Alçak şasi dorse

FAYMONVILLE MAX510-Z-2H-ATX-A-6.85-PA

Technical Data MAX510-Z-2H-ATX-A-6.85-PA

Speed: 80 km/h
Gross weight: 47,000 kg
Fifth wheel load: 23,000 kg
Axle load: 24,000 kg
Gooseneck length: 3,750 mm
Loaded saddle height: 1,200 mm
Rear steering radius: 2,300 mm
Loading platform length: 6,850 mm
Extendable by: 5,500 mm
Loading height at maximum load: 350 mm
Chassis length: 2,600 mm
Rear chassis loading height at max. load approx: 1,005 mm
Suspension travel: -150/+450 mm
Axle spacing: 1,360 mm
Overall width: 2,540 mm
Gross weight depends on fifth wheel load.

Lowbed: Lowbed with external beams, extendable version "SUPER LOW" design, length approx. 6,850 mm.
Lowbed with fixed hardwood floor approximately 40 mm thick and mechanical locking device. Supply lines are protected inside the extendable beams and automatically adjust to the respective lowbed length.
5 pairs of lashing rings, foldable outward (LC 10,000 daN).
6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings.

Rear chassis: Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at rear.
2 pairs of lashing rings, foldable outward (LC 10,000 daN).
1 pair of lashing rings, flat in the trough (LC 8,000 daN + 5,300 daN).
2 pairs of pocket sockets for stanchions 100 x 50 mm in the external frame.
Dwjdpfxoizu Nwj Af Dec

Gooseneck: Gooseneck in SNT design to optimize usable platform length, length approx. 3,785 mm.
Gooseneck hydraulically lift/lowerable and detachable.
Technical fifth wheel load: 23,000 kg
For tractor units: 4x2, 6x2, and 6x4

PENDLE-AXLE: “PENDLE-AXLE”, all axles hydro-mechanically forced steered. Hose rupture valve on the axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and plug pins for securing in raised position. Axles finished with two coats of 2-component paint, single color "FAY-Grey-34-0260".
Technical axle load: 12,000 kg
Hydraulic axle compensation. Axle tools.

Brake system: Brake system in accordance with EU regulations, with EBS-E (2S2M) without connecting lines to the tractor unit.

Electrical system: Electrical system according to EU regulations, 24V lighting ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection strip with 24N, 24S, and 15-pin sockets. Connection according to ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098

Steel construction: Steel construction made of high tensile fine-grained steels. Steel grades:
- S355J2+N/S355MC (yield strength 355MPa)
- S690QL/S700MC (yield strength 690MPa)

Painting: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer. Premium two-component (2K) topcoat in one RAL color of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint possible.

Tyres: Tyres 245/70 R 17.5 3PMSF
Manufacturer’s choice. Load index (146/146F).

Prepared for fitting of bolt-on container positions for 1x 20' or 1x 40' container on the external beams. Without container locks.

• 2” king pin
• Galvanized steel front wall approx. 400 mm high
• 1 spare wheel with holder in front of the front wall
• 2 wheel chocks with holder on the front wall
• Yellow-red air couplings on the galvanized connection strip at the front.

Remote steering from front and rear via cable remote control with pushbuttons, with single-track axle monitoring (without installation in the tractor unit).

Hydraulic connections from the gooseneck to the lowbed

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.