Kullanılmış Preset satın al (334)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
İtalya
2.465 km
HANNSA YL 850 B
HANNSAYL 850 B
Çağrı
Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2016, X ekseni hareket mesafesi: 850 mm, Y ekseni hareket mesafesi: 500 mm, Z ekseni hareket mesafesi: 500 mm, kontrolör üreticisi: FANUC, kontrolör modeli: 0I-MF, masa yükü: 500 kg, maksimum mil hızı: 10.000 dev/dak, mil motoru gücü: 11.000 W, takım magazinindeki yuva sayısı: 24, eksen sayısı: 4, Bu 4 eksenli HANNSA YL 850 B 2016 yılında üretilmiştir. X ekseni hareketi 850 mm, Y ekseni hareketi 500 mm ve Z ekseni hareketi 500 mm'dir. Makine bir FANUC 0I-MF CNC, 10.000 rpm iş mili hızı ve 500 kg maksimum tabla yükü ile donatılmıştır. Yüksek kaliteli işleme yetenekleri elde etmek istiyorsanız, satılık HANNSA YL 850 B dik işleme merkezini düşünün. Daha fazla bilgi için bizimle iletişime geçin.
• Dahili iş mili soğutma sıvısı: 20 bar
• Dahili soğutma
Ek ekipman
• 4. eksen tablası, 200 mm plaka (sürekli 4. eksen)
• Vidalı tip talaş konveyörü
Credpfx Aley Nmnascsb
• Masa kenarında takım ön ayarı
Technical Specification
Taper Size BT 40
Küçük ilan
Poznań
2.054 km
Dornow
DORNOW20M-AT-MS
Çağrı
Üretim yılı: 2020, Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, For sale: Dornow Potato Peeling Line (Year of manufacture: 2020)
Used until August 2023 – in very good condition, fully operational.
Line components:
• Storage hopper with conveyor belt (capacity approx. 1 t of raw material)
• Potato peeler with knives, model 20M-AT-MS
• Roller inspection table with removable tuber rinsing unit
• Pre-washer with belt conveyors
• Conditioning and packing unit with discharge belt, dosing belt, dewatering section and rinsing nozzles (air and water)
• Single-chamber vacuum packing machine (chamber dimensions: 600 x 400 mm, vacuum pump capacity: 60 m³/h)
• Additional new sets of blades for the peeler included. This line can also process beets and celeriac, and, with extended peeling time, also carrots. At extra charge, we can provide: (slicer, metal detector... on request)
Technical specifications:
• Automatic processing sequence:
o Conveyor fills the peeler from the hopper after a set, adjustable time
o Peeling time is steplessly adjustable
o Peeled potatoes are delivered to the inspection table, then the cycle restarts
• Capacity: approx. 300 – 1,000 kg of raw material/hour, depending on potato quality and size
• Peeler:
o Capacity: approx. 40 kg of raw material (optimal loading: approx. 25 kg for best results)
o Peeling with minimal water consumption thanks to flat jet nozzle
• Storage capacity in conditioning and packing unit: approx. 120 kg of peeled potatoes
Condition:
• Very well maintained, used until August 2023
• Available for inspection on site by prior arrangement
Complete line documentation available
Csdpow Sfg Ejfx Alcorb
Küçük ilan
Volkach
2.313 km
Horizon VAC-60Ha VAC-60Hm ST-40 SPF-200A FC-200A
HorizonSPF models
Çağrı
Koşul: ikinci el, Üretim yılı: 2007, The offer includes:
- Air Suction Collator VAC-60Ha
- Air Suction Collator VAC-60Hm
- Horizontal Conveyor ST-40
- Stitcher and Folding Machine SPF-200A
- Side Corner Stitching Module SSK-200
- Face Trimmer FC-200A
- Long Conveyor LC-200
Horizon VAC-60Ha / VAC-60Hm
Air Suction Collators
- Technology: Touch & Work
- Model: Air Suction Collator
- Bins: 6
- Error Prevention: Monitoring for missfeed, double feed, and jams
- Job Memory: 9 memory slots for repeat jobs
- Expandable: Up to 6 collators (36 bins)
Programs:
- Dual Cycle (non-stop operation)
- Feeding (single and double)
- Booklet making program
- Block program
- Selective sorting
- Sheet size: max. 500 x 350 mm; min. 148 x 120 mm
- Paper weight: 40–250 g/m²
- Feed height: 130 mm/bin
- Production speed: max. 9,500 cycles/h
- Power supply: 230 V; 50/60 Hz – 1.86 kW
- Dimensions: 842 x 652 x 1,961 mm
- Weight: 310 kg each
Horizon ST-40 incl. ST-CV
Output Tray + Horizontal Conveyor
- Advantage: Enables non-stop operation despite feed and double feed error control
- Dimensions: 1,300 x 700 x 950 mm
- Weight: 126 kg
Horizon SPF-200A
Stitching and Folding Machine:
- Format setting: fully automatic
Crjdsy H A T Hopfx Alcob
- DIN formats and standard folding patterns: preset
- Job memory: 200 memory slots for repeat jobs
- Stitching heads: 2 – expandable up to 4 stitching heads
- Stitching options: saddle stitching (side and corner stitching available as optional extras)
- Loop stitching: possible with loop stitching heads
- Feed size:
max. 508 x 356 mm;
min. 180 x 105 mm
- Processing capacity:
max. 25 sheets (80 g/m²)
- Stitching pitch: min. 73 mm
- Stitching wire: 26–28
- Production speed: max. 4,800 booklets/hour
- Power supply: 230 V / 50 Hz – 0.68 kW
- Dimensions: 1,625 x 810 x 1,070 mm
- Weight: 500 kg
Horizon FC-200A
Face Trimmer:
- Ejection of defective sets
- Booklet size:
max. 250 x 20 mm
min. 85 mm
- Cutting thickness:
max. 100 sheets (80 g/m²)
min. 4 sheets
- Production speed: max. 4,000 booklets/h
- Power: 230 V / 50 Hz – 0.55 kW
- Dimensions: 655 x 810 x 1,070 mm
- Weight: 245 kg
We can also arrange the following for you:
Packaging, loading, transport (by ship or airfreight), including customs clearance.

Şimdi bilgi alın
+44 20 806 810 84
+44 20 806 810 84
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Avusturya
2.465 km
HAAS ST-20
HAASST-20
Çağrı
Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2019, çalışma saatleri: 11.111 h, maksimum mil hızı: 4.000 dev/dak, kontrolör üreticisi: HAAS, kontrolör modeli: n/a, Bu HAAS ST-20 2019 yılında üretilmiştir. 210mm hidrolik tahrikli aynaya, 12 takım istasyonlu bir VDI tarete ve 4.000 rpm iş mili hızına sahip sağlam bir yatay tornalama makinesidir. Maksimum 330 x 572 mm yükü ve 64 mm'ye kadar çubuk çaplarını destekler. Hassas tornalama işlemleri için idealdir. Bu makine hakkında daha fazla bilgi için bize ulaşın.
Ek ekipman
• Ek Seçenekler: Tahrikli 4000 rpm takım ve C ekseni, 12 istasyon BMT65, Otomatik takım ön ayar kolu
• Özellikler: Menteşeli bantlı talaş konveyörü, Torna parçaları tutucu
• Soğutma Sistemi: 208 l soğutma sıvısı deposu, Değişken soğutma sıvısı akışı
• Diğer Özellikler: Görsel parça programlama sistemi (1GB), Hidrolik tahrikli 210mm ayna A2-6, Elektrik kesintisi için erken algılama modülü, Senkronize kılavuz çekme, güvenli çalışma, Kontrol dokunmatik ekranı, Ethernet, HaasConnect, HaasDrop, M130, WLAN
• Ek Özellikler: Makrolar, SOM
Crodpfsx D Ezfsx Alcjb
Makine Avantajları
Teknik Makine Avantajları
• Maksimum yük kapasitesi: 330 x 572 mm / çubuklar için çap aralığı: 64 mm
• Tip: 12 takım istasyonlu vdi taret
• Tip: programlanabilir hidrolik punta
• Robot / tahrikli aletler için hazırlıktalaş konveyörü ve takım ölçümü dahildirOPSİYONEL: Ek ücret karşılığında takım tutucular. Ekteki resimlere bakın
Küçük ilan
Sankt Leon-Rot
2.397 km
üniversal işleme merkezi
MandelliStorm 2500
Çağrı
Koşul: mükemmel (kullanılmış), Üretim yılı: 2008, çalışma saatleri: 29.000 h, Fonksiyonellik: tamamen fonksiyonel, MANDELLI Storm 2500 Horizontal Machining Center / Flexible Manufacturing Cell
Manufacturer: Mandelli Sistemi S.p.A.
Model: Storm 2500
Type: U 42 / 8000
Factory No.: XXXX
Year of manufacture: 2008
Origin: Italy
CNC Control: Siemens Sinumerik 840D
System Control: CswWin / Beckhoff Industrial PC
Condition/Maintenance: Very Good / Single-shift machine / Very low operating hours
Technical Data:
X-axis travel: 2,600 mm
Y-axis travel: 1,500 mm
Z-axis travel: 1,800 mm
B-axis: 360,000 positions / continuous
APC / Pallet axis: 360,000 positions
Rapid traverse (linear axes): 35 m/min
B-axis speed: 8 rpm
Accuracy according to VDI 3441:
Positioning accuracy P: 10 µm
Repeatability Ps: 5 µm
Spindle / Head:
U-head horizontal / vertical
Spindle taper: ISO SK 50
Speed range: 37 – 6,000 rpm
Spindle power: 44 kW
Max. torque: 706 Nm
Tool Magazine:
208 tool stations
Rack magazine with automatic tool handling
Max. tool length: 600 mm
Max. tool diameter: 450 mm
Max. tool weight: 35 kg
Pallet System:
Front transpallet / automatic pallet changer
6 pallets, each 1,000 x 1,250 mm
4 fixed stations
Rotary unit for loading and unloading workpieces
Cjdpfsy H D R Tox Alcerb
Electrical Data per nameplate:
System: S2500 / 840D
Rated voltage: AC 400 V, 3 Ph / PE
Frequency: 50 Hz
Full load current: 178 A
AC auxiliary voltage: 230 V
DC auxiliary voltage: 24 V
Standard: IEC 60204-1 / EN 60204-1
Chip Conveyor:
Manufacturer: Meta
Year of manufacture: 2007
Weight: approx. 1,100 kg
Additionally, an auger conveyor is visible in the machine area.
Equipment / Peripheral Systems:
Filtration unit
Hydraulic power unit
Chip conveyor
Auger conveyor
COSEMA peripheral unit
Switch cabinet system
Coolant and lubricant peripherals
Separate system operation panel
Extensive pallet system
Clamping Devices / Fixtures:
Multiple heavy-duty angle plates, fixture plates, grid clamping plates, custom workholding devices and pallet superstructures are available.
Tools / Accessories:
Numerous SK50 tool holders, boring bars, boring tools, milling arbors, drill and reaming holders, extensions, adapters as well as other spare and standard tools visible. Several hundred tool holders can be purchased additionally upon request.
Optionally / Upon Request:
Apfel tool cabinets with comprehensive tool inventory
Additional clamping devices and fixtures
ELBO CONTROLLI tool presetting unit
Workbenches / tool storage / shelving systems by agreement
The machine is in good, production-ready condition. It is a heavy-duty horizontal machining cell for flexible complete machining of large and complex workpieces. The work area shows normal signs of use for a heavy-duty machine in productive operation.
The system must be removed from the plant by June 2026. Earlier availability possible by arrangement. Machine can be inspected under power by arrangement.
All information provided to the best of our knowledge. Subject to errors, prior sale, and technical modifications.
Daha fazla ikinci el makine keşfedin
Küçük ilan
Wöllstadt
2.427 km
Yastık Poşet Makinesi A
Impuls PackagingBeutelpacker Table Top A
Çağrı
Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, The tabletop pouch packing machine 'Table Top Print' enables efficient packaging and sealing of products in prefabricated bags and is suitable for various formats.
The machine is easy to operate and features a user-friendly display, allowing jobs to be set up, saved, and operating parameters to be controlled. For greater flexibility, it offers both automatic and manual operation modes with a safety sealing bar. Staff training for packaging operators takes less than five minutes.
With integrated thermal transfer printing technology, pouches can be printed directly with high-resolution graphics, text, and barcodes, eliminating the need for separate labeling.
Features:
- Multicolor screen for easy setup
- Number of products to be packed can be preset
- Integrated total product counter (including reset option)
- Roll change in under one minute
- Sealing activated by foot switch, automatically, or by manual pressure
- Feeders for automatic bag filling available upon request
Technical specifications:
1. Maximum bag length: 450mm
2. Maximum bag width: 250mm
3. Maximum bag thickness: 0.04–0.1mm per layer
4. Packing speed: up to 25 pieces/minute
5. Power supply: 1Ph. 220V 50Hz
6. Power consumption: approx. 1 kW
7. Machine weight: approx. 70 kg (including printer)
Crjdsxlzr Ajpfx Alceb
8. Machine dimensions: approx. 670x665x860 mm
9. Print area: 53x75mm
10. Bag type: wicketed bags on rolls
Base machine: €12,500
+ Thermal transfer printer: €5,500
+ Label dispenser: €2,900
+ SATO label printer including dispenser: €6,500–9,000
Küçük ilan
Almanya
2.357 km
2014 Komori LA 437 67 M
KomoriLA 437 67 M
Çağrı
Koşul: ikinci el, Üretim yılı: 2014, Installed in 2015
Approx. 97 million impressions
Format: 94 x 64 cm (37 x 25 inch)
Crsdpfx Aljxb U Aysceb
Technical specifications:
- PQC-S control console with touchscreen
- KOMORI KHS-AI system for make-ready optimization
- KOMORI Smart Feedback for density adjustment and waste reduction
- Automatic washing and ink presetting
- KOMORI PSP automatic format and substrate thickness adjustment
- AMR (Automatic Make Ready) for preset job changes
- Quick start function for production
- Remote control for register and transfer cylinder adjustment
- Automatic sheet size setting
- Pneumatic side lays
- Mechanical and ultrasonic double sheet detection at feeder
- S-APC: semi-automatic plate change (no plate bending required)
- KOMORI DSC high-performance sheet guiding with exclusively double-diameter impression and transfer cylinders
- KOMORImatic film damping system
- technotrans alpha.c dampening solution supply
- Antistatic blower at feeder head
- Side blowers (feeder)
- 2-zone suction belt feeder table
- Delivery with sheet jogger/straightener
- Sheet brake with infinitely adjustable speed
- Air bar above delivery pile
- Antistatic bar above delivery pile
- Adjustable fans for precise sheet travel and pile formation
- Weko AP160 powder sprayer
- KOMORI PDC LII, online density measurement
- KOMORI PCC CIP3/4 data conversion software
Max. sheet size: 640 × 940 mm
Min. sheet size: 297 × 420 mm
Max. printing area: 620 × 930 mm
Plate size: 700 × 945 mm (thickness: 0.30 mm)
Blanket size: 800 × 955 mm (with bars)
Substrate thickness: 0.04 – 0.6 mm
Gripper margin: 10 mm
Plate clamp margin: 45 mm
Max. printing speed: 13,000 sheets/hour
Pile height, feeder: 800 mm
Pile height, delivery: 900 mm (*depending on paper, ink, and operating conditions)
Length: approx. 8,169 mm
Width: approx. 3,320 mm (without peripheral equipment)
Power consumption: approx. 53 kW / 50 Hz (without peripheral equipment)
Küçük ilan
Petrovče
1.826 km
Alın kaynak için pnömatik cihaz
EVVSV-63P
Çağrı
Üretim yılı: 2015, Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, The Sv‑63P pneumatic butt welding machine features a robust vertical construction comprising vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the main frame, which also carries the moving carriages connected to a horizontal cylinder for compressing the workpiece. The movement of the carriages is limited in both directions—for compression and opening—and the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping at the preset jaw spacing is controlled by foot pedals. An additional control cabinet with switches and buttons enables single or simultaneous clamping and supports both manual and automatic welding modes. After welding, the clamping jaws lift, and the carriages return to their starting position. Welding parameters are set using a controller mounted on the side of the machine. Welding voltage regulation is managed via thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Internally, a power board with a thyristor and a main control board ensure smooth operation. A compressed air conditioning unit with a pressure regulator for adjusting the clamping force is located on the machine cover. The main switch to activate the machine is positioned at the welding parameter setting controller.
Cedpfxjyqr Sxe Alcorb
Küçük ilan
San Pietro in Gu' (PD)
2.067 km
Kanca kasalı yük kamyonu (roll-off)
MERCEDES-BENZMERCEDES AXOR 2533 SCARRABILE CON GRU E POLIPO
Çağrı
Koşul: ikinci el, kilometre: 400.000 km, güç: 243 kW (330,39 bg), ilk tescil: 01/2009, yakıt türü: dizel, dingil konfigürasyonu: 3 dingil, renk: beyaz, vites türü: mekanik, emisyon sınıfı: Euro 5, Üretim yılı: 2009, LICENSE PLATE: FX778XG
TITLE: MERCEDES AXOR 2533 HOOKLIFT SPRING FRONT/REAR AIR SUSPENSION 6X2 WITH MARCHESI CRANE BEHIND CABIN PLUS GRAPPLE WITH MECHANICAL ROTATOR
REF: 22C33
YEAR: 2009
HORSEPOWER: 330
ENGINE DISPLACEMENT: 7201
EMISSION CLASS: Euro 5
KILOMETRES: 400,000
TRANSMISSION: Manual with crawler gears
DIFFERENTIAL LOCK: Yes
RETARDER/INTARDER: No
AXLES: 3 (6x2)
Credsv H Haxopfx Alceb
WHEELBASE: 4,200 mm
TOWING: No
ORIGIN: Italy
CAB: Short and low
SEATS: 2
PAYLOAD: 12,200 kg
- GVW: 26,000 kg fully loaded
- GVW with trailer:
BODY TYPE: Hooklift
HOOKLIFT MODEL: GUIMATRAG T26/6
EXTENDABLE: Yes
SWING ARM: No
ROLLER: Vertical
ADR: No
BODY ACCOMMODATION
FROM: 4.50 m + 0.20 m
TO: 6.20 m + 0.20 m
TOTAL LENGTH: 9.01 m
TOTAL LENGTH WITH CONTAINER: 9.30 m
FEATURES:
- 3rd steered liftable axle with intelligent control
- Rear piping for hydraulic doors or hydraulic accessories
- Hydraulic lines preset for grapple with hydraulic rotator
- MARCHESI M8500L 1.72 crane (1 extension, 7.20 m reach)
- Grapple with mechanical rotator
REFURBISHED: Yes
LAST INSPECTION: 10/01/2024
TYRE CONDITION: 50%
PRICE: €48,500 + VATH
The listed prices do not include VAT. Please contact sales for up-to-date offers and conditions.
For further information:
Loris: 3484773001
URL:
#thespecialistsinhooklifts
AURORA HOOKLIFTS
Specialised in sale and purchase of industrial and commercial vehicles, mainly serving the waste management sector.
Specialised in trucks, trailers, and hooklift equipment.
With a fleet of over 50 trucks and over 150 bins and containers, with and without hooklift cranes, ready for immediate delivery.
E.&O.E.
Due to the volume of listings and details included, Aurora invites customers to verify the accuracy of data with our sales staff.
Küçük ilan
Nattheim
2.267 km
Dübel deliği delme makinesi
GannerDB 21
Çağrı
Koşul: ikinci el, Üretim yılı: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW Complete in standard configuration with: - Fully automatic electronic control with impulse operation via foot pedal for clamping-drilling-unclamping, with electrical skip drilling functionality. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic extension of drilling depth for end-grain drilling, eliminating the need to reset drilling depth when switching from flat face to end grain (e.g., +10 mm for dowel length 35 mm, flat face drilling depth 14 mm, end grain drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm spindle pitch, 1.5 kW motor (drill feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit replacement. - Easy pivoting of the drill unit from 0° to 90°, assisted by gas cylinder. - 1 clamp carrier, movable along the Y-axis with 3 pneumatic clamping cylinders, suitable for workpiece heights up to max. 80 mm.
Ideal stop system, consisting of: - 1 stop rail, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 locating stops, with quick-change system, easily switchable from right to left stop side for mirrored shelf drilling in cabinet construction, also usable for line boring in System 32. - Side stops and position adjustments including the setting of drilling height via mechanical digital counters on the support table. - Side stops can be easily swung away for shortest possible changeover from cabinet drilling to frame and line drilling operations. - Clamping arms for the clamp carrier designed for row positions up to max. 300 mm. - Optimal three-stage tool system.
1 set of dowel drill bits: - 5 carbide-tipped dowel bits, Ø 8x77 mm, right-cutting - 4 carbide-tipped dowel bits, Ø 8x77 mm, left-cutting
Base machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW Complete in standard configuration with: - Fully automatic electronic control with impulse operation via foot pedal for clamping-drilling-unclamping, with electrical skip drilling functionality. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic extension of drilling depth for end-grain drilling, eliminating the need to reset drilling depth when switching from flat face to end grain (e.g., +10 mm for dowel length 35 mm, flat face drilling depth 14 mm, end grain drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm spindle pitch, 1.5 kW motor (drill feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit replacement. - Easy pivoting of the drill unit from 0° to 90°, assisted by gas cylinder. - 1 clamp carrier, movable along the Y-axis with 3 pneumatic clamping cylinders, suitable for workpiece heights up to max. 80 mm.
Ideal stop system, consisting of: - 1 stop rail, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 locating stops, with quick-change system, easily switchable from right to left stop side for mirrored shelf drilling in cabinet construction, and also applicable for line boring using System 32. - Side stops and position adjustments including adjustment of the drilling height via the support table using mechanical digital counters. - Side stops can be easily swung away for shortest possible conversion between cabinet, frame, and line boring operations. - Clamping arms for the clamp carrier designed for row positions up to max. 300 mm. - Ideal three-stage tool system.
Extraction funnel, dust tes
Credpoxnlfljfx Alcob
Küçük ilan
Bischofszell
2.299 km
OTOMATİK KESİM SİSTEMİ
UCHIDAAEROCUT ONE
Çağrı
Üretim yılı: 2007, Koşul: mükemmel (kullanılmış), makine/araç numarası: 20051619, Temel işlevler: yarık, çapraz kesim, katlama Kağıt besleme boyutu: 210 (G) x 210 (U) - 370 (G) x 520 (U) mm Minimum bitmiş boyut: 55 (G) x 45 (U) mm Kağıt ağırlığı: 120 - 400 g/m² * Kağıt kalitesine bağlı olarak Çalışma: 4" dokunmatik ekran İş belleği: 263 ön ayarlı iş & 150 kullanıcı tanımlı iş hafızası. (100 MANU SET + 50 FLEX MODU) Besleme mekanizması Üst bant üç emişli emiş besleme ( patentli) Yan fan Eğim ayarı Yan hizalayıcı Çift besleme algılama Kesik işareti kaydı Giriş tepsisinin istifleme kapasitesi: 100 mm Hız 8,8 yaprak/dk.: SRA3 21up kartvizit 11 yaprak/dk.: SRA3 8up kartpostal 12,2 yaprak/dk. : SRA3 4up tebrik kartı 15,4 yaprak / dak.: A4 2 kesim ve 1 katlama
Csdpfjhii Swjx Alcerb
Küçük ilan
Topkapı
586 km
OFSET LEVHA BASKI MAKİNASI
MAN RolandR 704 3B LV Direct Drive
Çağrı
Koşul: iyi (kullanılmış), Üretim yılı: 2014, Direct Drive
Without sheet reversal
APL (Automatic Plate Loader): Fully automatic plate changing system with motorized clamping and tensioning of printing plates
InlineColorPilot IPC (Graphometronic): In-line color measurement and control system
PressPilot control center
IntegrationPilot plus
Non-stop
Antistatic system at feeder (Eltex)
Antistatic system at delivery (Eltex)
Inking unit temperature control by Technotrans (water-cooled)
Automatic blanket washing device with cloth (Elettra)
Automatic ink roller washing device
Crodpfxsxiw Tqo Alcob
Impression cylinder washing device (cloth washing system)
Airglide delivery
ROLAND SelectDryer IR/TL: Infrared/Thermo Air end dryer – High Performance
Performance package IPA reduced
Chambered doctor blade coating system with chambered doctor blade and anilox roller
Powder Max smart: Powder spraying system
QuickChange Air: Job-specific and reproducible air settings for all relevant air consumers via the control center.
QuickChange Clamp: Multifunctional clamping bar for the coating forme cylinder
QuickChange Color Plus: Self-learning algorithm for various ink and paper types for optimal presetting
QuickChange Transferter: Substrate thickness adjustment
Quickstart: Software for machine control optimization after stops
Premium speed: 18,000 iph max.
LCS: Low Coverage Stabilisation software for inking unit setting with very low ink coverage
Air supply: SelectAirStation
Küçük ilan
San Giovanni In Marignano
1.952 km
CNC torna tezgahı
DOOSANPuma 2600SY II
Çağrı
Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2018, Fonksiyonellik: tamamen fonksiyonel, arabada tur dönme çapı: 630 mm, torna boyu: 760 mm, torna çapı: 376 mm, iş mili deliği: 92 mm, maksimum mil hızı: 4.000 dev/dak, mil hızı (dk.): 20 dev/dak, X ekseni hareket mesafesi: 260 mm, Y ekseni hareket mesafesi: 105 mm, Z ekseni hareket mesafesi: 830 mm, mil motoru gücü: 15 W, hızlı travers X ekseni: 30 m/dak, hızlı tablası Y ekseni: 10 m/dak, hızlı ilerleme Z ekseni: 30 m/dak, toplam yükseklik: 2.163 mm, toplam uzunluk: 3.560 mm, toplam genişlik: 1.945 mm, kaydırmaz yatak üzerindeki torna çapı: 780 mm, toplam ağırlık: 6.550 kg, çubuk geçişi: 81 mm, Donanım: dokümantasyon / kılavuz, I am offering a Doosan Puma 2600 SY II CNC lathe, a high-productivity machine equipped with Y-axis, main spindle, and sub-spindle, ideal for completing complex workpieces in a single setup.
Crjdpfxoymdt Tj Alcjb
The machine is equipped with a bar feeder and numerous accessories. It is in perfect working condition and can be viewed under power by appointment.
The lathe is in excellent operational condition, has received regular maintenance, and is available for inspection during dry runs by appointment.
Included accessories:
- Top Automazioni bar feeder, model X-Files S380SX
- Chip conveyor
- Tool presetting system
- Bellegrandi collet chucks on main and sub-spindle
- Parts catcher with conveyor belt
- Static and driven tool holders
Küçük ilan
Schwäbisch Gmünd
2.303 km
Makara
Haspel
Çağrı
Koşul: ikinci el, Üretim yılı: 2015, The decoiler, including the coil turner, is available for sale and can be inspected at short notice.
HS Automation
Strip processing line with 4-ton decoiler including coil turner
Type: MS41OL, Year of manufacture: 2015
Technical Data – Decoiler:
- Max. coil weight: 4,000 kg
- Standard strip width: 500 mm
- Expansion range: 450 – 550 mm
- Max. outer coil diameter: 1,900 mm
- Expansion process (decoiler drive): hydraulic, three-phase motor 400V 50 Hz
- Decoiling speed: 30 m/min
- Strip loop control: pay-off via preset pressure or loop control
- Coil support arms: 6 units with quick-release system
- Safety device: protection against uncoiling strip recoil
Crsdpfx Aow D Sn Uelcjb
Decoiler Design and Function:
The decoiler is constructed from a robust assembly of electrically welded and precision-machined components. The expanding mandrel allows uncoiling to the left or right. Expansion is hydraulically controlled via the control console. The decoiler is equipped with a three-phase motor which enables manual winding and unwinding of the decoiler head during setup mode. In automatic mode, material can be discharged either using the preset pressure setting or continuously via loop control.
Control Description:
The decoiler is powered by a frequency-controlled three-phase motor. Loop control between the decoiler and downstream machine is performed contactlessly by an ultrasonic sensor. The analog regulation ensures smooth, continuous operation of the decoiler. All system functions can be operated in both setup and automatic modes.
Küçük ilan
Gemmingen
2.371 km
Tekerlekli yükleyici
LIEBHERRL 538 kein 524 526 542 546 nur 2720 Std. TOP
Çağrı
Koşul: ikinci el, Üretim yılı: 2020, çalışma saatleri: 2.720 h, Donanım: her tahrikli, Top machine – like a demonstration unit! Only 2,720 operating hours!
Liebherr L 538 Z 2plus1 Z-lift frame
Serviced by Liebherr, delivered to customer 13.10.2023 at 150 hours
Last service on 24.11.2025 at 2,303 hours
Original paint
Chassis no.: VATZ1754EZB 061150
Year of manufacture: 2020
Operating hours approx.: 2,720
Z-kinematics lift frame – earthmoving
4-cylinder inline engine 120 kW / 163 HP, water-cooled, turbocharged, emissions stage 4
Machine width: 2,500 mm
Hydrostatic drive with 3-speed transmission – 40 (36 km/h)
Special equipment:
* Ride control BSS – boom suspension
* Central lubrication system, Liebherr factory-installed
* Automatic climate control (maintains preset temperature)
* Access aid in front of windscreen for easier cleaning
* Premium display with touchscreen
* Driver's seat “Comfort” with pneumatic suspension and seat heating
* Adjustable steering column
* Sliding window, right
* Rear sunblind
* Front sunblind
* Comfort radio with hands-free system
* Safety door, opens 180 degrees (rests against the cab wall when open)
* Automatic and programmable bucket return
* Boom lowering system with automatic bucket return when fully dumped
* 3rd hydraulic control circuit for attachments like high-tip bucket, sweeper, grab bucket, etc.
* 2 LED work lights at cab roof rear
* 2 LED work lights at cab roof front
* Automatic engine shut-off after 5 minutes at idle
* Rear mudguard extensions, rubber
* Comfort radio with hands-free system
* Rotating/foldable LED beacon
* Stainless steel exhaust tailpipe
Tyres 20.5 x 25 L3 front axle 2 x 50 %
Tyres 20.5 x 25 L3 rear axle 2 x 50 %
Credoy Eaxqepfx Alceb
Automatic self-locking differentials, 45% locking effect on both axles
Net price with fixed 2.5 m³ bucket: €98,900 net + VAT.
* Additional equipment available for extra charge:
– Quick coupler incl. hydraulic preparation: €3,550
– High-tip bucket 3–4 m³
– 4-in-1 bucket (grab/leveling) 2 m³: €3,950
– High-volume bucket 5 m³: €3,990
– Pallet forks 5 t from €2,190 (8 t optional)
Available with integrated scale for extra charge:
* Pfreundt WK 60: €5,900
All prices net export – with valid number and papers. Sale only to businesses or for export.
Sold as-described/as-inspected, with no guarantee or warranty. The stated mileage or operating hours are based on the odometer/hour meter reading; we do not guarantee their accuracy! Prior sale reserved.
Vehicle description does not constitute a binding offer; specifications are not guaranteed characteristics. Description and data serve only for general vehicle identification and do not represent a legal guarantee. Completeness of the information is not guaranteed. All descriptions/images are non-binding and do not constitute guaranteed features. Only agreements in the order confirmation and invoice apply. Seller assumes no liability or warranty.
Küçük ilan
Mahlstetten
2.345 km
Plazma kesme makinesi
MicrostepMastercut Eco Plus 3001.15
Çağrı
Koşul: ikinci el, Üretim yılı: 2017, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 2202, X ekseni hareket mesafesi: 3.000 mm, Y ekseni hareket mesafesi: 1.500 mm, giriş akımı türü: trifaze, giriş voltajı: 400 V, giriş akımı: 50 A, Microstep Mastercut Eco Plus 3001.15,
Year of manufacture: 2017,
Control: IMSNC,
Oxyfuel cutting table: 3000 x 1500 mm,
Extraction channel left / right,
Plasma source: Kjellberg HiFocus 161i,
Adjustable 10 - 160 A,
Power Source HiFocus 161i PLUS
• Flexible adjustment of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control
• Optimal process control with ultra-fast cutting current regulation
• Monitoring of process through torch cooling, ignition time, pilot arc time, short-circuit time for torch ignition and power source
• Indication of operating states and error messages via LED and display
• Analog and serial interface for connection to CNC controllers
• Infinitely variable cutting current adjustment from 10 - 160 A and for marking from 5 - 25 A
• Optimum piercing with stepless delay time for the main arc and adjustable current ramp-up
• Adjustable current reduction for cornering, start, and end signals of the guiding system
• Automatic display of preset cutting current
• Serial data transfer for PC diagnostics
Plasma Cutting Technology: Contour Cut
• Further development of HiFocus technology for mild steel
• Optimized for cutting fine internal and external contours
• High cut quality and contour accuracy
• Holes with angular deviation according to DIN EN ISO 9013 in range 2-4
• Low angle deviations and smooth cut surfaces
• Excellent repeatability and dimensional accuracy
• No time-consuming rework – high productivity and low costs
• No additional equipment, software, or new consumables required
• Standard equipment as default
Plasma Torch PerCut 200/210
• PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting
• Quick-change torch PerCut 210 with threaded lock for fast and convenient setup
• Special torches available for special applications
• Higher cutting speeds reduce cost per meter
• Long lifetime of consumables saves resources
• Narrower kerf results in less emissions and waste
• Significantly lower gas consumption than competitors thanks to effective liquid cooling up to the nozzle tip
• Reduced gas consumption also means lower noise levels
Csdpfey Nd Hyex Alcsrb
• Bevel cutting up to 50 degrees with standard consumables
• Cutting and marking with the same consumables
Power Source HiFocus 161i
Power supply: 400 V; 3 phase; 50 Hz
Max. connected load: 28 kVA (100% duty cycle)
Main fuse (slow): 50 A
Protection class: IP 22
Open-circuit voltage: 330 V
Cutting current: 10 – 160 A (100% duty cycle)
Marking current: 5 – 25 A (100% duty cycle)
Cutting range:
Max. 50 mm
typically 0.5 – 38 mm recommended
Max. piercing thickness: 30 mm
Weight: 206 kg
PerCut 200 plasma machine torch
PerCut 210 quick-change torch
Clamping diameter: 50.8 mm
Plasma gases: O2, N2, Ar/H2
Marking gases: Ar
Swirl gases: O2, N2, air, N2/H2 (F5)
Küçük ilan
Komenda
1.872 km
Yer yıkama ve kurutma makinesi
REM PowerSMB 7000/1200T
Çağrı
Koşul: yeni gibi (kullanılmış), Üretim yılı: 2022, çalışma saatleri: 5 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: E6-0000252, çalışma genişliği: 860 mm, alan performansı: 6.830 m²/saat, toplam ağırlık: 287 kg, garanti süresi: 12 aylar, depo kapasitesi: 150 l, su tankı kapasitesi: 160 l, batarya voltajı: 36 V, tırmanma kabiliyeti: 18 yüzde, gürültü seviyesi: 73 dB, pil kapasitesi: 150 Ah, fırçalama ünitesi çapı: 430 mm, boş ağırlık: 287 kg, Donanım: CE işareti, Tip plakası mevcut, For sale is a professional REM Power SMB 7000/1200, a powerful floor scrubber designed for cleaning large indoor areas such as salesrooms, warehouses, and production halls. This model achieves a cleaning capacity of 6,830 m²/h, features a cleaning width of 860 mm, suction width of 1,200 mm, a 150-liter clean water tank, and a 170-liter dirty water tank. Machine dimensions are 158 × 86 × 126 cm, with a weight of 287 kg.
The SMB 7000/1200 is a dual-brush professional ride-on scrubber with battery-powered drive wheels, water filtration, a high-quality vacuum motor, heavy-duty oil-bath gear reducer, preset cleaning settings, automatic lifting and lowering of the squeegee and brushes, and a comfortable seat with a safety switch. Brush and squeegee replacement is quick and tool-free. Model order number: 400700012003.
This is a demo unit with only 5 operating hours. Price includes batteries, charger, 2 brushes, and a complete squeegee assembly with rubbers. 12-month warranty included.
Key technical data:
Crodpfey Drlmjx Alcsb
6,830 m²/h | 860 mm cleaning width | 1,200 mm suction width | 150 l clean water | 170 l dirty water | 287 kg | demo machine | 5 operating hours.
Küçük ilan
İtalya
2.465 km
Mazak Variaxis 630-5X
MazakVariaxis 630-5X
Çağrı
Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2003, X ekseni hareket mesafesi: 630 mm, Y ekseni hareket mesafesi: 765 mm, Z ekseni hareket mesafesi: 510 mm, kontrolör üreticisi: MAZATROL, kontrolör modeli: 640M, maksimum mil hızı: 12.000 dev/dak, mil motoru gücü: 26.000 W, takım magazinindeki yuva sayısı: 120, eksen sayısı: 5, Bu 5 eksenli Mazak Variaxis 630-5X 2003 yılında üretilmiştir. Maksimum 630 mm X ekseni hareketine, 765 mm Y ekseni hareketine ve 510 mm Z ekseni hareketine sahiptir. Makine 120 pozisyonlu bir takım magazini ve 12.000 rpm iş mili hızı ile donatılmıştır. Yüksek kaliteli işleme yetenekleri elde etmek istiyorsanız, satılık Mazak Variaxis 630-5X dik işleme merkezini göz önünde bulundurun. Daha fazla bilgi için bizimle iletişime geçin.
Codpsy Ey N Njfx Alcorb
• Masa boyutu: 500 × 500 mm
• Takım magazini kapasitesi: 120 pozisyonDurum
• Makine çalışır durumda
• Eksiksiz ve tamamen çalışır durumda
• Üretim varlıklarının yeniden tahsisi nedeniyle satışKullanılabilirlik / Satış koşulları
• EXW satış
• Teknik dokümantasyon talep üzerine temin edilebilir
• Ticari değerleme için kullanılabilir
• Olası teknik inceleme / saha ziyareti
• Doğrudan satın alma görüşmeleri mümkün
Ek ekipman
• Palet sistemi: Palletech - 12 istasyon + 2 yükleme/boşaltma istasyonu
• Renishaw iş parçası probu
• Lazer takım ön ayarı
• Yüksek basınçlı soğutma sıvısı sistemi: 18 bar
• Bant tipi talaş konveyörü
Küçük ilan
Cascina Faustina
2.272 km
5 eksenli üniversal işleme merkezi
SpinnerU5-1520
Çağrı
Koşul: ikinci el, Üretim yılı: 2018, Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 1.520 mm, Y ekseni hareket mesafesi: 520 mm, Z ekseni hareket mesafesi: 460 mm, hızlı travers X ekseni: 32 m/dak, hızlı tablası Y ekseni: 32 m/dak, hızlı ilerleme Z ekseni: 32 m/dak, kontrolör üreticisi: SIEMENS, kontrolör modeli: 840D, dönüş hızı (maks.): 12.000 dev/dak, toplam ağırlık: 10.000 kg, maksimum mil hızı: 12.000 dev/dak, mili burnu: ISO 40, takım magazinindeki yuva sayısı: 32, Donanım: devir hızı sonsuz değişken, dokümantasyon / kılavuz, talaş konveyörü, Yıl: 2018, CE normlarına uygun
CNC: SIEMENS 840D, SHOP MILL, 4+1 eksenli
SADECE 18.300 açılış saati
Çalışma masası boyutları: 2 parçalı masa - sabit 920x540 mm / döner-eğilebilir 650x500 mm (genişletme halkası ile)
Crsdpfx Asy Azclelceb
X ekseni boylamasına hareket: 1520 mm
Y ekseni enine hareket: 520 mm
Z ekseni dikey hareket: 420 mm
Mil konik tipi: ISO 40
Mil dönüş hızı: 12.000 dev/dk
Otomatik takım değiştirici adedi: 32
Mil motor gücü: 15 kW
Yaklaşık net ağırlık: 10.000 kg
Aksesuarlar:
Dahili soğutma
Talaş konveyörü
Tam kapalı üst koruma
Pnömatik kapı açma
BLUM iş parçası problu ve presetleme imkanı
Küçük ilan
Eilenburg
2.237 km
Kasa kamyoneti
CITROENJumper 35 L3 Heavy Koffer LBW Kamera
Çağrı
Koşul: ikinci el, kilometre: 140.278 km, güç: 96 kW (130,52 bg), ilk tescil: 05/2019, yakıt türü: dizel, toplam ağırlık: 3.500 kg, renk: beyaz, vites türü: mekanik, emisyon sınıfı: Euro 6, koltuk sayısı: 3, toplam uzunluk: 7.030 mm, toplam genişlik: 2.115 mm, toplam yükseklik: 3.065 mm, yükleme alanı uzunluğu: 4.377 mm, yükleme alanı genişliği: 2.044 mm, yükleme alanı yüksekliği: 2.146 mm, Donanım: ABS, elektronik denge programı (ESP), hidrolik arka platform, is filtrasyon filtresi, klima, merkezi kilitleme, Errors and prior sale excepted!
Internal number: 1082. 2K50928
----EQUIPMENT
* SCHUTZ bodywork with box body
* SÖRENSEN tail lift
* Parking aid camera
* Seat belts: Height-adjustable 3-point seat belts with pyrotechnic belt tensioners
* ABS
* Storage compartments: - Storage compartment under driver's seat (not with seat base cladding) - Storage compartments in front doors - Storage tray above glove compartment - Storage compartments above ventilation nozzles in center of dashboard - Removable container under passenger seat - Lockable glove compartment on the right (5.3 dm3) - Lockable center storage (11.38 dm3)
* Driver's side airbag
* Interface box for bodybuilders
* Exterior mirrors, incl. side indicators with wide-angle insert
* Mechanical brake assist
* Rev counter
* Electronic Stability Program (ESP) incl. ASR with display - Hydraulic brake assist - Hill Holder (automatic hill start assist) - Load Adaptive Control (adapts ABS, ASR, and ESP functions to vehicle load)
* Electric front windows with comfort operation on driver's side
* Transmission: 6-speed manual gearbox
* Headrests (3)
* Paintwork: solid color
* Steering wheel with reach adjustment
* Manual headlight beam adjustment
* Multifunction display showing time, warning for lights left on and exceeding selected speed, as well as onboard computer
* Particle filter: Diesel particulate filter
* Upholstery: fabric
* Radio preparation (cables and antenna)
* Black side protection moldings
* Power steering
* Seats: Dual passenger bench seat with folding table in center backrest
* Seats: Driver's seat with longitudinal, height, and backrest adjustment, armrest, and lumbar support
* 12V socket in center console
* Service interval indicator
* Immobilizer with transponder
* Central locking with high-frequency remote control ... and much more.
----The vehicle is in unprepared condition!
Nationwide delivery available at additional cost.
Cedpfxeyht H Es Alcjrb
Errors and prior sale excepted.
We are happy to accept your vehicle in part exchange.
Financing / leasing also possible without down payment!
Still have questions? We are happy to advise you!
Küçük ilan
Schijndel
2.696 km
Heidelberg XL75-8-P+LX - C (2015)
HeidelbergXL75-8-P+LX - C
Çağrı
Koşul: ikinci el, Üretim yılı: 2015, 8-color offset press with perfecting + coating unit
Heidelberg XL75-8-P+LX
Year of manufacture: 2015
Impressions (million): 199
Machine controls
- CP 2000
- Prinect Press Center
- Color Assistant Pro
- Inpress Control
- Press Center Instant Gate
- Wallscreen
Feeder
- PPF Preset Plus feeder
- Suction belt table
- Steel plate in feeder
Printing units
- Number of printing units: 8
- Press with perfecting: 8/0, 4/4
- AutoPlate XL
- Alcolor dampening system
- Automatic ink roller washing device
- Automatic blanket washing device
- Automatic impression cylinder washing device
- Dampening unit cooling and recirculation system: Technotrans beta.c
- AlcoSmart: AZR
Csdpfxjy Ipm Ae Alcerb
- Ink supply system: Technotrans c
- Ink unit temperature control: Heidelberg CombiStar
Coating
- Number of coating units: 1
- Tresu chamber doctor blade system
Drying
- DryStar Advanced
- DryStar Combination: IR-hot air
- IR + hot air dryer in delivery
Delivery
- PPD Preset Plus delivery
- Extended delivery
- Powder unit: PowderStar AP500
Accessories
- AirStar
- Water-cooled cabinets
- Air compressor, exclusive
- Heat exchanger for cabinets, exclusive
Güven mührü
Machineseeker tarafından sertifikalandırılmış bayiler

Küçük ilan
Ennepetal
2.561 km
Şerit Testere - Otomatik
KASTOtec AC5
Çağrı
Koşul: ikinci el, Üretim yılı: 2002, Cutting diameter / mm
Saw band length / mm
Csdpfx Aoxrg E Ijlcorb
Cutting width / mm
KASTO tec AC5 Automatic Bandsaw
Sawing power: 23 kW
Machine weight: 5,9 t
Year of manufacture: 2002
Cutting ranges in mm approx.:
Round: 530 mm
Square: 530 x 530 mm
Flat: 530 x 630 mm
Smallest material dimension to be cut: 10 x 10 mm
Minimum cutting length: 6 mm
Minimum end piece length (single cut): 10 mm
Minimum end piece length (automatic mode): 35 mm
Automatic material feed, single max. (standard): 600 mm
Automatic material feed, single max. (option): 1500 / 3000 mm
Material feed, multiple: 9999 mm
Machine roller conveyor length: 1568 mm
Max. workpiece weight: 2275 kg
Cutting speed: 12-120 m/min (infinitely variable)
Feed rate: infinitely adjustable
Material feed: with ball screw
Automatic feed: with horizontal clamping vise
Material clamping: hydraulic, infinitely adjustable
Clamping force
Machine vise: 200-1000 daN
Feed vise: 200-2000 daN
Saw band tension: hydraulic, preset at factory
Saw band cleaning: via easily replaceable double brush driven by hydromotor
Coolant tank volume: approx. 185 l
Pump performance: approx. 25 litres/min
On request, we can also offer you the 4 immediately available saw bands for an additional charge.
Küçük ilan
Ottersweier
2.416 km
Düz yatak LED UV yazıcı
MutohXpertJet 1462UF
Çağrı
Koşul: yenilenmiş (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, XpertJet 1462UF, Flatbed LED UV Printer, fully refurbished, including on-site installation
UV-LED flatbed printer featuring a moving gantry system and a table size of 1,420 mm x 700 mm. With two staggered print heads for independent CMYK and white/varnish printing, and two 4” wide UV curing lamps, flawless two-layer printing can be achieved without speed loss.
The XPJ-1462UF meets a broad range of requirements, including 2.5D direct printing, industrial printing, packaging, awards, as well as sign and display printing, including Braille. An attractive all-in-one solution for screen printers looking to expand their workflow with digital direct-to-object printing, and for industrial printers aiming to diversify their service offering with more versatility and color.
Advantages:
- 6 colors: C, M, Y, K, white, and varnish
- Four-zone magnetic vacuum bed capable of supporting up to 50 kg/m2
- Prints on objects up to 150 mm thick
- Automated media height and obstruction detection
- Two piezo drop-on-demand inkjet print heads, staggered configuration for fast multilayer printing
- Automated nozzle check unit minimizes printing errors and downtime
- Next-gen UV-LED ink – free from SVHC and CMR, stretchable, scratch-resistant, and compatible with a wide range of media
- Original VerteLith RIP software offering numerous features for UV printing: multi-page PDF support for variable data, fixture attachment, embossing presets, and a structure library with 100 different texture patterns
Print head technology: 2x Epson (staggered)
Two piezo drop-on-demand inkjet print heads, staggered arrangement for fast multilayer printing.
Print resolution: up to 1,440 dpi
Max. print area: 1,420 x 700 x 150 mm
Four-zone magnetic vacuum bed – supports up to 50 kg/m2
Height adjustment: automatic thickness setting
2 x 4” multi-segment UV-LED curing lamps
Next-generation Mutoh UV-LED ink US61/UH21 – free from SVHC and CMR, stretchable, scratch-resistant, and compatible with multiple substrates
Interface: GB-Ethernet (1000BASE-T)
Dimensions (L x W x H):
Printing system: 2,770 x 1,459 x 1,569 mm
Weight: approx. 500 kg
Crodsy I Ud Hopfx Alcsb
Scope of delivery:
XPJ-1462UF
User manual
RIP software VerteLith™
Start-up cleaning (8 cartridges, 220ml each)
Ink adapters (set of 6)
Tower light, foot pedal, cables
Küçük ilan
San Martino
2.025 km
Optimizer çapraz kesim testere bant besleme
CURSALTRV 1200 Ø500 - Customizable
Çağrı
Koşul: yeni, Üretim yılı: 2024, Uyarlanabilir testere: Küçük ve orta kesitler için ideal çözüm
Tek bir alette tam optimizasyon, yüksek hassasiyet ve maksimum hız
TRV 1200, ister ham ister boyalı olsun, tekli levhaların işlenmesindeki günlük zorlukların üstesinden gelmek için mükemmel bir testeredir. Gelişmiş teknolojisiyle ultra hızlı ve verimli kesim sistemi, operatörler için stres yaratmadan her operasyonun optimize edilmesini sağlar. İster küçük ister orta kesitli olsun, TRV 1200 kusursuz performansı garanti eden sürekli bir çalışma döngüsüyle tüm ihtiyaçlarınızı karşılamak üzere tasarlanmıştır.
Akıllı çalışma ve tam otomasyon
Yenilikçi dokunmatik ekran, kesim listelerini doğrudan cihazınızdan veya uzaktan ofisinizden kolayca yüklemenizi sağlar. İstediğiniz optimizasyonu seçtiğinizde sistem aşağıdaki adımların hepsini otomatik olarak gerçekleştirecektir:
Cedpsv Ip Uzsfx Alcerb
malzeme tanıtımı (*bkz. Cursal aksesuarları)
Otomatik besleme ve konumlandırma
CNC'ye anında veri aktarımı ve optimizasyon
işlenmiş parçaların tahliyesi
Kalite, genişlik ve uzunluk seçimi (*Cursal aksesuarlarına bakın)
Ödün vermeden maksimum hız ve hassasiyet
TRV 1200'de hız olağanüstü: 195 m/dak, fırçasız servo motor tarafından kendi kendini sınırlıyor. Güçlü bir optimizatörün, yıkılmaz bir makine yapısının ve hassas masa kontrolünün sinerjisi mükemmel sonuçları garanti eder. CNC kontrollü motorlu bantlar ve pnömatik baskı tekerlekleri malzemenin kusursuz bir şekilde konumlandırılmasını sağlar.
Her türlü işleme için tam çok yönlülük
TRV 1200, geri kazanım çalışmalarından sorun gidermeye ve gelişmiş yazılım işlemleri gerektiren daha karmaşık görevlere kadar çeşitli uygulamalara mükemmel şekilde uyum sağlar. Sürecin her aşamasını optimize etmek ve minimum atıkla maksimum sonuç elde etmek için ideal bir ortaktır.
Gelişmiş ve kullanıcı dostu programlama yazılımı
100'den fazla önceden tanımlanmış kesim planı: Özelleştirilebilir genişlikler, kaliteler ve kesim özellikleri
Çeşitli optimizasyon seçenekleri: ticari değer için, atık için, miktar için, uzunluk için ve karma optimizasyon için
En iyi malzeme yönetimini sağlamak için optimizasyon simülasyonu
İşlenen miktarların sürekli izlenmesi
İşlemi basitleştirmek ve değerli alandan tasarruf etmek için makine gövdesinde dahili optimizasyon
Verimli yönetim için gelişmiş sayısal kontrol
TRV 1200'ün kalbi, kesintisiz üretimi garantileyen endüstriyel bir bilgisayar olan güçlü CNC'dir. HD dokunmatik ekran, USB aracılığıyla verileri kolayca içe aktarmanızı ve öğrenmesi hızlı, kullanımı kolay, basit ama güçlü bir yazılıma erişmenizi sağlar. Gerçek zamanlı sorunları çözmek için çevrimiçi uzaktan desteğe de erişebilirsiniz.
TRV 1200'ün üretiminizi nasıl dönüştürebileceğini keşfedin: tek bir düğmeye basarak hız, hassasiyet ve optimizasyon.
Küçük ilan
Avusturya
1.826 km
Eksantrik pres
HESSE by FRESANFP 130 P
Çağrı
Koşul: yeni, Condition: New
Delivery time: approx. 14–16 weeks from order
Country of origin: Turkey
Price: €83,200
Leasing rate: €1,572.48
Pressing force: 130 t
Nominal pressing force at 4.5 mm
Table length: 650 mm
Table width: 950 mm
Pass-through hole in table: 220 mm
Stroke: 1–132 mm
Strokes per minute: 50 1/min
Ram guides: 6
Ram adjustment: 95 mm
Taper hole in ram: 70 mm
Throat depth: 325 mm
Installation height: 500 mm
Motor: 11 kW
Length: 1,800 mm
Width: 1,725 mm
Height: 3,020 mm
Weight: 8,000 kg
Features:
— Welded steel frame construction
— 6-fold ram guide
— Pneumatic clutch-brake combination
— Safety enclosure with light barriers and side doors
— Mechanical overload protection
— Two-hand and foot pedal operation
— Manual stroke adjustment
— Motorized ram adjustment
— Variable stroke rate via frequency inverter
Operating modes:
* Setup mode
* Two-hand release
* Foot release
* 2-stroke operation via light barriers
* Continuous operation
Touchscreen for:
* Stroke counter with preset for continuous mode
* Stroke rate adjustment
* Lubrication intervals and duration
* Alarm messages
* Motor rotation direction
* I/O monitoring
2 free cams for peripheral connection
Credpfxjwiqn Rj Alcjb
Automatic central lubrication
Equipment in compliance with CE regulations
Symbolic images, pictures shown include optionally available clamping plate
OPTIONS:
– Vibration pads: €192.00
– Clamping plate: on request
– Hydraulic overload protection: on request
etc.
Sizin için aramayı kolaylaştırıyoruz: "preset"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.
Kullanılmış Preset (334)
Artık Machineseeker genelinde, 200.000’den fazla kullanılmış makineyle arama yapın.En popüler makine adlarını inceleyin:

Şimdi bilgi alın
+44 20 806 810 84
+44 20 806 810 84
Şimdi ilan ver
*ilan başına/ay













































































































































































































































































































