Mandrel boru bükme makinesi

Sommer Maschinenbau GmbH S60

Mandrel Bending Machine S6006
-----
For the production of precise tube geometries with bending radii up to 1.5xD
→ Maximum bending capacity for tube 60.3 x 4 mm (400 N/mm²)

→ Maximum bending capacity for tube 60.3 x 2.6 mm (stainless steel)
→ Total connected load 5 kW
→ Maximum tube loading length 6 meters

Robust and durable steel construction in a rigid, positively locked design – no torsion-prone design, e.g., due to a split construction between the bending head and mandrel support. Maintenance-free electromechanical drive for the bending axis. The control’s touch display allows for simple and intuitive programming and machine operation. After loading the tube, it is fixed in place by the chuck on the carriage. This ensures precise tube positioning and, therefore, the creation of dimensionally accurate geometries. Standard equipment also includes a tube geometry control prior to the bending process: if the bending process is started in an incorrect position, the machine does not give clearance to proceed. Operating errors are thus excluded. Optional additional features offer greater convenience and increase both output and thus the efficiency of the machine.

Data transfer from the optional TBS-3D tube calculation software (PC version) is done via USB stick or via FTP access from the computer to the machine controller. USB or LAN connector (RJ45) are included as standard. Existing tube geometries can be easily and quickly converted using, for example, the STEP format.

Standard Equipment:
Dkedew Sr Ucopfx Af Dsu
→ Electromechanical drive for the bending axis 2.2 kW
→ Rotational speed 2.9 rpm (=17°/sec)
→ Left-hand bending direction
→ Bending angle resolution 0.1°
→ Maximum bending radius 200 mm
→ Bending shaft diameter 50 mm
→ Electronic length measurement ±0.1 mm
→ Electronic rotation (twist) measurement ±0.1°
→ Manual stop system (overtravel stops in length)
→ Manual indexing system (15° increments for rotation)
→ Three-jaw chuck for securing the tube in the carriage
→ External control panel

PLC Control:
→ 10.1" touchscreen
→ ETH 10/100, X2X Link, USB
→ Foot switch operation
→ Data transfer via network (W)LAN or USB
→ Material database
Unique graphical programming: simple geometries can be calculated directly on the machine. After entering length and angle, the control automatically calculates the feed values and bending angles.

Hydraulics:
→ Hydraulic power 3 kW
→ Hydraulic tube clamping with adjustable clamping pressure
→ Programmable early mandrel retract

Options (available as additional equipment):
→ Variable bending speed via frequency converter or servo motors
→ Automatic tool retraction (manual or automatic)
→ Pneumatic chuck
→ Automatic mandrel lubrication
→ Pneumatic stop system (length + rotation)
→ Mobile design (on rollers)
→ Radius extension

Sample image shows a similar machine.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.