Kullanılmış Wpm Wpm 400-C satın al (66.977)

Üretim yılı: 1999, Koşul: yenilenmiş (kullanılmış), The machine is currently undergoing an overhaul. PROCESSABLE MATERIALS Depending on material properties and sheet design: - Paper with a basis weight of at least 80 g/m² - Cardboard or solid board up to a basis weight of 2,000 g/m² and corrugated board up to a total thickness of 4 mm (maximum sheet curvature 4%) PERFORMANCE DATA Maximum sheet format: 820 x 1,130 mm Minimum sheet format: 350 x 400 mm Maximum die-cutting force: (400 t) 4.0 MN Maximum machine speed: 9,000 sheets/hour Standard Equipment of the Machine: Feeder Non-stop high-performance sheet feeder W3, equipped with: • Automatic non-stop device • Automatic pallet changing device • Suction head • Double sheet detection • Motorized stack side alignment • Motorized suction head adjustment • Belt table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull or push mode • Photoelectric sensor for precise side edge alignment • Fine adjustment of side lay • Two active front lays, each with a photoelectric sensor for monitoring • Two inactive front lays for sheet alignment stabilization • Separate fine adjustment of the gripper edge for drive and operator sides • LED display showing correct front and side register alignment • Trend display for sheet arrival • Misfeed rejection only disables the feeder • Height-adjustable rear lay for secure sheet guidance Die-Cutting Station • Roller-guided support rails for the locking frame • Roller guidance for the cutting plate on swiveling support arms • Motorized adjustment of die-cutting pressure • Automatic device for lifting the locking frame to the platen • Electronic die-cutting force display with maximum pressure limitation • Under-table vacuum system for thin cutting plates Godsyuuzdopfx Afrsit Stripping Section • Frame drive and lift for the upper tool frame • Sheet receiving system for the stripping board with Centerline fine adjustment • Sample sheet removal device • Upper stripping tool frame • Lower stripping tool frame Delivery Section • Fully automatic pile delivery system, preselectable • Partial stacks can be formed by automatically inserting uncut sheets (interleaves min. 250 g/m², max. 800 g/m²) • Frame lift for upper tool frame • Receiving device for change-over frames with motorized adjustment in running direction • Pneumatic frame locking • Selectable gripper opener cam and sheet ejector • Sheet alignment device • Integrated conveyor belt for removal of gripper edge waste or trim grids (double cut) • Separator sheet magazine with electronic level monitoring, refillable from operator side during operation • Tool frame with Centerline system • Change-over frames for standard delivery/gripper edge removal • Change-over frames for waste separation grid • Mounting kit for separator punch • 8 x sheet hold-down devices for standard delivery • 4 x crosswise support bars Options: • QTM – Patented guide rails • QTM – Locking frame with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Conversion to latest Siemens S7 control system • New generation frequency converters • Modem for remote service connection • Machine height increase to 900 mm

Koşul: işlem için hazır (kullanılmış), Bir Woschnik + Partner kesme ve gofre makinesi mevcuttur. Vuruş sayısı: 9000/saat, maksimum levha boyutları X/Y: 820mm/1130mm, minimum levha boyutları X/Y: 360mm/400mm, tutucu kenar ayarı: 10mm-17mm, kapama çerçevesi boyutları X/Y: 820mm/1134mm, maksimum kesim boyutları X/Y: 800mm/1120mm, kesim çizgisi yüksekliği: 23,8mm, maksimum kesme kuvveti: 4000kN. Makine boyutları X/Y/Z: yaklaşık 8000mm/2650mm/2950mm, ağırlık: yaklaşık 30000kg. Dokümantasyon mevcut. Yerinde inceleme mümkündür. Gisdpfxoyn Nzfj Afrjt

Koşul: yeni, Hassasiyetli Silindirik Torna Tezgahı Siemens Sinumerik 828 D kontrol ünitesi ile yapımcı: GDW model: C 400 Z conturline Hızlı değiştirilebilir takım tutucu B boyutu ile Durum: Yeni makine en yüksek güvenlik standartlarına sahip standart donanım: - LED tüp lamba - Ana mil için elektromekanik tutma freni, programlanabilir veya kontrol panelindeki düğme ile devreye alınabilir - Soğutma sıvısı sistemi - Hızlı değiştirilebilir takım tutucu B boyutu, bir adet tornalama takımı yuvası (B boyutunda) dahil - Ana mil iç konik için redüksiyon manşonu ME 70 / MK 4 - Mil başı için DIN 55027-6 standart koruma flanşı Gjdoxy Rw Repfx Afrsit - 2 sabit merkez ucu MK 4/5 - Takım çantasıyla birlikte set halinde kullanım takımları, anahtar seti, gres pompası - Yedek parça listeleri, kağıt ve CD formatında elektriksel dokümantasyon ile kullanım kılavuzu

Koşul: ikinci el, Üretim yılı: 2007, Baskı 40 t Strok 12 - 100 mm Strok sayısı 60 - 150 /dak C kol açıklığı 220 mm Montaj yüksekliği 340 mm Tabla yüzeyi 650 x 480 mm Koç yüzeyi 370 x 300 mm Koç ayarı 70 mm Tahrik gücü 4,0 kW Ağırlık 3,0 t Alan gereksinimi (GxDxY) 1,2 x 1,5 x 2,3 m Kademesiz ayarlanabilir tahrik, pnömatik kavrama/fren kombinasyonu, ışık bariyeri (Sick), hidrolik aşırı yük emniyeti, pnömatik koç ağırlığı dengeleme, manuel strok ayarı, manuel koç ayarı, merkezi yağlama, sabit tabla, iki el ve ayak pedallı çalışma. Giodpoyx Intsfx Afrot

Koşul: iyi (kullanılmış), Binder FED 400 Drying Oven Drying Oven / Laboratory Oven / Forced Air Oven Industrial model with forced convection Manufacturer: Binder GmbH Model: FED 400 Type: Drying oven with forced air circulation For sale is a used Binder FED 400 drying oven from an industrial facility closure. This oven is suitable for laboratory, research, development, quality assurance, material testing, as well as various industrial applications. The unit features electronic temperature control, forced air circulation, and a robust industrial-grade stainless steel interior. Technical data according to nameplate / manufacturer's specification: Manufacturer: Binder GmbH Model: FED 400 Type: E2 Serial No.: 15-21306 Made in Germany Electrical data: Operating voltage: 400 V Frequency: 50 / 60 Hz Power supply: 3 N~ Nominal power: 3.40 kW Current consumption: 7.4 A Protection class: IP20 Temperature data: Temperature range: up to 300 °C Forced air circulation Safety device according to DIN 12880 Class 2.0 External dimensions approx.: Width: 1235 mm Height: 1025 mm Depth: 765 mm Internal chamber approx.: Width: 1000 mm Height: 800 mm Depth: 500 mm Internal volume: approx. 400 liters Gedpsy R Axqofx Afroit Weight according to manufacturer: approx. 145 kg Features: - Binder FED 400 drying oven - Forced convection - Digital temperature control - Electronic control - Stainless steel chamber - Double hinged doors - Removable shelves - Rear exhaust port - Industrial and laboratory model Condition: Used equipment with age- and use-related signs of wear. Visual condition as per photos. The unit was in ongoing operation. Scope of delivery: - Binder FED 400 drying oven - Removable shelves - Delivery contents as shown Notes: Viewing possible by prior arrangement. Actual technical data, dimensions, weights and features may vary. No guarantee for provided information. Subject to prior sale. Commercial sale – sale without warranty.

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2022, Fonksiyonellik: tamamen fonksiyonel, giriş akımı türü: trifaze, toplam yükseklik: 1.040 mm, toplam genişlik: 560 mm, toplam uzunluk: 960 mm, toplam ağırlık: 130 kg, garanti süresi: 6 aylar, soğutma tipi: su, Donanım: dokümantasyon / kılavuz, Die Ausrüstung wurde von einem autorisierten Servicezentrum geprüft und ist betriebsbereit. NUR 178 BETRIEBSSTUNDEN! Wir gewähren 6 Monate Garantie. EWM TITAN XQ 400 puls C W EX WIFI R1 5m ist ein hochwertiges, deutsches MIG/MAG-Schweißgerät der Spitzenklasse, das speziell für den professionellen und industriellen Einsatz konzipiert wurde. Es überzeugt durch seine hohe Leistung, fortschrittliche synergische Programme und den innovativen AC/DC-Pulsbetrieb, der hervorragende Schweißergebnisse bei Stahl, Edelstahl, Aluminium und Buntmetallen gewährleistet. Die integrierte WiFi-Schnittstelle ermöglicht eine komfortable Fernsteuerung, Software-Updates sowie die nahtlose Einbindung in smarte Produktionsumgebungen. Modell: TITAN XQ 400 puls C W EX WIFI R1 (inkl. 5 m Schlauchpaket) Schweißstrombereich: 20 – 400 A Einschaltdauer (bei 40°C): 400 A (eta) 100 % Netzanschluss: 3~ 400 V, 50/60 Hz Kühlung: wassergekühlt (W-Ausführung) Schweißprozesse: MIG/MAG, Puls, Doppelpuls, forceArc, rootArc, AC-Arc Drahtelektrodendurchmesser: Stahl: 0,8 – 1,6 mm Aluminium: 1,0 – 1,6 mm Wirkungsgrad: >90 % Abmessungen (L×B×H): ca. 960 × 560 × 1040 mm Gewicht: ca. 130 kg Giedpfxoxdni Ss Afret Deutsche Qualität und Zuverlässigkeit. AC/DC-Puls – ideal zum Schweißen von Aluminium und Legierungen. Synergische Programme – schnelle und präzise Parameterwahl. WiFi-Schnittstelle – Fernsteuerung, Updates und Netzwerkintegration. Hoher Wirkungsgrad (>90 %) – geringer Energieverbrauch. Mobiler Fahrwagen – leichter Transport innerhalb der Werkstatt. Roboter-kompatibel über optionale Schnittstellen. Einsatzbereiche: - Automobilindustrie - Edelstahl- und Aluminiumkonstruktionen - Schiffbau - Serien- und Roboterfertigung - Industrieanlagenbau und Metallverarbeitung

Koşul: yeni, Bulgaristan'da ZMM SLIVEN tarafından üretilen tüm makine tipleri için yedek parça tedarik ediyoruz. Giodpeuladkefx Afrst

Koşul: yeni, Condition: New Country of Origin: Bulgaria Price: €40,850 Leasing Rate: €780.24 Swing Over Bed: 400 mm Distance Between Centers: 750 mm Center Height: 200 mm Spindle Bore: 52 mm Swing Over Cross Slide: 235 mm Bed Width: 320 mm Spindle Mount / DIN 55027: Size 6 Spindle Taper: 6 M Infinitely Variable Spindle Speeds (in 4 ranges) Spindle Speed Ranges (stepless): 18–98; 48–265; 144–790; 3 rpm Number of Feeds: 80 Longitudinal Feed: 0.015 – 0.6 mm/rev Cross Feed: 0.0075 – 0.3 mm/rev Number of Thread Pitches: 40 Metric Thread Range: 0.25 – 7.5 mm Imperial Thread Range: 120 – 4 TPI Module Thread Range: 0.0625 – 1.875 Cross Slide Travel: 235 mm Top Slide Travel: 110 mm Tailstock Quill Diameter: 50 mm Tailstock Taper: 4 MT Gijdpfxeyq Stio Afrot Tailstock Quill Travel: 100 mm Motor Power: 7.5 kW Weight: 1,530 kg Drive via variable gearbox (4 steps) 3-axis digital readout FAGOR with CSS (Constant Surface Speed) Amestra quick-change tool post, Multifix-compatible system, incl. 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3204/DIN 6350, Ø 200 mm Fixed center Coolant system Full-length rear chip guard Leadscrew and feed rod cover Chuck guard Tool holder guard Leveling bolts and plates Tailstock with quick clamping Low-voltage machine lamp Operating manual Equipment according to CE standard ADDITIONAL TURNING LENGTHS Turning Length 1,000 mm: €41,580,-

Koşul: iyi (kullanılmış), Üretim yılı: 2008, Ref.-No.: 18643 Manufacturer: ARBURG Gijdpfx Afjxvy Rlorst Model: 470 C 1500-400 Golden Edition Year of manufacture: 2008 Clamping Unit Clamping force: 150 tons Opening stroke: 500 mm Tie bar spacing (h x v): 470 x 470 mm Minimum mould height: 250 mm Daylight opening: 750 mm Injection Unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight (PS): 141 g Injection pressure: 2500 bar Dimensions and Weights Dimensions (LxWxH): 4.6 x 1.6 x 2.1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 unit Additional information: Communication card for ProSeS interface available (OPC-UA) Robot interface available (EUROMAP 67) The Golden Edition is a special version of the proven ALLROUNDER C series, distinguished by optimized hydraulic performance, stable process control, and high reliability. The machine features a clamping force of 150 tons and is ideally suited for producing technical plastic parts and applications with high quality requirements. Typical advantages of this series include: * Robust and durable construction * High process stability and repeatability * Reliable ARBURG control system * Good spare parts availability * Suitable for continuous operation in industrial environments The Golden Edition also stands out for its optimized performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is commonly used in fields such as automotive supply, technical plastic components, and serial production.

Koşul: ikinci el, Üretici firma: Multivac Tip Vakum makinesi Model C 400 Hazne derinliği: 470 mm Hazne yüksekliği: 170 mm veya 250 mm Sealbar konfigürasyonları: ön 650 mm + sağ 450 mm sol 520 mm + sağ 520 mm sol 520 mm + sağ 520 mm + ön 520 mm ön 700 mm Gedpfst Up Rrex Afrjit Gerilim: 3 x 400 V 50 Hz Entegre vakum pompası: 100 veya 140 m3/h Ana malzeme: Stainlees Çelik Makine ağırlığı: 250 kg

Koşul: yeni, Condition: New Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €36,070 Leasing rate: €688.94 Swing over bed: 400 mm Distance between centers: 1,000 mm Center height: 200 mm Spindle bore: 52 mm Swing over cross slide: 235 mm Bed width: 320 mm Spindle mount / DIN 55027: No. 6 Spindle taper: 6 M Number of spindle speeds: 12 Spindle speed range: 50–2,240 rpm Number of feeds: 80 Longitudinal feed: 0.015–0.6 mm/rev Cross feed: 0.0075–0.3 mm/rev Number of threads: 40 Metric thread range: 0.25–7.5 mm Inch thread range: 120–4 TPI Module thread range: 0.0625–1.875 DP thread range: 480–16 Cross slide travel: 235 mm Top slide travel: 110 mm Tailstock quill diameter: 50 mm Tailstock taper: 4 MT Tailstock quill travel: 100 mm Motor power: 4 kW Length: 2,750 mm Width: 1,100 mm Height: 1,600 mm Gsdpfx Aexzuu Asfrjit Weight: 1,540 kg Drive via geared transmission Three-axis digital readout Fagor 40i Multisuisse quick-change tool post incl. 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm Spindle nose No. 6 as per DIN 55027 Rapid traverse (4) Fixed center Coolant system 1 pc. flange plate for chuck Ø 200 mm 1 adapter sleeve Rear full-length chip splash guard Lead and feed screw cover Chuck guard Tool post guard Leveling bolts and plates Tailstock with quick clamp Low-voltage machine light Operating manual Equipment in accordance with "CE" FURTHER TURNING LENGTHS (PRICE ON REQUEST): Turning length 750 mm

Koşul: ikinci el, kilometre: 800.000 km, güç: 294 kW (399,73 bg), ilk tescil: 04/2006, yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, renk: beyaz, vites türü: mekanik, emisyon sınıfı: Euro 3, yükleme alanı uzunluğu: 6.550 mm, yükleme alanı genişliği: 2.540 mm, Üretim yılı: 2006, Donanım: ABS, klima, vinç, Volvo FH 13 400 / 6x2 Platform 6,55 m + VİNÇ Kazası Yok İyi Durumda! ? ÜRETİM YILI: 2006 ? KILOMETRE: 800.000 km DONANIM: Giodpfx Aeymvhvjfrjt ? ABS ? Merkezi Kilit ? Elektrikli Camlar ? Elektrikli Aynalar ? Hidrolik Direksiyon ? Takograf PLATFORM: 655 x 254 (U x G) YERDEN YÜKSEKLİK: 90 cm KAPASİTE: 13.500 kg TOPLAM AĞIRLIK: 26.000 kg DİNGİL MESAFESİ: 280/140 cm LASTİK EBADI: ÖN: 385/55R22,5 ARKA: 295/60R22,5 SÜSPANSİYON: Hava VİNÇ: HIAB XS 200 C - 5 İLETİŞİM: KUBA - POLONYA, İNGİLİZCE, ALMANCA, İTALYANCA SEBASTIAN - POLONYA, ALMANCA, İTALYANCA, ???? LASZLO - MACARCA COSTEL - ROMENCE (Romence: tüm ihracat işlemleri dahil numara verilir) RADEK - ???? : 9857

Koşul: iyi (kullanılmış), Allgemeine Informationen: Modell: Gildemeister CTX 400 Serie 2 Baujahr: ca. 2000 Steuerung: Heidenhain CNC Pilot Ausstattung: C-Achse mit angetriebenen Werkzeugen Technische Daten: Max. Drehdurchmesser: ca. 400 mm Max. Drehlänge: ca. 600 mm Umlaufdurchmesser über Bett: ca. 570 mm Verfahrweg X-Achse: ca. 220 mm Verfahrweg Z-Achse: ca. 635 mm Spindel: Spindeldrehzahl: bis 5.000 U/min Spindelleistung: ca. 21–28 kW Stangendurchlass: ca. 79 mm Revolver & Werkzeugaufnahme: 12-fach Revolver Gjdpfx Asy Ixxbefrjit Werkzeugaufnahme: VDI 30 C-Achse für Fräs- und Bohrbearbeitungen Eilgänge: X-Achse: ca. 20 m/min Z-Achse: ca. 24 m/min Zustand & Wartung: Die Maschine wurde einer kompletten hydraulischen Überholung unterzogen Neue Hydraulikpumpe installiert Komplettservice im Februar 2026 durchgeführt Aktueller Status: Die Maschine zeigt aktuell eine X-Achsen-Störung an Aus diesem Grund wird sie im aktuellen Zustand als Ersatzteilträger bzw. zum Selbsterhalt verkauft Weitere Informationen: Besichtigung vor Ort möglich Als solide und zuverlässige Drehmaschine bekannt, geeignet für mittelgroße Werkstücke Ideal für Drehbearbeitungen mit zusätzlicher Fräsfunktion über die C-Achse

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2009, Fonksiyonellik: tamamen fonksiyonel, Alt ve üst olmak üzere iki freze bıçağına sahip planya makinesi. Gijdpfx Aoufr H Ajfret

Koşul: mükemmel (kullanılmış), Üretim yılı: 2011, çalışma saatleri: 55.806 h, Fonksiyonellik: tamamen fonksiyonel, sıkıştırma kuvveti: 1.500 kN, vida çapı: 45 mm, toplam uzunluk: 4.700 mm, toplam genişlik: 1.700 mm, toplam yükseklik: 2.000 mm, toplam ağırlık: 4.850 kg, For sale is an Arburg injection moulding machine, model 470 C 1500-400. Included in the offer is an Arburg handling unit, type Multi Select with X/Y/Z axes 600/600/1400 mm. The machine is in excellent condition and ready for immediate operation. Technical specifications: Year of manufacture: 2011 Clamping force: 1,500 kN Gisdpfsw E Itisx Afret Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Operating hours: 55,806 h (pump) Injection unit: Ø 45 / SP 400 Injection volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1,580 bar Dimensions: approx. 4,700 x 1,700 x 2,000 mm Weight: 4,850 kg Transport and loading can be organised throughout Europe at an additional charge upon request. All prices are exclusive of VAT. Viewing available by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Koşul: iyi (kullanılmış), Üretim yılı: 2000, Arburg 270 C 400-100 (2000) Godpfsxqfi Aex Afreit Kilit kuvveti: 40 t Vida çapı: 20 mm Kolonlar arası mesafe: 270 x 269 mm Ağırlık: 25 g Tip: yatay Tahrik: hidrolik Saat: 138000 h

Koşul: ikinci el, Üretim yılı: 2020, Condition: used Year of manufacture: 2020 Stock number: 1658 Delivery time: immediate, subject to prior sale Country of origin: Bulgaria Price: €26,500 In stock: 1 Special price: €22,600 Swing diameter over bed: 400 mm Distance between centers: 1,000 mm Center height: 200 mm Spindle bore: 52 mm Swing diameter over cross slide: 235 mm Bed width: 320 mm Spindle mount / DIN 55027: No. 6 Spindle taper: 6 M Giodpfxswirdtj Afrot Number of spindle speeds: 12 Spindle speed range: 50 – 2,240 rpm Number of feeds: 80 Longitudinal feed: 0.015 - 0.6 mm/rev Cross feed: 0.0075 - 0.3 mm/rev Number of threads: 40 Metric thread range: 0.25 – 7.5 mm Imperial thread range: 120 – 4 TPI Module thread range: 0.0625 – 1.875 Cross slide travel: 235 mm Top slide travel: 110 mm Tailstock quill diameter: 50 mm Tailstock taper: 4 MT Tailstock quill travel: 100 mm Motor power: 4 kW Length: 2,750 mm Width: 1,100 mm Height: 1,600 mm Weight: 1,540 kg This machine is in use in our workshop for repair work, thus it has been used very little so far (original price €36,070.00). Drive via geared transmission 3-axis digital readout Fagor 40i Quick-change tool post Multifix type B incl. 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm Spindle nose No. 6 according to DIN 55027 Rapid traverse (4 directions) Fixed centre Coolant system 1 flange plate for chuck Ø 200 mm 1 adapter sleeve Rear chip guard along the full length Leadscrew and feed rod cover Chuck guard Toolholder guard Levelling bolts and plates Tailstock with quick-clamping Low-voltage machine lamp Operating manual and machine labels in GERMAN Equipment in compliance with CE standards

Koşul: mükemmel (kullanılmış), Üretim yılı: 2006, Arburg 320 C 400-170 Injection Moulding Machine Year of manufacture: 2006 Clamping force: 40 t Screw diameter: 30 mm Distance between tie bars: 320 × 320 mm Maximum injection volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle contact force: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Gijdpfxoxwu R Ne Afret Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg

Koşul: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Wolfking C 400 - UNI Industrial Meat Grinder Manufacturer: Wolfking Model: C 400 - UNI Machine No.: 61672 Year of manufacture: 2001 Power: 91 kW Power supply: 3 × 400 V, 50 Hz Rated current: 180 A Maximum current: 200 A Protection class: IP 65 Loading capacity: 125 kg The industrial Wolfking C 400 meat grinder is a high-performance machine designed for grinding large quantities of meat in production environments. The machine features an exceptionally robust construction, a powerful 91 kW drive system, and high resistance to demanding working conditions, thanks to its IP65 protection rating. The C 400 model enables fast and efficient processing of fresh, chilled, or slightly frozen meat. Its stable operating parameters and large loading chamber (125 kg) make it an ideal solution for medium and large-scale processing plants. Gsdpfxjx E Dvms Afrjit The strong drive system combined with the V/D Starter system ensures reliable start-up and continuous operation under heavy loads, resulting in excellent reliability and long machine lifespan.

Koşul: yeni gibi (sergi parçası), hareketli ara yatak Bulmak tip C 400 TS yüksekliği 160 mm kenetleme yüzeyinden orta ara dayanağa kadar yapar. 160 mm maksimum mil çapı 110 mm ağırlık 14 kg Gjdpfof I Smzex Afreit

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2022, Fonksiyonellik: tamamen fonksiyonel, Kistler NCFH 30 400 300 B H C G'den NC birleştirme modülü 30kN Fren 18Nm Godjwhvrrjpfx Afreit Satıcıya göre üretim yılı 2022 Pil hücrelerini preslemek için yapılan bir test düzeneğinden geliyor. Bu sadece biraz koşmak demektir. Kontrol kabini, birleştirme modülü (gösterildiği gibi sensör dahil) ve monitör dahil Dikkat: Parçalar tam olmalı ancak bazı kablolar kesilmiş. Maalesef devre şeması mevcut değil

Koşul: ikinci el, Üretim yılı: 2000, Üretici: Atoma Model: 823-C-400 Yıl: 2000 Tartı kanalı sayısı: 3 Maksimum ağırlık: 400 g Hata payı (e): 0,5 g Giedex Rz Hgopfx Afret Besleme hunisi ve titreşimli ray ile besleme. Konveyör bant Ürün durdurma hücre ile

Üretim yılı: 2000, Koşul: iyi (kullanılmış), Marka: SICA Makine Türü: Planet Dişli Testere Model: TRC/S/SY/U 63-400 Üretim Yılı: 2000 Gedoxu I Szjpfx Afreit

Koşul: yeni, Satılık profesyonel Advanced Energy Thyro-A serisi güç kontrolörü (tristörlü). Cihaz YENİDİR – hiç kullanılmamıştır (depo beklemiş üründür). Yüksek kaliteli endüstriyel ekipman, ileri üretim tesislerinde kullanılır. 🔧 Teknik Bilgiler: Üretici: Advanced Energy Model: Thyro-A 3A 400-350 HF RL3 Voltaj: 400 V Akım: 350 A Çıkış: Röle Çıkışı 4A / 250V Tip: Tristörlü güç kontrolörü (SCR) ⚙️ Kullanım Alanları: sanayi fırınları ısıtma sistemleri endüstriyel otomasyon üretim hatlarında güç yönetimi 📦 Paket İçeriği: 3x Thyro-A modülü endüstriyel muhafaza / soğutucu soğutma fanı fotoğraflardaki gibi set ✅ Durum: YENİ – hiç kullanılmamış Gedpfx Afsyw T Ipjreit Depolamadan kaynaklı minimal izler olabilir. Tamamen çalışır durumda.

Koşul: mükemmel (kullanılmış), Device for precise setting, measuring, and inspection of CNC cutting tools. EZset optical camera system with EZvision software (Image Controller 1). Very good condition, complete, ready for operation. Technical data and equipment: • Model: PRECIsset 400 • Measuring system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • X / Z axis measuring range: up to 400 mm • Camera with image processing system • Edge, length, and diameter measurement function • Option to save and print results • USB and RS interfaces • Power supply: 12 V DC, 40 VA • Year of manufacture approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Display works correctly • Längsachse / Querachse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool presetting before CNC machining. The EZset vision system allows for blade geometry analysis and tool wear monitoring. High measurement accuracy due to a stable column and industrial-grade optics. Gisdpfx Afjxn Awxorot