Kullanılmış Kaltenbach Tl 250 Alüminyum Testere satın al (18.681)

Koşul: mükemmel (kullanılmış), Üretim yılı: 2023, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 1591 / 1592, testere bıçağı çapı: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminium and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic operation. Based on the Profilma 502 model, it is specifically optimized for high-volume production and combined processing tasks—including the handling of entire profile stacks. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching positions can be programmed per job. The horizontal punching unit can be deactivated if necessary. Sawing Range & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cut from below, powered feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round shaft guidance - Remainder length: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching Unit: - Vertical and horizontal hydraulic punching units (discharge side) with automatic oil cooler Kdedpfxeyyzxhe Acmsl - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke continuously adjustable (also suitable for embossing) - Horizontal punching cylinder can be separately deactivated - Double stroke timing: 2 x 2–3 seconds - Punch scrap is discharged laterally from the machine frame - Conveyor belt 250 × 800 mm for part removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, voltage-free contact for extraction control - Minimum quantity spray unit with 2 x 3-liter tanks and fill level indicator - Noise protection package: hood and saw blade guard internally insulated - Roller conveyor (740 mm) with access protection on the infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing below the work table Max. Cutting Range: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 units available in total. ----- Attractive Offer – Flexible & Worry-Free We offer not just a high-quality product, but also tailored financing solutions to meet your requirements. Whether down payment, installment plan, or customized financing models—we’ll find the right solution together. Upon request, we also handle the entire transport logistics for you. From planning to reliable delivery, we ensure a smooth and punctual process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide expert and personalized consultation. Subject to prior sale, modifications, and errors excepted!

Koşul: iyi (kullanılmış), Kaltenbach soğuk daire testeresi KKS Maschnr.6995Saegeblatt Ø 350 mm-hız 130 m / dk-ağırlık toplam 1200 kg Kdodpfod Tp Nlsx Acmsl

Koşul: ikinci el, Üretim yılı: 2012, Testere bıçağı çapı 400 mm 90 derece kesim aralığı: yuvarlak 130 mm 90 derece kesim aralığı: kare 110 mm 90 derece kesim aralığı: düz 180 x 100 mm Testere bıçağı devir sayısı 3000 d/dk Toplam güç ihtiyacı 2,2 kW Makine ağırlığı yaklaşık 0,51 t Boyutlar U x G x Y 3,8 x 1,6 x 1,7 m Otomatik alüminyum dairesel testere - El çarkı, katlanabilir dayanak ve dijital sistemli 4000 mm çıkış makaralı konveyör Kdjdpfx Acoy N D Nhjmel - 3500 mm giriş makaralı konveyör - Taşıma ölçüleri 6,0 m x 2,0 m x 1,6 m

Koşul: ikinci el, Double Mitre Saw – FOM ALVA 450 B Professional double-head saw for cutting aluminium, PVC and light alloy profiles, ideal for window and door frame production. Year: 2002 Saw blades in carbide (widia) Ø 450 mm Three-phase motors 3 HP (2.208 kW) – 2800 rpm – 230/400V – 50 Hz Direct drive motor – carbide blade Blade shaft Ø 32 mm Head tilt: 90°   45° external Kdedjyylikjpfx Acmel   22.5° external   intermediate angles with mechanical stop and vernier scale reading First head fixed Second head mobile: automatic positioning, with manual override option Automatic positioning speed (for mobile head): 12 m/min Mobile head positioning accuracy: +/- 0.1 mm Minimum cutting capacity between heads: 300 mm (can be reduced with customised software) Maximum cutting capacity between heads: 4000 mm Carbide blade feed: hydropneumatic (adjustable feed rate – rapid return) Electrical panel separated from pneumatic system Dual working pressure, servo-controlled at low pressure Air consumption per working cycle: 28 Nl (normal litres) Vertical and horizontal pneumatic clamps Spray-mist lubrication of the cut Prepared for chip and fume extraction (1) Working pressure: 7 bar (adjustable) Mobile head roller conveyor (3 m) Machine in working condition.

Koşul: iyi (kullanılmış), Üretim yılı: 2015, Fonksiyonellik: tamamen fonksiyonel, testere bıçağı çapı: 600 mm, 90°'de yuvarlak çelik kesme aralığı: 220 mm, Satılık: 1 adet kullanılmış CNC alüminyum tam otomatik daire testere, emiş ünitesi dahil Üretici: Tronzadoras MG Model: GAA-600 - CNC ÜRETIM YILI: 2015 TEKNİK BİLGİLER - Kesme aralığı yuvarlak: 220mm, kutu: 300 x 90mm, kare: 175mm Kdjdpfx Aouyyhaocmjl - Tahrik gücü 4,1 KW / 400 V / 50 Hz - Hız 3000 rpm. - Kesme hızı 55 m/sn. - Bıçak boyutları 600 x 50 mm - maks. kesme yüksekliği 220 mm - Boyut 2020 x 1510 x 975 mm - Ağırlık 650 kg Makine, 6 m besleme rulolu konveyörü ve uygun ekstraksiyon sistemi ile birlikte gelir. Testere 09599 Freiberg'deki depomuzda incelenebilir.

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2017, İkinci el otomatik alüminyum daire testere MEP Cobra 352 nc 5.0 Kdjdpfxewu Tz Re Acmel Üretim yılı: 2017 Bıçak boyutları: 350x32x3,4 mm Bıçak kesim hızı: 1700/3400 rpm Kesim açısı: -45° ile +45° arası Kesim kapasitesi 0°’de: yuvarlak: 120 mm, kare: 105 mm, dikdörtgen: 180x70 mm Dokunmatik ekran Makine ağırlığı: 605 kg

Koşul: iyi (kullanılmış), Üretim yılı: 2018, Fonksiyonellik: tamamen fonksiyonel, Donanım: devir hızı sonsuz değişken, dokümantasyon / kılavuz, The F45 ProDrive sliding table saw is a powerful, high-precision machine, with a current new price of over €52,000 (net). It is ideally suited for the precise and largely automated cutting of sheet metal, aluminum, and other light metals. Kdjdpfx Aey Enugscmel +The 7.5 kW Vario motor provides variable speed control, enabling clean cuts even in large workpieces with a saw blade diameter up to 450 mm. +The double roller carriage (3,000 mm) with TIP-SERVO-DRIVE ensures effortless and controlled movement of heavy panels using a joystick. +The CNC rip fence (1,300 mm) is automatically and precisely positioned, increasing repeatability and accuracy. +With the Digital L miter crosscut fence (3,200 mm), angles can be set digitally for precise angled cuts. +An air cushion table allows large workpieces to be moved with virtually no resistance. +The spray unit (on/off via remote control) improves cutting quality and reduces friction. +The table extension (840 mm) and the front support roller provide additional assistance when handling long materials. +The pneumatic quick-release clamps (2 pcs., 0–90 mm) securely and rapidly fix workpieces, making your workflow more efficient and precise. F45 Format Sliding Table Saw F45 ProDrive Motor: 7.5 kW Vario Max. saw blade diameter: 450 mm Double roller carriage with carriage length 3,000 mm, TIP-SERVO-DRIVE CNC rip fence 1,300 mm Digital L miter crosscut fence, 3,200 mm Air cushion table Spray unit with remote control Table extension 840 mm Front support roller Pneumatic quick-release clamps, 2 pcs., 0–90 mm

Koşul: yeni, Üretim yılı: 2023, SPECIAL PRICE, Stock machine model year 2023! List price standard machine + option Minimum Quantity Lubrication System "LUBETOOL": €28,810 STOCK MACHINE -- Fully automatic aluminium circular saw, 90° cutting with drilling unit TR 12 (up to ø 10 mm) or TR 20 (up to ø 20 mm) featuring simple, safe operation and outstanding cutting performance. This machine allows 90° cuts only! Workpieces can be drilled and cut in a single operation! Technical Data: ● Cutting area: 90° round: 100 mm / square: 100 x 100 mm / rectangular: 170 x 60 mm ● Drive power: 1.9 kW / 400 V / 50 Hz ● Speed: 3000 rpm ● Feed: Single stroke 300 mm (double stroke up to 600 mm) ● Max. cutting height: 100 mm ● Blade size: 350 x 32 mm Standard Equipment: ● Machine for 90° cuts, equipped with a powerful drive motor ● Ergonomically designed, large-format control panel ● Adjustment of cutting length from 5 to 300 mm via handwheel and counter ● Main vice with 3 pneumatic clamping cylinders, 1 horizontal, 2 vertical ● Feeding vice with both horizontal and vertical pneumatic clamping cylinders ● Large safety guard covering the entire working area, pneumatically lifted ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for extraction system ● TR 12 or TR 20, fixed automatic drilling unit with single tool holder; spindle speed, drilling depth, etc. set manually, drilling cycle runs automatically ● Optionally installed on the stock machine: Minimum Quantity Lubrication System "LUBETOOL" with two pumps --> Also available as CNC version or in various sizes! Kodpjmftiwsfx Acmodl

Üretim yılı: 2011, Koşul: mükemmel (kullanılmış), SİCA TRS/C/SY/U/CNC. 32-250 PLAETAR BORU KESME MAKİNESİ Merkezli mengene ile, boru sabitleme Uygulama: PVC, PE, PP boruların kesilmesi ve pah kırılması Talaş vakum fanı ile birlikte Min. çap: 32 mm Maks. çap: 250 mm Üretim yılı: 11-2011 Kdjdpfx Aceyru Eqjmol Makinenin konumu: Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Bahnhofstraße 6 Makine bana aittir.

Koşul: yeni, Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, toplam uzunluk: 1.000 mm, toplam genişlik: 600 mm, toplam yükseklik: 1.400 mm, 45°'de yuvarlak çelik kesim aralığı: 90 mm, kesme yüksekliği (maks.): 105 mm, testere tahriki: 4.700 W, boş ağırlık: 200 kg, COSEN KREISSÄGEN MANUELL MC-315 Diese Kreissägen sind neu im COSEN-Portfolio und in manueller Ausführung erhältlich, d.h., der Hebel muss zum Sägen per Hand nach unten gezogen werden. Technische Merkmale: Kompakte, säulenmontierte, handbetriebene Kreissägen, die sich einfach in der Werkstatt oder auch in der Produktion handhaben lassen. Handbetätigte Spanneinrichtung Schwerlast-Motor Robuste Bauweise Niederspannungs-Ein/Aus-Schalter Gehrungsschnitte 45° und 90° Zwei Schnittgeschwindigkeiten Elektrische Kühlschmiermittelpumpe mit Tank COSEN MC-315 NETZSPANNUNG: 400V SÄGEBLATTDURCHMESSER: 315 mm MOTORLEISTUNG: 4,7 kW ABMESSUNGEN: 1000 x 600 x 1400 mm GEWICHT: 200 kg DREHZAHL: 45/90 U/min MAXIMALE SCHNITTLEISTUNG RUNDMATERIAL 90°: 105 mm; 45°: 90 mm VIERKANTMATERIAL 90°: 85 x 85 mm; 45°: 80 x 80 mm RECHTECKMATERIAL 90°: 120 x 60 mm; 45°: 90 x 60 mm Preis ist EXW (Lager Europa), inkl. Verladung auf Lkw. Transport, Installation, Inbetriebnahme, Schulung sowie jährliche Wartungsverträge sind auf Anfrage gegen Aufpreis erhältlich. Kodpfx Acev R Dxasmjdl Installation und Schulung erfolgen stets durch unser hochqualifiziertes Serviceteam an drei Standorten in Europa: Niederlande, Deutschland, Rumänien.

Koşul: iyi (kullanılmış), Üretim yılı: 2009, Fonksiyonellik: tamamen fonksiyonel, testere bıçağı çapı: 500 mm, Donanım: dokümantasyon / kılavuz, Teknik veriler ve kesim diyagramı yan taraftan indirilebilir. Her strokta 730 mm, 3 tekrarla sınırlıdır. Testere bıçakları Ø 500 x 4,4 x 30 mm Kdodpfjy D Sywex Acmsl Kesim yalnızca 90° açıda yapılabilir. 3 tekrar ile maksimum kesim uzunluğu: 2180 mm

Koşul: mükemmel (kullanılmış), Üretim yılı: 2016, Fonksiyonellik: tamamen fonksiyonel, testere bıçağı çapı: 500 mm, Çift açılı alüminyum daire testere yarı otomatik model Açı aralığı 90° -45° sağ/sol, -60° sol tahrik 4,0 kW-400 V/50 Hz testere bıçağı hızı 50 m/s testere bıçağı ölçüleri Ø 500 x 30 x 4,0 mm boyutlar 1488x960x1540 mm masa yüksekliği 1067 mm ağırlık 500 kg Aksesuarlar: Kedpfx Aey Av T Eecmedl - 5 m giriş makaralı konveyör 230 mm - 3 m çıkış makaralı konveyör 230 mm, dijital ölçüm dayanağı ile

Koşul: yeni, Üretim yılı: 2026, Kesmeniz gereken iş ne olursa olsun, A700 ihtiyacınız olan tek testeredir. Sınıfının en büyük kapasitesine ve devasa ±75º gönye açısı aralığı özelliğine sahip olan bu ürün, kesmeniz gerekebilecek alüminyum profillerin boyutundan ödün vermeden gerçek yüksek gönye açılı kesim için tasarlanmıştır. Çok sayıda profili aynı anda ve yüksek hassasiyetle kesmek için uygundur. Hassas PLC kontrollü hareket ile yüksek hızlı alüminyum işleme. Pnömatik tahrikli güvenlik koruması, testere tablasına tam engelsiz erişim için bir düğmeye basarak açılır ve kapanır. Koruma kaldırıldığında testereyi devre dışı bırakan güvenlik anahtarı. Dokunmatik ekran kontrolü ile isteğe bağlı CNC kontrollü testere gönye açısı konumlandırma. Kdsdpfx Ajmb U Tuocmsl - Ø700 mm TCT testere bıçağı, 4 kW tahrik motoru ile - AS / NZS 4024:2014 güvenlik standardı, iki elle presle kesme işlemi - Testerenin her iki yanında 900 mm'lik güvenlik tünellerine sahip baş üstü güvenlik koruması - Bir düğmeye basılarak pnömatik olarak kaldırılabilen güvenlik koruması - Koruma yukarıdayken testere çalışmasını devre dışı bırakan güvenlik anahtarı - Ayarlanabilir kelepçe basıncına sahip 2x dikey ve isteğe bağlı 2x yatay kelepçe - 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75°'de pim yerleştirme ile ±75° gönye açısı - Sprey sisli bıçak yağlama sistemi - Hava tabancası ve LED iç aydınlatma - Talaş toplama için 2× Ø100 mm bağlantı noktaları - Opsiyonel 2,2 kW talaş vakum çıkarıcı - Opsiyonel otomatik gönye kontrol sistemi Şunlar için son derece uygundur: - Dökme alüminyum üretimi - Gönyeli alüminyum yapı imalatı - Pencere ve kapı imalatı - Panjur, gölgelik ve mobilya imalatı - Fabrikasyon alüminyum yapı imalatı - Alüminyum cephe imalatı

Koşul: yeni, Üretim yılı: 2026, Alüminyum kesim verimliliğinizi en esnek, geniş kapasiteli testerelerden biriyle artırın. A550, kesmeniz gerekebilecek alüminyum boyutundan ödün vermeden gerçek yüksek açılı kesim kapasitesi sağlamak için büyük kapasiteli bir bıçakla desteklenen ±75º'lik büyük bir testere gönye aralığı ile yüksek gönye açılı kesim için tasarlanmıştır. Birçok profili aynı anda ve yüksek hassasiyetle kesmek için uygundur. Hassas PLC kontrollü hareket ile yüksek hızlı alüminyum işleme. Tam engelsiz testere tablası erişimi için bir düğmeye basarak pnömatik tahrikli güvenlik koruması açma ve kapama. Güvenlik anahtarı, koruma yukarıdayken testereyi devre dışı bırakır. Dokunmatik ekran kontrolü ile isteğe bağlı CNC kontrollü testere gönye açısı konumlandırma. - Ø550 mm TCT testere bıçağı, 4 kW tahrik motoru ile Kdodpjmb U Tfefx Acmel - AS / NZS 4024:2014 güvenlik standardı, iki elle presle kesme işlemi - Testerenin her iki yanında 900 mm'lik güvenlik tünellerine sahip baş üstü güvenlik koruması - Bir düğmeye basılarak pnömatik olarak kaldırılabilen güvenlik koruması - Koruma yukarıdayken testere çalışmasını devre dışı bırakan güvenlik anahtarı - Ayarlanabilir kelepçe basıncına sahip 2x dikey ve isteğe bağlı 2x yatay kelepçe - 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75°'de pim yerleştirme ile ±75° gönye açısı - Sprey sisli bıçak yağlama sistemi - Hava tabancası ve LED iç aydınlatma - Talaş toplama için 2× Ø100 mm bağlantı noktaları - Opsiyonel 2,2 kW talaş vakum çıkarıcı - Opsiyonel otomatik gönye kontrol sistemi Şunlar için son derece uygundur: - Pencere ve kapı imalatı - Gönyeli alüminyum yapı imalatı - Alüminyum fabrikasyon yapı imalatı - Kompozit üretimi - Panjur, gölgelik ve mobilya imalatı - Alüminyum perakende satışları

Koşul: yeni, Üretim yılı: 2026, Alüminyum üretiminizi yüksek hızlı, yüksek güvenlikli, İSG uyumlu bir testereye yükseltin. A420, düz veya gönyeli alüminyum parçaların (±75°'ye kadar) küçük profilli kesimi için kullanımı kolay bir testeredir. İki elle presle kesme ve tam testere koruması (her iki tarafta 900 mm tüneller dahil) ile yüksek güvenlikli çalışma, testereye erişimi ve kontrolsüz kesiklerin dışarı atılmasını önler. Pnömatik kaldırılabilir koruma tek bir düğmeye basarak açılır ve kapanır. Koruma yukarıdayken testereyi devre dışı bırakan güvenlik anahtarı. - Ø420 mm TCT testere bıçağı, 2,2 kW tahrik motoru ile - AS / NZS 4024:2014 güvenlik standardı, iki elle presle kesme işlemi - Testerenin her iki yanında 900 mm'lik güvenlik tünellerine sahip baş üstü güvenlik korumaları - Engelsiz testere tablası erişimi için bir düğmeye basılarak kaldırılabilen güvenlik koruması - Koruma yukarıdayken testere çalışmasını devre dışı bırakan güvenlik anahtarı - Ayarlanabilir kelepçe basıncına sahip 2× dikey ve 2× yatay kelepçeler - Ayarlanabilir testere gönye açısı ±75° - Daha fazla kesme kapasitesi için hareketli arka çit - Sprey sisli bıçak yağlama sistemi - Hava tabancası ve LED iç aydınlatma - Talaş toplama için Ø100 mm bağlantı noktası - Opsiyonel 2,2 kW vakumlu talaş çıkarıcı Şunlar için son derece uygundur: - Pencere ve kapı imalatı Kdedpfxemb U Tbj Acmol - Ticari ofis üretimi - Veri merkezleri üretimi - Lineer aydınlatma üretimi - Panjur ve gölgelik imalatı - Kompozit üretimi

Koşul: ikinci el, Saw blade diameter: 350 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 mm Cutting capacity at 45 degrees: square 100 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Saw blade speeds: 1700 / 3400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 0.210 t Dimensions (L x W x H): 0.9 x 1.4 x 1.4 m Manual circular saw for cutting aluminium, mitre cuts from 45° right to 45° left and saw head swivel range from 0° to 45° to the left. On the Cobra 352 MA (with automatic vice), the vices close automatically when the saw head is lowered. • Roll-bearing turntable for fast and precise mitre adjustment • Screw locking mechanism to lock the saw head in any angle position • Automatic saw blade lubrication • Clamping system consists of two vices • Saw head lock in upper position • Adjustable length stop for identical cut lengths • Vice opening: 180 mm Kdedpfx Aefc T Ufscmol

Koşul: iyi (kullanılmış), Üretim yılı: 2002, Fonksiyonellik: tamamen fonksiyonel, kesme yüksekliği (maks.): 300 mm, kesme genişliği (maks.): 360 mm, toplam ağırlık: 780 kg, masa yüksekliği: 300 mm, 45°'de yuvarlak çelik kesim aralığı: 265 mm, 90°'de yuvarlak çelik kesme aralığı: 303 mm, kesme hızı: 90 mm/dak, 90 derecede kesme kapasitesi: Yuvarlak: Ø303 mm Kare GxY: 360 x 305 mm 45 derecede kesme kapasitesi: Yuvarlak: Ø265 mm Kare GxY: 265 x 300 mm 30 derecede kesme kapasitesi: Yuvarlak: Ø175 mm Kedeyac Uispfx Acmodl Kare GxY: 175 x 300 mm Kesme hızı: 20 - 90 m/dak. Şerit testere: 3830 x 25 x 0,9 mm / 3850 x 27 x 0,9 mm Çalışma yüksekliği: 700 mm Donanım: - Gönye testeresi - Yarı otomatik - Yaklaşık 8 metre rulolu konveyör - Kullanım kılavuzu Menşei: Almanya Motor gücü: 1,1 kW Makine ölçüleri UxGxY: 2200 x 1250 x 1650 mm Makine ağırlığı: 780 kg

Koşul: ikinci el, Üretim yılı: 1989, Testere bıçağı çapı: 400 mm 90 derecede kesme kapasitesi (daire): 120 mm Kjdpfx Asy D A E Decmjdl Devir sayısı: 1400 / 2800 d/dk Motor gücü: 4,0 kW Makine ağırlığı: yaklaşık 180 kg Boyutlar (U x G x Y): 1,0 x 0,9 x 1,2 m Manuel yer altı alüminyum daire testere

Koşul: yeni, Üretim yılı: 2026, Yatay açılı ayarı 15°- 90°15° kademesiz, testere motoru 5,50 kW (400 Volt), testere bıçağı 600 mm, mesafe aralığı arka dayanak 180 mm, çalışma yüksekliği ayaklar üzerinden ayarlanabilir 940 ila 1000 mm, 2 x emiş bağlantısı (üstte kapakta ve altta), net ağırlık 600 kg, E x B x Y 135x140x150 cm, RAL 9007 gri alüminyum, döner tabla taşlanmış nikel çelikten, testere kafası yüksek hassasiyet, uzun ömür ve yüksek rijitlik için bilyalı kızaklarla donatılmıştır. Testere malzemesi, kapak açıkken düşük basınçla ön gerilebilir. Hidropnömatik bıçak ilerlemesi ve talaş akışı emiş başlığı yönünde. Mesajınızı bekliyoruz! Plantec Maschinen GmbH Kdedpfx Asfv T Anocmel

Koşul: yeni, Üretim yılı: 2026, Product innovation: Sawing System Type “ORIX” The ORIX sawing system enables fully automatic processing of a wide range of aluminium profiles. The machine is built on a robust base frame. For precise positioning of the saw unit, linear guides and precision carriages are utilized. The drives are equipped with servo motors. For sawing operations, the saw unit travels forward 300 mm along the Y-axis, allowing easy cutting of special profiles, plates, as well as Item and Bosch profiles. The support table consists of movable rollers, which are automatically positioned according to the desired cut length. All rollers are also mounted on precision carriages. The saw features a sturdy discharge table for depositing the cut aluminium parts. Optionally, the cut pieces can be automatically transported away—including swarf—via a conveyor belt. The machine offers a maximum cutting length of 6,000 mm, resulting in an overall length of 7,000 mm. The sawing system is supplied with a matching 2-channel minimum-quantity lubrication system. Additionally, it can be fitted with a 400 mm or 600 mm saw blade, depending on your requirements. Your Advantages: • Nearly scratch-free operation, as material is not pushed over a cast table • Improved removal of swarf (no extraction system required) • Extremely compact footprint: 4,000 mm / 7,000 mm • Smaller offcut (only 50 mm remnant length) • Safe operation (light curtain protection) • Easy material disposal (via conveyor or brush-equipped table) Kdodpsfu Tgrofx Acmol • No resetting required as with conventional automatic saws • No dimensional deviation • Plug-in rollers securely hold any type of special profile, ensuring perfect cuts Operating Procedure: Enter the desired profile length in the control system. The saw unit then moves to the specified position. The operator inserts the aluminium profile and starts the saw. Using an end-cut recognition sensor, the saw determines the correct initial cut position. The cut is performed. After sawing, the unit retracts and repositions itself for the next set coordinate, then repeats the cutting operation. These procedures are repeated until the entire profile is processed. All cut parts are gently placed on the discharge table or conveyor. Material clamping is performed directly at the saw unit using vertical and horizontal clamps, as is standard with aluminium saws. Once the profile is fully processed, the saw head automatically returns to the loading position for the next operation. The process can be repeated as required. Optionally, cross conveyors can be integrated for automated feeding. For safety, fencing or a light curtain can be installed. The control system is available in two versions: Diethei or Siemens control. Optional material sorting into different bins or by length is possible. You are always welcome to view the equipment at our manufacturing/demo facility. Contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Koşul: yeni, Üretim yılı: 2026, The fully automatic aluminium circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) has been specially developed for cutting profile and solid materials made of aluminium cast, copper, and hard plastics. The automatic feed and automatic cutting movement are ideal for fast and precise serial production! The material feed per stroke is up to 700 mm. Multiple strokes, and thus longer cut lengths, can be conveniently programmed from the operator panel. The main clamping vice secures the material with two horizontal and two vertical pneumatic cylinders, while the feed clamping system uses one horizontal and one vertical pneumatic cylinder. Both cutting and feed speeds can be adjusted according to the material through the large, user-friendly control panel! The machine is equipped with a mechanical stroke height adjustment, and the maximum cutting height is 100 mm. A large protective hood covers the entire working area and can be raised pneumatically at the push of a button! Standard equipment for the UK 350 A 90° CNC + drilling unit includes an air blow gun for cleaning the machine. Connections for a chip extraction system are provided. The machine is equipped with the TR 14 vertical drilling unit (drilling capacity up to ø 14 mm, thread M12), which is integrated into the cycle control of the aluminium circular saw. Equipment: • Machine for 90° cuts, with a powerful drive motor • CNC control; input of quantity and cut length is easily done from the large, clearly arranged operator panel! • Storage of up to 20 cutting programs • Feed drive via servo motor, single feed stroke 700 mm (for longer pieces, the feed automatically advances to the desired length!) • Main vice with four pneumatic clamping cylinders, two horizontal and two vertical • Feed vice with one horizontal and one vertical pneumatic clamping cylinder • Large protective hood covering the complete work area, pneumatically lifted • Cutting and feed speeds adjustable • Maximum cutting height 100 mm • Air blow gun for cleaning the machine • Connections for an extraction system • Saw blade diameter 350 mm • TR 14, fixed automatic drilling unit with tool holder • Spindle speed, drilling depth, etc. are set via the machine control, drilling cycle runs automatically Technical Data: Drive power: 1.9 kW / 400 V / 50 Hz Kdsdpfx Acekqz H Djmol Speed: 3000 rpm Blade dimensions: 350 x 32 mm Material feed single stroke: 700 mm Max. cutting height: 100 mm Dimensions: 1400 x 850 x 970 mm Optionally available with loading magazine! We look forward to your enquiry! Plantec Maschinen GmbH

Koşul: yeni, Üretim yılı: 2026, Aluminium Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an “upcut” machine, primarily used for cutting profile materials made of cast aluminium, copper, and hard plastics (solid materials to a limited extent). This machine is characterized by its user-friendly operation and fast, convenient material changeover. Only 90° cuts are possible with this machine! Saw feed is automatic via push-button operation, and material clamping is performed with two pneumatically controlled vertical and horizontal clamping cylinders each. The standard equipment includes a minimum-quantity lubrication system and an air blow gun for cleaning the machine! The machine is also equipped with connections for a chip extraction system. Optional features include a digital mitre angle display, a marking laser, and pneumatic hood lifting. Features: Kdsdpfxopa Nxds Acmjl - Large support table, high-performance drive motor - Two-button control for initiating the cutting cycle (optional single-button operation available) - Clearly arranged control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material stop jaw can be shifted to the rear to increase cutting capacity - Large safety guard covering the entire working area - Minimum-quantity lubrication system with 2-liter reservoir - Adjustable blade / feed rate - Air blow gun for machine cleaning - Saw blade diameter 600 mm Operating Procedure: 1. Set the cutting angle 2. Insert the material 3. Adjust the stroke speed 4. Move the clamping cylinders up to 20 mm to the material 5. Clamp the material 6. Press the start button to ready the machine. 7. Press and hold both cutting buttons, the material is sawn. 8. After the cycle ends, release both cutting buttons and press the STOP button 9. Open the vice and remove or reposition the material For technical data such as cutting range, power output, etc., please refer to the datasheet attached to the email. We look forward to your inquiry! Plantec Maschinen GmbH

Koşul: yeni, Üretim yılı: 2026, Aluminum Circular Saw UK 650 HA, Semi-Automatic The semi-automatic circular saw UK 650 HA is an “upcut” machine, primarily used for cutting profile materials made from cast aluminum, copper, and hard plastics (solid materials only to a limited extent). The machine is distinguished by its ease of use, quick and convenient material changeover, as well as simple mitre angle adjustment. The UK 650 HA features stepless mitre angle adjustment to the left and right up to 20° (swivel range twice 70°). Saw feed is automatic at the push of a button; material clamping is provided by two pneumatically operated vertical and two horizontal clamping cylinders. As standard, the machine comes equipped with a minimum quantity lubrication system and an air spray gun for cleaning the machine. Connections for a chip extraction system are available. Additionally, this machine can optionally be equipped with a digital mitre angle display, a scribing laser, and a pneumatic system for lifting the protective cover. Equipment - Double mitre 20°–90°–20°, large support plate - Powerful drive motor - Two-button control for initiating the cutting process (optionally available as single-button control) - Intuitive control panel - Adjustable saw blade or cutting feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material stop jaw can be moved backwards to increase cutting capacity - Large protective hood, covers the entire working area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade ø 650 mm Operating Procedure 1. Set the cutting angle 2. Insert the material 3. Adjust the stroke speed 4. Move clamping cylinders to within approx. 20 mm of the material 5. Clamp the material 6. Press the Start button to make the machine ready for operation 7. Press and hold both SAW buttons to perform the cut 8. After the cycle, release both SAW buttons and press the STOP button 9. Open the vise and remove or advance the material You are welcome to view the desired unit at any time in our production/demonstration hall. Please feel free to contact us. Kodpfx Acjidun Dsmedl We look forward to your inquiry! Plantec Maschinen GmbH

Koşul: yeni, Üretim yılı: 2026, Aluminum Circular Saw UK 352 P, manual The semi-automatic circular saw UK 352 P is an 'upcut' machine primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (suitable for solid material to a limited extent). The machine stands out due to its easy operation, rapid and convenient material changes, and simple mitre angle adjustment. The UK 352 P offers a continuously adjustable mitre range from 45° left to 0° right. The saw feed is automatic at the press of a button, and the material is clamped using two pneumatically controlled vertical clamping cylinders. As standard, the machine is equipped with a minimal lubrication system and an air spray gun for cleaning the saw. Connections for a chip extraction system are provided. Equipment - Manual saw blade guidance - Double mitre: 30° – 90° – 0°, large support table - Powerful drive motor - Clearly arranged control panel - Two vertical pneumatic clamping cylinders - Fixed material stop, which can be shifted backwards to increase cutting capacity - Large safety cover, protects the entire work area Kdedpfx Acsidunvjmol - Minimal lubrication system - Air gun for cleaning the machine - Saw blade diameter: 350 mm Operating Procedure 1) Set the cutting angle 2) Place the material 3) Move the clamping cylinder up to 20 mm from the material 4) Pneumatic clamping of the material 5) Press the start button to run the saw blade 6) The cutting process is carried out manually with the hand lever 7) Switch off the machine after the cut! You are welcome to arrange a viewing of the equipment in our manufacturing/showroom at any time. Feel free to contact us for more information. We look forward to your inquiry! Plantec Maschinen GmbH

Koşul: yeni, Üretim yılı: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine primarily used for cutting profile materials made of aluminum cast, copper, and hard plastics (solid material is possible under certain conditions). This machine stands out due to its ease of operation, quick and convenient material changes, and simple miter angle adjustment. The UK 352 HA features a steplessly adjustable miter range of up to 45° to the left and 0° to the right. Saw blade feed is automatic at the press of a button, and material clamping is achieved by two pneumatically operated vertical clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine. Connections for chip extraction systems are also provided. Features • Precision under-table circular saw • Miter adjustment: left 45º / 90º / right -45º • Including 2 pneumatic vertical clamps • Steplessly adjustable saw blade feed • Two-hand safety control Kjdpfx Ajgwt Rrecmjdl • Adjustable rear material stop • Chip extraction device – suitable for chip extraction unit • Mist spray system for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included! You are welcome to inspect the desired system at any time in our production/demo hall. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH