Kullanılmış Fliegl Dhks 390 - 25 M³ Asphaltprofi Thermo satın al (79.484)

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902031174, boş ağırlık: 5.835 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2023, bir sonraki muayene (TÜV): 06/2026, yükleme alanı hacmi: 50 m³, toplam uzunluk: 10.300 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.740 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: gri, Üretim yılı: 2023, The images are archive photos. The vehicle may still be in use. Chassis – Tipper Semi-Trailer Fine-grain steel welded construction, in basic lightweight design, fifth wheel plate with replaceable 2" kingpin. Curved front wall "Patented" 24 t, two-speed landing gear, single-side operation, straight lower section, without load compensation. 2x wheel chocks with holders Aluminum side underrun protection Folding rear underrun protection 6x half-shell mudguards Integrated "mudguard holder" with stone-repellent surface Ledpfsy Efcusx Ac Isrl Tarp support bar with holder 2x tow hooks at rear Axles & Suspension BPW disc brake axles "Axle/chassis laser-aligned" for reduced tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and start assist, operated by triple brake application Brake System 2-line air pressure brake system Color-coded lines for easy servicing Spring-loaded parking brake 2 foolproof couplings at front, without connecting line EBS, Electronic Brake System with EBS socket at front, without connection cable Note: The trailer may only be towed by vehicles that can guarantee the effectiveness of ABS! With lifting & lowering valve Vehicle Stability Control System Wheels and Tyres 6x 385/65 R22.5" 6x steel rims Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white marker lights at front 2 white/red clearance lights at rear 2 x 7-pin and 1 x 15-pin foolproof sockets at front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm. (without hose connection) Body Aluminum box-type body made of high-quality, wear-resistant material. Sloped front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail. Inside fitted with access at the front wall. Shovel and broom holder on the outside of the front wall. Rear wall with pendulum mount, "double joint hinge," split 1/2 to 1/2 with two-wing door, top with swing-out support, each door with grain chute. Rear wall with rubber seal Continuous 6 mm floor Standing platform with access, connection plate for air/electricity and brake. Roll tarp stowable on the right-hand side, with central locking on the left-hand side. Operating Notes For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to avoid corrosion damage. The specified gross weight is technically possible. Depending on the load type, the permissible axle/support/kingpin loads may restrict the achievable total weight. (Incorrect load distribution can cause poor handling and tracking.) Note: Not suitable for chemically aggressive materials (e.g., acids, chlorinated compounds, sulphur compounds, "refuse-derived fuels"). Such media, particularly on moist body surfaces, may lead to stress corrosion cracking and severe fractures in the body structure! Vehicles with tipper bodies are intended for non-aggressive loads. Use for transport of aggressive substances such as acids, bases, salts, fertilizers, sewage sludge, and domestic waste is at the owner's risk. This may result in stress crack or pitting corrosion damage. The images are archive photos!

Koşul: ikinci el, Fonksiyonellik: sınırlı işlevsellik, makine/araç numarası: WFDFLT33902030053, boş ağırlık: 7.965 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2023, bir sonraki muayene (TÜV): 08/2026, yükleme alanı hacmi: 50 m³, toplam uzunluk: 11.200 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.540 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: gri, Üretim yılı: 2023, The images shown are archive photos. The vehicle may still be in use. Chassis – Tipper Semi-Trailer Fine-grain steel welded construction in basic lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front wall (patented) 24 t 2-speed landing gear, single-sided operation, with straight lower part, without load compensation Foldable underrun protection Axles & Suspension 3x BPW disc brake axles, 430 mm disc diameter Axles/chassis laser-measured – reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and traction aid, operated via “3x braking” (traction aid operational up to 30% axle load exceedance and up to a max speed of 25 km/h) Lrjdpfx Aoy Edtfjc Iol Hot-dip galvanized lift axle mechanism Brake System 2-line compressed air brake system Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles ensuring effective ABS function! With raise & lower valve Vehicle stability system Wheels and Tyres 6x 385/65 R22.5" 6x steel rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 x 7-pin non-interchangeable sockets at the front, without connecting cable. Electricity not fully functional. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling (fixed part), NW 48 mm. (without hose connection) Body Aluminium box-type body made of high-quality, abrasion-resistant material. Sloped front wall 5 mm thick, with external cylinder bracket. Side walls made of 30 mm hollow profiles, cleanly welded, with bulk-resistant top rail. Interior with access step at the front wall (not in combination with Cramaro cover). Shovel and broom holder on the outside of the front wall. Greenline – conical and aerodynamic body shape “Membrane” rear wall Rear wall suspended, double-joint hinge, divided 1/2 to 1/2 as double-leaf doors, top with swing boom, one grain chute per door. 6 mm continuous floor Standing platform with access. Connection plate for air/electricity and brakes with large clearance for optimal usability. Roll tarp stored on one side to FR-right, with central locking on FR-left Operating Notes For transporting salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod to prevent material-induced corrosion and rusting. The specified total weight is technically feasible. Depending on the load material, the gross weight may not be achievable under observance of permitted axle, support, and fifth wheel loads. Note! Not suitable for chemically aggressive media (e.g. acids, chlorine compounds, sulfur compounds, “refuse derived fuels”); such media can, especially with moisture, cause stress corrosion and severe cracking of the body! Vehicles with loading bodies are intended for non-chemically aggressive cargos. Use for transporting aggressive substances (acids, alkalis, salts, fertilizers, sewage sludge, municipal waste) is at your own risk. This may result in stress cracking or pitting damage. The images shown are archive photos. The vehicle may still be in use.

Koşul: yeni, makine/araç numarası: eca976917d325d4adc41b69e8, boş ağırlık: 7.200 kg, azami yük ağırlığı: 27.800 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r 22,5, Further information Chassis semi-trailer for freight forwarding High-strength fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, main frame reinforcement for 25 t at the center of gravity over 3 m loading length when retracted. 13 pairs of hooks for lashing strap attachment welded to the crossmembers 23 pairs of lashing rings recessed into the outer frame, each rated for 3.5 t Outer frame with load-lock profile for lashing strap attachment Note! Not usable with side walls! 24 t 2-speed landing gear in reinforced version for unhitching while loaded, single-sided operation, with semi-circular lower section and straight mounting plate, with thrust compensation Wheel chocks with holders Aluminum side underrun protection Rear underrun protection Half-shell mudguards With anti-spray mud flaps in accordance with EU regulations 1 spare wheel carrier for 1 spare wheel, with wheel fastening kit 1 stake storage box, closed at the sides, open at the top, below the loading area, doors on both sides, W=450 mm/H=400/420 mm/D=2460 mm 6 pairs of extendable stake pockets for square tube stanchions 80x80 mm, extendable from loading width 2000 mm to 3100 mm 4 pairs of stake pockets recessed in the outer frame for square tube stanchions 80x80 mm 11 stake pockets centrally recessed in the floor for square tube stanchions 80x80 mm, with reinforcement beams, installed between the outer stake pockets 5 x 3 pairs of stake pockets on the outer longitudinal beams for square tube stanchions 80x80 mm, including reinforcement beams – for load securing to the front and rear during transport of reinforcing steel mesh, 2x5000 mm or 2x6000 mm 6 lightweight plug-in stanchions W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized, top with cable guides for strap tensioning 12 lightweight plug-in stanchions W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized with lashing rings welded to both sides at the bottom Note: Stake pockets/plug-in stanchions are not designed for sole securement of long materials, pipes, etc. without additional lashing 2 plastic tool boxes, with drawer and shelf, W=650/H=520/D=670 mm, lockable with a padlock (lock not included) 6 reinforcing steel winches with wire cable and counter hook, with cable feed-through in the outer frame, 1 removable plug-in gearbox for reinforcing steel winches supplied loose (without frame mounting) Telescoping Main frame telescopic, extendable by max. 4000 mm and lockable at approx. every 500 mm Locking with pneumatic bolt locking + frame locking indicator on both sides, operation via manual button, control for brake/locking and suspension on driver’s side, ahead of the axles Storage compartment between longitudinal beams when extended Axles & Suspension SAF disc brake axles with 430 mm disc diameter Rear axle is self-steering, with automatic reverse lock via reversing light, with additional lock function on the trailer via hand button, and manual override in the tractor unit (pin 10), no truck installation required. Lodpfsi Ri Szjx Ac Isrl Offset axle spacing mm Air suspension 1st axle with automatic lift, also electrically controllable from the truck, with starting aid, no truck installation required (starting aid functional up to 30% axle overload and max. speed of 25 km/h) Brake System 2-line compressed air brake system Color-coded line routing for easy servicing Spring-actuated parking brake 2 error-proof coupling heads at the front, without connectio

Koşul: yeni, makine/araç numarası: 71cc13750cef13b72f7a55abe, boş ağırlık: 5.500 kg, azami yük ağırlığı: 29.500 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22,5², Further Information Chassis Semi-Tipper Fine-grain steel welded construction with lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front wall, patented 24t two-speed landing gear, single-sided operation, with straight lower section, without push-rod compensation 2 wheel chocks with bracket Underride protection, foldable Half-shell mudguards Integrated mudguard holder with stone-repellent surface Anti-spray mud flaps on rearmost axle only 1 tarp pole with bracket 2 towing hooks at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Axles in off-road version Air suspension 1st axle automatic lift axle, including forced lowering and start assist, operated by pressing brake three times (start assist functions up to 30% axle overload and up to max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against corrosion Brake System 2-line compressed air brake system, color-coded pipelines for easy service Spring-loaded parking brake 2 anti-mix coupling heads at front, without connection line EBS, Electronic Brake System with EBS socket at front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With raise and lower valve Vehicle stability control system Wheels and Tyres 385/65 R22.5, make per manufacturer’s choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED marker lights 2 white position lights at front 2 white/red contour marking lights at rear 2 x 7-pin anti-mix sockets at front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chromed, with HD coupling nut, fixed part, NW 48 mm (without hose connection) Operated hydraulically via vehicle PTO Body Aluminium box body made from high-quality, wear-resistant material; front wall 5 mm thick, external side walls from 30 mm hollow section profiles, expertly welded, with spill-repellent top rail profile. Internal ladder on front wall (not with Cramaro option). Shovel and broom holder outside on front wall. Greenline – conical and aerodynamic body shape Membrane – tailgate Tailgate pendulum-mounted with double hinge and split 1/2 to 1/2 with top swing arm, with one grain slide per door. Tailgate with rubber seal. Note: Heat-resistant up to max. 170°C! Ljdji Ri Efspfx Ac Ijrl Floor throughout 6 mm thick Standing platform with access steps, connector plate for air/electrics and brake with ample space for ease of use Roll tarp to be stowed on right side (FR-right) with central locking on left side (FR-left) Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material damage and corrosion. The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable within the allowable axle/kingpin/load limits. (Poor driving and trailing behavior may result from incorrect load distribution) Country of Registration / Signs Germany Approval according to EC 2007/46 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity markings with reflective tape according to ECE R 048, white side and red rear Paintwork Frame DB 7350 Novagr

Koşul: yeni, makine/araç numarası: 6e7907b4000c16661fa1c8a1f, boş ağırlık: 4.150 kg, azami yük ağırlığı: 30.850 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further information Chassis Semi-Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front section, patented without landing gear Wheel chocks with holder Foldable underride guard Half-shell mudguards Integrated mudguard holder, stone-repellent surface Towing hook at rear Axles & suspension SAF disc brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and traction aid, operated by activating brakes 3x (traction aid functional up to an axle overload of 30% and up to a max speed of 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against corrosion Brake system 2-line compressed air brake system, color-coded piping for easy service. Spring-loaded parking brake 2 anti-swap couplings at the front, without connecting line EBS, electronic braking system with EBS socket at front, without connection cable Note: The trailer may only be towed by tractor units that guarantee effective ABS functionality! With raise & lower valve Vehicle stability control system Wheels and tires 385/65 R22.5, manufacturer at the discretion of the builder Polished aluminum rims, manufacturer at the builder’s discretion Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK threaded coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Body Aluminum box body made of high-quality, wear-resistant alloy, front wall 5 mm thick, outer walls made of 30 mm hollow chamber profiles, neatly welded, outer upper edge with bulk material-repelling profile. Interior with access ladder at the front wall (not in combination with Cramaro). Shovel and broom holder on the outside of front wall. Greenline – conical and aerodynamic body shape Membrane – tailgate Tailgate as pendulum flap with double-joint hinge, mounted outside with 2-hook locking system. Tailgate with rubber seal. Note! Heat resistant up to max. 170°C! Lsdpfx Aei Ri Aroc Isrl Continuous 5 mm thick floor, Brinell 110. Note! Only for transporting sand, chippings, and round gravel with a max. grain size up to 20 mm! Warranty does not apply to any other goods! Standing platform with access, connecting plate for air/electrical and brakes with ample space for optimal operation. Roll-up tarpaulin, stashable to FR-right, with central locking on FR-left Operating instructions For transports of salt, lime, etc., we recommend a tipper cylinder with a hard-chromed piston rod to prevent material-induced corrosion. The specified gross vehicle weight is technically possible; depending on load, permissible axle, support, and fifth wheel loads may restrict achievable total weight. (Poor driving and trailing performance possible due to incorrect load distribution) Revolution Link: Revolution Link User Review: Registration Country / Plates Germany With Dekra inspection and report (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape in accordance with ECE R 048, white on the sides, red on the rear Paintwork Frame DB 7350 Nova Grey Body R

Koşul: yeni, makine/araç numarası: 8e6cf81e11b107f23f22f209a, dingil konfigürasyonu: 3 dingil, lastik boyutu: 435/50 r19.5, Further Information Fine-grained steel welded construction, with preload light pretensioning in the neck area, fifth wheel plate with interchangeable 2" kingpin, outer frame slightly bevelled, new version with load-lock profile for lashing strap attachment, 24 t two-speed landing gear, one-sided operation, with straight lower section, without thrust compensation. Note: Free support leg clearance or free pivot radius to the rear approx. 1930 mm, sliding ladder at the rear, lateral door retainers, 2 chocks with holders, aluminium side underrun protection, galvanised steel rear underrun protection, quarter-shell mudguards in front of the first axle and behind each axle, with anti-spray mud flaps according to EC standards, rear impact protection. Lrsdpfx Acei Ri E He Ijl SAF disc brake axles, axles/chassis laser-aligned to reduce tyre wear and fuel consumption, air suspension. 2-line compressed air braking system, colour-coded line installation for easy service, spring-type parking brake, 2 polarity-safe coupling heads at the front, without connecting line, EBS electronic braking system with EBS socket at the front, without connection cable. Note: The trailer may only be towed by tractor units which ensure the effectiveness of ABS! With lifting & lowering valve, vehicle driving stability system. 435/50 R19.5 tyres, make at manufacturer's discretion, steel rims finished in factory silver. 24 Volt, multi-chamber lights, side yellow LED lighting, 2 white position lights at front, 2 white/red lane-keep lights at rear, two 7-pin polarity-safe sockets at front, without cables. Floor: approx. 30 mm coated plywood, laid on longitudinal cross members for high point load capacity, suitable for fork lift axle load up to max. 7100 kg Front wall / corner stanchions at front: 2, 580 mm high, steel corner stanchions in volume design, release device for curtain at front wall, crash blocker, with lower internal steel impact protection at approx. 140 mm height. Centre stanchions: 3 pairs of sliding stanchions along the full length, with quadruple stake pockets and long bottom pocket, 3 pairs of stanchion positions Slats: 5 rows of wooden drop-in slats. Rear wall / corner stanchions at rear: Rear corner stanchions steel up to lower edge of roof, attachment for curtain with round tube and tensioning ratchet, two-wing rear portal doors with two internal lock rods each. Curtain: Curtain with welded-in horizontal and vertical straps, tensioning fasteners made of stainless steel Roof: Sliding roof, rear end-lift foldable, roof sliding from back to front, L-roof rail for automotive industry, internal width between roof rails approx. 2490 mm, curtain colour: white, 400 Roof non-elastic, minimal sagging of roof rail during loading/unloading, optimal rain gutter at the rear (on top of end stanchion, above doors), EcoLift - lift roof can be raised by approx. 380 mm, with gas strut assistance, 3 driving positions at the front: internal height front approx. 2900mm / 2950 mm / 3000 mm, set to approx. 3000 mm Germany, Type approval according to EC 2007/46, 24/7-service hotline, Fliegl manufacturer certificate for body stability according to EN 12642 XL, prepared for single-line number plate holder, warning sign according to ECE-70, reflective stripes: white, continuous on lower side curtain and in corners at the top (when visible side walls, stripe at the bottom on side wall), reflective stripes: red, surrounding the rear portal. Frame DB 7350 novagrau, 10 years corrosion warranty, landing l

Koşul: yeni, makine/araç numarası: 068983c41e44eb5660fa9100c, boş ağırlık: 6 kg, azami yük ağırlığı: 28 kg, toplam ağırlık: 35 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 435/50 r19,5, Further Information Chassis Semi Logistics Fine-grained steel welded construction with preload slight pre-tension in the neck area, fifth wheel plate with replaceable 2" kingpin X-tra Long, with 15,030 mm internal length Slightly sloped new outer frame version with load-lock profile for attaching lashing straps 24 t 2-speed landing gear, single-side operation, with straight lower part, without compensating foot Note: Free support leg corner dimension or clear rear swing radius approx. 1,930 mm Pull-out ladder at the rear Side door holders 2 wheel chocks with bracket Side underrun protection aluminium Rear underrun protection galvanized steel Quarter mudguards in front of first axle and behind each axle Rear impact protection Axles + Suspension SAF disc brake axles Axle/chassis laser measured to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system Color-coded line arrangement for easy service. Spring-loaded parking brake 2 foolproof coupling heads at front, without connection line EBS, Electronic Braking System with EBS socket at front, without connecting cable Attention: The trailer may only be towed by tractor vehicles that ensure the effectiveness of the ABS! with lift & lowering valve Vehicle - Driving Stability System AAC Basic, automatic axle lift on the last axle as a maneuvering aid, active up to 20 km/h, can be deactivated manually Axle load detection via EBS canbus signal, for display on the in-cab monitor, truck must be correspondingly equipped, no installation (not a calibrated scale) Wheels and Tires 435/50 R19.5, brand as selected by manufacturer Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED side marker lights Yellow LED side marker lights with flashing function, connected with indicator 2 white position lights at the front 2 white/red lane control lights at the rear 2 x 7-pin foolproof sockets at front, without connection cable Ljdpei Riwusfx Ac Ijrl Floor Antislip phenolic plywood floor approx. 30 mm thick, on long longitudinal beams for high point load capacity for fork-lift axle load up to max. 7,100 kg Front wall / front corner stanchions 2,580 mm high, steel corner stanchions, volume construction, release mechanism for side curtain at front wall, crash blocker, inner lower section with steel bumper at approx. 140 mm height Middle stanchions 3 pairs of sliding stanchions, fully adjustable lengthwise, with four insertion pockets and long pocket below. 3 pairs of stanchion positions Insert slats 5 rows of wooden insert slats Rear wall / rear corner stanchions Rear steel corner stanchions up to lower edge of roof, hooks for curtain with round tube and tension ratchet Double-wing rear portal doors with 2 internal locking rods each Tarpaulin Tarpaulin with welded horizontal and vertical straps Tension locks made of stainless steel Roof Sliding roof, rear end-lift foldable, roof slides from rear to front, L-roof beam for automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin color: white Non-elastic roof, minimal roof beam sag during loading and unloading EcoLift - lifting roof can be raised approx. 380 mm on both sides, with gas pressure strut support, 3 ride heights at front: Internal height at front approx. 2,900 mm / 2,950 mm / 3,000 mm, adjusted to approx. 3,000 mm Optimized rain gutter at rear, at upper end cross member, above doors Operating Notes Special permit required if overall train length exceeds 16,500 mm. When arrangi

Koşul: yeni, makine/araç numarası: d9c951d746f03c05bc5470f89, boş ağırlık: 5 kg, azami yük ağırlığı: 29.045 kg, toplam ağırlık: 35 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis Semi-Trailer Forwarding Fine-grain steel welded construction, fifth-wheel plate with interchangeable 2-inch kingpin Vario stanchion system 4 pairs recessed into the loading area, collapsible to 2,100 mm and extendable to approx. 3,500 mm for loading. Stanchions can be locked at 100 mm intervals for an internal width of 2,100 mm to 3,000 mm, 4 pairs of divisible stanchions 600 mm + 1,200 mm, total height 1,800 mm, removable. For an internal stanchion width above approx. 2,350 mm, oversize width. Vario bulkheads Floor prepared for the installation of 3 bulkheads. 4 x 5 pairs of Vario stanchion pockets for plug-in bulkheads (front and rear respectively), and 1 x 3 pairs each in the center for transporting welded mesh of 2 x 5,000 mm or 2 x 6,000 mm 2 Vario bulkheads, each consisting of 1 pair of plug-in stanchions and 1 crossbeam at the top approx. 2,200 mm wide. Crossbeam extendable by 220 mm on each side, with lashing hole for securing. Height of Vario bulkhead approx. 1,900 mm, adjustable to 1,300 mm or 700 mm. 4 stanchion pockets recessed in the center of the floor for 80 x 80 mm plug-in stanchions 1 pair of supports at the bottom for front Vario bulkhead 1 pair of supports at the bottom for rear Vario bulkhead Outer frame with slight incline, with Load-Lock profile for lashing strap hooks 14 additional pairs of lashing eyes recessed in the outer frame, 5 tons each 24 t, 2-speed landing gear, single-side operation, with straight lower section, without compensating device Pull-out ladder at rear Wheel chocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Quarter fenders in front of and behind the axle assembly With anti-spray mud flaps only on the last axle Rear impact guard 8 construction steel winches with wire rope and counter hooks, 4 left and 4 right, with wire rope routing through the outer frame, 1 removable plug-on transmission for construction steel winches – supplied loose (without frame mount) 1 spare wheel holder for 1 E-wheel, with wheel fastener set 1 plastic toolbox, with drawer and shelf, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 stanchion storage box closed, open at the top, below the loading area, doors on both sides, w=450 mm / h=400/420 mm / d=2460 mm 4 lashing/stanchion rails set transversely in the floor across the full width to the outer frame (max. usable internal width between the outer plug-in stanchions approx. 2,170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, spaced approx. 60 mm apart (of the round steel). Bottom finishes with angle steel, half open downwards. For lashing and plugging in 80 x 80 mm stanchions. Note: Stanchion pockets/plug-in stanchions are not designed solely for securing long loads, pipes, etc. without lashing Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, activated by braking 3x (starting aid works up to 30% axle overload and up to a max speed of 25 km/h) Axle lift below the recommended driving height, therefore no warranty for tire damages Ljdpfx Acei Ri R Ds Iorl Brake system 2-line compressed air brake system, color-coded line routing for easy service Spring-actuated parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at front, no c

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902028370, boş ağırlık: 6.015 kg, azami yük ağırlığı: 28.985 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 04/2021, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 3.000 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.030 mm, süspansiyon: hava, lastik boyutu: 435/50 R19,5", renk: siyah, Üretim yılı: 2021, Donanım: EBS (Elektronik Fren Sistemi), Chassis semi-trailer for haulage Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outward frame slightly inclined with “Load-Lock profile” for lashing strap attachment, if fitted to the frame. Note: To hook the straps in combination with side walls, the side walls must be opened! 24 t, 2-speed landing gear, one-sided operation, with straight lower section, without compensation for telescopic movement Note: Free landing gear foot corner dimension or free swing-through radius at the rear approx. 1930 mm, without supports. Extendable ladder at the rear, door retainer to the side 2x wheel chocks with holders Side underrun protection in aluminium Rear underrun guard, galvanized steel Ledox Sqmrspfx Ac Ijrl Quarter-shell mudguards in front of the 1st axle and behind each axle With anti-spray mudflaps behind each axle Rear buffer, pallet stop on both sides approx. 15–20 mm high, bolted design, reduces loading height by approx. 15–20 mm Plastic toolbox with drawer and shelf, dimensions w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included) Axles & Suspension SAF disc brake axles “Axle/chassis laser alignment”: Reduced tire wear and fuel consumption, air suspension, without lift axle Brake System 2-line compressed air brake system, colour-coded piping for easy servicing. Spring-loaded parking brake 2 fail-safe coupling heads at the front, without coupling line EBS, electronic braking system with EBS socket at the front, no connection cable Note: The trailer may only be towed by tractors that ensure the effectiveness of ABS! With lift & lower valve Vehicle stability control system Wheels and Tires 435/50 R19.5”, tyre brand at manufacturer’s discretion, alternatively 385/55 R19.5 Steel rims, factory silver finish Electrics 24 Volt, multi-chamber lights, amber LED side marker lights 2 white position lights at the front 2 white/red demarcation lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cables Floor Resin-coated plywood panels approx. 30 mm thick, laid on longitudinal crossmembers for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Body Body mounted Front wall / front corner posts 2,580 mm high, corner posts made of steel in volume design, release mechanism for side curtain at front wall, “Crash blocker”, lower internal, with steel buffer at approx. 140 mm height Centre posts 3 pairs of sliding posts, adjustable along full length, with 4 pocket receptacles each and extended pocket at the bottom 3 pairs of post positions Insert slats 5 rows of wooden insert slats Rear wall / rear corner posts Rear corner posts in steel, up to the lower edge of the roof, curtain rail with round tube and tensioning ratchet Rear portal doors, double-wing, each with two internal locking rods Curtain Curtain with welded horizontal and vertical straps Tensioners made of stainless steel Roof Sliding roof, rear end-lift hinged upwards, sliding from rear to front, L-roof rail for automotive industry, internal width between roof rails approx. 2,490 mm, curtain colour: white Non-elastic roof, minimal bending of roof rail during loading/unloading EcoLift – roof raisable by approx. 380 mm, both sides, with gas strut assistance, 3 driving positions at the front: internal front height approx. 2,900 mm / 2,950 mm / 3,000 mm, factory set to approx. 3,000 mm Optimized rear rain gutter, at top of rear crossmember, above doors

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33901014232, boş ağırlık: 5.900 kg, azami yük ağırlığı: 29.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, bir sonraki muayene (TÜV): 07/2026, yükleme alanı uzunluğu: 13.800 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 2.638 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5, renk: diğer, Üretim yılı: 2025, Chassis Semi Low-loader for Haulage Fine-grain steel welded construction, fifth wheel plate with interchangeable 2" kingpin Drive-over and loadable with construction/agricultural machinery up to max. 24,000 kg gross weight and up to a maximum machine width of 2,480 mm (the track width of the machine/vehicle to be transported must not exceed 2,200 mm), with latching bar for aluminium ramps at the rear (wider construction/agricultural machines may not be loaded) Outer frame, slightly sloped new design with "Load-Lock profile" for lashing strap attachment Lsdpfx Aexb D Swoc Ijrl 14 pairs of recessed lashing rings in the outer frame, each rated at 2.5 t 6 pairs of recessed lashing rings in the outer frame, each rated at 5 t 24 t, 2-speed landing gear, single-side operation, straight base, without load equalisation Clear landing gear foot dimension or free swing radius towards rear approx. 1,920 mm Rear folding support 2x wheel chocks with holder Side protection in aluminium Underrun protection steel Quarter shell mudguards in front of and behind each axle With anti-spray flaps behind each axle 1x spare wheel holder for 1 emergency wheel, incl. wheel fixing kit 1x spare wheel, same manufacturer and design as main tyres, steel rim Axles & Suspension SAF drum brake axles "Axles/chassis laser measured" - reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally electrically operated from truck, including forced lowering & starting aid, without truck installation (starting aid functional up to axle overload of 30% and up to max. 25 km/h) Brake System 2-line compressed air brake system Colour-coded line routing for easy service. Spring-loaded parking brake 2 non-interchangeable coupling heads at front, without interconnection pipe 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With raise & lower valve Vehicle stability system "TPMS" Tyre Pressure Monitoring System according to ECE R 141, displayed via the truck's display, via EBS, without truck installation (precondition must be met in the truck. Only for main tyres) Wheels and Tyres 12x 235/75 R17.5 Twin tyres 12x steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting synchronised with indicator "Flashing side marker lights" 2 white LED position lamps at the front 2 white/red track marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connection cable Floor Birch plywood approx. 30 mm, high point load capacity for forklift axle load up to max. 5,600 kg Front bulkhead / front corner posts 25 mm aluminium hollow profile, 1,350 mm high, steel corner posts in volume design Front bulkhead inside additionally plated with 1,250 mm high birch plywood

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902029968, boş ağırlık: 6.100 kg, azami yük ağırlığı: 28.900 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2022, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 3.000 mm, süspansiyon: hava, lastik boyutu: 435/50 R19,5", The images are archive photos; the vehicle may still be in use! Specifications available upon request! Ljdpfx Acjwk Dcks Ijrl

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, bir sonraki muayene (TÜV): 06/2026, yükleme alanı uzunluğu: 7.480 mm, yükleme alanı genişliği: 2.354 mm, yükleme alanı yüksekliği: 1.460 mm, yükleme alanı hacmi: 25 m³, Donanım: ABS, Donanım: * Schmitz Cargobull termal kamyonet dorse * Uzaktan kumandalı Cramaro elektrikli brandası * WABCO Smart Board * Kaldırılabilir dingil * Havalı süspansiyon Lrjdpfx Aeyxbbgjc Iel * Disk frenler * Schmitz Cargobull dingilleri * Finişer freni * Devirme sırasında otomatik alçaltma * Lastikler: 385/65R22,5 * Katlanabilir yerden yüksek arka koruma, finişer ile uyumlu, kaldırma destekli * Arazi kalkış desteği (yalnızca kamusal yollar dışında kullanım için) * Küçük plastik alet kutusu * Ön duvarda 1 adet tırmanma merdiveni * Çelik yuvarlak kasa * Tam termo yalıtım Tüm bilgiler taahhütsüzdür. Hatalar ve ara satışlar saklıdır.

Koşul: ikinci el, kilometre: 371.811 km, güç: 265 kW (360,30 bg), ilk tescil: 10/2015, yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, bir sonraki muayene (TÜV): 10/2026, renk: gümüş, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı hacmi: 53 m³, yükleme alanı uzunluğu: 9.100 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 2.350 mm, Üretim yılı: 2015, Donanım: ABS, elektronik denge programı (ESP), hidrolik arka platform, klima, ANTOS 2536 L refrigerated box truck, 9.10 m, with MBB tail lift, 2 t. * THERMOKING UT-1200 (diesel engine) and stationary 380 V ELECTRIC cooling * Steerable and liftable trailing axle, 7.5 t * Vehicle No. for customer inquiries: 4652 * Engine version Euro VI, version 2 * Steerable, liftable, and unloadable trailing axle, 7.5 t * Distance-keeping assistant * Rear axle differential lock * Air conditioning * Safety Pack Classic * Lane keeping assistant * Roll control assistant * Tail lift * Active Brake Assist 3 * Attention assistant * High-performance engine brake * Rear air suspension * Axle configuration 6x2 Lrjdpfx Acsy Dwg As Isl * Electronic stability program (ESP) * Front axle air suspension * Driver airbag * Antos * Electronic braking system with ABS and ASR * Comfort driver's air-suspended seat * Transmission G 211-12/14.93-1.0 * Central locking comfort system * Mercedes PowerShift 3 * External sun visor, transparent * Fuel tank 390 L, left, 650 x 565 x 1250 mm, aluminium * Cruise control * High shelf on engine tunnel * AdBlue tank 60 L, left side * Hill-start assist, 30 km/h speed limiter * Roof hatch/roof ventilation flap * Electronic air supply unit for heating * M-Cab ClassicSpace, 2.30 m, 320 mm tunnel * Engine OM470, inline 6, 10.7 L, 265 kW (360 HP), 1800 Nm * Wheelbase 5800 mm * Tubeless tires, 315/70 R 22.5 HA * Tubeless tires, 315/70 R 22.5 VA/VLA/NLA * Additional stabilizer rear/trailing axle * Digital tachograph, EC, RPM, ADR * Environmental badge (green) * Two-seater No liability for typographical or printing errors Sale only to business customers Subject to prior sale and corrections* Changes, prior sale, and errors excepted. The description serves only for identification of the vehicle and does not constitute a warranty in the sense of commercial law. The purchase contract description is binding. * TOP SERVICE + QUALITY * We can provide you with a LEASING, FINANCING, or HIRE PURCHASE offer Warranty insurance available upon request through the insurer * TÜV / UVV LBW / Tachograph check and installation of OBU device through our on-site partners * Customs plates for 30 days All customs documents for export available on request, must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart airport or Metzingen (Württ) train station * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * over 200 vehicles permanently in stock

Koşul: ikinci el, boş ağırlık: 5.340 kg, azami yük ağırlığı: 30.660 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2014, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.340 mm, yükleme alanı yüksekliği: 1.500 mm, yükleme alanı hacmi: 25 m³, toplam uzunluk: 2.550 mm, toplam genişlik: 3.300 mm, süspansiyon: hava, lastik boyutu: 385 / 65 R 22,5, renk: mavi, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden. Aluminum body, work lights, alloy wheels, 3 axles, BPW axles, air suspension, first axle liftable, ABS (anti-lock braking system), roll tarp, catwalk, foldable underrun protection, front stabilizer, chute. Ledovhigkopfx Ac Ierl Body: Thermo insulated aluminum box tipper approx. 25 m³. Drum brakes. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Koşul: yeni, Yüksek kaliteli, tanınmış Alman markası KSB'nin ETANORM SYT ETNY065-040-200 model santrifüj pompası satılıktır. Cihaz, KSB'nin orijinal ambalajında sıfır ve depoda bekletilmiş olup, endüstriyel su tesisatları ile ısıtma ve soğutma sistemlerinde kullanım için idealdir. TEKNİK BİLGİLER Üretici: KSB Model: ETANORM SYT ETNY065-040-200 Kapasite (Q): 25,6 m³/h Basma Yüksekliği (H): 46 m Devir Hızı: 2950 d/dak Çark Çapı: 187 mm Gövde Malzemesi: EN GJS 400-15 Lsdpfeywu Uqex Ac Ierl Üretim Yılı: 2024 Flanşlı bağlantılar DURUMU Yeni, hiç kullanılmamış, depoda beklemiş Depolamadan kaynaklı minimum izler olabilir Orijinal KSB ambalajında KULLANIM ALANLARI Endüstriyel tesisatlar Su sirkülasyon pompaları HVAC sistemleri Isıtma ve soğutma tesisatları Terfi merkezleri

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33802030369, boş ağırlık: 31.110 kg, azami yük ağırlığı: 34.889 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2022, bir sonraki muayene (TÜV): 01/2027, toplam uzunluk: 7.390 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5*, renk: kırmızı, Üretim yılı: 2022, The images shown are archive photos; the vehicle may still be in use! Fine-grain steel welded construction, fifth wheel with replaceable 2" king pin, container mounts: 1 x 20-foot centered (or swap body container 7.15 / 7.45), not retractable at the front, container locking twist locks in the longer version. 24-ton 2-speed landing gear, single-sided operation, with straight base, without telescopic compensation. Wheel chocks with holder, side underrun protection, aluminium underrun guard, anti-spray mudflaps according to EC regulations, stainless steel drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip plate, perforated step plates, approx. 400 mm wide, left and right between the drip tray and longitudinal frame. Hose trays approx. 4500 mm in length (incl. hose compartment) for hose pipes 2 x DN 200 external + 2 x DN 160 centrally arranged, rear hose compartment (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all round with rubber seal, with drain hole at lowest point, then without lid on hose pipes, stainless steel grounding lug at the rear right of the frame, with international grounding sticker on the frame, rear access steps at the right onto underrun guard, rear right outside on main beam with step plate approx. 260 mm long & 300 mm wide. Axles & Suspension SAF disc brake axles, "axle/chassis laser alignment" reduces tire wear and fuel consumption, offset axle spacing 1410/1310 mm (intermodal transport) up to 44t gross train weight. Air suspension, first axle with automatic lift axle, including forced lowering and starting aid, operated by "brake three times" (starting aid functions up to 30% axle overload and up to a maximum speed of 25 km/h). Brake System 2-line compressed air brake system with color-coded line routing for easy maintenance. Spring-loaded parking brake. 2 non-interchangeable coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by tractors that ensure the proper functioning of the ABS! With raise & lower valve, vehicle stability control system. Axle load detection via EBS CAN bus signal for display in the truck cab (truck must be pre-configured; no installation on truck). Lodpfxjy Tvphj Ac Isrl Wheels and Tires 385/65 R22.5", brand at manufacturer's discretion, steel rims, factory silver. Electrics 24V system, multi-chamber lights, side yellow LED lighting, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable. Operating Notes The specified total weight is technically feasible. Depending on the cargo, the permissible total weight may not be achievable while adhering to allowed axle, support, and fifth wheel loads. (Poor driving and trailing behavior is possible due to incorrect load distribution.) This vehicle may only be loaded with 20’ tank containers that comply with ISO 668 and especially ISO 1496-3! The tank containers must have "end-load transfer areas" (end crossbeam load transfer zones)! Country of Registration / Signs Warning sign according to ECE-70, certification according to ADR 9.1.1.2, EX/II, EX/III / registration certificate for vehicles transporting certain dangerous goods (ex.B3) with warning sign at rear, not valid for materials according to UN 0331 and 0332 (explosives B-E), contour marking with reflective strips according to ECE R 048, white on the side, yello

Koşul: yeni gibi (kullanılmış), 25 linear meters Pallet Racking Nedcon Ledofi U Aispfx Ac Iorl New equipment, see pictures! A top-quality racking system from major manufacturer NEDCON – a subsidiary of Voestalpine AG headquartered in the Netherlands. Height: 3.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Load capacity per beam level: 3,050 kg. Asking price: €3,290 net ex stock The offer includes: + 10 uprights preassembled, 110 cm deep, 3.5 m high + 36 beams, 2.7 m length, 3,050 kg load capacity per level + 72 safety locking pins + 20 concrete anchors Load capacity signs, documentation, etc. are, of course, included. Additional accessories can be found in the accessories catalog. Uprights blue RAL 5019, bracing galvanized. Heights from 2 m to 7 m available from stock. Bay load 12 tonnes, higher bay loads possible upon request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m available from stock. Goods are in stock. Transport and assembly available upon request. Other configurations available on request. Over 2000 meters in stock. Visits possible by appointment at any time. Further information on request. Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. (Subject to changes and errors in technical data, information, and pricing, as well as prior sale! Please refer to our T&Cs, all prices excl. VAT ex stock) Purchase / Sale We are constantly seeking and offering numerous items from various sectors: - broom-clean clearance of industrial premises - business liquidations - fast – flexible – efficient! We also clear and/or dispose on behalf of insolvency administrators. Contact us with a few keywords; we will respond promptly. To visit our website, please click on our logo!

Üretim yılı: 2017, Koşul: ikinci el, Cooling unit / refrigeration unit Ledpfxeywkyij Ac Ierl Frigoblock Year of manufacture: 2017 Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Koşul: yeni, makine/araç numarası: 1f4581c873ed977cb9602039b, boş ağırlık: 3 kg, azami yük ağırlığı: 34 kg, toplam ağırlık: 38 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further information Chassis Semi-Trailer Container Fine-grained steel welded construction; fifth wheel with replaceable 2-inch kingpin Container mountings: 1 x 20-foot central position (or swap body container 7.15 / 7.45 m), front not retractable, container lock twist locks in extended version 24 t two-speed landing gear, single-sided operation, with straight base, without stroke compensation 2 wheel chocks with holders Side underrun protection Aluminum rear underrun protection Half-shell mudguards With anti-spray mud flaps according to EC Stainless steel drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, incl. drip plate, with perforated step plates, approx. 400 mm wide, left & right between drip tray and longitudinal beam 4 hose trays approx. 4500 mm long (hose box) for pipe diameters: 2 x DN 200 externally + 2 x DN 160 centered, rear hose box (stainless steel) 300 mm deep, splash-proof, cover (stainless steel) all-around with rubber seal, drain hole at the lowest point, then without cover on hose pipes 1 stainless steel grounding lug at the rear in FR-right on the frame, with international grounding label on the frame Access steps rear right on the underrun protection, rear in FR-right outside on the main beam step plate approx. 260 mm long and 300 mm wide Axles & Suspension SAF disc brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Axle spacing offset mm (Combined Transport) up to 44 t gross train weight Air suspension 1st axle with automatic lift axle, including forced lowering and start-assist, operation via 3 x braking (start-assist active up to an axle overload of 30% and up to a speed of max. 25 km/h) Brake system Lsdpfxei Rixkj Ac Ijrl 2-line compressed air brake system Color coded piping for easy servicing Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, no connecting cable Note: The trailer may only be towed by tractor units that ensure ABS functionality! With raise/lower valve Vehicle - dynamic stability control system Axle load detection via EBS CAN bus signal, for display in the driver’s cab, truck must be appropriately pre-equipped, no truck installation (no calibrated weighing system) Wheels and Tires 385/65 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin socket at the front, no connecting cable Operating notes The stated gross weight is technically possible, but depending on the cargo, the gross weight cannot always be reached while adhering to permissible axle, support and fifth wheel loads (poor handling and tracking may occur due to incorrect load distribution) This vehicle may only be loaded with 20’ tank containers conforming to ISO 668 and especially ISO 1496-3! The tank containers must have end-load-transfer areas (end transverse beam load transfer zones)! Country of registration / License plates Germany Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning plate according to ECE - 70 ADR approval according to section 9.1.1.2 of the ADR, EX/II, EX/III / type approval for vehicles for the carriage of certain dangerous goods (ex.B3) with warning plate at the rear, not valid for substances under UN 0331 and 0332 (explosives B-E) Outline marking

Koşul: ikinci el, Üretim yılı: 1993, makine/araç numarası: 1075-14, Teknik veriler yaklaşık olarak: - Dolum hacmi yaklaşık: 250 L - Granül beslemesi vakum ünitesi üzerinden - Isıtma gücü: 10 kW - Toplam tahrik gücü: 10,5 kW Lrsdox Hhbvspfx Ac Iel - Sıcaklık regülatörü - Basınçlı hava bağlantısı: 6 - 8 bar - Mobil (tekerlekli) tasarım - Gerekli alan: G 850 x Y 2350 x D 950 mm - Ağırlık: yaklaşık 180 kg

Koşul: ikinci el, azami yük ağırlığı: 27.290 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2020, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.853 mm, Donanım: ABS, SDS390 101m³ X-TRA Long Walking Floor, Lift Axle, SAF* German Semitrailer * 101m³ X-TRA Long model * SAF axles * Lift axle * Disc brakes * Floor: Walking floor with rear wear plate made of V2A stainless steel sheet, aluminum floorboards, 8 mm floor profile, ribbed design, end caps in aluminum * Tires: 385/55 R 22.5, 1st axle 9/9 mm, 2nd axle 12/10 mm, 3rd axle 11/9 mm * Empty weight: 7,710 kg * Gross permissible weight: 35,000 kg * Payload: 27,290 kg * Air suspension * All information without guarantee * Further information and specifications on request. Additional Services: * Repainting and retrofitting possible * Short-term or customs license plates available * Transfer and shipping possible * Assistance with customs and export documentation * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing available. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can also often assist customers with weak credit ratings and connect them with reputable leasing partners. * Own workshop * Mówimy po polsku. Lrederwvl Tepfx Ac Isl * We speak English. * Говорим по-русски. Repainting in your desired color is possible at our company at a reasonable price and in good quality. Are you located further away and have no opportunity or time to visit and inspect a truck in person? No problem—you are welcome to commission an independent expert of your choice to inspect the truck technically and visually. Should any deficiency arise contrary to expectations, we can rectify it quickly and efficiently in our workshop. Additionally, for an extra charge, we can deliver your new used vehicle Europe-wide.

Koşul: ikinci el, Üretim yılı: 2019, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: SC7.3 - 321ESE00112, soğutma kapasitesi: 7,32 kW (9,95 bg), giriş akımı türü: Klima, soğutma tipi: hava, toplam ağırlık: 90 kg, ortam sıcaklığı (maks.): 31 °C, ortam sıcaklığı (min.): 1 °C, giriş voltajı: 230 V, toplam genişlik: 600 mm, toplam uzunluk: 490 mm, toplam yükseklik: 1.303 mm, garanti süresi: 3 aylar, Donanım: Tip plakası mevcut, MTA Spotcooler SC7.3 Ljdpfx Asw Drtqjc Ijrl Manufacturer: THERMOBILE INDUSTRIES BV Model: Coolmobile 25 (Industrial Version) Mobile spot cooler Coolmobile 25 for targeted cooling of, for example, materials, cooling tunnels, room areas, and heat sources. The spot cooler is mobile on wheels and can be easily moved to the location to be cooled. The control panel has an adjustable temperature range from +1°C to +31°C and can be automatically switched on and off via a timer. With a standard Schuko plug (230V / 50Hz), the unit can be used anywhere. Cold air can be distributed via three flexible hose outlets. Warm air can be vented using a flange and warm air hose (both not included). Technical Data: Cooling capacity / kW: 7.32 (25,000 Btu) Air flow m³/h: 1,050 - 850 Power supply / V / Hz: 230 / 50 Starting current / A: 57 Operating current / A: 13 Power consumption / kW: 2.6 Air filters: Aluminium and carbon Max. static pressure / mm: 30 ΔT °C: 10 - 15 Max. room size / m²: 58 Dimensions (WxHxD) / mm: 490 x 1303 x 600 Weight / kg: 90 Outlet: 3 x 125 mm Max. duct length / m: 12 Connection cable / m: 3 Refrigerant: R407C (1.2 kg) Dimensions (mm) LxWxH: 490 x 600 x 1303 Weight (kg): 90 Serial No.: 321ESE00112 Year of manufacture: 2019 Condition: Visual 2, Technically OK Used Used machines may show visual defects due to usage. (Specifications subject to change and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Koşul: ikinci el, azami yük ağırlığı: 29.450 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2018, bir sonraki muayene (TÜV): 06/2026, yükleme alanı uzunluğu: 7.650 mm, yükleme alanı genişliği: 2.330 mm, yükleme alanı yüksekliği: 1.470 mm, yükleme alanı hacmi: 25 m³, Üretim yılı: 2018, Donanım: ABS, 3-Axle Schwarzmüller SK Steel Thermo Tipper 25 m³ VIN: JZ409190 Chassis / Attachments: * Air suspension with ECAS lift and lower function * Lift axle on 1st axle * SAF Intradisc axles * Disc brakes * Wabco SmartBoard * Tyres: 385/65 R22.5 * Tyre tread depth: * 1st axle: approx. 30% / 30% * 2nd axle: approx. 20% / 10% * 3rd axle: approx. 20% / 20% * Alcoa aluminium rims * Folding underrun protection * LED lighting * Additional LED reversing lights * Toolbox * Document holder * JOST landing legs Body: * Steel thermal insulated tipper body, fully insulated * Hardox steel tipper body * Capacity: approx. 25 m³ * Hyva front cylinder * Marcolin electric sliding cover with remote control * External rear wall * All-round sealing * Working platform with aluminium ladder * Suitable for asphalt and milled material Cargo space dimensions: * Internal length: approx. 7,650 mm * Internal width: approx. 2,330 mm * Internal height: approx. 1,470 mm Weights: * Gross vehicle weight: 36,000 kg * Payload: approx. 29,450 kg * Unladen weight: approx. 6,550 kg Other: * German registration * TÜV valid until 06/2026 Lrodpfx Acey Tfz He Ijl * Safety inspection (SP) valid until 12/2026 * Immediately operational ---- New main inspections, safety inspections or changes in gross weight (de-rating/up-rating) available on request. We are happy to assist you in obtaining export/transfer plates. Delivery of purchased vehicles within Germany is also possible. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing and typing errors, changes, interim sale, and mistakes reserved! ----Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in vehicle refurbishment and sales, we are a reliable partner for customers worldwide. Our particular strength lies in selling new and used commercial vehicles. On 11,000 m², we offer a wide range of vehicles. Our company philosophy is characterised by fairness and reliability. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide a competent contact person to support you when buying or selling vehicles. Convince yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organisation of special transports We are happy to support you in organising special transport. Temporary/export license plates We are happy to assist you in obtaining export or temporary license plates.

Koşul: yeni, Heidenhain TTR ERM 2048 A04 1R derecelendirme tamburu. 390 925-04 SN:27185453, kullanılmamış, %100 işlevsel, teslimat kapsamı fotoğraflardaki gibidir Lsdpfei Eazmjx Ac Iorl

Koşul: ikinci el, Fonksiyonellik: sınırlı işlevsellik, makine/araç numarası: WFDFLT33902030059, boş ağırlık: 7.452 kg, azami yük ağırlığı: 27.548 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2023, yükleme alanı uzunluğu: 13.460 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.655 mm, yükleme alanı hacmi: 92 m³, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.005 mm, süspansiyon: hava, lastik boyutu: 385/55 R22,5", renk: siyah, Üretim yılı: 2023, The images are archive pictures; the vehicle may still be in use! Weights and Dimensions: Gross weight, permitted / technical: 35,000 / 39,000 kg Payload, permitted / technical approx.: 27,548 / 31,548 kg Aggregate weight, permitted / technical: 24,000 / 27,000 kg Permitted / technical kingpin load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 7,452 kg +/- build tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Fifth wheel height approx.: 1,130 mm King pin installation dimension approx.: 1,640 mm Front corner measurement approx.: 2,040 mm Chassis Semi-trailer Freight Forwarder Fine-grain steel welded lightweight construction up to the landing legs, fifth wheel plate with replaceable 2'' kingpin Lashing point preparations integrated in the floor (up to 13 pairs) 24 t 2-speed landing gear, one-sided operation, with straight lower section, without compensating adjustment Extendable ladder at rear Side door holders Wheel chocks with brackets Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mudflaps Foldable protective cover for lighting unit Quarter-shell mudguards Rear collision protection Axles + Suspension BPW disc brake axles Air suspension 1st axle with automatic lift axle function, including forced lowering and starting aid, activated by braking three times Brake System 2-line compressed air brake system Color-coded pipe routing for easy service Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connection cable Wheels 385/55 R22.5" Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red lane marker lights at rear Lodpfxswk Dc Rs Ac Ierl 2 x 7-pin fail-safe sockets at front, without connection cable SB Hydraulics Hydraulic cylinder with sliding mechanism installed in the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump output: Capacity: 110 l/min Pressure: 250 bar Minimum oil tank volume: 100 l SB Tipper Body Aluminium box body made from high-quality, wear-resistant material. Front and side walls made of aluminium hollow profiles, all around the top welded with a wide special reinforcement profile made of aluminium, welded to a special frame at the bottom. Moving side wall for better unloading of the load, with reinforced curtain flaps at the bottom. Rear wall made of aluminium hollow profiles, double-wing door split 1/2 to 1/2, all around edged with a special U-profile with stop and rubber sealing, with 2 external rotary bar locks, locked above and below. Rear wall with mechanical safety lock, operated at the rear on the left in direction of travel. With swivelling crossbar at the top. Work platform with ladder access on both sides (left/right in direction of travel) and railing, for opening and closing the roof tarpaulin Removable and swiveling crossbars for tarp support + tarp support at the front bulkhead and at the rear on the back wall, Roll-out tarpaulin stored on one side with 2 longitudinal tensioning straps, 3 ratchet straps at the side, at the front bulkhead and over the rear doors the tarpauli