DC dişli motoru

SEW-EURODRIVE RF83/GSV132.2LL/V/B

Durumu: mükemmel (kullanılmış), Üretim yılı: 2020, 1. WEISHAUPT WM-G10/4-A (with gas train) - Output: 100–1100 kW - Version: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A (with gas train) - Output: 100–1000 kW - Version: ZM - Year of manufacture: 2015 (1 unit), 2013 (2 units available) Djdpfx Aowgyrtegmscd 3. WEISHAUPT WM-G10/3-A (with gas train) - Output: 125–900 kW - Version: ZM-LN - Year of manufacture: 2011 4. WEISHAUPT WM-G10/3-A (with gas train) - Output: 100–1000 kW - Version: ZM - Year of manufacture: 2011 5. WEISHAUPT WM-G10/3-A (with gas train) - Output: 100–1000 kW - Version: ZM - Year of manufacture: 2009

Durumu: mükemmel (kullanılmış), Üretim yılı: 2000, toplam ağırlık: 2.000 kg, toplam uzunluk: 3.000 mm, Köprülü Vinç ABUS - VS 2t x 3000 MACH-ID 9306 Dodpfx Ajx Dkxijgmscd Üretici: ABUS Tip: VS 2t x 3000 Lütfen dikkat: Bu sayfadaki bilgiler en iyi bilgimiz dâhilinde ve mümkün olduğunda üreticiden alınmıştır. Bilgiler iyi niyetle verilmiştir, ancak doğruluğu garanti edilemez. Bu nedenle bu bilgiler bir teklif veya sözleşme şartlarını teşkil etmez. Tüm önemli detayları kontrol etmenizi tavsiye ederiz.

Durumu: mükemmel (kullanılmış), Epson G10-854SR Robot Assembly Station Dispenser Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heat sink, SW = end wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) equipped with chassis and PCBs is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), lifted off the belt, and fixed in place. - The x-y-z handling system moves the dispenser head to the designated position and initiates the dispensing process. - Once dispensing is complete, the handling system moves to the rest position and the WT is placed back on the belt. - The WT continues to the KK+SW assembly area (provided there is no WT in the pickup position). St.3.2: Assembly Area KK+SW - The WT arriving from the dispensing area enters the KK+SW assembly area via the transfer belt. - The WT is stopped at the lift-positioning unit (HuPo), lifted and fixed in place; side walls of the partially assembled chassis are aligned in the process. - Simultaneously, KK-tray and SW-tray positioning takes place. - A stack of KK trays (12) and SW trays (12) are manually loaded onto the corresponding feeder belts outside the safety enclosure. - The two safety shutters open and the loaded tray stacks move into the gripping position of each stacker. - The safety shutters close again. - The respective grippers pick up the corresponding tray. - The z-axis performs tray singulation and transports the tray upwards (above the removal height). - For centering and stabilization, a centering support is positioned beneath the tray via x-handling. - Using the stacker's z-axis, the tray is placed on the centering support. - Trays are now ready for component extraction. - Using the multi-gripper on the SCARA robot, the KK is picked from the tray and placed into an intermediate position for alignment (to ensure a precise pick-up position for assembly). - The KK is scanned, gripped again, and if the scanner result is OK, it is assembled onto the WT. - NOK KKs are placed into a NOK bin. - The multi-gripper then picks up the SW from the tray and places it in the alignment position. - The SW is picked again and assembled onto the WT. - Then, proceed to the front assembly area. Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation range: J4: +/- 360 ° Dcsdpfeibx S Nsx Agmed Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005 ° Max. operating range: Axis 1: +/- 152 °, Axis 2: +/- 152.5 °, Axis 3: 420 mm, Axis 4: +/- 360 ° Max. operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400 °/s Permissible moment of inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User wiring (electrical): 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: ceiling IP protection class: IP20 Power and signal cable: 3m Financing through our bank is available as well. complete-concept.leasingo.de

Durumu: kullanılmış, Üretim yılı: 2018, makine/araç numarası: 70035883, Tahrik: Tekerlek Dcodpetr Hv Hsfx Agmod Boş ağırlık: 2.170 kg Kaldırma kapasitesi: 454 kg Çalışma yüksekliği: 1.000 cm Taşıma ölçüleri (U x G x Y): 2,31 x 1,17 x 2,15 m Daha fazla bilgi için PFEIFER GROUP ile iletişime geçin.