Hareketli kolonlu freze makinesi

TOS KUŘIM FREP-D 20X40A

GENERAL MACHINE SPECIFICATION

The main feature of the machine is a fixed gantry with a movable table. The gantry is equipped with a height-adjustable crossrail, which can be fitted with one or two vertical milling heads of the VFS 160 type. The gantry may also be equipped with one or two horizontal (side) milling heads VFS 160.

These spindle heads can be fitted with additional spindle attachments, with up to 4 available.

The clamping surface consists of two connected clamping tables, which can also be used independently after disconnection (only one table is operational at a time).

Clamping Table

Table dimensions (per table): 2,000 x 4,000 mm
Total length of combined tables: 9,000 mm
Clamping surface of combined tables: 8,500 mm
Clamping T-slots (width x pitch x number): 36 mm x 180 mm x 11 pcs
Table height from base: 1,000 mm
Load capacity per 1 m of table length: 5,000 kg
Travel of single table: 4,250 mm (combined tables: 9,000 mm)
Table feed rate: 15 – 3,000 mm/min
Rapid traverse: 9,000 mm/min

Gantry with Height-Adjustable Crossrail

Clear width between columns: 2,750 mm
Crossrail vertical adjustment: 2,295 mm
Crossrail feed rate: 750 mm/min

Vertical Milling Head VFS 160

Taper: ISO 60
Spindle power: 50 kW
Speed range: 15 – 710 rpm
Feed rate: 10 – 2,000 mm/min
Rapid traverse: 2,000 mm/min
Distance from spindle face to clamping table: 425 – 2,720 mm

Horizontal Milling Head VFS 160

Taper: ISO 60
Spindle power: 50 kW
Speed range: 15 – 710 rpm
Feed rate: 5 – 1,000 mm/min
Rapid traverse: 1,000 mm/min
Distance from spindle face to centering T-slot of the table: 377 – 1,177 mm

Overall machine dimensions (L x W x H):
20,720 mm x 8,500 mm x 7,150 mm

Additional Spindle Heads:

NVS Head (Extension Adapter)
Taper: ISO 60
Speed: 15 – 710 rpm
Maximum transmitted power from 60 rpm: 40 kW
Maximum torque: 6,500 Nm

HFUS Head (Universal Milling Head)
Taper: ISO 60
Speed: 15 – 710 rpm
Maximum transmitted power from 80 rpm: 22 kW
Maximum torque: 2,700 Nm
Swiveling in the vertical axis: 360°
Swiveling in the horizontal axis: 360°
Quill travel: 50 mm

HFOS Head (Double-Sided – Right Angle Milling Head)
Taper: ISO 60
Godpfoxpudtex Adlsub
Speed: 15 – 710 rpm
Maximum transmitted power from 60 rpm: 40 kW
Maximum torque: 6,500 Nm
Ability to swivel...

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.