Briketleme presiUMP Technika
BP 500 A
Makineye ait bilgiler
- Makine tanımı:
- Briketleme presi
- Makine üreticisi:
- UMP Technika
- Model:
- BP 500 A
- Seri numarası:
- BP 500 A
- Üretim yılı:
- 2019
- Durumu:
- kullanılmış
- Işlevsellik:
- tamamen fonksiyonel
- Çalışma saati:
- 4.000 h
Fiyat ve Konum
- Konum:
- Svajonės g. 38, Klaipėda, 94101 Klaipėdos m. sav., Литва
Teklif detayları
- Listeleme kimliği:
- A20251195
- Son güncelleme tarihi:
- 13.11.2025
Açıklama
BRIQUETTING PRESS
This press is designed for compressing secondary raw materials into briquettes (briquette shape: rectangular).
Technical specifications of the press:
Dimensions:
- Length: 1800 mm (2100 mm for transport)
- Width: 1800 mm (2000 mm for transport)
- Height: 1900 mm (2200 mm for transport)
- Net weight: 2945 kg
Power supply:
- 380 V, 50 Hz, 33 kW, 70-100 A
Output capacity:
- 450 kg/h (+/-50 kg depending on raw material type and particle size)
Noise level:
- A-weighted sound pressure level at the workplace: 77.8 dB +/- 5 dB
Compression pressure:
- Minimum: 1000 kg/cm²
- Maximum: 1700 kg/cm²
Pressure:
- Max. 300 bar
Raw material moisture content:
- Not exceeding 14%
Briquette dimensions:
- Width: 150 mm
- Thickness: 60 mm
- Length: 40-105 mm
Permissible ambient temperature for operation:
- -20°C to +35°C (up to +50°C with an additional cooling system)
Bledoxmav Nepfx Ah Ijr
The press consists of:
Electrical system – controls the hydraulic system of the press. There are four electric motors: the first (30 kW) is used for driving the main hydraulic pumps; the second (1.1 kW) for driving the cooling hydraulic pump; the third (0.55 kW) for operating the fan of the oil cooling system; the fourth (1.5 kW) for driving the sawdust feed screw. The operation of the motors and hydraulic valves is controlled via contactors and intermediate semiconductor relays by a microprocessor with expansion modules. A liquid crystal display with buttons is installed for visualization and parameter adjustment.
Hydraulic system – with the help of pumps, high- and low-pressure and solenoid hydraulic valves, and hoses, operates the hydraulic cylinders. There are three hydraulic cylinders: the first (main) for sawdust compaction; the second (vertical) for initial compaction of sawdust; the third (shaping) for transferring the briquette shape. The system also includes an oil cooling circuit with a pump and air cooler. Oil filtration is ensured by the main high-performance filter, a cooler system filter, and a fine filtration unit.
Raw material feed is provided by a built-in feed hopper. Material in the hopper is periodically mixed to prevent bridging. The mixer is driven by a chain from the screw's motor gearbox. The screw cyclically feeds the raw material into the vertical cylinder column shaft. The hopper is equipped with two material level sensors (upper and lower). If the hopper is enlarged, the sensors can be repositioned as required.
Control – there are two modes: manual and automatic. All control equipment is housed in an electrical cabinet. Automatic control is the standard operational mode, without operator intervention. Manual control is intended for press adjustment, fault detection, or returning cylinders to their initial positions in case of malfunction. Operation is facilitated by a display located on the electrical cabinet door, allowing viewing and adjustment of set parameters, as well as monitoring press status and errors.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
İlk kayıt tarihi: 2024
İstek gönder
Telefon & Faks
Ukmergė UMP TechnikaBP500A
Neckar-Odenwald-Kreis HEMPELFP
Berlin SAACKE
Nattheim WeinigUnicontrol 10
Porażyn 
Mitterndorf Atlas CopcoGA11VSD *FF
Schenkenzell HOWIAL + Cook Bolinder + Gannkomplette Anlage
Tauberbischofsheim WeinigUnicontrol 10
Geiselwind WeinigHydromat 22 B / 8 Wellen
Kežmarok WacoD170 / d50 / L200 + L150
Machineseeker-güven damgası
Güven damgası nedir?
Machineseeker, Machineseeker güven damgası ile seçili bayileri sertifikalandırmaktadır. Tahsis öncesinde deneyimli Machineseeker personeli tarafından standartlaştırılmış ve kapsamlı bir kontrol gerçekleştirilir.
Ne kontrol ediyoruz?
Ticaret izni veya ticaret sicil özeti kontrolü
Satıcının
posta adresinin kontrolü
Banka bağlantısı doğrulama
Ana numaranın
telefonla
erişilebilirliğinin doğrulanması
Ekonomik bilgi
olumsuz özellikler içermemelidir
Alıcı Şikayetleri
mührün geri çekilmesine yol açabilirBu, bir alıcı olarak sizin için ne anlama geliyor?
Machineseeker güven mührü sayesinde, alıcı olarak kendi kontrolünüz olmadan büyük olasılıkla dürüst ve güvenilir ticaret yapan güvenilir satıcıları tanıyabilirsiniz.
Elbette, satın alma sürecinde yine de anlaşmazlıklar ortaya çıkabilir. Machineseeker, Machineseeker platformunda aktif olan alıcıların veya satıcıların yasal ihlallerinden sorumlu değildir.