Çalışma platformlu yarı römork

FAYMONVILLE Telemax Sattelauflieger - hydr. gelenkt

You can find our full vehicle inventory with immediately and short-term available vehicles on our website.

Extract from the equipment. Full equipment details available upon request.

LOAD AREA:
* Gooseneck, length approx. 4,300 mm, with central beam
* Load platform with double telescopic extension, length approx. 9,300 mm
* A support table approx. 200 mm wide is permanently welded to the central beam
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected within the extendable beams and automatically adapt to the respective load area length (except for supply of the first locking point)
* Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4x2, 6x2, and 6x4
* TPMS tire pressure monitoring system according to ECE R 141
* BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables
* Technical axle load: 12,000 kg each
* Air suspension with raise and lower valve
* 275/70 R 22.5 3PMSF twin tires, brand of our choice
* ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power unit for hydraulic operations control. Without installation of supply connections on the tractor unit
* 4 pairs of recessed lashing rings on the gooseneck’s outer frame, foldable outward
* At the kingpin 1 pair of lashing rings (LC 10,000 daN), all other lashing rings (LC 5,000 daN)
* 4 pairs of stake pockets recessed in the gooseneck’s outer frame, for insertable stanchions approx. 100 x 50 mm
* 1 crosswise stake pocket rail in the gooseneck floor, for insertable stanchions approx. 100 x 50 mm. 1 additional at the rear of the gooseneck
* 2-inch king pin
* Mechanical landing legs with 2-speed gearbox and crank
* Approx. 32 mm wooden floor enclosed in ALU-omega profiles on the gooseneck and load platform
* 10 pairs of recessed lashing rings laid flat in the outer frame of the load platform, foldable outward: - In front of the last axle and on the rear cross member of the trailer, one pair of lashing rings each (LC 10,000 daN); all other lashing rings (LC 5,000 daN)
* 8 pairs of stake pockets recessed in the outer frame of the load area, for stanchions approx. 100 x 50 mm
Bedpsxc Axxsfx Ab Sjcw
* 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the left in direction of travel
* Remote steering from front and rear via cable remote control, with axle tracking control, without installation in the tractor unit
* Front wall made of steel, approx. 1,800 mm high, certified according to EN12642 : 2016 XL
* Round NATO socket on the front connection rail (Maeler & Kaege VG 96 917)
* 1 LED work light on the left and right at the landing legs, wired to the connector to the tractor unit
* 3 crosswise stake pocket rails mounted in the load floor for insertable stanchions approx. 100 x 50 mm
* 1 additional hook-in intermediate table, approx. 500 mm wide, for the telescopic tube with large cross section, with hardwood covering
* 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), under the load area on the right in direction of travel
* 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), under the load area on the left in direction of travel
* WADER container pockets in the loading platform for transporting: 1x 20' container in the load center, 2x 20' containers, 1x 40' container
* 1 LED work light each left and right in front of the axles

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.