Kullanılmış Insanlar Tıpa satın al (17.944)

Durumu: kullanılmış, Üretim yılı: 2001, Şişe Kapak Çıkarıcı Üretici: Fa. Rink Model: KM 670/2K Üretim yılı: 2001 Makine (Ek): Adımlı çalışan kapak çıkarıcı Güç: 6,5 kW Akım: 10 A Gerilim: 230/400 V Frekans: 50 Hz Uzunluk: 2800 mm Genişlik: 1000 mm Yükseklik: 2300 mm Formatlar: 0,33 lt şişeler, 0,35 lt şişeler, 0,5 lt şişeler, modül kasa Kat düzeni: 2x20 şişe, 2x24 şişe Çalışma yönü: soldan sağa Kumanda/kontrol: Simatic S5 Konum: bağımsız Temel yapı: Kare profil gövde, kalot ayaklı boyalı Gtsdpfxsw Ta D Ue Ac Aet Donanım: Kasa taşıma sistemi, 2x20 ve 2x24 şişe için format setleri/kapak başlıkları, kapılı gövde, koruma ızgarası, kontrol panosu, çeşitli yedek parçalar.

Durumu: kullanılmış, mantarların manuel beslemesi ile Gsdpfxexyttuo Ac Ajtt Saatlik kapasite: 1800 Başlık sayısı: 1 Mantar: şampanya mantarı Tahrik: motor tahrikli Kontrol ünitesi: kontaktör, röle, PLC olmadan

Durumu: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2024, makine/araç numarası: 10000987991, toplam ağırlık: 5.110 kg, yük kapasitesi: 6.300 kg, ana kaldırma hızı: 4.000 mm/dak, kaldırma yüksekliği: 5.200 mm, 6.3t S-DG Double-Girder Overhead Bridge Crane TECHNICAL DETAILS Godpfx Aex Nvlboc Aett Crane rail type: 60 × 40 Load capacity: 6,300 kg Span: 17.100 m Maximum deflection of crane bridge at rated load: 22.8 mm Wire Rope Hoist Maximum lifting capacity, hoist 1: 6,300 kg Hoist classification: 1.2 + 1.2 m (D_min) Lifting height: min. 4.9 m / max. 5.20 m Type of trolley: Double-rail trolley Type of wire rope hoist control: with hook traverse Hook design/size: RSN2.5V Speeds Lifting speed at rated load: min. 0.08 m/min to max. 4.0 m/min CSR speed at partial load: max. 6.00 m/min Trolley travel speed: max. 20 m/min Crane travel speed: max. 40 m/min MACHINE DETAILS Crane weight including hoist: 5,110 kg Electrical Data Mains voltage: 3 Ph / 400 V / 50 Hz Control voltage: 48 V Application: Indoor use Ambient temperature: min. 5 °C to max. 40 °C Motor Output Main hoisting motor: 4.5 kW Duty cycle, main hoisting motor: 60% ED Trolley travel motor: 1 × 0.45 kW Duty cycle trolley travel motor: 40% ED Crane travel motor: 2 × 0.65 kW Duty cycle crane travel motor: 40% ED EQUIPMENT DynADrive inverter control Control Pro Performance 4-step hoist limit switch Hoist brake Wire rope drum Gearbox Overload protection Load spectrum memory Pre-limit and final limit switches for trolley and crane travel (slow/stop) Crane with REMOX516MI radio remote control including signal horn (volume: 98 dB) including spare transmitter for radio remote control including storage cabinet for radio remote control Rope angle features Safety conductor rail approx. 30 m long, mounted on central support row including main disconnect switch and power supply, connection at any point Rising main (fixed cabling) to be provided by customer Note: Additional technical data can be found in the attached quotation.

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 1986, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 8531, Famot MEXPOL TUM 35'in açık artırması! Gjdox Ngnmspfx Ac Astt

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 1998, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 0-250-05-2654, X ekseni hareket mesafesi: 3.950 mm, Y ekseni hareket mesafesi: 1.943 mm, Z ekseni hareket mesafesi: 400 mm, kontrolör modeli: HOMATIC-2000 IPC, No reserve price – guaranteed sale to the highest bidder! The machine is equipped with a C-axis! TECHNICAL DETAILS Travel distances X-axis: 3,950 mm Y-axis: 1,943 mm Z-axis: 400 mm Vertical boring unit X-direction Drilling spindles: 16 Feed stroke Z: 60 mm Drilling depth: max. 38 mm Rotation direction: right/left Spindle speed: 1,500 – 5,900 rpm Drive: 1.5 kW Chuck size: Ø 10 mm Overall length of drill bit: 70 mm Max. drill bit diameter: 20 mm (15 spindles), 1 spindle up to 25 mm, max. 35 mm (1 reinforced spindle) Spindle spacing: 32 mm (15 spindles) Spindle type: individually selectable Extraction: central Vertical boring unit Y-direction Drilling spindles: 15 Feed stroke Z: 60 mm Drive: 1.5 kW Rotation direction: right/left Spindle speed: 1,500 – 5,900 rpm Chuck size: Ø 10 mm Drilling depth: max. 38 mm Overall length of drill bit: 70 mm Max. drill bit diameter: 20 mm, 1 spindle up to 25 mm Spindle spacing: 32 mm (15 spindles) Spindle type: individually selectable Arrangement: Y-direction Horizontal boring unit X-direction Drilling spindles: 4 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotation direction: left Spindle speed: 4,800 rpm Chuck size: Ø 10 mm Overall length of drill bit: 70 mm Max. drill bit diameter: 20 mm Spindles: individually selectable Horizontal boring unit Y-direction Drilling spindles: 2 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotation direction: right Spindle speed: 4,800 rpm Chuck size: Ø 10 mm Overall length of drill bit: 70 mm Max. drill bit diameter: 20 mm Spindle type: individually selectable Milling motor Drive power: 7.5/10 kW (S1/S6 mode) Speed range (stepless): 750 – 18,000 rpm Cooling: recirculating liquid cooling Bearings: hybrid bearings (ceramic) Extraction: central Tool changer magazine Stations: 30 tool stations Tool weight: max. 5 kg Tool change time: approx. 8 – 10 seconds MACHINE DETAILS Control: HOMATIC-2000 IPC Recirculating liquid cooling: 18,000 l/min Power: 7.5 / 10 kW Gtjdpfx Aox Sqm Sjc Ajt S1/S6 mode EQUIPMENT Integrated CNC axis (360° rotatable) Torque support Main spindle (motor output 7.5 / 10 kW, HSK F63) Workpiece support system 1,500 mm Workpiece console K-table 1,500 mm Travelling column extension Y-direction 120 mm Compressed air connection bar with quick couplings Extraction hood for additional router motor Router 5 kW with hydro quick clamping system Safety fence left with door Safety tread mat 3,250 mm Control cabinet left Note: Further details regarding the machine’s equipment can be found in the attached documents.

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2013, Fonksiyonellik: tamamen fonksiyonel, maksimum mil hızı: 6.000 dev/dak, X ekseni hareket mesafesi: 607 mm, Z ekseni hareket mesafesi: 286 mm, kontrolör modeli: Fanuc 32i A, taşlama mili hızı: 30.000 dev/dak, The offer includes a CNC hard turning machine with FMB automation! The machine was manufactured in 2013, but was only commissioned in 2017 (demonstration machine)! HARDINGE GT27SP GG-134HS TECHNICAL DETAILS X-axis travel: 607 mm Z-axis travel: 286 mm Maximum spindle speed: 6,000 rpm Number of axes: 2 MACHINE DETAILS Control: Fanuc 32i A Dimensions & Weight Machine dimensions with robot cell (L x W x H): 4,600 x 1,600 x 2,700 mm Gjdjx I A Hpopfx Ac Astt Weight: approx. 2,100 kg Operating hours: 34,536 h EQUIPMENT MARPOSS measuring system MicroCentric 4-410-3-QC chuck Jäger HF spindle (spindle speed: 30,000 rpm) S400 oil mist filter Spindle cooling possible FMB Unirobot LR Mate (serial number: E-83200 (robot)/ E15X36204 (controller), year of manufacture: 2015) Robot model: FANUC LR MATE 200iD7L-P2TB Controller: FANUC R30iB Maximum part feed: 70 mm Axes: 6 Weight of robot cell: approx. 1,000 kg GENERAL EQUIPMENT Knoll filter system KF110/500 (capacity: 500 l) Grinding spindle fixture RINECK grinding wheel mount Reversing station in robot cell Conveyor belt for raw/finished parts 2,900 mm 2x MAS-MEX20-GT27-1-S385H holders 2x MAS-MEX20 turn sleeves 2x MAS-turn rings 2x Hydraulic expansion chucks for ID boring bars Mount for turning toolholder + turning toolholder MARPOSS probe with mount

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2000, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 1110013, X ekseni hareket mesafesi: 2.000 mm, Y ekseni hareket mesafesi: 1.600 mm, Z ekseni hareket mesafesi: 1.500 mm, masa yükü: 6.000 kg, iş mili çapı: 110 mm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,600 mm Travel Z-axis: 1,500 mm Spindle bore diameter: 110 mm Clamping surface of the table: 1,250 x 1,600 mm Table load capacity: 6,000 kg Gedpfxjx I A D Us Ac Astt MACHINE DETAILS Control system: Heidenhain TNC 426M Note: The tools visible in the images are not included in the scope of sale and delivery.

Durumu: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2011, çalışma saatleri: 34.797 h, makine/araç numarası: 2011-0250, Boru çapı (maks.): 600 mm, Boru uzunluğu (maks.): 1.500 mm, Bükme açısı (maks.): 180 °, bükme yarıçapı (maks.): 200 mm, duvar kalınlığı: 3 mm, Original machine year: 1996. Completely overhauled by the manufacturer in 2011 for approx. EUR 250,000: electrics and mechanics comprehensively renewed. TECHNICAL DETAILS Tube diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Tube loader length: 1,500 mm Bending angle: max. 180° + spring-back Tube length: 400 - 1,500 mm Tube outer diameter: 28 mm - 60 mm Material parameters Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Motion axes Bending direction: left Bending speed forward: max. 22.0 rpm (infinitely variable) Bending speed return: constant 22.0 rpm Rotation angle: max. 360° Rotation speed: 50 rpm Height adjustment for multiple radii: lowest tube center 55 mm Vertical travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control panel (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic oil capacity: 340 l Control system Bending planes: up to 6 (CNC programmable) Positioning unit: NTB version Control unit: Schwarze-Robitec operating and control panel EQUIPMENT - Automatic mandrel tube bending machine - Tube positioning unit Gtsdpfxjx Srklj Ac Aet - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, slide rail, mandrel retraction, reinforced slide rail feed and return - Various bending tools for Ø 60 mm tube - Various accessories - Control cabinet cooling unit - Foot switch (dual) - Schwarze-Robitec control panel - Rittal control cabinet cooling unit type SK 3361100 Note: Machine could only be tested in setup mode due to lack of operating knowledge. No faults known. The machine is currently dismantled.

Durumu: yeni gibi (kullanılmış), Üretim yılı: 2019, Fonksiyonellik: tamamen fonksiyonel, kontrol tipi: PLC kontrollü, Auction of a medical and spice processing line. The line is still in its original packaging and has never been used. The video shows a sample machine. The offered line consists of the following components: ST II VIBRO W LGU 252 VIBRO 14 OGK 1003-A DOUBLE ZIG-ZAG Control: PLC-controlled Processing capacity: 20 plants in 5-6 fractions ST II VIBRO W TECHNICAL DETAILS Screen length: 1,200 mm Screen width: 800 mm Number of screens: 2 Gtodpfxsx Nnaws Ac Ast Screen inclination: min. 5° to max. 10°, continuously adjustable Screen perforation: as per customer requirements MACHINE DETAILS Drive Drive type: vibration motors Motor rating: 2 × 0.18 kW Motor rating: 2 × 0.60 kW Machine weight: approx. 480 kg LGU 252 TECHNICAL DETAILS Number of screens: 2 Screen size: 2,500 × 800 mm Screen perforation: “Peterson” Inclination adjustment: min. 20° to max. 40°, continuously adjustable Conveyor belt with carriers: 600 mm MACHINE DETAILS Dimensions (W × L × H): 5,000 × 1,700 × 3,000 mm Drive Motor rating: 0.75 kW Motor rating: 1.5 kW Motor rating: 1.1 kW Motor rating: 2 × 0.55 kW Operating voltage: 380 V OGK 1003-A TECHNICAL DETAILS Number of screens: 1 Number of knives: 2 Throughput capacity: min. 40 kg/h to max. 100 kg/h MACHINE DETAILS Dimensions & weight Dimensions (W × L × H): 2,440 × 1,914 × 2,525 mm Machine weight: approx. 970 kg Motor rating: 1.1 kW Operating voltage: 380 V DOUBLE ZIG-ZAG TECHNICAL DETAILS Throughput capacity: max. 150 kg/h MACHINE DETAILS Dimensions (L × W × H): 2,400 × 2,000 × 5,000 mm Exhaust fan: 1 GENERAL EQUIPMENT Control panel 208 PLC Aspirator I-6 Control panel 308 Belt conveyors (12 units) Air technology Magnets Speed controller Note: The machine is dismantled and stored (see pictures).

Durumu: yeni gibi (kullanılmış), Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, kontrolör modeli: DC241 EEC, iş parçası yüksekliği (maks.): 3 mm, A ekseni döndürme açısı (maks.): 105 °, B ekseni dönme açısı (maks.): 180 °, As-new Hexagon Global S Blue Coordinate Measuring Machine (CMM)! TECHNICAL DETAILS CMM Interface: TKJ Probe Head Weight: 350 g Total Weight: 480 g Measuring Performance Probing Force: 5 µm Measuring Range: 2 mm Maximum Measuring Distance: 14 mm Z-Axis Resolution: 66 nm Lateral Resolution: 6 µm Angular Acceptance: ±30° Maximum Measurable Thickness: 3 mm Spot Diameter: 12 µm LED Area Light Illuminated Area: 780 × 780 mm Overall Dimensions: approx. 860 × 840 × 20 mm Weight: approx. 19 kg Max Load Capacity: 50 kg Probe Stylus Shank Diameter: 3 mm Shank Length: 50 mm Ruby Ball Diameter: 5 mm Thread: M3 Angular Rotation Steps: 2.5° A-Axis: ±105° B-Axis: ±180° Rotational Speed: 90° in 2.5 s Max. Extension Length: 450 mm Recommended Drive Torque: max. 1.4 Nm Positioning Repeatability: 0.5 µm at 100 mm distance from center of A-axis rotation MACHINE DETAILS Control System: DC241 EEC Controller Compatibility: HH-C-V2.0, HH-CA-V2.0 with HR-R automatic probe changer rack Electrical Data Supply Voltage: DC 5 V to 6 V Typical Current Consumption: 50 mA Minimum Current Consumption: 30 mA Maximum Current Consumption: 150 mA (pulsed) Protection Class: IP40 (IEC 60529) Temperature Range: 16°C to 26°C EQUIPMENT WIN 10 operating system Gsdpfsx Sx Nusx Ac Aott Interactive 3D graphics function Computer-simulated CMM environment Bidirectional interface to CAD systems: IGES, VDA, DXF, and STEP Processing of 2D, 3D, wireframe, and surface models Curve (CurveAnalyzer) and surface scanning Incl. PC-DMIS-SHEETMETAL Functions for measuring thin-walled parts Automatic White Light Probe – TKJ 2.5 HP-OW-2.14 sensor kit, incl. controller and reference sphere, Ø 30 mm, ceramic matte HP-SX1H scanning probe sensor LED area light for mounting onto coordinate measuring machine Mechanical frame for mounting the area light (reference price) HP-CTS5.10 optical sensor HP-S-X1C/H stylus holder (1× M3) HH-C-V2.1 controller HR-OW-2.14 short end cap HR-R3 sensor acceleration HH-CA-V2.0 interface Active probe rack, HR-RA-65 HR-X1-3P stylus rack Calibration sphere, Ø 60 mm, ceramic, with stand M3 stylus (R-5-SS-3.50) Stylus storage Computer & software PC-DMIS CAD++ PC-DMIS Operator Interface combined with system order PC-DMIS CWS Interface PC-DMIS probe change support software PC-DMIS Vision for tactile sensors Touchscreen including PC system Table for PC system

Durumu: yenilenmiş (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2014, çalışma saatleri: 23.000 h, kontrolör modeli: Siemens Sinumerik 840D SL, lazer tipi: fiber lazer, lazer gücü: 5.000 W, çalışma uzunluğu: 3.000 mm, çalışma genişliği: 1.500 mm, The machine was overhauled in 2025! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser type: Fiber laser Laser power: 5,000 W MACHINE DETAILS Control unit: Siemens Sinumerik 840D SL Year of last overhaul: 2025 Laser beam transmission: Fiber optic cable Machine cooling unit: water-to-air Laser cooling unit: air-to-water Operating hours: 23,000 h EQUIPMENT CE marking Gjdpfx Acex Tuk De Astt Nozzle changer Cooling unit Emergency stop switch Safety light barrier Dust extraction Machine frame with integrated control cabinet Automatic longitudinal pallet changer Axis drive with linear motor and torque motor technology Integrated control cabinet lighting Central main switch Longitudinal chip conveyor Working area lighting Laser positioning diode Oil vaporization unit PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Transport and positioning device Universal laser cutting head with adaptive lens system Single-head strategy Cutting head protective window Online monitoring of protective window ControlLine Automatic downtime Programmable cutting gas pressure control FastLine FlyLine AdjustLine Remote maintenance via Internet Simple workshop programming Copper processing package Brass processing package Micro welding Multi-sheet processing Condition Guide USB interface RJ-45 network card Central connection Segmented extraction system Compact dust extractor Machine enclosure with protective windows Electrically opening roof Commissioning Network configuration via remote maintenance Solid-state laser TruDisk 5001 (5 kW) with fiber output DetectLine Machine layout: right side Interface for LiftMaster Compact

Durumu: mükemmel (kullanılmış), Üretim yılı: 2010, Fonksiyonellik: tamamen fonksiyonel, iş parçası yüksekliği (maks.): 60 mm, kenar kalınlığı (maks.): 20 mm, iş parçası genişliği (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Glued edge thickness: max. 20 mm Maximum gluing height: 60 mm Gedsx Tqgbepfx Ac Aett Maximum roll material thickness: 3 mm Piece width: min. 60 mm Maximum feed speed: up to 25 m/min Feed: continuous Electric height adjustment: available Pressure: top belt pressure Preheating zone: available Granulate glue system: with prefabricated container Glue pot: interchangeable/variable Spraying device: available Pre-milling unit: available Trimming unit: with 2 motors Milling stations: flush/radial/chamfered, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left side Quick-change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special equipment: with nesting - new chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue application unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile scraper - HOMAG FA 11 finishing unit

Durumu: yeni, Üretim yılı: 2025, The TRM Series Turbo Mills is an advanced grinding system used primarily in the recycling of electronic boards and cables for the effective crushing and grinding of these materials. Plastics, metals, and other components found in electronic boards and cables are reduced to fine particles and transformed into recyclable raw materials thanks to this machine. With its high-speed rotors, the Turbo Mill carries out the grinding process, reducing materials to micron sizes through friction and impact forces. ✅ Superior Grinding Performance – Friction & impact forces ensure ultra-fine particle sizes. ✅ High-Speed Rotors – Maximum efficiency in material reduction. ✅ Durable & High-Efficiency – Designed for continuous, long-term operation. ✅ Eco-Friendly & Sustainable – Ideal for electronic waste recycling. Gtodev Hm S Iepfx Ac Aot 🔸 Choose the Right Model for Your Needs! Technical Specifications 🔹 TRM S1 Power: 15 kW Rotor Diameter: 380 mm Length: 1420 mm Width: 700 mm Height: 700 mm Weight: 660 kg 🔹 TRM M1 Power: 30 kW Rotor Diameter: 500 mm Length: 1680 mm Width: 820 mm Height: 920 mm Weight: 870 kg 🔹 TRM L1 Power: 45 kW Rotor Diameter: 620 mm Length: 1790 mm Width: 940 mm Height: 1040 mm Weight: 1000 kg

Durumu: yeni, Üretim yılı: 2025, - TFON Kantenabrundungs- & Oberflächenbearbeitungssystem. Dieses System wurde für überlegene Vielseitigkeit und höchste Präzision entwickelt und verarbeitet Baustahl, Aluminium und Edelstahl mit Materialstärken von 0 bis 120 mm. Es bietet fortschrittliche Kantenabrundung und Oberflächenreinigung, speziell ausgelegt für anspruchsvolle industrielle Einsätze. - Materialkompatibilität - Baustahl, Aluminium, Edelstahl - Bearbeitungsdickenbereich - 0 – 120 mm Kantenabrundung: Radius 2 Kantenabrundung für glatte, sichere Kanten, die sowohl das Erscheinungsbild als auch die Funktionalität verbessern. Präzisionssteuerung: Integriertes Siemens-Automationssystem sorgt für präzise und gleichbleibende Steuerung während des gesamten Bearbeitungsprozesses. Unabhängige Bearbeitungsstationen: Mehrere Stationen ermöglichen simultane oder sequenzielle Bearbeitung und bieten flexible Ablaufgestaltungen. Tischgrößen-Optionen: Erhältlich mit Arbeitsbreiten von 650 mm, 1000 mm oder 1300 mm, passend für unterschiedlichste Produktionsanforderungen. Tischtypen: Magnet-, Vakuum- oder Magnet-Vakuumtische bieten sicheren und adaptiven Halt für unterschiedliche Materialien und Bauteilgrößen. Plasma- & Sauerstofftechnik: Modernste Plasma- und Sauerstoffsysteme entfernen effizient starke Grate und Schlacke nach dem Zuschnitt und sorgen für saubere Oberflächen. Oberflächenreinigung: Entfernt effektiv Verschmutzungen, Rost, Oxide und Zunder und bereitet Bauteile optimal für weitere Bearbeitungsschritte wie Schweißen oder Beschichten vor. Kantenabrundung für Beschichtung: Erzeugt gleichmäßige, fehlerfreie Kanten, perfekt für Lackier- und Beschichtungsanwendungen. Einsatzbereiche: Stahl-Service-Center, Energie, Bergbau, Bauwesen, Automobilindustrie — konzipiert für anspruchsvollen, industriellen Dauereinsatz. Gleichmäßige Kantenqualität: 8 Lamellenräder sorgen für konstant saubere Radiuskanten an jedem Bauteil. Pneumatisches Oszillationssystem: Verlängert die Lebensdauer der Schleifbänder und sichert gleichbleibende Leistung durch verschleißmindernde, pneumatisch gesteuerte Oszillation. Godpfx Acji E Tkas Aott Für industrielle Präzision konstruiert. Auf Langlebigkeit ausgelegt. Für vielseitige Anwendungen entwickelt. TFON – Exzellenz in Kantenbearbeitung und Oberflächenvorbereitung.

Durumu: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, Donanım: dokümantasyon / kılavuz, Wir fertigen die „R-PRO 25“ Doppelstehfalz-Profiliermaschine mit höchster Präzision auf modernsten CNC-Bearbeitungszentren. Mit der benutzerfreundlichen, starken, langlebigen und robusten „R-PRO 25“ Stehfalz-Profiliermaschine können Sie Ihre Stehfalzeinsätze qualitätsorientiert ausführen. Als REIS STANDING SEAM TECHNOLOGIES unterstützen wir unsere Kunden stets mit lagernden Ersatzteilen – von der Produktion bis zur Montage, vom Verkauf bis zum technischen Service. MAXIMALE MOBILITÄT ZU GERINGEN KOSTEN Große, schwere und kostenintensive Stehfalz-Profiliermaschinen sind überflüssig, wenn Sie die R-PRO 25 Stehfalz-Profiliermaschine einsetzen. Mit unserer mobilen Stehfalzmaschine ist die hochpräzise Produktion von Stehfalzprofilen in beliebiger Länge möglich. Gjdpfohpuhtox Ac Aett QUALITÄT UND VERTRAUEN – REIS STANDING SEAM TECHNOLOGIES Jede „R-PRO 25“ Stehfalzmaschine durchläuft sorgfältige Prüfungen. Einfache Wartung CE-Zertifikat EU-Konformitätsbescheinigung ISO 9001 DIN EN 349 DIN EN 1037 DIN EN ISO 12100-1/2 DIN EN 13849-1 DIN EN ISO 13850 DIN EN ISO 13857 DIN EN 14121-1 DIN EN 60204-1 2 Jahre Garantie Starke Geschäftsleitung. Loyal, hochqualifiziertes Team. "R-PRO 25" Eigenschaften - Standard Stehfalzhöhe: 25 mm - Gewicht: 195 kg - Transport mit Kleinwagen möglich - Leicht auf das Dach hebbar - Kann für den einfachen Transport in vier Teile zerlegt werden (Standard) - Kabelgebundene Fernbedienung (Standard) - Not-Aus-Taster (Standard) - Vorwärts- und Rückwärtslauf-Taste (Standard) - Materialbreiten-Verstellung (250 mm – 700 mm) (Standard) - Rollen mit Feststellfunktion (Standard) - Sickenaufsätze (optional) - Digitaler Encoder (optional) - Kreissäge (optional) - Guillotine-Schere (optional) - Schiebeschere (optional) Bitte kontaktieren Sie uns für weitere Informationen und Preise...

Durumu: yeni, Üretim yılı: 2025, ZGE60 - 60Lt Vibrasyonlu Sieving Machine * Changable Sieving System Gtjdpfx Acsw Hpfvs Aot *0,34 Kw vibratory motor *Start/Stop termic switch It is used to automatically separate the abrasive/polishing stones and the material from each other after the deburring and/or polishing process in vibration machines which not have sieving system.

Durumu: kullanılmış, New: Yes Usable Material: Bitumen Unladen weight: 18,000 kg Fully automatic polymer modification plant TECHNICAL SPECIFICATIONS Grinding and homogenizing of polymer (SBS, APP, KRATON, etc.) and bitumen. Feed: bitumen-polymer premix Flow rate: max. 15 t/h Density: 1.1 g/cm³ Viscosity: max. 20,000 mPa s (cP) Temperature: 190 °C. Solid material: Machine inlet: max. 3–6 mm Machine outlet: max. 0.2 mm MOTOR 130 kW Speed 3,000 min-1 Voltage 400 V, 50 Hz, 3 phases Start method Y / Δ 2. VERTICAL MIXING TANK Frame: - Manufactured as a vertical rectangular profile. - Built to dimensions with a capacity of 11 m³. - The tank body is made from 5 mm St37-grade steel plate. - The bitumen fill pipe consists of 3" DN80, PN16, DIN2633 1 unit; the discharge pipe consists of 3" DN150, PN16, DIN2633 and 3" DN80, PN16, DIN2633 2 units. - The inspection cover measures 500 x 500 mm. Gtodpfjx D Df Njx Ac Ast b) Heating - Heated externally with diathermic hot oil. - Leak test conducted at not less than 6 bar. c) Insulation - 100 mm rapid wire mesh rock wool in compliance with Turkish Standards Institute (TSE). - External surface is made of stainless steel sheet, custom produced to tank dimensions. d) Mixing system - 2 x 7.5 kW agitator motors, 60 rpm - Chain-driven - Sealed at the drive unit for leak tightness - Bearings by SKF or FAG - Fixed blades mounted on the tank interior walls to enhance dispersion and achieve a homogeneous mixture e) Temperature indicators are digital and analogue with two outputs each. f) Integrated connection paddles, ladders, and platform included. 3. BITUMEN PUMPS - 2 ½ XLA type with oil heating - Pump capacity: 25 t/h bitumen pumps - Coupled with a 7.5 kW, 400 rpm gearmotor 4. SBS FEED UNIT (POLYMER MODIFIED GRANULES) a) Feed hopper - Slot width of 500 x 500 mm - Manufactured from 4 mm plate - Mounted with granule feed, 30 m³/h capacity, in the feed helix - Frame with 5 mm wall thickness, pipe diameter 220 mm - Leak tightness at the drive end - Bearings by SKF or FAG - 5.5 kW, 80 rpm gear motor with coupling drive 5. PIPEWORK AND EQUIPMENT a) Pipes - Steel pipes according to DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25) - Mill line built with 3" internal pipe and 4" outer jacket pipe - Jacket pipes welded to TSE standards - Bypass pipes at appropriate locations in 1" diameter b) Compensators - DN 50, DN 80, PN 16, for 400°C c) 3-way and 2-way heated valves - Conforms to TSE standards - Pneumatic control - For operation under high pressure (16 bar) and temperature (230°C) d) Hot oil valves - KLINGER or THERMO brand piston hot oil valves used - Dimensions: DN 25 PN16, DN65 PN16, DN50 PN16, etc.

Durumu: yeni, Üretim yılı: 2025, toplam ağırlık: 700 kg, güç: 17 kW (23,11 bg), Mizar Zig-Zag Separators are designed to efficiently separate light and heavy materials using an air-based zig-zag flow system. This advanced technology ensures a high level of precision in material separation, making it ideal for plastic, metal, and composite recycling processes. ✅ Efficient Airflow Technology – Effectively separates materials based on weight and density. ✅ High Precision & Consistency – Ensures accurate sorting for optimal recycling results. ✅ Energy-Efficient & Durable – Designed for long-term industrial use. ✅ Easy Integration – Compatible with existing recycling systems. Godpsv Hm I Nefx Ac Ajtt 🔸 Technical Specifications 🔹 ZZS A1 Power: 17 kW Length: 2000 mm Width: 1250 mm Height: 4180 mm Weight: 700 kg

Durumu: yeni, Üretim yılı: 2025, -Individuell angefertigte Maschinen, abgestimmt auf Ihre Produktionsanforderungen -Unsere Sondermaschinen werden präzise konzipiert und konstruiert, um den spezifischen Anforderungen Ihrer Fertigungsprozesse gerecht zu werden. Ob Ihr Schwerpunkt auf der Oberflächenbearbeitung, Oxidentfernung oder Kantenverrundung liegt – diese Maschinen garantieren höchste Präzision und Leistung. -Oberflächenbearbeitung: Erzielen Sie gleichmäßig hochwertige Oberflächen bei unterschiedlichsten Werkstoffen und gewährleisten Sie somit ein dauerhaft professionelles und ansprechendes Erscheinungsbild. -Oxidentfernung: Entfernen Sie effektiv Oberflächenoxide, um eine saubere und kontaminationsfreie Oberfläche zu erhalten – eine Grundvoraussetzung für nachfolgende Verarbeitungs- oder Beschichtungsschritte. -Kantenverrundung: Verrunden Sie Kanten exakt nach Ihren Vorgaben, um sowohl die Arbeitssicherheit als auch die Qualität des Endprodukts zu erhöhen. Individuelle Anpassungsoptionen Jede Maschine wird exakt auf Ihre Anforderungen abgestimmt und bietet flexible Optionen in Bezug auf: Gtodpshq Dbxofx Ac Ajt Bearbeitungsgeschwindigkeiten: Variabel einstellbar zur Anpassung an unterschiedliche Produktionsanforderungen Sonderausstattungen: Wählbar sind u.a. Absaug- und Filtersysteme, einstellbare Anpressdruckregelungen sowie programmierbare Steuerungskonzepte zur Optimierung Ihrer Arbeitsabläufe Robust und langlebig. Unsere speziell gefertigten Maschinen sind auf eine lange Lebensdauer ausgelegt und gewährleisten einen zuverlässigen Betrieb selbst bei hohen Produktionsvolumina. Egal ob für Kleinserien oder den industriellen Dauereinsatz – Jahr für Jahr liefern diese Anlagen erstklassige Resultate.

Durumu: yeni, Unladen weight: 240,000 kg Cargo area capacity: 3,000,000 l FULLY AUTOMATIC ASPHALT PLANT 1.1 AGGREGATE BUNKERS (6 x 12 m³) 6 pcs 1.2 Bunker and dosing belts 1+1 feed 1.3 Distributor and dryer mounted on conveyor belt 1 pc 1.4 STATIONARY CHASSIS 1 pc 1.5 ROTARY DRYER UNIT 1 pc 1.6 Dryer drum 1 pc 1.7 Common inlet 1 pc 1.8 Common outlet 1 pc 1.9 Burner unit (BALTUR) 1 set 1.10 Burner fuel pump 1 pc 1.11 Burner blower 1 pc 1.12 Elevator inlet 1 pc 2.1 MIXER CHASSIS UNIT 1 pc 2.2 Asphalt mixer + hot aggregate elevator 1 pc 2.3 Common weighing hopper 1 pc 2.4 Loading crane and weighing vessel 1 pc 2.5 Screw conveyor for loading 1 pc 2.6 Bitumen weighing vessel 1 pc 2.7 Bitumen pump mixer 1 pc 2.8 Hot silo (50 t) 3 pcs 2.9 Silo for stock filling 25 m³ 2 pcs 2.10 Vibrating screen 1 pc 3 DUST COLLECTION FILTER 3.1 Jet-pulse filter housing 1 set 3.2 Nomex filter bags and cartridges 1 set 3.3 V spiral dust collector and 1+1 bunker set 3.4 Filling silo (25 t) 2 sets 3.5 Set of screw conveyors for loading 2 pcs 3.6 Filter suction fan 1 set Gsdex D Dfijpfx Ac Astt 3.7 Set 1 for contaminated gas duct 3.8 Housing group set 1 pc 4 BITUMEN TANK 4.1 Insulated bitumen tank for oil heating, 50 t capacity (one for PMB) with mixer (vertical), 3 sets 4.2 3-way pneumatic lining valve group 2 sets 4.3 Bitumen pump mixer 1 set 4.5 Metering line for the mixer's bitumen balance 1 set 4.6 Bitumen transfer pump 1 set 4.7 Double-walled bitumen pipe installation 1 set 4.8 Bitumen tank for heating oil, 50 t capacity for hot oil 1 set 4.9 Three-way valve group 2 with pneumatic lining set 5 CHASSIS FOR FUEL AND THERMAL OIL GROUPS 5.1 Thermal oil heater, capacity 1,000,000 kcal/h, 1 set 5.2 Oil boiler 1 set 5.3 Feed oil circulation pump 1 set 5.4 Fuel pump 1 set 5.5 Fuel pump 1 set 5.6 Automation compressor for cabin control software 1 set 6 Granulate feeding system (fractional feed with fan drive) 1 set 7. Cold asphalt recycling system (5 m³ hopper, 500x22,000 mm belt conveyor, 800x4,000 mm belt conveyor with weighing system) 1 set 8. Lining (3 mm layer on 50x50 profile sheeting) for aggregate tank and mixer floor 1 set 9. Real-time gas emission measurement and monitoring system (integrated in PLC and plant automation) (available via internet connection) 1 set 10. Dust monitoring PCE-PQC 23US incl. calibration certificate 1 set

Durumu: yeni, Üretim yılı: 2025, -TFON Präzisions-Kantenverrundungs- und Finishsystem. -Entwickelt für erstklassige Oberflächenbearbeitung und Kantenverrundung bei einer Vielzahl von Materialien und Branchen, kombiniert das TFON-System modernste Automatisierung mit vielseitigen Konfigurationsmöglichkeiten, um exakt auf Ihre Produktionsanforderungen einzugehen. Materialkompatibilität: Geeignet für Aluminium, Edelstahl und Baustahl. Großer Dickenbereich: Verarbeitet Materialien effizient von 0 bis 120 mm Dicke. Exzellente Finishergebnisse: Konzipiert für hochwertige Oberflächenveredelungen zur Steigerung von Produktästhetik und Funktionalität. Industrielle Vielseitigkeit: Ideal für die Medizintechnik, Großküchentechnik, Automobilzulieferindustrie sowie für Metallzubehör. Kantenverrundungspräzision: Erzeugt exakte Radius 2-Kantenverrundungen, erhöht die Sicherheit und verbessert das Erscheinungsbild des Endprodukts. Fortschrittliche Automatisierung: Das integrierte Siemens-Steuerungssystem sorgt für höchste Präzision und zuverlässigen Betrieb. Unabhängige Bearbeitungsstationen: Ermöglichen flexible und effiziente Mehrstufenbearbeitung, angepasst an komplexe Produktionsabläufe. Verschiedene Tischbreiten verfügbar: Erhältlich mit 650 mm, 1000 mm oder 1300 mm Tischbreite zur optimalen Anpassung an Ihre Produktionsbedingungen. Individuell wählbare Förderbandoptionen: Wählen Sie zwischen Vakuum-, halbmagnetischen oder halb-Vakuum-Fördersystemen für eine sichere und schonende Werkstückführung. Oberflächenreinigung: Entfernt effektiv Rost, Oxidschichten und Verunreinigungen zur optimalen Vorbereitung für nachfolgende Bearbeitungsschritte. Erhöhte Bedienersicherheit: Die Kantenverrundungsstation reduziert das Schnitt- und Verletzungsrisiko durch scharfe Kanten. Godpfxjhq A Txs Ac Aett Leistungsstarkes Finish: Ausgestattet mit Scotch-Abrasivtechnologie für gleichmäßige und glatte Oberflächen. Längere Standzeit der Schleifmittel: Das pneumatische Oszillationssystem maximiert die Lebensdauer von Schleifband und Scotch-Abbrasiv, wodurch Stillstandszeiten reduziert werden. Konstante Radienausgabe: Sechs Lamellenräder gewährleisten gleichmäßige Kantenradien für eine stets reproduzierbare Produktqualität. Entwickelt für Performance. Konzipiert für Sicherheit. Gebaut für industrielle Vielseitigkeit. TFON – Perfektion in der Oberflächenbearbeitung, jedes Mal.

Durumu: yeni, Curb weight: 16,000 kg Fully automatic bitumen emulsion system 1. COLLOID MILL (10 m3 / hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEED PUMP 1 4. FOAM SYSTEM 1 5. PIPEWORK AND EQUIPMENT 1 6. CONTROL PANEL 1 7. CHASSIS 1 FOAM TANK (1 unit) Frame: - Box section - Capacity: 5 m3 - The tank body is made from 3 mm stainless steel plate, AISI 304 Gtjdpfx Aex D Dd Sec Ajt - Weld seams are made using appropriate WIG stainless steel welding b) Heating: - 2-inch stainless steel pipe - The oil inlet and outlet pipes are 1 inch DN50, PN16, DIN 2633 - Leak test is conducted at 6 bar pressure. c) Mixing system: - 3 kW, 60 rpm mixing motor - Drive is outfitted with sprockets - Leak-tightness is ensured at the seals. - Bearings are SKF or FAG. - The fixed paddles on the outer walls are mounted to provide increased dispersion and a homogeneous structure. d) Temperature indicators are both digital and analog, and two outputs are provided. - The capacity of the bitumen pump is max. 8 m3/h - Driven by a 7.5 kW, 400 rpm gearmotor. - The bitumen meter is a system with a capacity of 10 m3/h. a) Pipes: - Made of steel according to DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25). - The mill line consists of an internal 1.5-inch pipe and an external 2-inch jacket pipe. - Jacket pipes are welded according to TSE standards. - Bypass pipes are made as 0.5 inch at appropriate points. b) Expansion joints: - DN 50, DN 80, PN 16 to 200 °C. c) 3-way and 2-way heated valves: - Conforming to TSE standards. - Suitable for working conditions under high pressure (16 bar) and temperature (230 °C) d) Hot oil valves: - Hot oil valves by KLINGER or THERMO brand. Heat resistant. - Sizes: DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter: - Made with a 3 mm wire inner container; designed for frequent and easy cleaning. - The panel is compiled in an IC-standard design.

Durumu: yeni, Üretim yılı: 2025, -Tfon Bevel Wizard® Linear -Präzises Anfasen für lineare und nicht-lineare Anwendungen. Der TFON Bevel Wizard® Linear ist eine Hochleistungs-Anfasmaschine, die außergewöhnliche Genauigkeit sowohl an geraden als auch an konturierten Blechkanten bietet. Diese Maschine wurde für maximale Flexibilität entwickelt und verfügt über ein fortschrittliches Trace Tracking System, das sich automatisch an unterschiedliche Materialstärken und -geometrien anpasst. Dadurch wird eine präzise und gleichbleibende Kantenbearbeitung auch bei komplexen Werkstücken gewährleistet. -Hauptmerkmale 🔹 Fortschrittliches Trace Tracking System: Erkennt und passt sich intelligent in Echtzeit unterschiedlichsten Kantenformen und -konturen an. 🔹 Großer Anfasbereich: Einstellbare Anfaswinkel von -30° bis +80°, ideal für ein breites Einsatzspektrum. - Optimiert für große Werkstücke Verarbeitet Materialien bis zu 12.000 mm Länge und 100 mm Stärke. - Industrietaugliche Langlebigkeit: Robuster 10.000-kg-Rahmen für dauerhafte Zuverlässigkeit. 🔹 Überragende Oberflächengüte: Erzielt erstklassige Ergebnisse durch konstante Schleifbandgeschwindigkeit von 30 m/min und Kontaktrolle Ø135 mm. -Technische Daten: Anfaswinkel: -30° bis +80° Materialstärke: 4 – 100 mm Minimale Materialbreite: 250 mm Minimale Materiallänge: 250 mm Gjdjrt Tpnepfx Ac Astt Maximale Materiallänge: 12.000 mm Werkstück-Vorschubgeschwindigkeit: 1,5 – 5 m/min Bearbeitungsgeschwindigkeit: 3 Meter/Tag Maximale Werkstück-Vertiefung: Ø400 mm Schleifband-Geschwindigkeit: 30 m/min Durchmesser Kontaktrolle: Ø135 mm Durchmesser Schleifbandtrommel: Ø400 mm Maschinengewicht: 10.000 kg Konstruiert für Präzision. Gebaut für Höchstleistung. Entwickelt für die Industrie. Tfon Bevel Wizard® Linear – wo Genauigkeit auf Effizienz trifft.

Durumu: yeni, Unladen weight: 120,000 kg Cargo compartment volume: 160,000 l STANDARD CONDITIONS The plant is designed for the production of 160 t/h of road mix with a finished product at an initial moisture content of 4% and 160°C under the following standard conditions: • Aggregate temperature at dryer inlet: 10°C. • Sea level altitude Gsdpfex D Dbqsx Ac Ajtt • Average density of the feed aggregates: 1,650 kg/m³ • Heavy fuel oil No. 6 calorific value ≥ 9,200 kCal/kg • Heavy fuel oil No. 4 calorific value ≥ 9,700 kCal/kg • Calorific value for diesel oil ≥ 10,200 kCal/kg • Natural gas calorific value ≥ 7,600 kCal/kg • Temperature rise of hot aggregates: 160 K • Residual moisture content in mix: 0.3% • Max. aggregate size: 40 mm • Material pass-through sieve 3 mm: 35% • Material is non-porous and non-hygroscopic with regular shape • Production tolerance rate as per environmental and parameter conditions: ±4% COLD AGGREGATE BUNKERS • Four cold aggregate hoppers made of 5 mm St 37-grade steel plate are required, each approximately 20 m³ in size and manufactured separately. • The hoppers must be fitted with 800 mm upper extensions made from 6 mm steel to prevent overflow of material. • Discharge of material from the hoppers must be achieved with a moving feeder assembly. • Material flow from each hopper must be optionally frequency-controlled (speed-controlled) and adjustable via the computer screen. • The discharge rate of each hopper can be set via manual gate levers, which must be available on every hopper. • A warning system must be present if the aggregate in the hopper runs out, with a warning sign displayed on the operator screen. • A vibrator motor, controlled from the operator screen, must be installed to facilitate material flow and prevent blockages in hoppers containing fine materials. • A conveyor belt system must be installed beneath each hopper to ensure safe material transfer. • Each hopper must be equipped with modular grids made from 10x50 plates with a 10 mm bar diameter. • Silo loading width must be 3000x2400 mm. • An emergency pull-cord shutdown system must be in place. • Possible malfunctions of the belts must be displayed on the operator screen. 2. SUB-HOPPER COLD AGGREGATE COLLECTOR BELT • The horizontal belt must transfer material taken separately from each hopper in a controlled fashion to the inclined dryer feed belt, and be capable of supplying material to a plant with a capacity of 160 t/h. • The rubber belt must be 10 mm thick, 800 mm wide, 4-ply EP 125-grade fabric. • The belt's start/stop operation must be controllable via the operator screen. To empty hoppers at season’s end, the belt must be capable of reverse operation independently of the other units. • The horizontal conveyor frame must be constructed from structural steel, ensuring smooth operation and including a belt tensioning system. • The belt must be equipped with a stripping system at both ends. • The drive drum must be rubber-coated and have a 1-degree angle. • For emergencies...

Durumu: kullanılmış, New: Yes Color: Silver Usable Material: Bitumen Unladen Weight: 9,500 kg Cargo Space Capacity: 50,000 l BITUMEN TANK (50 TONS) • The tank capacity must be 50 tons. • The tanks must be manufactured in accordance with TSE practices and Highway Commission standards. • The tank must be equipped with a thermal oil heating system. • Seamless coil pipe system for heating • Bitumen temperature up to mixing temperature • The fuel tank must include a level and temperature indicator, suction nozzle, filler opening, and ventilation system, inspection hatch, and drain. • Support legs must be provided under the tank, and its surface must be insulated with 50 mm rock wool and covered with 0.80 mm galvanized sheet metal. 1. THERMAL OIL GENERATOR • The generator capacity must be 2,000,000 kcal/h. • The system must be designed for diesel fuel operation. • The generator must include a 1,500 l filling tank. • The generator must be horizontal, equipped with a seamless steel-drawn hot oil pipe, double-walled and of circulation type. Gtsdpfxex D Dbko Ac Aot • The generator body must be insulated with 100 mm rock wool and covered with aluminum sheet metal. • The generator system must be manufactured to production standards and must include a compensating tank, degasser, oil filter, valves and a fully automatic ignition-controlled burner, control panel, pump, and necessary safety equipment. • The coil consists of at least 30 m² of seamless steel tubing. • The generator must be equipped with an integrated warning system to protect the entire system against hazardous situations caused by hot oil level or low heat transfer oil. • The burner system must be automatically activated depending on the set operating temperature of the heat transfer oil. • The system must be supplied as a complete package.