Kullanılmış Faymonville Telemax Sattelauflieger - Hydr. Gelenkt satın al (4.399)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Uygunluk
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Makine üreticisi
- Üretici Z'den A'ya
- Makine üreticisi
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Uygunluk
- Uygunluk
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLETelemax Sattelauflieger - hydr. gelenkt
Ara
Durumu: yeni, azami yük ağırlığı: 42.900 kg, toplam ağırlık: 55.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 29.000 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website.
Excerpt from the specification. Full equipment details available upon request.
LOAD AREA:
* Gooseneck, length approx. 3,900 mm with central beam
* Load area with double telescopic extension, length approx. 9,300 mm
* A support table approx. 200 mm wide is permanently welded to the central beam
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the relevant load area length (except for the supply of the first and second locking points)
* Technical fifth wheel load: 25,000 kg for tractor units: 4 x 2, 6 x 2, and 6 x 4
* TPMS tire pressure monitoring system in compliance with ECE R 141
* BPW axles and suspension; all axles hydro-mechanically forced-steered, mounted on turntables
* Technical axle load per axle: 12,000 kg; air suspension with lift and lower valve
* 275/70 R 22.5 3PMSF twin tires. Manufacturer of our choice
* ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power unit for controlling hydraulic functions
* 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward
* 1 pair of lashing rings (LC 10,000 daN) at the king pin – all other lashing rings (LC 5,000 daN)
* 3 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm
* 1 crosswise stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm
Kdjdpfsyvnd Nox Alfok
* 1 at the rear of the gooseneck
* 2-inch king pin
* Mechanical landing legs with 2-speed gearbox and crank
* 8 pairs of stake pockets recessed in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm
* 10 pairs of recessed horizontal lashing rings in the outer frame of the load area, foldable outward
* Steering override from the front and rear via cable remote control, with single-track alignment of the axles, no installation in the tractor unit
* Last axle with air bellows venting activated by applying the parking brake
* Bulkhead made of steel, approx. 1,600 mm high, certified in accordance with EN12642:2016 XL
* Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917)
* 1 LED work light installed left and right at the landing legs with wiring to the tractor unit connection
* Approx. 32 mm wooden floor on the gooseneck and load area
* On the large cross-section telescopic tube, one locking position at approx. every 500 mm
* On the small cross-section telescopic tube, one locking position at approx. every 1,000 mm, resulting in a locking option every approx. 500 mm
* Cutouts in the outer frame of the load area for attaching lashing straps (LC 2,500 daN)
* 4 crosswise stake pocket rails mounted in the floor of the load area, for plug-in stakes approx. 100 x 50 mm
* 4 wheel chocks with holders under the load area
* 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the load area on the left in the direction of travel
* 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the right in the direction of travel
* 1 LED work light mounted left and right in front of the axles with wiring
* 2 axle load gauges mounted on the left side with axle load diagram included
* 1st axle with automatic lift axle function and start-up a...
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLETelemax Sattelauflieger - hydr. gelenkt
Ara
Durumu: yeni, toplam ağırlık: 55.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Üretim yılı: 2025, Donanım: ABS, You can find our full vehicle inventory with immediately and short-term available vehicles on our website.
Extract from the equipment. Full equipment details available upon request.
LOAD AREA:
* Gooseneck, length approx. 4,300 mm, with central beam
* Load platform with double telescopic extension, length approx. 9,300 mm
* A support table approx. 200 mm wide is permanently welded to the central beam
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected within the extendable beams and automatically adapt to the respective load area length (except for supply of the first locking point)
Kodpfx Ajxc Axxelfedk
* Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4x2, 6x2, and 6x4
* TPMS tire pressure monitoring system according to ECE R 141
* BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables
* Technical axle load: 12,000 kg each
* Air suspension with raise and lower valve
* 275/70 R 22.5 3PMSF twin tires, brand of our choice
* ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power unit for hydraulic operations control. Without installation of supply connections on the tractor unit
* 4 pairs of recessed lashing rings on the gooseneck’s outer frame, foldable outward
* At the kingpin 1 pair of lashing rings (LC 10,000 daN), all other lashing rings (LC 5,000 daN)
* 4 pairs of stake pockets recessed in the gooseneck’s outer frame, for insertable stanchions approx. 100 x 50 mm
* 1 crosswise stake pocket rail in the gooseneck floor, for insertable stanchions approx. 100 x 50 mm. 1 additional at the rear of the gooseneck
* 2-inch king pin
* Mechanical landing legs with 2-speed gearbox and crank
* Approx. 32 mm wooden floor enclosed in ALU-omega profiles on the gooseneck and load platform
* 10 pairs of recessed lashing rings laid flat in the outer frame of the load platform, foldable outward: - In front of the last axle and on the rear cross member of the trailer, one pair of lashing rings each (LC 10,000 daN); all other lashing rings (LC 5,000 daN)
* 8 pairs of stake pockets recessed in the outer frame of the load area, for stanchions approx. 100 x 50 mm
* 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the load area on the left in direction of travel
* Remote steering from front and rear via cable remote control, with axle tracking control, without installation in the tractor unit
* Front wall made of steel, approx. 1,800 mm high, certified according to EN12642 : 2016 XL
* Round NATO socket on the front connection rail (Maeler & Kaege VG 96 917)
* 1 LED work light on the left and right at the landing legs, wired to the connector to the tractor unit
* 3 crosswise stake pocket rails mounted in the load floor for insertable stanchions approx. 100 x 50 mm
* 1 additional hook-in intermediate table, approx. 500 mm wide, for the telescopic tube with large cross section, with hardwood covering
* 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), under the load area on the right in direction of travel
* 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), under the load area on the left in direction of travel
* WADER container pockets in the loading platform for transporting: 1x 20' container in the load center, 2x 20' containers, 1x 40' container
* 1 LED work light each left and right in front of the axles
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLETelemax Megatrailer - hydr. gelenkt
Ara
Durumu: yeni, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete inventory of vehicles, including immediately and short-term available vehicles, on our website.
Partial list of equipment. Full specifications available on request.
EQUIPMENT:
* Gooseneck, approx. 4,100 mm length, with central beam
* Extendable loading platform, approx. 9,400 mm length, with rear bevel approx. 350 mm x 10° and integrated mounting rail for attaching loose aluminum loading ramps
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length
* Technical fifth-wheel load: 18,000 kg
* Suitable for tractor units: 4 x 2 and 6 x 2
* TPMS tire pressure monitoring system compliant with ECE R 141
* BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables
* Technical axle load: 12,000 kg per axle
* Air suspension with lift/lower valve
* 235/75 R 17.5 3PMSF twin tires, brand of our choice
* ASPÖCK-UNIBOX
* 3 kW electro-hydraulic unit for hydraulic system operation. Supply connections on the tractor unit not installed
* 4 pairs of recessed lashing rings in the gooseneck outer frame: - the three front pairs installed horizontally (LC 10,000 daN) - the rear pair foldable outward (LC 10,000 daN)
* 4 pairs of stake pockets recessed into the gooseneck outer frame for plug-in stakes approx. 100 x 50 mm
* 2-inch kingpin
* Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg
* On gooseneck and loading platform approx. 32 mm wooden floor encased in ALU omega profiles
* 10 pairs of horizontally recessed, foldable lashing rings in the loading platform outer frame
Kedpfxsy Augdj Alfodk
* 1 pair of lashing rings (LC 10,000 daN) in front of the last axle and at the rear cross member
* All other lashing rings (LC 5,000 daN)
* 6 pairs of stake pockets recessed into the loading platform outer frame for plug-in stakes approx. 100 x 50 mm
* 1 spare wheel holder under the platform on the right side in direction of travel
* 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the platform on the left side in direction of travel
* Bevel at the vehicle’s rear cross member, approx. 350 mm x 10°
* Integrated mounting rail for loose ALU loading ramps at the vehicle’s rear cross member
* 1 pair of drop tube supports at the rear cross member
* Remote steering from front and rear via cable remote control, with single-track control of axles (no installation in the tractor unit)
* Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917)
* 1 LED work lamp each left and right on the front wall, wired to the connection panel for the tractor unit
* One locking point on the extension, every approx. 500 mm
* Holder for plug-in stakes on inside of gooseneck front wall when not in use
* 4 wheel chocks with holder under the loading platform
* Extendable galvanized platform wideners approx. 230 mm per side (without timber floorboards)
* 1 LED work lamp each left and right in front of axles, wired to the tractor unit connection panel
* 2 axle load gauges mounted on the left side including axle load chart
* 1st axle with starting aid
* Under the gooseneck and at the rear end cross member left and right, each with mounting bracket for warning plates
* Acoustic warning signal when reversing
* EU reflector at the rear of the vehicle
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLETelemax Megatrailer - hydr. gelenkt
Ara
Durumu: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.
Extract from the equipment. Full specification available on request.
- Gooseneck, length approx. 4,100 mm with central beam
- Loading platform, double-extendable design, length approx. 9,400 mm
Kdsdpfx Alewvzg Rjfjk
- BPW axles and suspension
- All axles hydro-mechanically forced steered
- Technical axle load: 12,000 kg
- Air suspension with lift and lower valve
- Tyres 235/75 R 17.5 3PMSF twin tyres
- WABCO brand brake system, EBS-E
- 3 kW electro-hydraulic power unit for hydraulic operations (without installation of supply connections on the tractor unit)
- 4 pairs of stake pockets set into the external frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm
- 2-inch king pin
- 8 pairs of stake pockets set into the external frame of the loading platform, for plug-in stakes approx. 100 x 50 mm
- 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left in direction of travel
- Rear and front axle steering controllable via cable remote control with push buttons, including axle alignment control, without installation in the tractor unit
- 2 axle load gauges installed on the left side
- Steel front wall, approx. 1,600 mm high
- 3 transverse stake pocket rails mounted in the floor of the loading platform, for plug-in stakes approx. 100 x 50 mm
- 1 transverse stake pocket rail mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm
- 1 additional lockable INOX toolbox under the loading platform
- WADER container pockets in the loading platform for transporting: 2x 20' containers or 1x 40' container
- Central lubrication system with 2 pumps, BEKAMAX brand
- Complete HRM metallisation (High Resistance Metallisation)
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader - hydr. gelenkt
Ara
Durumu: yeni, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Additional vehicles available – extract from equipment list.
Full equipment details upon request.
GOOSENECK:
* Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Steel front wall, detachable, approx. 400 mm high
* ASPÖCK-UNIBOX on the front control panel with 24N, 24S & 15-pin sockets
* 3 kW electric-hydraulic power pack for controlling hydraulic functions, excluding hydraulic winches
* Outer beams of the gooseneck with mounting holes for bolted lashing rings: first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 pair of horizontal lashing rings in the rear of the gooseneck (LC 10,000 daN)
Kodpjxarmaefx Alfodk
* On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish
* On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized finish
* Approx. 40 mm thick hardwood flooring over the gooseneck, over king pin checker plate covering
* 3.5 inch king pin
* Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide
* Round NATO plug socket on the front control panel (Maeler & Kaege VG 96 917)
* 2 pairs of lashing rings with retaining spring suspended on the outer beams of the gooseneck (LC 5,000 daN)
LOADING PLATFORM:
* Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10°
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the platform length
* BPW axles and suspension, 1st axle with steering, all other axles hydro-mechanically forced steering
* 1st axle with electro-magnetic reverse lock via reverse gear and manual activation
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* 235/75 R 17.5 3PMSF twin tyres – brand at our discretion
* Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg
* On the platform, continuous and between axles interrupted approx. 50 mm thick hardwood flooring (thereby increasing the coefficient of friction). – Slotted holes for hook-in and repositionable bridging elements
* At front of platform – 1 adjustable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. – Front and rear with slotted holes for hook-in and repositionable bridging elements
* 1 pair of lashing rings on the front cross member (LC 10,000 daN)
* 7 pairs of recessed, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN)
* Extensions (galvanized) extendable by approx. 230 mm on each side (without wooden planks)
* 1 pair of mechanical rear supports
* Remote steering from front and rear via cable remote control, with axle tracking control, no installation in tractor unit
* TPMS tire pressure monitoring sensors installed in all wheels
* Platform locking with conically welded locking profiles every 500 mm
* Locking control left and right on the trailer
* For the intermediate table, approx. 300 mm wide, a mechanical lock to secure the table to the extension
* 5 pairs of threaded blocks on the extendable beam for mounting bolt-on rings M20 (LC 5,000 daN)
BRAKE SYSTEM
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (1+3) - hydr. gelenkt
Ara
Durumu: yeni, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our complete range of vehicles, including those available immediately and at short notice, on our website.
Excerpt from the equipment features. Complete equipment details available upon request.
GOOSENECK:
* Gooseneck in SNT design for optimized loading length, approximately 3,700 mm long, with rear bevel about 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Removable steel front wall, approx. 400 mm high
* ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power unit for hydraulic function control, excluding hydraulic winches
* One pair of detachable ALU sideboards on the gooseneck, approx. 400 mm high, anodized finish
* One detachable ALU rear wall on the gooseneck, approx. 400 mm high, anodized finish
* Approx. 40 mm thick hardwood flooring on the gooseneck, checker plate flooring over the king pin
* 2-inch king pin
LOADING PLATFORM:
* Extendable loading platform, approx. 8,800 mm long, with rear bevel about 500 mm x 10°
* Recess in the loading platform extending into the rear bevel, for accommodating the excavator dipper arm, approx. 3,850 x 750 x 210/290 mm (L x W x H)
* TPMS tire pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor is handled via the standardized EBS interface according to ISO 11992. The tractor must be capable of receiving and displaying this data
* TPMS tire pressure sensors installed in all wheels
* BPW axles and suspension, first axle with steering function, all other axles hydro-mechanically forced steered
* First axle with electro-magnetic reversing lock activated by reverse gear and manually
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* Axle tool kit
* Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load approx. 50,000 kg
* 245/70 R 17.5 3PMSF twin tyres. Brand of our choice, load index 143/141J (146/146F)
* Approx. 50 mm thick continuous hardwood flooring on the platform and between axles (increases coefficient of friction)
* Securing of the platform with conically welded locking profiles approx. every 250 mm, including pre-tensioning plate
* One intermediate table, approx. 300 mm wide, for the extension tube with large cross section
* Intermediate table with stepped platform and retractable brackets for aluminum bridging elements
* One pair of lashing rings on the front crossmember (LC 10,000 daN)
* 8 pairs of recessed, outward-folding lashing rings in the outer frame of the platform (LC 10,000 daN)
* Extendable (galvanized) widening sections approx. 230 mm per side (without timber planks)
* Wheel recesses with square climbing rungs, approx. 15 x 15 mm, located in front of the axles, openly extending to the gooseneck cross member, approx. 700 x 410 mm (W x D)
* ALU covers for the wheel recesses, usable as bridging elements for the extension OR as widening boards (if extendable sections are fitted)
* Wheel recesses with square climbing rungs approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D)
* One pair of mechanical rear supports
* Steering from front and rear operable by cable remote control, with single-track monitoring of the axles
HYDRAULIC LOADING RAMPS:
* DR-15/60-900-4350-KG-HV-M One pair of two-part steel ramps, approx. 4,350 mm long and approx. 900 mm wide
Kedoyhkrfspfx Alfedk
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLE6-Achs Multimax Satteltieflader - hydr. gelenkt
Ara
Durumu: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website.
Extract from the specification. Full equipment details available on request.
GOOSENECK
* Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10°
* For tractor units: 6 x 2, 6 x 4, and 8 x 4 short
* Detachable steel front bulkhead, approx. 400 mm high
* 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches
* Outer beams of the gooseneck with mounting holes for bolt-on lashing rings
* 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN)
* 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish
* 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish
* Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin
* 3.5-inch kingpin
* Gooseneck guide plate for the fifth wheel, approx. 500 mm wide
* Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917)
* In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings)
* 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm
Ksdpfxsrgzv Ns Alfjdk
LOADING PLATFORM
* Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10°
* Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length
* BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering
* 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each
* Air suspension with raise and lower valve
* Tyres: 235/75 R 17.5 3PMSF twin tires
* Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg
* Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient)
* Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform
* 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements
* 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN)
* 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN)
* 1 pair of mechanical rear supports
* Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor
* 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535
* Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs
* Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (1+3) - hydr. gelenkt
Ara
Durumu: yeni, azami yük ağırlığı: 50.400 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our complete range of vehicles with immediately and short-term available vehicles on our website.
Excerpt from the equipment. Full equipment details available on request.
GOOSENECK
* Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear taper approx. 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Removable steel front wall, approx. 400 mm high
* ASPÖCK UNIBOX at the front connection rail with sockets
* 3 kW electric-hydraulic power unit for controlling hydraulic functions (except hydraulic winches)
* 1 pair of removable aluminum side boards, approx. 400 mm high, anodized
* One removable aluminum rear board, approx. 400 mm high, anodized
* Approx. 40 mm solid hardwood floor above the gooseneck, over the kingpin with checker plate covering
* 2" kingpin
* Socket at the rear of the gooseneck for aluminum loading ramps
* Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917)
LOADING AREA
* Extendable loading area design, approx. 8,800 mm long, with rear taper approx. 500 mm x 10°
* A recess in the loading platform and into the taper for accepting the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm (L x W x H)
* TPMS tire pressure monitoring system according to ECE R 141
Kdedstx Nwnspfx Alfjk
* BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically forced-steered
* 1st axle with electric-magnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each, air suspension with lifting and lowering valve
* Tires: 235/75 R 17.5 3PMSF, twin mounting
* Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B – static test load: approx. 50,000 kg
* Continuous hardwood flooring approx. 50 mm thick on the loading area and interrupted between axles (increases friction coefficient)
* 1 intermediate platform, approx. 300 mm wide, for the extension tube with large cross-section
* Extendable galvanised widenings, approx. 230 mm per side (without wooden planks)
* Wheel recesses with 15 x 15 mm square climbing bars in front of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D)
* Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts
* Aluminum elements lockable on the extension tubes of the widenings
* Widenable U-profiles for inserting the aluminum covers:
- on the fixed section behind the gooseneck
- on the intermediate platform
- on the extendable loading area
* Wheel recesses with 15 x 15 mm square climbing bars between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D)
* Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening inserts
* Aluminum elements lockable on the extension tubes of the widenings
* 1 pair of mechanical rear supports
* Remote steering from both the front and rear via cable remote control, with axle single-track control, without installation in the tractor unit
HYDRAULIC LOADING RAMPS
* One pair of two-part steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm long, approx. 900 mm wide
* Hydraulically foldable ramp tips
* Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually
* Super Grip rubber flooring approx. 25 mm and steel deck approx. 5 mm as additional
Küçük ilan
Hörsching
1.977 km
Alçak şasi dorse
FAYMONVILLETELEMAX 29,5 METER!!!, DOPPELTELE ,AUSZIEHBAR
Ara
Durumu: kullanılmış, boş ağırlık: 11.800 kg, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2022, toplam uzunluk: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R17,5, Donanım: ABS, Faymonville Telemax F-S43 low loader | 3 axles steered via remote control | Heavy-duty lashing points | SAF axles | extendable | stake pockets | Tyres: 245/70 R17.5 | Gross weight: 48,000 kg, payload: 36,200 kg | Dimensions: 13,500 mm + 7,900 mm + 8,100 mm | Errors, input mistakes and prior sale reserved.
Kdodpfewm I Ipsx Alfjk
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (1+2) - nachlaufgelenkt
Ara
Durumu: yeni, azami yük ağırlığı: 36.410 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website.
Partial list of features. Full specification available on request.
Kedpfoy Auh Ijx Alfodk
NECK:
* SNT-design gooseneck for optimized loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Plug-in steel front bulkhead, approx. 400 mm high
* ASPÖCK-UNIBOX
* 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches)
* Approx. 40 mm hardwood decking above gooseneck
* 2-inch kingpin
* Gooseneck guide plate for fifth wheel, approx. 500 mm wide
* Rear of gooseneck equipped for ALU approach ramps
* Round NATO socket on front connection strip (Maeler & Kaege VG 96 917)
* 4 wheel chocks with holders ahead of the front bulkhead
* 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inside the chassis beam)
EQUIPMENT:
* Loading platform approx. 8,800 mm long, extendable version approx. 4,100 mm, rear with taper approx. 500 mm x 10°
* Recess in the loading area and into the taper for excavator dipper stick accommodation, approx. 2,490 x 750 x 210/290 mm (L x W x H)
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the platform length
* TPMS tire pressure monitoring system per ECE R 141
* BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered trailing
* 3rd axle with electro-magnetic reverse lock, can be activated by reverse gear and manually
* Technical axle load: 12,000 kg per axle, air suspension with lift and lowering valve
* 235/75 R 17.5 3PMSF twin tires. Brand of our choice
* Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load approx. 50,000 kg
* Hardwood floor (approx. 50 mm thick) throughout the load area and interrupted between axles (increases coefficient of friction)
* 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube. Intermediate table with recessed platform and extendable mountings for aluminium bridging elements
* Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate
* 1 pair of lashing rings on the front cross member (LC 10,000 daN)
* 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN)
* 1 pair of fixed wheel recesses ahead of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D)
* Wheel recesses with square climbing strips approx. 15 x 15 mm, with widenings at the bottom (if vehicle equipped with extendable outriggers)
* 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load area between the 1st and 2nd axle
* Wheel recesses with square climbing strips approx. 15 x 15 mm and bottom widenings
* Aluminium covers for wheel recesses ahead of the axles and between the 1st and 2nd axle, which can also serve as extension planks (if vehicle equipped with extendable outriggers)
* Lockable aluminium elements fitted onto the extension pipes of the outriggers
* 1 pair of mechanical rear supports
* 1st axle with traction aid
* Painted sand...
Küçük ilan
Gilze
2.728 km
Düşük yükleyici
FaymonvilleSTN-3U / HYDRAULIC RAMP / LIFT AXLE / SEMI TRAILER
Ara
Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2011, yükleme alanı uzunluğu: 9.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, toplam uzunluk: 12.700 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75R17.5, renk: mavi, Üretim yılı: 2011, Donanım: ABS, = Additional Options and Equipment =
- Lift axle
= Remarks =
SAF axle with drum brakes.
1 x lift axle.
1 x steering axle – self-tracking / trailing steering.
= Further Information =
Axle configuration
Tire size: 235/75R17.5
Brakes: Drum brakes
Suspension: Air suspension
Rear axle 1: Twin tires; Left inner tread: 40%; Left outer tread: 40%; Right inner tread: 40%; Right outer tread: 40%
Rear axle 2: Twin tires; Left inner tread: 70%; Left outer tread: 70%; Right inner tread: 70%; Right outer tread: 70%
Rear axle 3: Twin tires; Steered; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50%
Weights
Unladen weight: 10,500 kg
Payload: 44,500 kg
Gross vehicle weight: 55,000 kg
Identification
Type number: STN-3U / HYDRAULIC RAMP / LIFT A
= Company Information =
ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We strive to provide correct information, but no rights can be derived from the published texts.
Ksdpsy Daxzofx Alfodk
Küçük ilan
Roosendaal
2.760 km
Araba taşıyıcı panelvan
FaymonvilleMAX600-S-4-8.90-U, 4 axles (2 + 2), hydraulic r...
Ara
Durumu: yeni, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2025, yükleme alanı uzunluğu: 8.900 mm, yükleme alanı genişliği: 2.540 mm, toplam uzunluk: 10.940 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 3.750 mm, süspansiyon: hava, lastik boyutu: 245/70-R17.5, Üretim yılı: 2025, = Additional Options and Equipment =
- Fork pockets
= Remarks =
NEW and UNUSED MAXTRAILER MAX600-S-4-8.90-U 4-axle trailer with hydraulically operated and adjustable ramps, loading platform 890 cm with rear bevel, ABS/EBS, TPMS, BPW axles with drum brakes, air suspension with lift and lower valve, axle assembly with drawbar approx. 1750mm and 50mm towing eye, coupling height 830-1010mm when loaded, oversize transport signs, flashing beacon, 6 pairs of sockets for stakes (approx. 100x50mm), 245/70-R17.5 tires
= Additional Information =
Axle configuration
Tyre size: 245/70-R17.5
Axle brand: BPW DRUM
Brakes: Drum brakes
Suspension: Air suspension
Front axle 1: Twin wheels; Max. axle load: 10,700 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100%
Front axle 2: Twin wheels; Max. axle load: 10,700 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100%
Rear axle 1: Twin wheels; Max. axle load: 10,700 kg; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100%
Rear axle 2: Twin wheels; Max. axle load: 10,700 kg; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100%
Weights
Unladen weight: 8,464 kg
Payload: 34,336 kg
Kjdpfeyazbhjx Alfsdk
Gross vehicle weight: 42,800 kg
Functional
Body manufacturer: MAXTRAILER MAX600-S-4-8.90-U
Platform height: 90 cm
Condition
General condition: very good
Technical condition: very good
Visual condition: very good
Further Information
Please contact Arne Honingh for more information.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (2+2) - nachlaufgelenkt
Ara
Durumu: yeni, azami yük ağırlığı: 51.780 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website.
The following is an excerpt from the equipment list. Full equipment details available on request.
Kdsdsyhkrlspfx Alfjk
GOOSENECK:
* Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long, with rear ramped section approx. 1,000 mm x 10°
* Suitable for tractor units: 4x2, 6x2, and 6x4
* Plug-in steel front wall, approx. 400 mm high
* ASPÖCK UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power pack for controlling hydraulic functions (excluding hydraulic winches)
* Outer gooseneck beams with mounting holes for bolted lashing rings
* One mounting hole at the rear upper part of the outer beam for a bolted lashing ring
* 1 pair of screw-in lashing rings included (LC 10,000 daN)
* On the gooseneck: 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodised finish
* On the gooseneck: 1 plug-in aluminum rear board, approx. 400 mm high, anodised finish
* Approx. 40 mm thick hardwood flooring above the gooseneck
* 2" kingpin
* 1 transverse stake pocket rail fitted in the gooseneck deck in front of the ramped section, for plug-in stakes approx. 100 x 50 mm
LOADING AREA:
* Extendable loading area, approx. 8,800 mm long, with rear ramped section approx. 500 mm x 10°
* Recessed well in the deck including the sloped section for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H)
* TPMS tire pressure monitoring system according to ECE R 141
* BPW axles and suspension, 1st and 2nd axles fixed, 3rd and 4th axles steering
* 3rd and 4th axles with electromagnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each, air suspension with lift and lower valve
* Mechanical landing legs with 2-speed gearbox and crank
* Continuous hardwood flooring approx. 50 mm thick on deck and between axles (increases friction coefficient)
* 1 intermediate table with recessed platform, approx. 300 mm wide, for large cross-section sliding tube with sheet metal covering
* 1 pair of lashing rings on front cross-member (LC 10,000 daN)
* 6 pairs of recessed lashing rings in the outer frame, foldable outward (LC 10,000 daN)
* Additionally, 1 pair of external lashing rings on the front cross-member, oriented approx. 90° toward deck (LC 10,000 daN)
* Extendable galvanized side extensions, approx. 230 mm per side (without timber boards)
* 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in deck in front of 1st axle
* Between 2nd and 3rd axles: 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D)
* 1 pair mechanical rear supports
* 245/70 R 17.5 3PMSF dual tires, brand of our choice
HYDRAULIC LOADING RAMPS:
* DR-15/60-900-4350-HB-HV-M
* One pair of two-part steel ramps, approx. 4,350 mm long, 900 mm wide
* Hardwood decking
* Hydraulically folding ramp tips
* Each ramp hydraulically adjustable approx. 235 mm outward and 215 mm inward
* Hardwood decking on rear deck slope
* Ramp with hardwood surface
BRAKING SYSTEM:
* WABCO EBS-E braking system in accordance with EU regulations
SURFACE TREATMENT:
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% al...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (2+2) - nachlaufgelenkt
Ara
Durumu: kullanılmış, azami yük ağırlığı: 51.870 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2025, bir sonraki muayene (TÜV): 03/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of immediately and short-term available vehicles on our website.
Excerpt from the equipment – full specification available on request.
GOOSENECK
Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, rear end tapered approx. 1,000 mm x 10°
* For tractor units: 4x2, 6x2, and 6x4
* Detachable steel front wall, approx. 400 mm high
* At the front connector strip, yellow-red air couplings
* ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic unit for hydraulic operations control
* Outer beams of the gooseneck with mounting holes for bolted lashing rings
* One mounting hole at the upper rear area of the gooseneck outer beams for a bolted lashing ring
* 1 pair of screw-in lashing rings included (LC 10,000 daN)
* On the gooseneck, 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized finish
Kdsdpfjxtc Uhjx Alfjk
* On the gooseneck, 1 plug-in aluminum rear board, approx. 400 mm high, anodized finish
* On the gooseneck, approx. 40 mm thick hardwood flooring
* 2-inch king pin
* Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide
* Rear section of the gooseneck prepared for aluminum loading ramps
* Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917)
LOAD PLATFORM
* Extendable load platform, approx. 8,800 mm long, rear end tapered approx. 500 mm x 10°
* Recess in the platform and in the tapered area for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H)
* TPMS tire pressure monitoring system per ECE R 141
* BPW axles and suspension
* 1st and 2nd axle rigid; 3rd and 4th axles steering trailing axles
* 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* 235/75 R 17.5 3PMSF twin tires
* Mechanical landing gear, 2-speed gearbox with crank handle, JOST Modul B – static test load approx. 50,000 kg
* Continuous hardwood flooring approx. 50 mm thick on platform, interrupted between axles (increases coefficient of friction)
* Platform locking with conically welded locking profiles at approx. every 250 mm
* Long holes at the front of the platform for attachable and repositionable bridging elements
* Intermediate table with stepped platform, approx. 300 mm wide, for the extension tube with large cross-section, sheet metal cover – front and rear long holes for attachable and repositionable bridging elements – detachable cover level with platform
* 1 pair of lashing rings on the front cross beam (LC 10,000 daN)
* 6 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN)
* Additionally, 1 pair of lashing rings outside on the front cross member of the platform, rotated approx. 90° inwards towards the platform (LC 10,000 daN)
* Extensions (galvanized) extendable by approx. 230 mm per side
* 1 pair of fixed, open wheel recesses up to the extension, approx. 700 x 410 mm (W x D), on the platform in front of the 1st axle, wheel recesses with sheet metal cover and square climbing strips approx. 15 x 15 mm every approx. 200 mm
* Between the 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D). Covers for the wheel recesses split lengthwise, with wooden inlay, outer sections with insert position (cut-off text).
Küçük ilan
Brunn am Gebirge
1.828 km
Alçak şasi römork
FaymonvilleF-S43-1AAF MAX 100
Ara
Durumu: kullanılmış, boş ağırlık: 11.550 kg, azami yük ağırlığı: 30.450 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2019, bir sonraki muayene (TÜV): 01/2027, yükleme alanı uzunluğu: 13.450 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 700 mm, yükleme alanı hacmi: 23 m³, süspansiyon: hava, renk: kırmızı, Üretim yılı: 2018, vites türü: mekanik, Donanım: ABS, Boş ağırlık: 11.550 kg, izin verilen azami ağırlık: 42.000 kg, yük alanı (U G Y): 13.450 mm x 2.540 mm x 700 mm, yük hacmi: 23 m³, hava süspansiyonu, kaldırılabilir dingil: 1. dingil, elektronik fren sistemi EBS, arka yönlendirme: 3. dingil, çift lastik donanımlı, minimum uzunluk 13,45 m, maksimum uzunluk 18,20 m, boş ağırlık 11.550 kg, kingpin yükü 18.000 kg, toplam ağırlık 48.000 kg, Almanya için istisna izni, uzatılabilir, hidrolik rampalar ayarlanabilir, 3. dingil zorunlu yönlendirmeli, lastik ebatı 235/75R17,5 çift, vinç, muayene geçerlilik tarihi 01/2027, YAMT13XXXJ0102830, bağlayıcı olmayan teklif, hata ve ara satış hakkı saklıdır. Resim, teklifi tam olarak yansıtmayabilir.
Kdodpfx Aey Dng Telfek
Küçük ilan
Raalte
2.674 km
Yarı alçak yükleyici
FaymonvilleF-S48-1AAA
Ara
Durumu: yeni, dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 12.000 kg, toplam uzunluk: 17.700 mm, toplam genişlik: 2.990 mm, toplam yükseklik: 3.810 mm, süspansiyon: hidrolik, lastik boyutu: 245/70 R17.5 Double Fitted (143/141J), renk: kırmızı, Üretim yılı: 2024, Donanım: hidrolik arka platform, Color: Red
Payload: 100,250 kg
Weights:
Fifth wheel load: 38,000 kg
Axle load: 12,000 kg
Total axle load: 96,000 kg
Gross vehicle weight (GVW): 134,000 kg
Unladen weight: 33,750 kg
Loading capacity: 100,250 kg
Axles:
Ksdpfx Ajuu E Tijlfedk
Axle brand: BPW ECO PLUS
Hydraulic suspension
7 axles with steering (2nd axle fixed)
First two axles liftable
Drum brakes
SN 3020 brake system with ABS and sensors
Tyres: 245/70 R17.5, dual mounted
Load index: 143/141J
Dimensions:
Length: 17,700 mm
Extensions: 19,500 mm
Maximum extended length: 37,900 mm
Loading platform width: 3,990 / 3,450 mm
Loading platform height: 1,050 mm (+/- 150 mm)
Height: 3,815 mm
Additional information:
NATO plug
Hydraulically foldable ramps
Outriggers with boards for widening the loading platform
Electro-hydraulic pump for trailer functions
Spare wheel with holder
Work lights
Rear bumper with lighting
2.0” kingpin
Central lubrication system
Lashing rings
Wooden loading platform
Warning signs for oversized loads
Remote control
General Information
Year of manufacture: 2024
Axle configuration
Tyre size: 245/70 R17.5, dual mounted (143/141J)
Axle brand: BPW ECO PLUS
Brakes: Drum brakes
Suspension: Hydraulic suspension
Rear axle 1: twin tyres; lift axle; max. axle load: 12,000 kg; steered; left inside tread: 100%; left outside tread: 100%; right inside tread: 100%; right outside tread: 100%
Rear axle 2: twin tyres; lift axle; max. axle load: 12,000 kg; left inside tread: 100%; left outside tread: 100%; right inside tread: 100%; right outside tread: 100%
Rear axle 3: twin tyres; max. axle load: 12,000 kg; steered; left inside tread: 100%; left outside tread: 100%; right inside tread: 100%; right outside tread: 100%
Rear axle 4–8: twin tyres; max. axle load: 12,000 kg; steered; left inside tread: 100%; left outside tread: 100%; right inside tread: 100%; right outside tread: 100%
Weights
Unladen weight: 33,750 kg
Payload: 100,250 kg
Gross vehicle weight: 134,000 kg
Functional
Loading platform height: 105 cm
Extendable body: Yes
Condition
Overall condition: Very good
Technical condition: Very good
Optical condition: Very good
Financial information
Price: On request
Further information
Please contact Stefan Schaapveld for more information...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Planenaufbau
Ara
Durumu: yeni, azami yük ağırlığı: 40.320 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website.
Equipment excerpt. Full equipment details available upon request.
Gooseneck:
* Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring, approx. 30 mm thick. Loading area with 5 pairs of folding lashing rings to the outside (LC 5,000 daN)
* 3 pairs of folding lashing rings to the outside (LC 10,000 daN)
* 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN)
* Hardwood flooring, approx. 48 mm thick, with checker plate surface above the axles
Landing legs:
JOST mechanical landing legs with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t)
Tyres:
* Tyres 205/65 R17.5 - brand of our choice
TPMS:
* TPMS tyre pressure monitoring system pursuant to ECE R 141
Axles:
* BPW axles, two rigid axles, two steering axles
* Air suspension with lifting/lowering feature
* Drum brakes
* Self-tracking steering axles with electro-magnetic reverse lock, activated via reverse gear or manually
Brake system:
* WABCO braking system according to EU regulations with EBS-E (4S3M)
Electrical system:
* Electrical system according to EU standards, 24 volt LED lighting by ASPÖCK-NORDIK (ASS3)
* All LED side marker lamps flash synchronously with the indicator
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731, 15-pin ISO-12098
Steel construction:
* Steel construction made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork:
* HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection
* Trailer color RAL 3002 Carmine Red
* Wheels Silver Grey
* Tarpaulin RAL 9006 (brilliant direct)
Options included:
* One mounting bracket each for warning signs on the left and right at the gooseneck and rear, including socket
* 2-inch king pin
* Galvanized steel bulkhead
* Yellow-red air couplings at the galvanized front connection strip
* 4 wheel chocks with holder mounted on the bulkhead
* 3-level wooden boards
* Galvanized folding supports under the loading area chamfer
* Mount for beacon at the rear of the trailer
* Height-adjustable tarpaulin structure – approx. 3,960 mm
* Galvanized front bulkhead with a tensioning mechanism for the sliding curtains. Height-adjustable by approx. 400 mm
* EDSCHA roof, forward-slidable on ALU roof bearer profiles (bolted to front and rear wall)
* 3 pairs of sliding stanchions in the loading area
* The body can be hydraulically widened at the rear to the left and right by approx. 750 mm
* Sliding roof with fold-up portal beam
* Sliding tarpaulin with 700 mm surplus in length, with tension straps approx. every 600 mm. Height to top edge of body approx. 3,960 mm (loaded)
* Driving with the sliding roof open is not permitted and will cause damage to the tarpaulin
* Rear of the body with closed anodized ALU swing doors
* Hook-in rail for ALU drive-on ramps at the rear of the vehicle
* Control valves for hydraulic body widening mounted on the right trailer side
* White reflective tape in accordance with EU regulations, red tape at the rear
* Electro-hydraulic unit mounted at rear under loading area
* Mud flaps at the rear of the trailer
* European reflective warning signs (red-yellow) at the rear of the tr
Ksdpjy Aug Djfx Alfjdk
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX110 Semi-Tieflader
Ara
Durumu: yeni, azami yük ağırlığı: 36.590 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website.
Excerpt from the equipment list. Full equipment details available on request.
Gooseneck:
* Gooseneck with front chamfered corners approx. 45°, and with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading Area:
* Extendable loading area with rear bevel approx. 1,000 mm x 8°
* 5 pairs of fold-out lashing rings (LC 5,000 daN)
* 3 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of recessed lashing rings in the front of the loading floor (LC 10,000 daN)
* Cut-outs in the outer frame for attaching tension straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles with tread plate covering
Tyres:
* Tyres 245/70 R 17.5 3PMSF – brand of our choice. Load index (146/146F)
TPMS:
* TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the truck is via the standardized EBS interface ISO 11992. For correct display, the truck must be able to receive and show this data.
Landing Legs:
Kedpfx Ajy Auifelfodk
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, all axles hydro-mechanically forced-steered
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* Axle tools
Brake System:
* WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit
Steel Construction:
* Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical System:
* Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin connection according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Paintwork:
* Complete steel structure is automatically blast-cleaned after welding using a shot blasting machine
* Second abrasive blasting with corundum for optimal adhesion of the coating system
* Final painting with 2 coats of 2-component topcoat, single colour in RAL 3002 Carmine Red, according to RAL System 841GL
* Rims in silver-grey
* Rear section metalized and painted in RAL 9010 (pure white)
Accessories:
* 2-inch king pin
* One galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings on the galvanized front connection strip
* Spare wheel holder in front of the front wall (without spare wheel)
* Electro-hydraulic power pack
* Remote steering front and rear via cable remote control with push buttons, with single-track axle control (without installation in the tractor unit)
* Attachment bar for ALU loading ramps on gooseneck with integrated impact protection
* At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket
* Holder for a beacon at the rear of the trailer
* Galvanized foldable supports under the rear bevel of the loading area
* 1 pair of recessed lashing rings along the centre beam at the rear in the inclined section (LC 10,000 daN)
* Axle load gauge with load diagram
* On the tread plates on the gooseneck and loading area, a painted sand layer for slip protection
* On the gooseneck, removable aluminium side and rear boards, approx. 2,440 x 400 mm (L x H). The rear galvanized...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader 2tlg. Rampen
Ara
Durumu: yeni, azami yük ağırlığı: 58.860 kg, toplam ağırlık: 73.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete inventory of vehicles, including units available for immediate or short-term delivery, can be found on our website.
Excerpt from the equipment list. Full specifications available on request.
Gooseneck:
* Gooseneck with beveled front corners approx. 45°, rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick
Extendable loading platform:
* Loading platform in extendable design with rear bevel approx. 500 mm x 8°
* 8 pairs of foldable lashing rings (LC 10,000 daN)
* 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN)
* Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering
Two-section steel ramps:
* One pair of galvanized two-section steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber covering
* Ramp with hydraulically folding ramp sections
* Hydraulic lifting unit, hydraulically adjustable
* Maximum load per pair: 50,000 kg
* In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the overall vehicle length of 16,500 mm when in driving position
Axles:
* BPW axles and suspension, 1st axle steered (leading), 2nd and 3rd axles fixed, 4th and 5th axles trailing steer, air suspension with lift/lower function, drum brakes
* Trailing steering axles with electro-magnetic reverse lock, activated automatically when reversing or manually
* Technical axle load: 12,000 kg each
Tyres:
* Tyres 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* Tyre Pressure Monitoring System (TPMS) compliant with ECE R 141. Data transfer to the truck unit is via the standardized EBS interface in accordance with ISO 11992. For correct display, the truck unit must be able to receive and display this data.
Landing legs:
* JOST mechanical landing legs with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Brake system:
* Wabco braking system in accordance with EU regulations with EBS-E (4S3M), without connector lines to the tractor unit
Steel construction:
* Steel structure made from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicators
* ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin connectors as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Paintwork:
* Complete steel construction automatically shot blasted after welding using a wheel blast system
* Second blasting using corundum for optimal adhesion of paint system
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection
* Final coating using 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, as per RAL system 841GL
* Rear section metallized and painted in RAL 9010 pure white
Including the following additional equipment:
* 2-inch king pin
* One galvanized steel front wall approx. 400 mm high
* One spare wheel holder in front of the front wall
* Yellow-red air couplings at the galvanized front connector panel
* A bracket for a rotating beacon at the rear of the trailer
* Galvanized supports under the platform’s rear bevel
Kdsdpfjy Augwsx Alfsk
* Super Grip rubber ma
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Plus Satteltieflader Hebebett
Ara
Durumu: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available for immediate delivery and short-term availability, on our website. Extract from the equipment specification below.
Kdsdpey Auhhefx Alfjk
Complete equipment details available upon request.
GOOSENECK:
* Gooseneck in SNT design to optimize cargo deck length, approximately 3,700 mm long, with a rear bevel approx. 1,000 mm x 6°
* For tractor units: 4 x 2 and 6 x 2
* ASPÖCK-UNIBOX
* Grating surface on the gooseneck and rear bevel with 5 mm sheet metal reinforcement
* 2-inch king pin
* Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide
* Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917)
* On the gooseneck: 1 pair of removable aluminium drop sides, approx. 400 mm high, anodized finish
* 1 LED work light mounted at the top left and right of the front wall, wired to the trailer head connection bar
CARGO DECK:
* Cargo deck length approx. 9,600 mm, rear bevel approx. 900 mm x 6°
* Deck area behind the gooseneck hydraulically raisable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg
* Full-length grating surface with approx. 5 mm steel support plate on the lift bed and cargo deck for additional reinforcement, designed for point loading
TYRES:
235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion
* TPMS tire pressure monitoring system according to ECE R 141
AXLES:
* BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle steering
* 3rd axle with electro-magnetic reverse lock, can be activated via reverse gear and manually
* 1st axle with traction aid
* Technical axle load: 12,000 kg each
* Air suspension with raise and lower valve
HYDRAULIC LOADING RAMPS:
* 1 pair of two-piece AXS steel ramps with grating surface, approx. 4,920 mm long and 900 mm wide
* Ramp tips hydraulically foldable
* Ramps can be hydraulically shifted approx. 235 mm outward and approx. 365 mm inward individually
* Flashing lights on the outer sides of the ramp tips, with switch next to the ramp controls
* Ramp safety in transport position using quick release
* Painted sand coating on the outer frame of the ramp and on the ramp tip
* Mechanical drop-leg side supports in the ramps to assist when docking at unloading bays
* Controls for the hydraulic ramps located on the right side of the vehicle
BRAKE SYSTEM:
Brake system by WABCO EBS-E, compliant with EU regulations
SURFACE TREATMENT:
* HRM metallization of the complete chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure optimal corrosion protection
PAINTWORK:
* Semi-trailer in carmine red (RAL 3002)
* Rims in silver grey
* Drop sides ALU natural
* Wheel hubs per axle manufacturer specification
* Lamp panel pure white (RAL 9010)
EQUIPMENT:
* Front wall made of steel, removable, approx. 1,600 mm high, incl. interface bar for service lines to tractor unit installed approx. 1,000 mm from lower edge of external frame profile
* Lashing chain attachment points on the interior of the front wall, left and right, with aluminium tray below on left and right for storing chains or tension straps
* Behind the front wall, approx. 12 mm thick DELIGNIT lining, bolted
* 2 additional pairs of bolted lashing rings (LC 5,000 daN)
* Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Wire cable approx. 24 m long, cable diameter approx. 9.5 mm, including cable pressure roller
* Deflection pulley for the cable winch with shackle and bolted lashing point
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Planenaufbau
Ara
Durumu: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and soon-to-be available models, on our website.
Excerpt from the equipment. Full specification available upon request.
Gooseneck:
* Gooseneck with rear bevel, approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring, approx. 30 mm thick
Load area:
* Load area with rear bevel, approx. 1,000 mm x 8°
* 5 pairs of fold-out lashing rings (LC 5,000 daN)
* 3 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN)
* Hardwood flooring, approx. 48 mm thick; over the axles, chequer plate covering
Two-part steel ramps:
* 1 pair of galvanized, two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating (C40/5). Point load approx. 2.8 t on a 20 x 20 cm area
* Ramps with hydraulically foldable sections and hydraulic lifting device
* Maximum load per pair: 30,000 kg
Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 fixed axles, 1 trailing steer axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lift and lower valve
Tyres:
* Tyres: 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* Tyre Pressure Monitoring System (TPMS) according to ECE R 141
Braking system:
* WABCO braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit
Steel construction:
* High-strength fine-grained steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Coating:
* HRM metallization of the entire chassis using ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection
* Final coating with 2 layers of 2-component topcoat, single-colour, RAL 3002 carmine red, according to RAL System 841GL
* Rear section metallized and painted in RAL 9010 (pure white)
* Wheel rims in silver
Incl. accessories:
* One bracket each for warning signs (left/right) at gooseneck and rear, incl. socket
* 1 spare wheel carrier under the load area on the right
Kodpfx Ajy Auhujlfjdk
* 2-inch kingpin
* One galvanized steel front wall
* At the galvanized front connection rail: yellow-red air couplings
* 4 wheel chocks with holders at the front wall
* 3-tier wooden planks
* Galvanized folding supports under the rear bevel
* Holder for beacon at the rear of the trailer
* Height-adjustable curtain structure – approx. 3,960 mm
* Galvanized front wall with locking mechanism for sliding curtains, height adjustable by approx. 400 mm
* EDSCHA brand roof, forward-slidable on aluminium roof profile (bolted to front and rear walls)
* 3 pairs of movable stanchions in the load area
* Body hydraulically expandable to left/right at rear by approx. 750 mm
* Sliding roof with high-lift portal carrier
* Sliding curtain with approx. 700 mm extra length, tensioning straps spaced approx. 600 mm apart. Height O
Güven mührü
Machineseeker tarafından sertifikalandırılmış bayiler

Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader
Ara
Durumu: yeni, azami yük ağırlığı: 37.980 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website.
Excerpt from the equipment list. Full equipment details upon request.
Gooseneck:
* Gooseneck with front beveled corners approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Load platform in extendable design:
* Extendable load platform with rear bevel approx. 1,000 mm x 8°
* 6 pairs of folding lashing rings to the outside (LC 5,000 daN)
* 3 pairs of folding lashing rings to the outside (LC 10,000 daN)
* 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN)
* Cutouts in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering
Landing legs:
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Tyres:
* Tyres 235/75 R 17.5 3PMSF – make of our choice
TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface according to ISO 11992. For correct display, the towing vehicle must be capable of transmitting and displaying this data.
Axles:
* BPW axles and suspension, 2 rigid axles, 1 self-steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reversing lock, can be activated via reverse gear and manually
* Air suspension with raise/lower valve
* Axle tool
Brake system:
* Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit
Steel construction:
* Steel construction of high-strength fine-grained steels
* Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa)
Painting:
* Complete steel structure automatically blast-cleaned after welding with shot-blasting system
* Secondary blasting with corundum for optimum coating adhesion
* Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 carmine red, according to RAL system 841GL
* Wheel rims in silver grey
* Rear section metalized and painted in RAL 9010 (pure white)
* Paint system tested in salt spray fog test according to ISO 9227-NSS
* Cavity sealing with special wax
Electrical system:
* Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO 1185 24S ISO 3731 15-pin ISO 12098
Accessories included:
* 2-inch king pin
* One galvanized steel front wall, approx. 400 mm high
* One spare wheel holder in front of the front wall
* Yellow-red air couplings on the galvanized connection strip at the front
Kdedey Aufmopfx Alfok
* 4 wheel chocks with holder at the front wall
* Provision at the rear of the gooseneck for ALU loading ramps
* Galvanized folding supports under the rear bevel of the loading area
* On the gooseneck and rear panel left and right, each with a holder for warning boards including socket
* Load manometer to determine axle loads including load diagram
* On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable (superstructure length approx. 2,560 mm)
* One galvanized toolbox integrated in the beveled gooseneck
* 3 pairs WADER C
Küçük ilan
Raalte
2.674 km
Düşük yükleyici
FaymonvilleGigaMax 1+4 / F-S45-2GXX
Ara
Durumu: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 12.000 kg, yükleme alanı uzunluğu: 17.320 mm, yükleme alanı genişliği: 3.200 mm, yükleme alanı yüksekliği: 400 mm, toplam uzunluk: 17.320 mm, toplam genişlik: 3.200 mm, süspansiyon: hidrolik, lastik boyutu: 245/70 R 17.5 | 143/131L (146/146F), renk: beż, Üretim yılı: 2021, Colour: Yellow
Loading capacity: 64,800 kg
Main Features
Manufacturer: Faymonville
Model: GigaMax 1+4 / F-S45-2GXX
Chassis Number: YAFTL1009M0027562
Year of Manufacture: 2021
Weights/Loading Capacity
King-pin load: 25,000 kg
Axle load: 12,000 kg
Total axle load: 12,000 kg x 5 = 60,000 kg
Gross vehicle weight (GVW): 84,200 kg
Ksdevzaanepfx Alfjdk
Unladen weight: 20,200 kg
Payload capacity: 64,800 kg
Axles
Pendle axles
Hydraulic suspension
All axles with hydraulic steering
WABCO braking system with EBS-E
Tyres: 245/70 R 17.5 | 143/131L (146/146F)
Dimensions
Overall length: 17,320 mm
Loading platform length: 6,800 mm
2x extension beams: 2,000 mm / 3,000 mm
Loading platform width: 2,750 mm / 3,200 mm
Loading platform height: 400 mm
Ground clearance: 150 mm
King-pin height: +/- 1,340 mm
Additional information:
Gooseneck with integrated 1-axle pendle axle
Hatz diesel powerpack
Hydraulically operated gooseneck
Aluminium side boards on gooseneck
2x extension beams: 2,000 mm / 3,000 mm
Excavator trough
Lashing rings
Stainless steel toolbox
Spare wheel + holder
Rear under-run protection with lighting
King-pin 3.5"
Central greasing system with 2 BEKAMAX pumps
= Further Information =
General Information
Year of manufacture: 2021
Axle Configuration
Tyre size: 245/70 R 17.5 | 143/131L (146/146F)
Suspension: hydraulic suspension
Front axle: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles
Rear axle 1: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles
Rear axle 2: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles
Rear axle 3: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles
Rear axle 4: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles
Weights
Unladen weight: 20,200 kg
Payload: 64,800 kg
Gross vehicle weight: 85,000 kg
Functional
Platform height: 40 cm
Extendable structure: Yes
Condition
Technical condition: very good
Visual condition: very good
Financial Information
Price: On request
Additional information
Please contact Stefan Schaapveld for further information.
Küçük ilan
Roosendaal
2.760 km
Yarı alçak yükleyici
Faymonvilleextentadable 20m disconnectable front + 42000kg...
Ara
Durumu: mükemmel (kullanılmış), makine/araç numarası: YAFTL2007F0017329, ilk tescil: 09/2015, yükleme alanı uzunluğu: 20.180 mm, yükleme alanı genişliği: 3.000 mm, renk: diğer, Üretim yılı: 2015, Damages: None
YAFTL2007F0017329
Kdedoymrb Sopfx Alfjk
= Further Information =
Unladen weight: 13,600 kg
Payload: 28,400 kg
gross vehicle weight (GVW): 42,000 kg
Technical condition: very good
Visual condition: very good
Price: On request
= Company Information =
If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours.
Prices are exclusive of VAT.
No rights can be derived from the provided information.
Office Phone:
MOB: Dutch - English - German - French - Spanish - Italian (available on WhatsApp and Viber).
MOB: Dutch (available on WhatsApp and Viber).
When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details as stated on our website. If you receive different information, please contact us.
If you have any doubts, please call us so we can verify the invoice and/or payment.
Bank details:
Rabobank
Laan van Limburg 2
4701BP Roosendaal
IBAN: NL 89 RABO
EORI/VAT/TAX: NL857401B(01)
BIC/SWIFT: RABONL2U
Küçük ilan
Agios Athanasios
966 km
YATAY PRES
HYDR.80t
Ara
Durumu: kullanılmış, YATAY PRES
Kdedpfjihvnmjx Alfok
BASINÇ 80t
Sizin için aramayı kolaylaştırıyoruz: "faymonville telemax sattelauflieger - hydr. gelenkt"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.




















































































































































































































































