Alçak şasi römork

SCHWARZMÜLLER Tieflader mit gekröpftem Plateau

Durumu: yeni, azami yük ağırlığı: 23.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = Raised front platform including neck, corners chamfered * Approx. 5,350 mm = Low-bed platform – flat loading area * Approx. 850 mm = Rear ramp slope * Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) * Loaded loading height approx. 870 mm * When assembling a combination, please ensure compliance with the legally permissible total height and length! Chassis: * Steel welded construction with front neck and chamfered rear * Ramp slope with excavator bucket recess in center = rear depression between main beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing rails (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the low-bed, 1x in the ramp slope, 2x on the raised platform) * Standard ball-bearing slewing ring Chassis Attachments: * Pull-out extensions with softwood planks approx. 50 mm on both sides of the low-bed platform (track width of construction machines to be transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, allocation: 1 pair at front raised platform inside main beams; 1 pair at the very rear in the bucket recess left and right; 1 pair at front raised platform in front of the neck, inside main beams; 1 pair at the rear of low-bed in front of ramp slope, in the bucket recess left and right Towing Equipment: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked design, silent bushing bearing, drawbar hold spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support Equipment: * 2 pcs. automatic folding rear supports Axles: * SAF air-suspension low-loader axles with drum brakes, axle load 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 12 pcs. tires 235/75 R 17.5, 141J, manufacturer according to factory selection Brake System/Suspension: * Brake system in accordance with ECE directive R13 Ledpfey Aug Rjx Ak Seaa * Two-line compressed air brake system * Manufacturer Wabco, EBS system 4S3M, 1st and 2nd axle monitored * RSS/RSP stability program * Spring-actuated parking brake on 2nd and 3rd axle * Brake/air connection lines with 2 individual couplings yellow/red * EBS/ABS connection cable * Air suspension with lifting/lowering facility (only on rear axles), automatic ride height adjustment from 15 km/h (RTR), with axle stop on front axle Assistance/Safety Systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS CAN bus signal for display in truck cab (truck must be prepared accordingly, not a certified scale) * Tire pressure monitoring as per ECE directive 141, with pressure sensor in the wheels, for display in truck cab (display unit etc. must be available in the tractor unit) Floor: * Softwood floor approx. 50 mm, impregnated, projecting approx. 5–10 mm above frame upper edge * Steel checker plate covering above wheels Ramps: * 2 pcs. foldable single-piece lightweight steel loading ramps, length approx. 2,800 mm, width approx. 750 mm, with impregnated hardwood floor approx. 35 mm * Ramps adjustable in width from intermediate di