Kullanılmış Faymonville Max Trailer Max110 Semi-Tieflader satın al (40.866)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX510 Tiefbett 2x12 t PA
Çağrı
Koşul: yeni, azami yük ağırlığı: 33.750 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory, including units immediately and short-term available, on our website.
Extract from the equipment list. Full specification available upon request.
Iaedpfx Aloxbmn Ujcst
Gooseneck:
- Gooseneck in SNT design to optimize loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- Technical fifth wheel load: 23,000 kg
- Compatible with tractor units: 4x2, 6x2, and 6x4
Lowbed:
- Lowbed with external beams, extendable SUPER LOW design, approx. 6,850 mm length
- Lowbed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking
- Supply lines protected within the extendable beams, automatically adapting to the lowbed length
- 5 pairs of lashing rings, foldable to the outside (LC 10,000 daN)
- 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings
Rear Chassis:
- Rear chassis with closed outer frame, checker plate covering, and continuous prism-shaped excavator recess, approx. 1,250/700 x 505 mm, open at the rear
- 2 pairs of lashing rings, foldable to the outside (LC 10,000 daN)
- 1 pair of lashing rings recessed in the trough, LC 16,000 daN
- 1 pair of lashing rings recessed in the trough, LC 10,600 daN
- 2 pairs of stake pockets for removable stakes, approx. 100 x 50 mm in the outer frame
Pendel Axles:
- Pendel axles, all axles forced steered by hydro-mechanical linkage
- Hose rupture valve on axle leveling cylinder with automatic reset function
- Hydraulic cylinders with shut-off valves and pre-insert for securing in the lifted position
- Axles painted with 2 layers of single-color 2-component paint in FAY Grey 34-0260
- Technical axle load: 12,000 kg each, with hydraulic axle compensation
- Axle tools
- Tyres: 245/70 R 17.5 3PMSF (brand at our discretion), load index (146/146F)
TPMS:
- TPMS tyre pressure monitoring system compliant with ECE R 141
Brake System:
- Wabco braking system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit
Electrical System:
- Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK lighting (ASS3)
- All LED side marker lights flash with the indicator
- ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets, according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Steel Construction:
- Steel structure made of high-strength fine-grained steels
- Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)
Coating:
- Complete steel structure is automatically shot-blasted after welding using a turbine blasting machine
- Second blasting treatment with corundum for optimum coating adhesion
- Full chassis metallized by HRM process with ZINACOR 850 (85% Zinc/15% Aluminium) for superior corrosion protection
- Final coating: two layers of 2K topcoat, single-color in RAL 3002 carmine red, according to RAL system 841GL
Including the following additional features:
- 2-inch king pin
- One galvanized steel headboard, approx. 400 mm high
- Remote steering from front and rear via cable remote with pushbuttons, axle alignment control (without installation in the tractor unit)
- Electro-hydraulic power unit
- 2 pairs of bolted container locks on external beams, including 2 pairs of container locks for 1 x 20' or 1 x 40' container
- On the gooseneck: detachable aluminium drop sides and rear wall, approx. 2,440 x 400 mm (LxH)
- Rear galvanized removable stakes
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLEMAX Trailer MAX210 Telesattel
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle stock with immediately and short-term available vehicles on our website.
Excerpt of the equipment. Complete equipment list available upon request.
Loading platform:
* Extendable loading platform with pneumatically operated locking mechanism
* Loading platform with approx. 30 mm thick wooden planks
* 7 pairs of folding lashing rings to the outside (LC 5,000 daN)
* 3 pairs of folding lashing rings to the outside (LC 10,000 daN)
* Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN)
Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Tyres:
* Tyres 385/65 R 22.5, brand of our choice
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. The tractor unit must be capable of receiving and displaying this data for accurate monitoring.
Axle:
* BPW axles and suspension
* All axles hydro-mechanically forced-steered
* Disc brakes
* Technical axle load: 10,000 kg each (ET 0)
Iasdpfew Tpr Isx Alcot
* Air suspension with lifting and lowering valve
* Axle tools
Brake system:
* WABCO braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit
Steel construction:
* Steel construction made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa)
Electrical system:
* Electrical system in accordance with EU regulations
* 24 Volt LED lighting ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Painting:
* Complete steel construction automatically blast-cleaned by shot blasting machine after welding
* Second blasting with corundum for optimal coating adhesion
* Final coating with 2 layers of 2K top coat, single-colour in RAL 3002 Carmine Red according to RAL System 841GL
* Rims in silver grey
* Rear section metallized and painted in RAL 9010 (Pure White)
* Metallic paint not possible
* Coating structure tested in salt spray test according to ISO 9227-NSS
* Cavity sealing with special wax
Accessories:
* Remote steering from the front and rear via cable remote control with push buttons, with axle tracking control (installation in the tractor unit not included)
* Electro-hydraulic unit
* 4 wheel chocks with holders at the front wall
* 2 inch king pin
* At the galvanized connection rail in front, yellow-red air couplings
* Mountings for warning boards left and right on neck and rear, including socket
* 10 pairs of stanchion pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform
* One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
* 6 pairs of WADER container locks in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking point provided in the extension for a 45' container
* 4 pairs of transverse stanchion pockets mounted across the platform for plug-in stakes approx. 100 x 50 mm
* Storage for up to 9 pairs of plug-in stakes bolted to the front wall on the inside
* Climbing ladder mounted left and right in the direction of travel
* One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front under the loading platform on the l
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX510 Tiefbett 2x10 t
Çağrı
Koşul: yeni, azami yük ağırlığı: 25.645 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website.
Excerpt from the equipment - full specification upon request.
Loading area:
- Low-bed with central beam, extendable version, length approx. 6,750 mm
- 5 pairs of outward-folding lashing rings (LC 5,000 daN)
Iasdpfsxf Silsx Alcet
- 1 pair of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of horizontal lashing rings at the rear of the platform (LC 10,000 daN)
Gooseneck:
- Gooseneck hydraulically raisable/lowerable and detachable
Rear running gear:
- Rear running gear, short design, with closed outer frame and tread plate cover
- Running gear with excavator recess, rear half closed to accommodate air tanks
- 2 pairs of outward-folding lashing rings (LC 5,000 daN)
- 1 pair of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of horizontal lashing rings at the rear of the running gear (LC 10,000 daN)
Axles:
- BPW axles, hydro-mechanically forced-steered
- Air suspension with lift and lower valve
Tyres:
- Tyres 245/70 R 17.5 3PMSF
- TPMS: Tyre Pressure Monitoring System according to ECE R 141
Braking system:
- Wabco braking system according to EU regulations, with EBS-E (2S2M)
Paintwork:
- High-quality single-tone 2-component (2K) topcoat in RAL 3000 flame red
Including the following additional equipment:
- 2 king pins
- Galvanized steel front wall, height approx. 400 mm
- Remote steering override (front and rear) via cable remote control with pushbuttons, with axle tracking control (no installation in the tractor unit)
- Electro-hydraulic power unit
- Load manometer for axle load determination, incl. load diagram
- On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable (body length approx. 2,560 mm)
- Separate air connection with air gun on the gooseneck
- 2 work lights with switches on the trailer, mounted on the gooseneck platform left and right
- 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck
- 6 pairs of stanchion pockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the loading area, 2 pairs in the outer frame of the running gear
- Galvanized extensions, extendable by approx. 230 mm per side
- Hydraulic lines from gooseneck to low-bed with multi-coupling instead of screw couplings (no guarantee on seals)
- Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, with removable pump cover
- 2 pairs of WADER container pockets in the loading area, for 1 x 20' container
- 1 removable galvanized intermediate platform with 1 pair of WADER container pockets
- 1 pair of steel ramps to bridge the pick-up hooks of the low-bed
- Sand coating on the loading area as slip protection
- HRM metallization (High Resistance Metallization)

Şimdi bilgi alın
+44 20 806 810 84
+44 20 806 810 84
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLEMAX Trailer MAX200 Telesattel
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 37.535 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2024, bir sonraki muayene (TÜV): 08/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle stock, including vehicles available immediately or at short notice, on our website.
Excerpt of equipment. Full equipment details available on request.
Loading Platform:
* Extendable loading platform with pneumatically operated lock
* 7 pairs of folding lashing rings (LC 5,000 daN)
* 3 pairs of folding lashing rings (LC 10,000 daN)
* Cut-outs in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN)
Landing Legs:
* JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load)
Axles:
* BPW axles, air-suspended, with disc brakes (approx. 430 mm), lift/lower function. Technical axle load: 10,000 kg per axle (ET0)
* Trailing steering axle with electromagnetic reverse lock, activated via reverse gear or manually
* Axle tools
Iodpfexgk U Nsx Alceat
Tyres:
* Tyres 385/65 R 22.5
Brake System:
* Brake system in accordance with EU regulations with EBS-E (2S2M), without connection lines to the tractor unit
Steel Structure:
* Construction from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork:
* First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer
* High-quality 2-component (2K) top coat in RAL 3002 Carmine Red
* Rims in silver
* Rear section metallised and painted in RAL 9010 (Pure White)
Includes the following additional equipment:
* Yellow-red air couplings at the galvanized front connection bar
* 4 wheel chocks with holder
* 2-inch king pin
* Yellow reflective tape complying with EU regulations on the sides, extension, and rear of the trailer
* European reflective panels (red-yellow) at the rear of the trailer
* Loading platform with approx. 30 mm thick wooden floor, edged in Omega profiles
* 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, located in the outer frame of the platform
* Storage for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted inside the front wall
* 1 spare wheel carrier under the platform, left side in the direction of travel, without spare wheel
* One mudflap at the rear of the trailer
* Manual and description on USB stick
* Mount for a rotating beacon at the rear of the trailer
* At the gooseneck and on the rear panel left and right, each with a holder for warning signs including socket
* 80 km/h speed sticker at the rear and on both sides
* Load gauge for axle load determination, including load diagram
* Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high
* 6 pairs of WADER container locks embedded in the platform for 1x 20' container, 2x 20' containers or 1x 40' container flush at the rear
* INOX toolbox, approx. 600 x 350 x 600 mm, mounted under the platform, left side in direction of travel
* 4 pairs of longitudinal stake pocket rails mounted on the loading platform, for plug-in stakes 80 x 50 mm
* Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition
* 2 LED reversing lights mounted on the rear panel
* HRM metallisation (High Resistance Metallisation)
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer 3+5 Tiefbett (Baggerbett)
Çağrı
Koşul: yeni, azami yük ağırlığı: 91.640 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment specification. Complete equipment details available on request.
Gooseneck
* Hydraulically lift/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4.
3-Axle Compact Front Bogie
* Hook mounts at front and rear, length: approx. 3,560 mm
* Chassis width: approx. 2,850 mm
Iasdpfsuvbdtsx Alcet
Excavator Deck
* Telescopic excavator deck BB-A with drive-over bridge hooks at the front and pin-eye coupling at the rear
* Base width: approx. 2,850 mm Length: approx. 7,150 mm Beam height: approx. 430 mm Beam width: approx. 1,350 mm
* Loading height approx. 580 mm with ground clearance approx. 150 mm
5-Axle Rear Bogie
* Mechanical pin-eye coupling for mounting a lowbed at the front, end crossmember at the rear
* Chassis width: approx. 2,850 mm
* Chassis length: approx. 6,840 mm
* 3-axle pendle axle
Front Bogie
* PENDLE-AXLE, all axles hydro-mechanically forced steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position
* Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Tyres on front bogie: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J pendle axle
5-Axle Rear Bogie
* PENDLE-AXLE, all axles hydro-mechanically forced steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position
* Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Tyres on rear bogie: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J
Paintwork
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection
* Final coating with 2 coats of 2K topcoat, solid in RAL 3002 Carmine Red in accordance with RAL System 841GL. Rims in silver-grey
Including Accessories
* Steel front wall, approx. 400 mm high
* Removable ALU side walls and rear wall on gooseneck, approx. 400 mm high, anodized finish
* 3.5 kingpin
* BEKA-MAX central lubrication for one gooseneck
* Multi-coupling hydraulic connectors on gooseneck
* BEKA-MAX central lubrication for one 3-axle bogie
* One 7-pin socket left and right at rear of the front bogie for warning panels
* Thread insert option (ø approx. 40 mm) every approx. 500 mm on the outer top chord of the excavator deck's outer tube for lashing rings (LC 16,000 daN)
* Folding extensions with steel mattress, width adjustable from approx. 2,850 mm to approx. 3,250 mm
* The steel mattresses can be inserted in 2 positions to provide a lowered loading area. Please refer to the respective load diagram for permissible payload depending on width extension
* Steel mattresses with rubber flooring, approx. 12 mm thick
* One 7-pin socket left and right, front and rear on rear bogie for warning panels
* BEKA-MAX central lubrication for one 5-axle bogie
* Socket on rear bogie for cable remote control of rear steering
* Rear bogie with trough
* Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck, left and right
*
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLEMAX Trailer MAX410 Ballastauflieger
Çağrı
Koşul: yeni, azami yük ağırlığı: 52.810 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment. Full equipment details available upon request.
Cargo Area:
* Cargo area fitted with approx. 30 mm thick hardwood flooring
* 10 pairs of folding lashing rings (LC 10,000 daN)
Landing Legs:
* Hydraulic landing legs
TPMS:
* TPMS tire pressure monitoring system in accordance with ECE R 141. Data transfer to the truck is via the standardized EBS interface per ISO 11992. The truck must be capable of transmitting and displaying this data for correct read-out.
Axles and Suspension:
* BPW axles, technical capacity 12,000 kg each; first axle fixed, all other axles hydro-mechanically steered, mounted on turntable
* Air suspension with raise/lower valve
* Axle tools
Tyres:
Iasdpfx Aexttc Aolcot
* Tyres 445/65 R 22.5 169 K
Electrical System:
* Electrical system per EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting
* ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets
* Connectors per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Braking System:
* Wabco braking system per EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit
Steel Structure:
* Structure made from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Painting:
* Entire steel structure automatically shot-blasted after welding
* Second abrasive blasting with corundum for optimal coating adhesion
* Final painting in 2 layers of 2K top coat, single color RAL 1007 Narcissus Yellow, per RAL System 841GL
* Rear section metallized and painted RAL 9010 (Pure White)
* Rims in silver grey
* Paint structure tested in salt spray test per ISO 9227-NSS
* Cavity sealing with special wax
Including Accessories:
* Cargo area with approx. 30 mm thick hardwood flooring
* 2 inch kingpin
* One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high
* Yellow-red air couplings on the galvanized front connector strip
* One bracket each for warning signs, left and right at the gooseneck and at the rear panel, including socket
* Remote axle steering control from front and rear using cable remote and push buttons, with single-track axle monitoring (no installation in tractor unit)
* Electro-hydraulic power unit
* 12 pairs of stake pockets for removable stakes, approx. 100 x 50 mm, in the outer frame of the cargo area
* Load gauge for axle load determination including load chart
* Lift axle on the front axle with control by TEBS E
* 5 pairs of crosswise stake pocket strips, for removable stakes approx. 100 x 50 mm
* One INOX toolbox 1,200 x 460 x 550 mm, front left under cargo area (in driving direction)
* One shunting coupling with reinforcement attached to the rear crossmember
* BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable cover for the pump
* 2 LED reversing lights mounted on the rear panel
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)
Küçük ilan
Andelst
2.692 km
Yarı alçak yükleyici
FaymonvilleF-S42-111A SEMI DIEPLADER/TIEFLADER/LOWLOADER
Çağrı
Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2020, renk: kırmızı, Üretim yılı: 2020, Donanım: ABS, Rear axle 1: Twin tyres
Rear axle 2: Twin tyres; Steered
Unladen weight: 8,060 kg
Loading platform height: 86 cm
Extendable superstructure: Yes
Technical condition: Very good
Optical condition: Very good
Price: On request
FAYMONVILLE F-S42-111A SEMI LOWLOADER
Iajdpfox Upxxsx Alcet
2x SAF axles
1x Steering axle (trailing)
Tyre size
Extendable loading platform
Length 680 cm + 420 cm extendable, total loading platform length 1,100 cm
Loading platform width 254 cm
Loading platform height ±86 cm
Gooseneck length 330 cm
Lashing eyes, pockets, twistlocks
Follow us on Instagram: geurtstrucks
Low loader is year of manufacture 2016, but sold as new in 2020
Wir sprechen Deutsch
Hablamos Español
We speak English
Küçük ilan
Andelst
2.692 km
Yarı alçak yükleyici
Rojo TrailerKT3 ST EXTENDABLE SEMI DIEPLADER/TIEFLADER/LOWL...
Çağrı
Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, renk: mavi, Üretim yılı: 2019, Donanım: ABS, = Additional Options and Accessories =
- Lifting axle
- Air suspension
= Further Information =
Year of manufacture: 2019
Rear axle 1: Twin tires; Steering
Rear axle 2: Twin tires; Steering
Rear axle 3: Twin tires; Lift axle; Steering
Technical condition: Very good
Visual condition: Very good
Price: On request
ROJO TRAILER KT3 ST EXTENDABLE SEMI LOWBED
3X SAF HYDRAULICALLY STEERED AXLES
LAST AXLE IS LIFTABLE
RADIO REMOTE CONTROL
AIR SUSPENDED
TYRE SIZE 245/70/R17.5
GOOSENECK LENGTH 308 CM
EXTENDABLE LOADING PLATFORM
LOADING PLATFORM LENGTH 678 CM + 300 CM EXTENDABLE; TOTAL PLATFORM LENGTH 978 CM
PLATFORM WIDTH 254 CM
LOADING FLOOR HEIGHT ± 89 CM
LENGTH FROM KINGPIN TO END OF LOWBED 927 CM
TOTAL LENGTH 987 CM
4X HYDRAULIC SUPPORT LEGS
LASHING EYES FOR ROPES
PREPARED FOR TWISTLOCKS FOR 20 FT CONTAINER
FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS, COMMERCIAL VEHICLES, AND MACHINES FOR SALE.
WIR SPRECHEN DEUTSCH
WE SPEAK ENGLISH
Iedpfxjuxxc Te Alcsat
HABLAMOS ESPAÑOL
Küçük ilan
Vitez
1.560 km
Yarı Römork Kutu FAYMONVILLE F-S43-1EBB
FAYMONVILLEF-S43-1EBB
Çağrı
Koşul: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 8.160 kg, azami yük ağırlığı: 39.000 kg, toplam ağırlık: 32.490 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.000 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 2.700 mm, yükleme alanı hacmi: 85 m³, süspansiyon: hava, dingil mesafesi: 2.500 mm, renk: sarı, Üretim yılı: 2015, Donanım: ABS, Römork Özellikleri:
Üretim yılı: 2015
Kasa tipi: Cam taşıma
Azami teknik olarak izin verilen ağırlık (kg): 39.000
İzin verilen taşıma kapasitesi (kg): 32.490
Araç ağırlığı (kg): 8.160
Renk: SARI
Iajdpfxswtmfto Alcst
Kayıt Bilgileri:
İlk tescil: 24.11.2023
Tescil geçerlilik tarihi: 24.11.2025
Küçük ilan
Kirchberg
2.302 km
Alçak şasi dorse
Semi Trailer 26 FGM 2-Achs Tieflader
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 19.080 kg, toplam ağırlık: 28.480 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2025, bir sonraki muayene (TÜV): 08/2026, DİKKAT: Sadece devirme hidrolikleriyle çalıştırılır! BPW 10 ton akslar, 2 akslı yönlendirme, DİKKAT: Sadece devirme hidrolikleriyle çalıştırılır! Kingpin yüksekliği 1,25 m, DİKKAT: Sadece devirme hidrolikleriyle çalıştırılır! Kingpin yüksekliği 1,25 m, hidrolik 1400x700 + manuel 700.
Iaedpfx Asykgkcelcst
Küçük ilan
Kirchberg
2.302 km
Alçak şasi dorse
Semi Trailer 19 AF 1-Achs Tieflader Plane
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 16.300 kg, toplam ağırlık: 22.000 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 08/2022, bir sonraki muayene (TÜV): 09/2026, BPW 10t axles, frame construction made of high-strength Domex 700, total loading area 11,800 mm, load bed length 8,350 mm, Knorr brake system EBS 4s/2k (ASR), rear folding support legs rated at 25,000 kg, pneumatic valve for adjustment of 4 wheel blockers, electric winch with remote control, 3x2 lashing rings integrated in the outer frame of the platform (8 t), aluminum frame L: 2,300 mm - W: 500 mm, hot-dip galvanized, toolbox, rolling platform bed, extendable bumper, ramp holder.
Iaedeih E Hyjpfx Alcet
Küçük ilan
Raalte
2.674 km
Yarı alçak yükleyici
FaymonvilleMAX-110-Z-4AA-9.30-U
Çağrı
Koşul: yeni, dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 12.000 kg, toplam uzunluk: 9.300 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, dingil mesafesi: 1.360 mm, renk: mavi, Üretim yılı: 2023, Donanım: hidrolik arka platform, Farbe: Blau
Nutzlast: 54.465 kg
Hauptmerkmale:
Hersteller: Faymonville
Modell: MAX 110-Z-4AA-9.30-U
Fahrgestellnummer: YAMT14XX4N0107629
Baujahr: Neu und ungebraucht
Gewichte / Zuladung:
Sattellast: 23.000 kg
Achslast: 12.000 kg
Gesamte Achslast: 48.000 kg
zul. Gesamtgewicht (zGG): 71.000 kg
Leergewicht: 16.535 kg
Nutzlast: 54.465 kg
Achsen:
Achsenhersteller: BPW
Hydraulische Lenkung
Luftfederung mit Hub-/Senkventil
WABCO-Bremssystem
Bereifung: 245/70 R17.5 – Michelin (Lastindex 146/146 F)
1. Achse als Liftachse
Abmessungen:
Ladeflächenlänge: 9.300 mm
Ausziehbar um: 6.500 + 6.800 mm
Ladeflächenbreite: 2.540 mm
Ladeflächenhöhe: 900 mm
Zusätzliche Informationen:
Doppelt ausziehbare Ladefläche
Containerverriegelungen
Ausschubträger in der Breite + Holz-Ausbauten für Breitenverbreiterung
Zurringe
Satz doppelt faltbarer Auffahrrampen
Zentralschmierung
1x Reserverad + Halter
JOST-Stützwinde
24-Volt-Elektrosystem
Sattelkupplung 2.0”
Eine verzinkte Stahl-Bordwand
Elektrisch betriebene Hydraulikpumpe
Handlenkung
Twistlocks
= Additional Information =
General Information
Year of manufacture: 2023
Axle Configuration
Tyre size: 245/70 R17.5
Suspension: Air suspension
Rear axle 1: Twin tyres; Lift axle; Max. axle load: 12,000 kg; Steered; Axle brand: BPW; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100%
Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100%
Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100%
Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100%
Weights
Unladen weight: 16,535 kg
Payload: 54,465 kg
gross vehicle weight: 71,000 kg
Iaedpfx Alouu Hcfjcjt
Functional
Loading floor height: 900 mm (Note: original value '65535 cm' likely an error, adapted here to correct spec)
Extendable chassis: Yes
Condition
General condition: Excellent
Technical condition: Excellent
Visual condition: Excellent
Financial Information
Price: On request
Additional Information
For further information, please contact Stefan Schaapveld.
Küçük ilan
Legden
2.617 km
Alçak şasi dorse
FAYMONVILLEF-S43-1AAF Multimax Tieflader,Radmulden 45 t.
Çağrı
Koşul: ikinci el, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, * SAF akslar
* Teker havuzları
* Genişliği ayarlanabilir hidrolik yükleme rampaları
* Havalı süspansiyon
* Genişletilebilir
* Boş ağırlık: 11.020 kg
-----Dahili araç numarası: 11010----Hatalar ve ara satış hakkı saklıdır.
Iaodpfx Aljwta Alocot
WhatsApp desteği mevcut!
Araçla ilgili sorularınız veya daha fazla bilgi için bize rahatça WhatsApp üzerinden yazabilirsiniz.
WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça
Küçük ilan
Groenlo
2.640 km
Max Trailer MAX410 Hidro-mekanik direksiyonlu MAX410
MAX TrailerMAX410 The MAX410 with hydro-mechanical" steering
Çağrı
Koşul: ikinci el, Üretim yılı: 2021, KDV/fark vergilendirmesi: KDV indirilebilir
Ön lastiklerin durumu: 90
Arka lastiklerin durumu: 90
Iajdpfsu I I Tmox Alcot
Ön lastikler: 445/65 R 22.5
Arka lastikler: 445/65 R 22.5
Daha fazla bilgi için lütfen PFEIFER GROUP ile iletişime geçin.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (2+2) - nachlaufgelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 51.780 kg, toplam ağırlık: 65.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website.
The following is an excerpt from the equipment list. Full equipment details available on request.
GOOSENECK:
* Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long, with rear ramped section approx. 1,000 mm x 10°
* Suitable for tractor units: 4x2, 6x2, and 6x4
* Plug-in steel front wall, approx. 400 mm high
* ASPÖCK UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power pack for controlling hydraulic functions (excluding hydraulic winches)
* Outer gooseneck beams with mounting holes for bolted lashing rings
* One mounting hole at the rear upper part of the outer beam for a bolted lashing ring
* 1 pair of screw-in lashing rings included (LC 10,000 daN)
* On the gooseneck: 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodised finish
Iaedpfxoyhkrlj Alcjt
* On the gooseneck: 1 plug-in aluminum rear board, approx. 400 mm high, anodised finish
* Approx. 40 mm thick hardwood flooring above the gooseneck
* 2" kingpin
* 1 transverse stake pocket rail fitted in the gooseneck deck in front of the ramped section, for plug-in stakes approx. 100 x 50 mm
LOADING AREA:
* Extendable loading area, approx. 8,800 mm long, with rear ramped section approx. 500 mm x 10°
* Recessed well in the deck including the sloped section for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H)
* TPMS tire pressure monitoring system according to ECE R 141
* BPW axles and suspension, 1st and 2nd axles fixed, 3rd and 4th axles steering
* 3rd and 4th axles with electromagnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each, air suspension with lift and lower valve
* Mechanical landing legs with 2-speed gearbox and crank
* Continuous hardwood flooring approx. 50 mm thick on deck and between axles (increases friction coefficient)
* 1 intermediate table with recessed platform, approx. 300 mm wide, for large cross-section sliding tube with sheet metal covering
* 1 pair of lashing rings on front cross-member (LC 10,000 daN)
* 6 pairs of recessed lashing rings in the outer frame, foldable outward (LC 10,000 daN)
* Additionally, 1 pair of external lashing rings on the front cross-member, oriented approx. 90° toward deck (LC 10,000 daN)
* Extendable galvanized side extensions, approx. 230 mm per side (without timber boards)
* 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in deck in front of 1st axle
* Between 2nd and 3rd axles: 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D)
* 1 pair mechanical rear supports
* 245/70 R 17.5 3PMSF dual tires, brand of our choice
HYDRAULIC LOADING RAMPS:
* DR-15/60-900-4350-HB-HV-M
* One pair of two-part steel ramps, approx. 4,350 mm long, 900 mm wide
* Hardwood decking
* Hydraulically folding ramp tips
* Each ramp hydraulically adjustable approx. 235 mm outward and 215 mm inward
* Hardwood decking on rear deck slope
* Ramp with hardwood surface
BRAKING SYSTEM:
* WABCO EBS-E braking system in accordance with EU regulations
SURFACE TREATMENT:
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% al...
Küçük ilan
Gilze
2.728 km
Düşük yükleyici
Max TrailerF-S43-1A1Y / HYDRAULIC RAMP
Çağrı
Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2016, toplam uzunluk: 12.750 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 3.650 mm, süspansiyon: hava, lastik boyutu: 235/75R17.5, dingil mesafesi: 6.460 mm, renk: kırmızı, Üretim yılı: 2016, Donanım: ABS, 1 x self-tracking axle / trailing steering axle.
Hydraulic ramps.
Loading bed: 860 cm
Loading height: 90 cm
Coupling height: 130 cm
= Further information =
Axle configuration
Tire size: 235/75R17.5
Iajdpfx Ajy Igkrslcet
Brakes: Drum brakes
Suspension: Air suspension
Rear axle 1: Twin tires; Tread depth left inner: 40%; Tread depth left outer: 40%; Tread depth right inner: 40%; Tread depth right outer: 40%
Rear axle 2: Twin tires; Tread depth left inner: 35%; Tread depth left outer: 35%; Tread depth right inner: 35%; Tread depth right outer: 35%
Rear axle 3: Twin tires; Tread depth left inner: 50%; Tread depth left outer: 50%; Tread depth right inner: 50%; Tread depth right outer: 50%
Weights
Unladen weight: 9,190 kg
Payload: 38,810 kg
Gross vehicle weight: 48,000 kg
Identification
Type number: F-S43-1A1Y / HYDRAULIC RAMP
= Company information =
ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We strive to provide accurate information; however, no rights can be derived from the texts provided.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader (1+2) - nachlaufgelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.410 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website.
Partial list of features. Full specification available on request.
NECK:
* SNT-design gooseneck for optimized loading platform length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Plug-in steel front bulkhead, approx. 400 mm high
* ASPÖCK-UNIBOX
* 3 kW electro-hydraulic power unit for hydraulic operations (excluding hydraulic winches)
* Approx. 40 mm hardwood decking above gooseneck
* 2-inch kingpin
* Gooseneck guide plate for fifth wheel, approx. 500 mm wide
* Rear of gooseneck equipped for ALU approach ramps
* Round NATO socket on front connection strip (Maeler & Kaege VG 96 917)
* 4 wheel chocks with holders ahead of the front bulkhead
* 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inside the chassis beam)
EQUIPMENT:
* Loading platform approx. 8,800 mm long, extendable version approx. 4,100 mm, rear with taper approx. 500 mm x 10°
* Recess in the loading area and into the taper for excavator dipper stick accommodation, approx. 2,490 x 750 x 210/290 mm (L x W x H)
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the platform length
* TPMS tire pressure monitoring system per ECE R 141
* BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered trailing
* 3rd axle with electro-magnetic reverse lock, can be activated by reverse gear and manually
* Technical axle load: 12,000 kg per axle, air suspension with lift and lowering valve
* 235/75 R 17.5 3PMSF twin tires. Brand of our choice
* Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load approx. 50,000 kg
* Hardwood floor (approx. 50 mm thick) throughout the load area and interrupted between axles (increases coefficient of friction)
* 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube. Intermediate table with recessed platform and extendable mountings for aluminium bridging elements
* Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate
* 1 pair of lashing rings on the front cross member (LC 10,000 daN)
* 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outwards (LC 10,000 daN)
* 1 pair of fixed wheel recesses ahead of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D)
* Wheel recesses with square climbing strips approx. 15 x 15 mm, with widenings at the bottom (if vehicle equipped with extendable outriggers)
* 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load area between the 1st and 2nd axle
* Wheel recesses with square climbing strips approx. 15 x 15 mm and bottom widenings
* Aluminium covers for wheel recesses ahead of the axles and between the 1st and 2nd axle, which can also serve as extension planks (if vehicle equipped with extendable outriggers)
* Lockable aluminium elements fitted onto the extension pipes of the outriggers
* 1 pair of mechanical rear supports
* 1st axle with traction aid
Ijdpfx Aljy Auh Ijcoat
* Painted sand...
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Plus Satteltieflader Hebebett
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available for immediate delivery and short-term availability, on our website. Extract from the equipment specification below.
Complete equipment details available upon request.
GOOSENECK:
* Gooseneck in SNT design to optimize cargo deck length, approximately 3,700 mm long, with a rear bevel approx. 1,000 mm x 6°
* For tractor units: 4 x 2 and 6 x 2
* ASPÖCK-UNIBOX
* Grating surface on the gooseneck and rear bevel with 5 mm sheet metal reinforcement
* 2-inch king pin
* Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide
* Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917)
* On the gooseneck: 1 pair of removable aluminium drop sides, approx. 400 mm high, anodized finish
* 1 LED work light mounted at the top left and right of the front wall, wired to the trailer head connection bar
CARGO DECK:
* Cargo deck length approx. 9,600 mm, rear bevel approx. 900 mm x 6°
* Deck area behind the gooseneck hydraulically raisable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg
* Full-length grating surface with approx. 5 mm steel support plate on the lift bed and cargo deck for additional reinforcement, designed for point loading
TYRES:
235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion
* TPMS tire pressure monitoring system according to ECE R 141
Iaedpfoy Auhhsx Alcst
AXLES:
* BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle steering
* 3rd axle with electro-magnetic reverse lock, can be activated via reverse gear and manually
* 1st axle with traction aid
* Technical axle load: 12,000 kg each
* Air suspension with raise and lower valve
HYDRAULIC LOADING RAMPS:
* 1 pair of two-piece AXS steel ramps with grating surface, approx. 4,920 mm long and 900 mm wide
* Ramp tips hydraulically foldable
* Ramps can be hydraulically shifted approx. 235 mm outward and approx. 365 mm inward individually
* Flashing lights on the outer sides of the ramp tips, with switch next to the ramp controls
* Ramp safety in transport position using quick release
* Painted sand coating on the outer frame of the ramp and on the ramp tip
* Mechanical drop-leg side supports in the ramps to assist when docking at unloading bays
* Controls for the hydraulic ramps located on the right side of the vehicle
BRAKE SYSTEM:
Brake system by WABCO EBS-E, compliant with EU regulations
SURFACE TREATMENT:
* HRM metallization of the complete chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure optimal corrosion protection
PAINTWORK:
* Semi-trailer in carmine red (RAL 3002)
* Rims in silver grey
* Drop sides ALU natural
* Wheel hubs per axle manufacturer specification
* Lamp panel pure white (RAL 9010)
EQUIPMENT:
* Front wall made of steel, removable, approx. 1,600 mm high, incl. interface bar for service lines to tractor unit installed approx. 1,000 mm from lower edge of external frame profile
* Lashing chain attachment points on the interior of the front wall, left and right, with aluminium tray below on left and right for storing chains or tension straps
* Behind the front wall, approx. 12 mm thick DELIGNIT lining, bolted
* 2 additional pairs of bolted lashing rings (LC 5,000 daN)
* Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Wire cable approx. 24 m long, cable diameter approx. 9.5 mm, including cable pressure roller
* Deflection pulley for the cable winch with shackle and bolted lashing point
Küçük ilan
Essen
2.594 km
Çalışma platformlu yarı römork
FAYMONVILLETelemax Megatrailer - hydr. gelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete inventory of vehicles, including immediately and short-term available vehicles, on our website.
Partial list of equipment. Full specifications available on request.
EQUIPMENT:
* Gooseneck, approx. 4,100 mm length, with central beam
* Extendable loading platform, approx. 9,400 mm length, with rear bevel approx. 350 mm x 10° and integrated mounting rail for attaching loose aluminum loading ramps
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length
* Technical fifth-wheel load: 18,000 kg
* Suitable for tractor units: 4 x 2 and 6 x 2
* TPMS tire pressure monitoring system compliant with ECE R 141
* BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables
* Technical axle load: 12,000 kg per axle
* Air suspension with lift/lower valve
* 235/75 R 17.5 3PMSF twin tires, brand of our choice
* ASPÖCK-UNIBOX
* 3 kW electro-hydraulic unit for hydraulic system operation. Supply connections on the tractor unit not installed
* 4 pairs of recessed lashing rings in the gooseneck outer frame: - the three front pairs installed horizontally (LC 10,000 daN) - the rear pair foldable outward (LC 10,000 daN)
* 4 pairs of stake pockets recessed into the gooseneck outer frame for plug-in stakes approx. 100 x 50 mm
* 2-inch kingpin
* Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg
* On gooseneck and loading platform approx. 32 mm wooden floor encased in ALU omega profiles
* 10 pairs of horizontally recessed, foldable lashing rings in the loading platform outer frame
* 1 pair of lashing rings (LC 10,000 daN) in front of the last axle and at the rear cross member
* All other lashing rings (LC 5,000 daN)
* 6 pairs of stake pockets recessed into the loading platform outer frame for plug-in stakes approx. 100 x 50 mm
* 1 spare wheel holder under the platform on the right side in direction of travel
* 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the platform on the left side in direction of travel
* Bevel at the vehicle’s rear cross member, approx. 350 mm x 10°
* Integrated mounting rail for loose ALU loading ramps at the vehicle’s rear cross member
* 1 pair of drop tube supports at the rear cross member
* Remote steering from front and rear via cable remote control, with single-track control of axles (no installation in the tractor unit)
* Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917)
* 1 LED work lamp each left and right on the front wall, wired to the connection panel for the tractor unit
* One locking point on the extension, every approx. 500 mm
Iaodsy Augdopfx Alcot
* Holder for plug-in stakes on inside of gooseneck front wall when not in use
* 4 wheel chocks with holder under the loading platform
* Extendable galvanized platform wideners approx. 230 mm per side (without timber floorboards)
* 1 LED work lamp each left and right in front of axles, wired to the tractor unit connection panel
* 2 axle load gauges mounted on the left side including axle load chart
* 1st axle with starting aid
* Under the gooseneck and at the rear end cross member left and right, each with mounting bracket for warning plates
* Acoustic warning signal when reversing
* EU reflector at the rear of the vehicle
Küçük ilan
Landsberg
2.202 km
Alçak şasi dorse
FAYMONVILLESatteltieflader MAX100-N-3B-9.30-U
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.953 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX100-N-3B-9.30-U
Technical Data
Speed: 80 km/h
Gross vehicle weight: 49,500 kg
Fifth wheel load: 18,000 kg
Axle load: 31,500 kg
Unladen weight (+/- 3%): 10,547 kg
Payload approx.: 38,953 kg
Gooseneck length: 3,850 mm
Fifth wheel height loaded: 1,200 mm
Loading platform length: 9,300 mm
Extendable by: 0 mm
Axle spacing: 1,360 mm
Steering angle radius (rear): 2,300 mm
Loading height at max. load: 860 mm
Overall width: 2,540 mm
Suspension travel: -55/+145 mm
Technical Description
Gooseneck:
Gooseneck with chamfered front corners at 45° and rear taper of approx. 750 mm x 10°.
3 pairs of lashing rings (LC 5,000 daN).
Hardwood flooring, 30 mm thick.
Loading platform:
Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear slope of approx. 1,000 mm x 8°.
6 pairs of folding lashing rings facing outward (LC 5,000 daN).
2 pairs of folding lashing rings facing outward (LC 10,000 daN).
1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN).
Cut-outs in the outer frame of the loading platform for attaching tensioning straps. (LC 2,000 daN).
Hardwood flooring approx. 48 mm thick, above the axles fitted with chequer-plate covering.
Ramps:
Two-piece steel ramps: One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering.
Ramps with hydraulically foldable ramp sections, hydraulic lifting device and can be hydraulically adjusted laterally.
Maximum load per pair: 40,000 kg
Landing Legs:
JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load).
Tyres:
235/75 R 17.5 tyres as per manufacturer's selection.
Iaodpfxjg Sk Trs Alcjt
Axles:
SAF axles, air-suspended, with drum brakes, featuring lift/lower function.
Last axle is force-steered with electro-magnetic reverse lock, activatable via reverse gear or manually.
Axle tools.
Brake System:
Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit.
Steel Construction:
Steel construction made from high-strength fine-grained steel.
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Painting:
Premium and durable corrosion protection via sandblasted welded frame, primed with 2-component (2K) zinc dust primer. High-quality single-tone 2-component (2K) top coat in RAL colours of your choice. Rear metalized and painted in RAL 9010 (pure white). Metallic paint not possible.
Electrical System:
Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets. ISO-compliant connections.
24N ISO-1185
24S ISO-3731
15-pin ISO-12098
Accessories Included
2" king pin
One galvanized steel front bulkhead approx. 400 mm high.
At the galvanized front connection strip yellow/red airline couplings.
4 wheel chocks with holder on the front bulkhead (± 5kg).
Cable for supplying electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long, max. 250A) between semi-trailer and tractor unit, with plug connection (ANDERSON-ANDERSON).
Galvanized folding supports under the rear slope of the loading platform.
Bracket for a rotary beacon at the rear of the trailer.
Control valves for the ramps installed on right-hand side of trailer (± 4kg).
Yellow reflective tape according to EU regulations on the sides and rear of the trailer.
Electro-hydraulic unit mounted at the rear under the loading
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Satteltieflader - hydr. gelenkt
Çağrı
Koşul: yeni, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Additional vehicles available – extract from equipment list.
Full equipment details upon request.
GOOSENECK:
* Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Steel front wall, detachable, approx. 400 mm high
* ASPÖCK-UNIBOX on the front control panel with 24N, 24S & 15-pin sockets
* 3 kW electric-hydraulic power pack for controlling hydraulic functions, excluding hydraulic winches
* Outer beams of the gooseneck with mounting holes for bolted lashing rings: first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 pair of horizontal lashing rings in the rear of the gooseneck (LC 10,000 daN)
* On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish
* On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized finish
* Approx. 40 mm thick hardwood flooring over the gooseneck, over king pin checker plate covering
* 3.5 inch king pin
* Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide
* Round NATO plug socket on the front control panel (Maeler & Kaege VG 96 917)
* 2 pairs of lashing rings with retaining spring suspended on the outer beams of the gooseneck (LC 5,000 daN)
LOADING PLATFORM:
* Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10°
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the platform length
* BPW axles and suspension, 1st axle with steering, all other axles hydro-mechanically forced steering
* 1st axle with electro-magnetic reverse lock via reverse gear and manual activation
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* 235/75 R 17.5 3PMSF twin tyres – brand at our discretion
* Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg
* On the platform, continuous and between axles interrupted approx. 50 mm thick hardwood flooring (thereby increasing the coefficient of friction). – Slotted holes for hook-in and repositionable bridging elements
* At front of platform – 1 adjustable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. – Front and rear with slotted holes for hook-in and repositionable bridging elements
* 1 pair of lashing rings on the front cross member (LC 10,000 daN)
Iodpfx Aloxarmasceat
* 7 pairs of recessed, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN)
* Extensions (galvanized) extendable by approx. 230 mm on each side (without wooden planks)
* 1 pair of mechanical rear supports
* Remote steering from front and rear via cable remote control, with axle tracking control, no installation in tractor unit
* TPMS tire pressure monitoring sensors installed in all wheels
* Platform locking with conically welded locking profiles every 500 mm
* Locking control left and right on the trailer
* For the intermediate table, approx. 300 mm wide, a mechanical lock to secure the table to the extension
* 5 pairs of threaded blocks on the extendable beam for mounting bolt-on rings M20 (LC 5,000 daN)
BRAKE SYSTEM
Güven mührü
Machineseeker tarafından sertifikalandırılmış bayiler

Küçük ilan
Oberhausen
2.599 km
Tanker yarı römork
Aurepa gas tank semi trailerfor oxygen, nitrogen, argon cryogenic
Çağrı
Koşul: mükemmel (kullanılmış), Üretim yılı: 1990, Sıvı azot, sıvı oksijen, sıvı argon, gaz, kriyojenik için Aurepa treylerleri
Teknik bilgi:
Çalışma basıncı: 3 bar
Pompa: evet
Iaodeittfnspfx Alcjt
Akış ölçer: evet
Sizin için bir fiyat teklifi hazırlamaktan veya size daha fazla bilgi vermekten memnuniyet duyarız. Olasılıkları görüşmek için lütfen bizimle e-posta yoluyla iletişime geçin.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMultimax Plus Satteltieflader Hebebett
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website.
Excerpt from the equipment. Full equipment list available upon request.
Gooseneck in SNT design to optimize loading deck length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6°
* For tractor units: 4 x 2 and 6 x 2
Isdpfx Alsyhkqusceat
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power unit for controlling hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit
* Outer beams of the gooseneck with mounting holes for boltable lashing rings. The first hole approx. 200 mm from the front, then every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* One mounting hole in the upper rear area of the gooseneck's outer beams for a bolt-on lashing ring
* 1 pair of screw-in lashing rings included (LC 10,000 daN)
* 3 pairs of recessed lashing rings inside on the gooseneck's outer beam (LC 5,000 daN)
* 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN)
* 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN)
* On the gooseneck and rear chamfer, grating surface with 5 mm steel reinforcement
* 2-inch king pin
* Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917)
* Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m in length) between trailer and tractor unit with NATO-NATO plugs
* On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish
LOADING AREA:
* Loading area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6°
* Loading area behind gooseneck hydraulically height-adjustable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg
* TPMS tire pressure monitoring system in accordance with ECE R 141
* BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle steered. 3rd axle with electromagnetically controlled reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* 235/75 R 17.5 3PMSF twin tires. Make at our discretion, load index 143/141J (144/144F)
* Mechanical landing legs with 2-speed gearbox and crank
* Continuous grating surface with approx. 5 mm steel reinforcement underlay, designed for point loads: – on the lift bed – on the loading area
* Painted sand coating on the deck plates of the gooseneck and in the transition areas between neck and lifting bed, between lifting bed and loading area, and between loading area and ramps
* 1 spare wheel mounting bracket under loading area on right side in front of axles
* Cut-outs in the outer frame of the loading area and lifting bed for securing straps (LC 2,000 daN)
* 11 pairs of recessed lashing rings flush in the outer frame of the loading area, foldable outwards (LC 10,000 daN): – 3 pairs in the outer frame of the lifting bed – 8 pairs in the outer frame of the loading area
* 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): – 3 pairs in the lifting bed – 8 pairs in the rear part of the loading area
* Control valves for hydraulic ramps located on the right side of the vehicle
* 1 pair of foldable mechanical rear supports with single-handed operation
HYDRAULIC LOADING RAMPS:
* 1 pair of two-part AXS steel ramps with a length of approx. 4,920 mm and a
Küçük ilan
Oberhausen
2.599 km
Tanker yarı römork
Сryolor gas tank semi trailerfor oxygen, nitrogen, argon, CO₂,carbon
Çağrı
Koşul: mükemmel (kullanılmış), Üretim yılı: 1986, Sıvı nitrojen, sıvı oksijen, sıvı argon, gaz, CO₂ için Cryolor römorkları
Iaedpfjwmmakox Alcjt
Üretici: Cryolor, Fransa
Yapım yılı: 1986
Tür: EFM 17000
Toplam kapasite: 17.410 litre
Boş ağırlık: 10.050 kg
Toplam ağırlık: 22.000 kg
Çalışma basıncı: 20 bar
Test basıncı: 27.32 bar
Tank kodu: R 27.3BN
Yalıtım: Vakum yalıtımlı
Römork, azot, oksijen, argon veya CO₂ gibi derin dondurulmuş sıvı gazların taşınması ve depolanması için uygundur.
Size bir teklif hazırlamaktan veya daha detaylı bilgi vermekten mutluluk duyarız. Olasılıkları görüşmek, daha fazla bilgi almak veya bir ziyaret ayarlamak için bizimle iletişime geçin.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLE6-Achs Multimax Satteltieflader - hydr. gelenkt
Çağrı
Koşul: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website.
Extract from the specification. Full equipment details available on request.
GOOSENECK
* Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10°
* For tractor units: 6 x 2, 6 x 4, and 8 x 4 short
* Detachable steel front bulkhead, approx. 400 mm high
* 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches
* Outer beams of the gooseneck with mounting holes for bolt-on lashing rings
* 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN)
* 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish
* 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish
* Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin
* 3.5-inch kingpin
* Gooseneck guide plate for the fifth wheel, approx. 500 mm wide
* Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917)
* In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings)
* 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm
LOADING PLATFORM
* Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10°
* Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length
* BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering
* 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually
* Technical axle load: 12,000 kg each
* Air suspension with raise and lower valve
* Tyres: 235/75 R 17.5 3PMSF twin tires
* Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg
* Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient)
* Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform
* 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements
* 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN)
* 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN)
* 1 pair of mechanical rear supports
* Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor
* 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535
* Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs
* Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...
Iaedsrgzv Njpfx Alcet
Sizin için aramayı kolaylaştırıyoruz: "faymonville max trailer max110 semi-tieflader"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.

Şimdi bilgi alın
+44 20 806 810 84
+44 20 806 810 84
Şimdi ilan ver
*ilan başına/ay































































































































































































































































