - 38 mm Finished diameter: 6 - 35 mm Minimum bar length: 2.9 m (3.2 m at maximum feed speed) Maximum bar length: 6.5 m Feed speed: 4 - 50 m/min, infinitely adjustable Cutting head RPM: 675 / 1330 / 4500 rpm, infinitely adjustable

Durum: ikinci el, OLIMPIA 80 üretimi Paslanmaz çelik kaynaklı boru üretim hattı MOD.50/60 TIG kaynak makinesi, dikiş rulosu ve orbital polisaj cihazı ile birlikte Teknik Özellikler: - Çap: 18 – 63,5 mm - Et kalınlığı: 0,5 – 3 mm - Uzunluk: 3 – 6 m Hodpoymautefx Ahvep - Hız: Maksimum 3 m/dak

Üretim yılı: 1993, durum: işlem için hazır (kullanılmış), makine/araç numarası: Seriennummer: 9302394, CNC kumandalı HATASTAR 2000 500 basın kapasitesidir t veya 5000 kN Makine aletleri yanı sıra kullanılabilir Anahtarı dolap yaptı Hjdpfx Asd Egc Ashvjp X1-+ R- / X2-+ R-balta turda rehber Y1 - + Y2-balta Üst araç hidrolik sıkma Pnömatik sac izleme aygıtı İkinci tow-eller operasyonu Evrensel şüpheliler 100 x 100 x 5'100 mm bıçak 280 x 5'100 mm Matrisler-orta plaka, b = 111 mm

Durum: yeni, Sac genişliği 1000 mm Hodpfx Asfv H A Hshvsp Sac kalınlığı 8.0 mm Stand genişliği 1070 mm Üst rulo çapı 150 mm Bükme kapasitesi 6,o mm Bağlı yük 4,0 kW Makine ağırlığı yaklaşık 1,4 t Yer gereksinimi yaklaşık 2,6 x 0,65 x 1,1 mm Profil bükme cihazlı sac bükme makinesi - Elektrikli ayarlanabilir arka silindir - Elektrikli ayarlanabilir alt silindir (malzeme gerginliği) - Arka silindir hareketi için dijital gösterge - Alt silindirin hareketi için dijital gösterge (malzeme sıkıştırma) - Sertleştirilmiş makaralar - Konik haddeleme - Döner üst silindir - Fren motoru - Acil durdurma - İngilizce Dokümantasyon - 400 V

Durum: yeni, Ostas 4 Silindirli Yuvarlak Bükme Makinesi 4R OHS 1570 x 150 Hidrolik yan silindir baskısı 3 dijital gösterge Hidrolik açılır yatak Sertleştirilmiş silindirler Konik bükme aparatı Ayrı kumanda paneli Hjdpfx Ajxrc Dtohvjp Silindir uzunluğu: 1570 mm Üst silindir çapı: 150 mm Yan silindir çapı: 130 mm Toplam motor gücü: 4+3 kW Ağırlık: 2470 kg Boyutlar (mm): 3350 x 1200 x 1210 (U x G x Y) Bükme Kapasite Bilgileri Minimum iç çapta 6 mm (Üst silindirin 5 katı) Minimum iç çapta 4 mm (Üst silindirin 1,5 katı) Ön Bükme Kapasite Bilgileri Minimum iç çapta 4 mm (Üst silindirin 5 katı) Minimum iç çapta 3 mm (Üst silindirin 1,5 katı) Tüm bükme kapasiteleri, 250 N/mm² akma dayanımı esas alınarak hesaplanmıştır Malzeme (ST 37 - ST 42 yapı çeliği)

Durum: yeni, Ostas 4-Roll Plate Bending Machine 4R OHS 2570 x 250 Hydraulic Side Roll Adjustment 3 Digital Displays Hodpfxoxrdcdj Ahvjp Hydraulic Drop-End Hardened Rolls Cone Bending Device Separate Control Panel Roll Length: 2570 mm Top Roll Diameter: 250 mm Side Roll Diameter: 200 mm Total Motor Power: 7.5 + 1.5 kW Weight: 6300 kg Dimensions (mm): 4550 x 1550 x 1470 (L x W x H) Bending Performance Data: 10 mm at minimum inner diameter (5 x top roll) 8 mm at minimum inner diameter (1.5 x top roll) Pre-bending Performance Data: 8 mm at minimum inner diameter (5 x top roll) 6 mm at minimum inner diameter (1.5 x top roll) All bending capacities are calculated based on a yield strength of 250 N/mm² Material (ST 37 – ST 42 structural steel) The images shown are for illustrative purposes only.

Durum: yeni, Ostas 3 Silindirli Yuvarlak Bükme Makinesi SMR-S 1070 x 150 Teknik özellikler: Özel ekipmanlar fiyata dahildir: sertleştirilmiş makaralar motorlu arka silindir ayarı dijital ekran sac genişliği 1070 mm sac kalınlığı 8,0 mm maks. sac kalınlığı 7,0 mm bükme rulo uzunluğu 1070 mm en küçük çap 225 mm rulo çapı 150 mm Ağırlık 1400 kg boyut L-W-H 2600 x 630 x 1020 mm motor 4,5 KW Ekipman: elektrik tahrikli üst ve alt silindir üst silindir dışarı döndürülebilir koni̇k bükme ci̇hazi asi̇metri̇k makara düzeneği̇ Hodpfx Ahjiw D Ecsvsp kendi̇ kendi̇ni̇ frenleyen ana motor sep. kontrol ve çalıştırma paneli güvenlik hattı, CE işareti değerler St-37 / 240 N/mm² için geçerlidir

Durum: yeni, Ostas 4-Rulo Yuvarlak Bükme Makinesi 4R OHS 3070 x 250 Hidrolik yan rulo hareketi 3 adet dijital gösterge Hidrolik açılır yatak Sertleştirilmiş rulolar Konik bükme aparatı Ayrı kumanda paneli Rulo uzunluğu : 3070 mm Üst rulo çapı: 250 mm Yan rulo çapı: 200 mm Toplam motor gücü : 7,5 + 1,5 kW Ağırlık : 9800 kg Boyutlar (mm) : 5050 x 1550 x 1470 (U x G x Y) Hodpfx Ahjyaqmaovop Bükme performansı 9 mm, minimum iç çapta (5 x üst rulo) 7 mm, minimum iç çapta (1,5 x üst rulo) Ön bükme performansı 7 mm, minimum iç çapta (5 x üst rulo) 5 mm, minimum iç çapta (1,5 x üst rulo) Tüm bükme kapasiteleri 250 N/mm2 akma sınırı baz alınarak hesaplanmıştır Malzeme: (ST 37 – ST 42 yapı çeliği)