Çalışma platformlu yarı römork

FAYMONVILLE MAX Trailer MAX210 Telesattel

Durumu: yeni, toplam ağırlık: 48.000 kg, azami yük ağırlığı: 38.400 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete inventory of vehicles, including those available immediately or at short notice, can be found on our website. Excerpt from the equipment list. Complete equipment details available upon request. Loading Platform: * Extendable loading platform with pneumatically operated locking mechanism * Loading platform fitted with approx. 30 mm thick hardwood floorboards * 7 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for inserting tie-down straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24t (test load 50t) Tyres: * Tyre size 385/65 R 22.5 Axle: * BPW axles and suspension, all axles forced-steer by hydro-mechanical means * With disc brakes * Technical axle load: 10,000 kg (ET 0) * Air suspension with lifting and lowering valve Braking System: * WABCO brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Finish: * High-quality single-tone, two-component (2K) top coat in RAL 3002 Carmine Red Gjdpfxoxl Nf Dj Ad Rsuh Accessories: * Remote steering from the front and rear, operable via cable remote control with push-buttons, with single-track axle control (installation in the tractor unit not included) * Electro-hydraulic power unit * 4 wheel chocks with brackets mounted on the front bulkhead * 2-inch kingpin * Front galvanized connection plate with yellow and red air couplings * Mounting bracket for a rotating beacon at the rear of the trailer * 10 pairs of stake pockets for drop-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform * 1 spare wheel carrier under the loading platform, right-hand side in the direction of travel (no spare wheel included) * Load gauge for determining axle loads including load chart Incl. Special Equipment: * Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets on the loading platform, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking point is provided in the extension for a 45' container * 4 pairs of transverse stake pocket rails mounted on the loading platform for drop-in stanchions approx. 100 x 50 mm * Storage rack for up to 9 pairs of drop-in stanchions mounted internally on the front wall * Step ladder mounted left and right in direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front left under the loading platform in direction of travel * Additional INOX toolbox, approx. 1,200 x 460 x 550 mm, under the loading platform in direction of travel, left-hand side * Loading platform with approx. 30 mm thick wooden floor inset into Omega profiles * Lift axle on the front axle with control via TEBS E * Centralized lubrication system BEKAMAX (Pico) with standard grease NLGI-2 * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * HRM metallization (High Resistance Metallisation)

Durumu: kullanılmış, toplam ağırlık: 48.000 kg, azami yük ağırlığı: 38.080 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2025, bir sonraki muayene (TÜV): 02/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Cargo Area: - Cargo area in extendable design with pneumatically actuated locking mechanism - Cargo area with solid wooden floor approx. 30 mm thick, framed in omega profiles - 7 pairs of lashing rings, foldable outward (LC 5,000 daN) - 3 pairs of lashing rings, foldable outward (LC 10,000 daN) - Cutouts in the outer frame of the cargo area for attaching tension straps (LC 2,000 daN) Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: - BPW axles and suspension - All axles hydro-mechanically forced-steered - With disc brakes - Technical axle load: 10,000 kg each (ET 0) - Air suspension with lifting and lowering valve - Axle tools Tyres: - Tyres 385/65 R 22.5 Braking System: - Braking system compliant with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Warning Signs: - Mountings for warning plates on the gooseneck and rear panel, left and right, including socket Electrical System: - Electrical system according to EU regulations - Lighting 24 volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets, connection according to ISO 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: - Steel structure made of high-strength fine-grain steels - Steel grades: S355J2+N / S355MC (yield strength 355MPa), S690QL / S700MC (yield strength 690MPa) Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single color, in RAL 3002 carmine red Gjdjxf Sifopfx Ad Reuh - Wheels in silver, add-on parts as selected by the manufacturer - Rear section metallized and painted in RAL 9010 (pure white) Included Accessories: - 2-inch kingpin - 4 wheel chocks with holders on the front wall - Remote steering from front and rear via cable remote control with push buttons, including axle tracking control (without installation in tractor unit) - Manual and documentation on USB stick - Electro-hydraulic power unit - Yellow-red air couplings on the galvanized front connection panel - Yellow reflective tape according to EU regulations, lateral, on the extension and rear of the trailer - European reflective plates (red-yellow) on the rear of the trailer - One mud flap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - 10 pairs of stake pockets for insertable stakes 100 x 50 mm on the outer frame of the cargo area - One spare wheel holder under the cargo area on the right-hand side in the direction of travel - 80 km/h speed stickers on rear and both sides - Load gauge for axle load determination including load diagram - One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high - 6 pairs of WADER container locks in the cargo area, suitable for 1 x 20' container, 2 x 20' containers or 1 x 40' container; an additional locking point provided in the extension for a 45' container - 4 pairs of crosswise stake pocket strips installed in the cargo area, for insertable stakes approx. 100 x 50 mm - Storage for insertable stakes inside on the front wall - Access ladder installed on left and right in direction of travel - One INOX toolbox, approx. 1,200 x 460 x 55

Durumu: kullanılmış, toplam ağırlık: 48.000 kg, azami yük ağırlığı: 36.300 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2024, bir sonraki muayene (TÜV): 08/2025, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles with immediately and short-term available stock on our website. Extract from the equipment list. Full specification available on request. - Loading platform with double-extension design and pneumatically operated locking mechanism - A fixed intermediate platform, approx. 250 mm wide, is mounted on the central beam - BPW axles and suspension, all axles hydro-mechanically forced-steered - Air suspension with lift and lower valve - Tyres 385/65 R 22.5 - JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) - Braking system in accordance with EU regulations, incl. EBS-E (2S2M) - Disc brakes - 2-inch kingpin - Electro-hydraulic unit - Remote steering at the front and rear via cable remote control - 10 pairs of stake pockets for insertion stakes approx. 100 x 50 mm in the outer frame of the loading platform - Load gauge to determine axle loads including load chart - Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high - 6 pairs of WADER container pockets in the platform for 1 x 20' container, 2 x 20' containers or 1 x 40' container; for extension an additional locking point is provided for a 45' container - 5 pairs of crosswise stake pocket strips mounted in the platform - Storage for max. 9 pairs of insertion stakes approx. 100 x 50 mm, located internally at the front wall - One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted under the loading platform at the front left and right Gsdpfx Adepkx Eas Rjuh - Central lubrication system with 2 BEKAMAX pumps (Pico) - 2 LED reversing lights mounted on the rear panel - Acoustic warning signal when reversing - Rear underrun protection, left and right, on the rear cross member - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - HRM Metallisation (High Resistance Metallisation) - Single-tone paint in RAL 3002 carmine red

Durumu: yeni, toplam ağırlık: 48.000 kg, azami yük ağırlığı: 34.660 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Cargo Bed * Double extensible version with pneumatically operated locking mechanism * 2 pairs of recessed lashing rings (LC 5,000 daN) Gjdpfjk Ugacjx Ad Rjuh * 1 pair of recessed lashing rings (LC 10,000 daN) * 7 pairs of outwards-folding lashing rings (LC 5,000 daN) * 3 pairs of outwards-folding lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the cargo bed for attaching tensioning straps (LC 2,000 daN) Landing Legs * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres * 235/75 R 17.5 3PMSF Axles * BPW axles, hydro-mechanically forced steered * Air suspension with lift and lower valve Brake System * In compliance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel Construction * Made from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * High-quality, durable corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-tone top coat in RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 (Pure White) * Wheels in silver Including Accessories * Remote steering front and rear via cable remote control with push-buttons, with single-track axle alignment (without installation in tractor unit) * Electro-hydraulic unit * 4 wheel chocks with holders on the front wall * 2-inch kingpin * At the galvanised connection strip at the front, yellow-red air couplings * Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer * European reflective plates (red-yellow) at the rear of the trailer * One mud flap at the rear of the trailer * Manual and documentation on USB stick * Cargo bed with robust hardwood floor * 10 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the cargo bed * Bracket for a rotating beacon at the rear of the trailer * Galvanised supports beneath the sloped area of the cargo bed * Bracket for a rotating beacon at the rear of the trailer * Mounting rail for aluminium drive-on ramps at the rear of the vehicle * 80 km/h speed stickers on the rear and both sides * Load gauge for determining axle loads, including load diagram * One galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable pump protection * Spiral cable to supply the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between trailer and tractor unit with connector (NATO-NATO) * Non-slip sand-coated surface on the central beam * 6 pairs of WADER container pockets in the cargo bed, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; additional locking position provided in the extension for a 45' container * 5 pairs of crosswise stake pocket strips installed in the cargo bed for 100 x 50 mm stakes * Storage for up to 9 pairs of 100 x 50 mm stakes, inside on the front wall * One INOX toolbox, approx. 1,500 x 390 x 810 mm, mounted under the cargo bed on the left and right in the direction of travel * Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm, with