Alçak yükleyici yarı römork

Fliegl DTS 300

Durumu: kullanılmış, boş ağırlık: 6.520 kg, azami yük ağırlığı: 23.480 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, yükleme alanı uzunluğu: 8.610 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/140J, arka lastik boyutu: 235/75R17,5 ---/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Loading platform length (low bed) approx. 6.50 m, total loading platform length approx. 8.60 m, loading height approx. 900 mm. Vehicle is being offered on behalf of a bank. -- Subject to typographical errors, mistakes, and modifications. Sample images -- More data at: ! Gtedpfx Aox Sxrvec Ast More details: !

Durumu: yeni, makine/araç numarası: f8fb99947a1c19bc4d63549ff, boş ağırlık: 6 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 24 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing race Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flaps Half-shell fenders on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles 1 plastic tool box, with shelf, w=620/h=360/d=440 mm, lockable with padlock (padlock not included) Extendable widening to 3,000 mm (not at the rear chamfer) (the track width of machines or vehicles to be transported must not exceed 2,550 mm outer frame width) Central storage compartment for wooden beams on the loading area 70 mm wooden beams for widening to 3,000 mm Lashing points on low loader 1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated 5t 7 pairs of mushroom lashing points, recessed at top and side in outer frame, each rated 10t 1x at the front on the gooseneck 6x in the drop deck First lashing point 250 mm from front, last max. 250 mm from rear, distance between lashing eyes not greater than 1,100 mm 5 pairs of stake pockets recessed in side frame, internal dimension 70 x 40 mm (convertible for 5t ring lashing eyes, not included) 2 pairs of additional fold-down lashing eyes, each rated 10t 1x on the gooseneck (projecting) 1x recessed in the floor behind the last axle Trailer turntable drawgear Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (equalising rocker) Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice with M&S marking Steel wheels in twin arrangement, factory silver Brake System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connection lines to the towing vehicle ABS and ALB, with ABS connector at front, with connection cable Brand: Wabco or Knorr Note: This trailer may only be towed by vehicles which ensure the proper functioning of the ABS! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red rear outline marker lights 2 x 7-pin non-interchangeable plugs at front, with connection cable 1 LED rotating beacon with holder, switched via parking lights (removable beacon) Gedpfxji Riwfj Ac Astt 2 pairs of warning panels, double LED illuminated and extendable to 3,000mm Floor Gooseneck at front with steel/chequer plate covering Storage box recessed on the transition slope to gooseneck After that, 70 mm softwood floor, steel/chequer plate covering in wheel arch area Rear slope with 70 mm softwood floor Low-bed platform including rear slope 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety support, foldable underneath (prevents lateral slipping of the ramps, not in conjunction with hydraulic side ramp shift) Wooden inlay on ramps Spring lifting assistance Operating instructions At 10,000 kg axle load, an exemption permit is required, only indivisible loads possible!!! The stated total weight is technically possible; depending on the load, the gross weight may not be achievable while adhering to permissible axle, support, and kingpin loads. (Poor driving and trailing behaviour may result from incorrect load distribution) Country of registration/Plates Country of registration: Germany Approval according t

Durumu: yeni, boş ağırlık: 6.060 kg, azami yük ağırlığı: 17.940 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, renk: gümüş, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: Bovenden, döner uyarı lambası, 3 dingil, SAF dingilleri, döner tabla, yaprak yaylı süspansiyon, ABS (antiblokaj sistemi), 3 metreye kadar genişletilebilir, bağlama halkaları, iki parçalı rampa, mekanik rampalar, uzatılabilir çekici oku, yandan alüminyum yan koruma, çift lastik, EBS. Üst yapı: Yükleme uzunluğu yaklaşık 8,5 m, 3,05 m'ye kadar genişletilebilir. Gösterim aracı! Gtsdpfx Acjxbttqe Aet Arka dengeleme sistemi olan parabolik yaylı, 3x10 ton SAF dingil, izin verilen toplam ağırlık 30 tona kadar mümkün, uzunluğu ayarlanabilir çekici oku. AKSESUAR BİLGİLERİ GARANTİSİZ OLUP, değişiklik, ara satış ve hatalar saklıdır!

Durumu: yeni, makine/araç numarası: d461243f559015adca5bb372c, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis for Low-Loader Trailer Steel welded construction Turntable bogie with heavy-duty slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear spray flap Half-shell fenders on 1st axle with anti-spray flaps Additional anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox, with tray, width = 620 mm, height = 360 mm, depth = 440 mm, lockable with padlock Extendable width up to 3,000 mm Central storage compartment for wooden planks in the loading area 70 mm wooden planks for extension to 3,000 mm Lashing rings for low-loader (40 securing points) 1 pair of lashing cutouts indented in the front longitudinal beam (cranked zone), each rated for 10 t 4 pairs of lashing holes in the outer frame, each rated for 5 t (for tensioning straps) 7 pairs of lashing pins recessed in the top and side of the outer frame, each rated for 10 t 1 x at the front on the cranked zone Gtedpoi Ri Dlefx Ac Ajt 6 x in the low-bed First lashing ring 250 mm from front and last one max. 250 mm from rear; spacing between lashing rings not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm, convertible to 5 t ring lashing eyes 2 additional pairs of folding lashing rings, each rated for 10 t 1 x on the cranked zone (protruding) 1 x recessed in the floor behind the last axle Drawbar / Turntable coupling Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker balance) Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 anti-swap coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front, including connecting cable Make: Wabco, Knorr or Haldex Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin anti-swap plugs at the front, with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning panels, LED illuminated and extendable to 3,000 mm Floor Front cranked section with steel / tread plate surface Storage box recessed in the ramp transition to cranked section Followed by 70 mm softwood floor, in wheel arch area with steel / tread plate surface Rear bevel with 70 mm softwood floor Low-loader area incl. rear bevel: 6,500 mm Loading Ramps Steel ramps, 2,800 mm length, 750 mm width, laterally adjustable Wooden inlay Hydraulically operated via tractor auxiliary drive with restrictor, operation on left side, FR Hydraulic connection with SVK coupling NW 10/3, including connecting hose Registration / Plates Country of registration: Germany 24/7 Service Hotline Prepared for two-line plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Warning panel according to ECE - 70 Paintwork Frame hot-dip galvanized including passivation 15-year warranty against rust-through Drawbar galvanized or black, manufacturer’s choice Ramps hot-dip galvanized Note! These are archive images!

Durumu: yeni, makine/araç numarası: 628cde0fe99cc2d3c8eaa8dd8, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Lowbed trailer chassis Steel welded construction Turntable with robust ball bearing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width rear splash guards Half-shell fenders on axle 1 with anti-spray mudflaps, anti-spray mudflaps behind axles 2 and 3 1 plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with a padlock (padlock not included) Extendable widenings up to 3,000 mm Storage compartment for timber planks in the center of the loading area 70 mm timber planks for extension to 3,000 mm Lashing eyes for low loader (40 lashing points) 1 pair of lashing cutouts in the front longitudinal beam, recessed in the cranked area, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching lashing straps) 7 pairs of recessed lashing mushrooms on top and side of outer frame, each 10 t 1 front cranked area 6 in the lowbed deck First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 2 pairs of additional folding lashing eyes, each 10 t 1 located in the cranked area (protruding) 1 recessed in the floor behind the last axle Towing equipment for turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles (manufacturer’s choice) Gtsdpfji Ri Ddex Ac Ajt Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and tires 235 / 75 R 17.5 (manufacturer’s choice) Steel rims, dual configuration, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads front, with connecting lines to the tractor unit, ABS and ALB, with ABS plug front, with connection cable Brand: Wabco or Knorr Electric system 24 volt, multi-chamber lights, yellow LED side marker lights 2 white front position lights 2 white/red lane marker lights rear 2 x 7-pin non-interchangeable plugs at front, with connecting cable 1 LED rotating beacon light with bracket, switched via parking light (removable lamp) 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm Floor Front crank area with steel / chequer plate covering Toolbox recessed in the ramp bevel to the crank Then 70 mm softwood floor, steel / chequer plate covering in wheel arch area Rear ramp bevel with 70 mm softwood floor Lowbed loading area incl. rear ramp bevel: 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-covered With spring assist Country of approval / Number plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning board according to ECE-70 Painting Frame hot-dip galvanized incl. passivation 15-year warranty against corrosion Drawbar galvanized or black, as per manufacturer’s choice Loading ramps hot-dip galvanized Attention! These are archive images!

Durumu: yeni, makine/araç numarası: 2dff0c136c85096f36822a0bb, boş ağırlık: 7.150 kg, azami yük ağırlığı: 16.850 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring, tool box recessed into turntable front section Foldable rear supports 2 wheel chocks with holders Aluminum side underrun protection Full-width rear spray flaps Extendable widening sections up to 3,000 mm (not including rear taper) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central storage compartment for timber boards on the loading platform 70 mm timber boards for widening up to 3,000 mm Lashing eyes for low loader 3 pairs of 10 t lashing points integrated into the front floor 6 pairs of 10 t lashing mushrooms, recessed into the upper and side outer frame 1x in the neck area The remainder are distributed in between, distance not greater than 1,200 mm 1x rear taper 5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Towing Device Trailer Turntable Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Gtedpfxsi Riy Eo Ac Aot Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker compensation) Brake System 2-line compressed air brake system Colored line routing for easy servicing. Spring-loaded parking brake included. 2 non-interchangeable coupling heads at the front, with connecting lines to tractor unit ABS and ALB with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Twin steel rims, factory silver Electrics 24 Volt, multi-chamber tail lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2x 7-pin non-interchangeable connectors at the front, with connecting cable 1 LED beacon with holder, operated via parking light (removable lamp) 2 pairs of warning signs, double LED illuminated and extendable to 3,000mm Floor Front area steel floor, then 70 mm softwood floor, steel/chequer plate covering in the wheel arch area Rear taper with 70 mm softwood floor Low-bed area incl. rear taper: 8,200 mm Loading Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber deck included With spring-assisted lifting Operating Notes At 10,000 kg axle load, an exemption certificate is required! Only indivisible loads permitted! The total weight specified is technically feasible; depending on the cargo, the total weight may not be achievable due to permissible axle, support, and fifth wheel loads. (Poor driving and trailing performance possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips as per ECE R 048, side white and rear red Paint finish Frame DB 7350 Nova grey 10-year corrosion warranty Drawbar galvanized or black, manufacturer’s choice Steel loading ramps hot-dip galvanized Please note: Archive images!

Durumu: yeni, makine/araç numarası: ede0610378cbe39cc4883251d, boş ağırlık: 24.000 kg, azami yük ağırlığı: 7.550 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction 1st pair of wheel recesses integrated into the steel platform in the driving aisle area, tapered for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! The frame is 400 mm higher than the wheel recess in the main beam area. If machines are to be transported and the total height needs to be checked, we kindly request the technical datasheet of the machine types with exact specifications (if total height is exceeded -> customer risk, approval required). Depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer. Turntable with heavy-duty ball bearing slewing ring, toolbox integrated into the turntable front section Rear support foldable 2 wheel chocks with holders Side underrun protection in aluminium Rear mudflaps across the full width Extendable widening to 3,000 mm (not in rear bevel area) (The track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 3 pairs of lashing points integrated into the front floor, each 10 t Incl. 6 pairs of lashing mushrooms recessed in the upper and side external frame, each 10 t 1 x in the gooseneck area The rest distributed in between, distance not greater than 1200 mm 1 x rear bevel 5 pairs of stake pockets recessed into the external frame, inside 70 x 40 mm (convertible to 5 t ring lashing points, not included) Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Gtodpfoi Ri Ryex Ac Aot Axles + Suspension SAF drum brake axles Axle/undercarriage laser measured for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Brake System 2-line compressed air brake system Colour-coded piping for easy servicing Spring-actuated parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the truck ABS and ALB, with ABS socket at the front, including connection cable Attention: The trailer may only be towed by vehicles that ensure the effective operation of the ABS! Wheels and Tyres 235 / 75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red rear marker lights 2 x 7-pin non-interchangeable plugs at the front, with connection cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, incl. followed by 70 mm softwood floor, wheel arch areas with steel/checkered plate covering Rear bevel with 70 mm softwood floor Low loader platform incl. rear bevel 8,200 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring lift assistance Operating Instructions With 10,000 kg axle load an exemption permit is required, only indivisible loads possible!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and fifth wheel loads (Poor driving and trailing behaviour possible due to incorrect load distribution) Country of Approval / Plates Country of approval: Germany Incl. with Dekra approval and certificate (acco

Durumu: yeni, makine/araç numarası: 195f80ad09517628522e33a91, boş ağırlık: 7.300 kg, azami yük ağırlığı: 16.700 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis low-loader trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Aluminum side underrun protection Full-width rear mudflap Quarter-shell mudguards in front of the 1st axle 1st pair of wheel recesses embedded in the deep bed lane area after the step, sloped for entry, approx. 1600 mm long at the bottom, approx. 400 mm deep. Note: The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the deep bed lane area, sloped for entry, approx. 600 mm long at the bottom, approx. 300 mm deep. Note: The frame in the main beam area is 300 mm higher than the wheel recess. Extensions telescopic to 3,000 mm (not at rear taper) (The track width of the construction machines or vehicles to be transported, however, must not exceed the external frame width of 2,550 mm) Extensions telescopic to 3,000 mm, also in the wheel recesses at the bottom, foldable at the wheel recess extensions (widening not at the rear taper) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Lashing eyes low-loader 1 pair of lashing cutouts in the front longitudinal beam, recessed in the area of the step, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for attachment of lashing straps) 7 pairs of lashing mushrooms recessed at the top and side in the external frame, each rated for 10 t 1 x front in the step 6 x in the deep bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm Drawgear - Turntable trailer drawbar Drawbar with tested 40 mm drawbar eye Axles + Suspension SAF drum braked axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mountings Wheels and tyres 235/75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Brake system Gtedpfx Acoi Ri Rvs Ast 2-line air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, including interconnecting cable. Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lights, yellow side LED lighting, 2 white position lights in front 2 white/red lane marker lights at rear 2 x 7-pin foolproof plugs at front with connecting cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front step with steel/chequer plate covering Storage box recessed in the approach slope to the step, followed by 70 mm softwood floor, in the wheel housing area with steel/chequer plate covering Rear slope with 70 mm softwood floor Low-loader area including rear slope 6500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable with wooden covering with spring-assist lifting Operating notes For an axle load of 10,000 kg, a special permit is required; only indivisible loads permitted!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achieved while observing the permissible axle, load and fifth wheel loads. (Poor d