Kullanılmış Fliegl Dhka 390 30M³ Revoltion satın al (2.129)

Koşul: yeni, makine/araç numarası: 408ba9a39bbb8087056d6e563, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Lowbed Trailer Psdpfx Aloi Ri Dae Ispt Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear splash guard Semi-shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle, anti-spray flaps in front of and behind 3rd and 4th axles Excavator arm recess over the rear axles, running to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes rated 5 t each in the excavator arm recess at the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear incline 1 plastic toolbox, with insert shelf, w=620/h=360/d=440 mm, lockable with padlock (lock not included) 1 storage box recessed in the gooseneck in the floor with lid, W=720 mm/L=520 mm/D=170 mm Extendable width to 3,000 mm (not in the rear incline) (track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm) Timber beams 70 mm for extension to 3,000 mm Storage compartment for timber beams under loading area Lashing rings lowbed (40 lashing points) 1 pair of lashing rings on gooseneck, each 5t 9 pairs of lashing studs, integrated in the top and side of outer frame, each 10t 2 x on gooseneck in front 7 x in the lowbed area 6 pairs of lashing holes in the outer frame of the lowbed area, 5 t each (for tie-down straps) 3 additional pairs of folding lashing rings, each 10 t 1 x inside next to main frame at start of lowbed 1 x on gooseneck (protrudes) 1 x recessed in the floor behind the last axle Trailer drawbar assembly Drawbar with tested 50 mm towing eye, towing eye inclined at 8°, D-value minimum 160 kN Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation front and rear (rocker compensation) Wheels and Tires 235 / 75 R 17.5 as selected by manufacturer Steel twin wheels, factory silver Brake system 2-line air brake system Spring-loaded parking brake 2 anti-mismatch coupling heads at front, with connection lines to truck ABS and ALB, with ABS plug at front, with connection cable Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red marker lights at rear 2 x 7-pin anti-mismatch plugs at front, with connection cable 1 LED rotating beacon with holder, controlled via parking light (beacon detachable) 2 pairs of warning signs, double LED-illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/aluminium chequer plate covering followed by 70 mm softwood floor, with steel/aluminium chequer plate over wheel wells Rear incline with 70 mm softwood floor Access ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable with timber surfacing Hydraulic, powered via tractor PTO with flow restrictor, controlled laterally front left Hydraulic connection with SVK plug NW 10/3, including connecting hose Approval country / Plates Approval country: Germany 24/7 service hotline Prepared for two-line number plate holder Contour marking with reflective tape as per ECE R 048, side white and rear red Warning sign according to ECE - 70 Paintwork Frame hot-dip galvanized including passivation, 15 years corrosion perforation warranty Drawbar galvanized or black, as per manufacturer’s choice Access ramps hot-dip galvanized Note: Images are for illustrative purposes (archive images)!

Koşul: yeni, makine/araç numarası: 207ad28f83705ed0d38a4f174, boş ağırlık: 3 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 14 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5, Further information Chassis Swap Central Axle Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers for 20-foot swap bodies, suitable for swap bodies 7.15 and 7.45 rear-flush (for 7.15 swap bodies, not rear-flush; forklift pockets/frame protrudes) Telescopic support leg at the front 1 pair of gearbox support feet at the front, with straight lower part and single-sided operation on the right (FR) Wheel chocks with holder Aluminium side underrun protection Steel rear underrun guard Half-shell mudguards Mounting for truck-mounted forklift at the rear, incl. 2 fork insertion pockets, 2 extendable support tubes, bracket for chain securing with locking pin. Rear underrun guard with light unit can be folded away. Includes 2 loose rubber pads to protect the rear panel; we recommend counterweight! Note: Partially low ground clearance with forklift, poor trailing behaviour possible, no guarantee! (Forklift self-weight up to max. 1,500 kg for trailers.) (With proximity switch for forklift control in conjunction with lift axle) The forklift mounting shifts the axles rearwards, pay attention to load distribution when driving without a forklift. Customer risk! (For swap body trailers, driving with forklift is only permitted in conjunction with a swap body.) Forklift mount adapted as per AU 203670 for 7.45m swap bodies Counterweight at the front between the frames, approx. 300 kg, if required, exact check still pending Drawbar equipment for central axle trailers Drawbar with approved 50 mm towing eye, forwarding edition (not suitable for trucks with tail lift, exact check still required when ordering) Undercoupler drawbar Drawbar without length adjustment Axles + Suspension SAF drum brake axles as per manufacturer's choice Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, colour-coded line routing for easier service Spring-loaded parking brake Duomatic connection at front, with connecting line to the tractor, on the left (FR) Duomatic connection at front, with connecting line to the tractor, connection on the right (FR) EBS, Electronic Braking System with EBS plug at the front, with connection cable, on the left (FR) Attention: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift & lower valve, holding function in each lift/lower position Vehicle - Drive stability system Wheels and Tyres 235/75 R17.5, brand as per manufacturer's choice Steel twin wheels, factory silver Electrics 24 Volt, 4 x 3-chamber tail lamps + 1 round reversing lamp + 1 round rear fog lamp, side yellow LED lighting, lights mounted protected! 2 white position lamps at the front Pjdei Ri Iaopfx Al Ijpt 2 white/red lane marking lamps at the rear 1 x 15-pin connector at the front, with connecting cable, on the left (FR) 2 x 7-pin sockets at the rear left (FR) for truck-mounted forklift 1 x 15-pin socket at the rear left (FR) for truck-mounted forklift LED work lights on both sides behind the 2nd axle (switched via reverse light) Additional LED work light at rear, switched via reverse light Approval / Plates Germany With Dekra inspection and certificate (as per §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour markings with reflective tape as per ECE R 048, white on the sides and red at the rear Painting Frame DB

Koşul: yeni, makine/araç numarası: 06017a31026c05fc8f6ccf5ae, boş ağırlık: 3.055 kg, azami yük ağırlığı: 14.945 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5, Further information Chassis: Swappable rotating dolly Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers on 20-ft base for swap bodies 7.15 and 7.45 Rotating dolly with heavy-duty ball bearing turntable 2 wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter mudguards at the front and half-mudguards at the rear Drawbar device for dolly trailers Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Laser-measured axles/chassis for reduced tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, color-coded line routing for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front, with connecting lines to the motor vehicle EBS, Electronic Braking System with EBS plug in front with connecting cable Note: The trailer may only be towed by towing vehicles that can ensure effective ABS operation! With raise & lower valve, holding function in both lower and raised positions Wheels and tires 235/75 R17.5 tires, brand at manufacturer's discretion Steel twin wheels, factory silver Electrics 24 volt, multi-chamber LED lights with resistor, yellow LED side marker lights, LED number plate light (Note: Certain towing vehicles may trigger false diagnostics despite proper functioning) 2 white front position lights in LED 2 white/red lane marker lights at rear in LED 1 x 15-pin plug at front with connecting cable Additional LED work light at the rear, switched via reverse light Approval / Plates Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Ppodpfxei Ri Rce Al Iot Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau Note: Archive images!

Koşul: yeni, makine/araç numarası: ede0610378cbe39cc4883251d, boş ağırlık: 24.000 kg, azami yük ağırlığı: 7.550 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction 1st pair of wheel recesses integrated into the steel platform in the driving aisle area, tapered for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! The frame is 400 mm higher than the wheel recess in the main beam area. Ppjdsi Ri Ryepfx Al Ist If machines are to be transported and the total height needs to be checked, we kindly request the technical datasheet of the machine types with exact specifications (if total height is exceeded -> customer risk, approval required). Depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer. Turntable with heavy-duty ball bearing slewing ring, toolbox integrated into the turntable front section Rear support foldable 2 wheel chocks with holders Side underrun protection in aluminium Rear mudflaps across the full width Extendable widening to 3,000 mm (not in rear bevel area) (The track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 3 pairs of lashing points integrated into the front floor, each 10 t Incl. 6 pairs of lashing mushrooms recessed in the upper and side external frame, each 10 t 1 x in the gooseneck area The rest distributed in between, distance not greater than 1200 mm 1 x rear bevel 5 pairs of stake pockets recessed into the external frame, inside 70 x 40 mm (convertible to 5 t ring lashing points, not included) Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension SAF drum brake axles Axle/undercarriage laser measured for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Brake System 2-line compressed air brake system Colour-coded piping for easy servicing Spring-actuated parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the truck ABS and ALB, with ABS socket at the front, including connection cable Attention: The trailer may only be towed by vehicles that ensure the effective operation of the ABS! Wheels and Tyres 235 / 75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red rear marker lights 2 x 7-pin non-interchangeable plugs at the front, with connection cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, incl. followed by 70 mm softwood floor, wheel arch areas with steel/checkered plate covering Rear bevel with 70 mm softwood floor Low loader platform incl. rear bevel 8,200 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring lift assistance Operating Instructions With 10,000 kg axle load an exemption permit is required, only indivisible loads possible!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and fifth wheel loads (Poor driving and trailing behaviour possible due to incorrect load distribution) Country of Approval / Plates Country of approval: Germany Incl. with Dekra approval and certificate (acco

Koşul: yeni, makine/araç numarası: c13a96854ea37997845c1bf36, boş ağırlık: 6.860 kg, azami yük ağırlığı: 28.140 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235/75 17,5,

Koşul: yeni, makine/araç numarası: d24246f092ae53c0e155d19dd, boş ağırlık: 2.400 kg, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 16.000 kg, Further information Chassis tandem trailer Steel welded construction with approx. 152 mm high floor section; load-oriented and torsion-resistant steel frame structure. Longitudinal floor beams with a load-resistant outer frame and a guide tunnel every 600 mm, tunnel with positioning aids at the top and sides; tunnel height approx. 45 mm. 4 interchangeable container corner fittings on 20ft basis. 4 jack legs for jumbo parking height 970 mm, extendable and foldable sideways by 90°, with short safety strut and securing mechanism, pin lock on the frame, sturdy spring bolt as additional transport lock, symmetrical arrangement of legs Form A 2 for CWB C 745 / 782, suitable for parking height approx. 970 mm. Reinforcement between support legs. 7 pairs of lashing rings recessed in the outer frame, each rated at 2.5 t. Heavy-duty pallet stops on both sides, approx. 20–25 mm high, lashing option every 200 mm, loading height reduced by approx. 20–25 mm. Side-mounted door retainers. Rear underrun protection made of flat steel. Flooring Phenolic resin-coated plywood panels, approx. 27 or 30 mm thick (manufacturer's choice), designed for high point load capacity, suitable for forklift axle loads up to max. 4,400 kg. Front bulkhead/corner posts 2,800 mm high, remaining section covered with tarpaulin; volume-optimized steel corner posts; quick-release device for side curtain at front bulkhead. Central stanchions 1 pair of sliding stanchions, adjustable along the full length, with four pockets for insert slats and long lower pocket. Insert slats 3 rows of aluminum V-insert slats or wooden insert slats as per manufacturer, plus 1 additional row of aluminum V-insert slats. Rear wall/corner posts rear Rear steel corner posts up to underside of roof, curtain suspension with round tube and tensioning ratchet. Rear portal doors, double-wing, each with 2 internal locking rods. Curtain Tarpaulin with welded-in horizontal and vertical tension belts. Tension locks in stainless steel. Roof Sliding roof; rear Endlift, can be folded up high at the back, roof slides from rear to front; L-roof beam designed for the automotive industry; internal width between roof beams approx. 2,490 mm, curtain color: white. EcoLift – lifting roof, can be raised by approx. 380 mm, gas-strut assisted. Approval / Plates Country of registration: Germany. Manufacturer's certificate according to EN 12642 XL. Paintwork Chassis hot-dip galvanized. Front corner posts hot-dip galvanized. Front wall aluminum. Ppsdpfx Aekt Ni Uel Iot Rear corner posts hot-dip galvanized. Rear wall white. Tarpaulin RAL 9005 jet black with advertising lettering. Attention! These are archive images.

Koşul: yeni, makine/araç numarası: b50cac2c60a813b0968994fa0, boş ağırlık: 5.700 kg, azami yük ağırlığı: 18.300 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer - Steel welded construction - Turntable with robust ball-bearing slewing ring - Foldable rear support - 2 wheel chocks with holders - Full-width rear mudguards - Prepared for extension to 3,000 mm (holes in the outer frame, not in the rear bevel) Lashing Points Low-bed - 1 pair of lashing cutouts recessed at the front in the longitudinal beam at the gooseneck, each rated for 10t - 7 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated for 10t - 1x at the front on the gooseneck - 5x in the low-bed area - 1x in the rear bevel - 12 pairs of lashing holes in the outer frame, each rated for 5t (for tensioning strap hooks) - 5x gooseneck, 6x low-bed, 1x rear bevel Drawbar Hitch Turntable Trailer - Drawbar with tested 40 mm towing eye Axles & Suspension - Drum brake axles, manufacturer’s choice - Laser-aligned axles/chassis to reduce tire wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance) Wheels and Tires - 235 / 75 R 17.5 Fulda - Steel twin wheels, factory silver Brake System - 2-line compressed air brake system - Spring-loaded parking brake - 2 confusion-proof coupling heads at the front, connection lines to tractor vehicle - Connection lines approx. 60 cm extended - Without ABS, but with mechanical ALB, max. 60 km/h permissible Electrics - 12 volts, multi-chamber lights, no side yellow LED lights, side reflectors - 2 white position lights front - 2 white/red lane marker lights rear - 1x 7-pole 12-volt plug at the front, with connection cable, extended by approx. 60 cm - 1 LED beacon with bracket, switched via parking light (removable beacon) - 2 pairs of illuminated, extendable warning boards up to 3,000 mm Floor - Gooseneck front with steel / checker plate covering - Toolbox recessed into drive-over slope at gooseneck - Then 70 mm softwood floor, with steel / checker plate covering in wheel arch area - Rear bevel with 70 mm softwood floor - Low-bed platform including rear bevel: 5,900 mm Loading Ramps - Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable - Wood covered - Supported by spring assist Pjdpfoi Ri Agox Al Iopt Operating Instructions - For 10,000 kg axle load, a special permit is required; only indivisible loads permitted! - The specified total weight is technically possible; depending on the load, the permissible axle/support/saddle loads may not be achieved (poor tracking and maneuverability possible due to improper load distribution) Country of Registration/Plates - Country of registration: Germany - With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (for Switzerland, max. 40 km/h possible) - Prepared for two-line license plate holder - No ECE R 048 compliant contour marking / reflective strips Paintwork - Frame: DB 7350 Novagrau - 10-year warranty against rust-through - Drawbar galvanized or black, manufacturer’s choice - Loading ramps hot-dip galvanized Note: Archive images!

Koşul: yeni, makine/araç numarası: 15431365fe5515297a6a9fb05, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty slewing ring Foldable rear supports 2 wheel chocks with holders Aluminum side underrun protection Full-width rear mudflap Half-shell mudguards for 1st and 2nd axles with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind the 3rd and 4th axles Digger arm recess above the rear axles, extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep; 2 pairs of lashing holes (5 t each) in the digger arm recess, laterally on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear incline 1 plastic toolbox with shelf insert, W=620/H=360/D=440 mm, lockable with a padlock (padlock not included) 1 storage box recessed into neck section in the floor, with lid, W=720 mm / L=520 mm / D=170 mm Extendable widenings to 3,000 mm 70 mm wooden planks for widening to 3,000 mm Storage compartment for wooden planks under the loading area Low-bed trailer lashing points (40 lashing options) 1 pair of 5 t lashing eyes on gooseneck 9 pairs of 10 t lashing pins, recessed into the top and side of the external frame 2 x on the front gooseneck 7 x in the low-bed area 6 pairs of 5 t lashing holes in the external frame of the low-bed (for hook-in tie-down straps) 3 additional pairs of foldable lashing eyes, each 10 t 1 x inside next to the main frame at the start of the low-bed 1 x on the gooseneck (overhanging) 1 x recessed in the floor behind the last axle Trailer drawbar Towing bar with tested 50 mm towing eye, 8° inclined towing eye, D-value at least 160 kN Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization front and rear (rocker compensation) Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin wheel configuration, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to towing vehicle ABS and ALB, with ABS socket at the front, with connecting cable Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red tracking lights at the rear Podpfx Alsi Ri A Sj Iept 2 x 7-pin non-interchangeable plugs at the front, with connecting cable 1 LED beacon with holder, operated via parking lights (removable beacon) 2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm Floor Front gooseneck section with steel/chequer plate covering Proceeding with 70 mm softwood flooring, steel/chequer plate covering in the wheel arch area Rear incline with 70 mm softwood flooring Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lift assistance Registration/country plates Country of registration: Germany 24/7-Service Hotline Prepared for two-line license plate holder Conspicuity markings with reflective strips according to ECE R 048, side white and rear red Warning panel according to ECE - 70 Paintwork Frame hot-dip galvanized incl. passivation—15-year corrosion warranty Towing bar galvanized or black, at manufacturer’s option Ramps hot-dip galvanized Note: These are archive photos!

Koşul: yeni, makine/araç numarası: d461243f559015adca5bb372c, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis for Low-Loader Trailer Steel welded construction Turntable bogie with heavy-duty slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear spray flap Half-shell fenders on 1st axle with anti-spray flaps Additional anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox, with tray, width = 620 mm, height = 360 mm, depth = 440 mm, lockable with padlock Extendable width up to 3,000 mm Central storage compartment for wooden planks in the loading area 70 mm wooden planks for extension to 3,000 mm Lashing rings for low-loader (40 securing points) 1 pair of lashing cutouts indented in the front longitudinal beam (cranked zone), each rated for 10 t 4 pairs of lashing holes in the outer frame, each rated for 5 t (for tensioning straps) 7 pairs of lashing pins recessed in the top and side of the outer frame, each rated for 10 t 1 x at the front on the cranked zone 6 x in the low-bed Psdpji Ri Dlsfx Al Ijpt First lashing ring 250 mm from front and last one max. 250 mm from rear; spacing between lashing rings not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm, convertible to 5 t ring lashing eyes 2 additional pairs of folding lashing rings, each rated for 10 t 1 x on the cranked zone (protruding) 1 x recessed in the floor behind the last axle Drawbar / Turntable coupling Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker balance) Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 anti-swap coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front, including connecting cable Make: Wabco, Knorr or Haldex Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin anti-swap plugs at the front, with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning panels, LED illuminated and extendable to 3,000 mm Floor Front cranked section with steel / tread plate surface Storage box recessed in the ramp transition to cranked section Followed by 70 mm softwood floor, in wheel arch area with steel / tread plate surface Rear bevel with 70 mm softwood floor Low-loader area incl. rear bevel: 6,500 mm Loading Ramps Steel ramps, 2,800 mm length, 750 mm width, laterally adjustable Wooden inlay Hydraulically operated via tractor auxiliary drive with restrictor, operation on left side, FR Hydraulic connection with SVK coupling NW 10/3, including connecting hose Registration / Plates Country of registration: Germany 24/7 Service Hotline Prepared for two-line plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Warning panel according to ECE - 70 Paintwork Frame hot-dip galvanized including passivation 15-year warranty against rust-through Drawbar galvanized or black, manufacturer’s choice Ramps hot-dip galvanized Note! These are archive images!

Koşul: yeni, makine/araç numarası: a0a72d14f9b44bce47bc25ffb, dingil konfigürasyonu: 1 dingil, lastik boyutu: 11,5/80-15,3 alliance, Further information: 40mm towing eye Ppodpfsi Ri D Tsx Al Iot Support leg with wheel Tyres: 11.5/80-15.3 Alliance Without suspension Towing eye to centre of fifth wheel: 3,200 mm Tyre load capacity: 5,800 kg at 30 km/h + 5,150 kg at 40 km/h No road approval, for internal use only!

Koşul: yeni, makine/araç numarası: dd98a7658922be8f2e25bcadb, boş ağırlık: 2 kg, azami yük ağırlığı: 8 kg, toplam ağırlık: 10 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r 17,5, Further Information Chassis Central Axle Low Loader Trailer Fine-grain steel welded construction Telescopic support leg at the front Telescopic rear support 2 wheel chocks with holders Steel fenders over both wheels Central axle trailer coupling system Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Ppodpfx Alei Ri Ebo Iot Axles & Suspension Euro-axles of our choice, with tapered roller bearings and S-cam brakes Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and Tires 235 / 75 R 17.5 as per manufacturer's selection Steel rims in factory silver Braking System Dual-circuit compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to towing vehicle ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that can ensure the functionality of the ABS! Electrics 24 Volt, multi-chamber lights, side yellow LED marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin, non-interchangeable connectors at the front, with connecting cable Platform TTS Low-profile steel trough, platform floor with steel/chequer plate covering, steel walls solidly welded to the floor Platform length 4500 mm Trough front and sides with load-lock profile for lashing strap attachment (8 points at the front, 12 per side) Note: Slight floor waviness due to welding distortion possible! 2 pairs of lashing rings, 1 pair at the front corners of the steel trough, 1 pair at the rear in the floor, each rated to 5 tons 2 additional pairs of lashing rings in the floor, each rated to 5 tons Loading Ramps Steel ramps, 2300 mm long, 510 mm wide, laterally adjustable with handle on the ramps Wooden surfaces Gas spring assist for single-person operation Operating Instructions The specified total weight is technically feasible; depending on the load, the total weight may not be achievable while observing permitted axle, support, and kingpin loads. (Poor driving and tracking behavior possible due to improper load distribution) Country of Registration/Plates Country of registration: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white at the sides and red at the rear Paintwork Frame RAL 3002 Carmine Red Loading ramps hot-dip galvanized Note: Archive images!

Koşul: yeni, makine/araç numarası: a3b1347da4aa7f31dceb875db, boş ağırlık: 2 kg, azami yük ağırlığı: 9 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Central axle trailer Fine-grain steel welded construction 6 pairs of lashing eyes bolted to the floor/outer frame, each rated for 5 tons Gear support leg at front Foldable rear support 2 wheel chocks with holders Steel underrun protection Full-width rear spray flaps Quarter-shell mudguards Central axle trailer drawbar Drawbar with certified 40 mm draw eye Drawbar height adjustable by spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance) Wheels and Tires 235/75 R 17.5 Manufacturer's choice Steel rims, factory silver Brake System 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at front with connections to the towing vehicle ABS and ALB, with ABS connector at front, incl. connection cable Attention: The trailer may only be towed by traction vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, side LED marker lights (amber) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connecting cables Floor Steel / checker plate for high point load capacity Note: Slight floor warping possible due to welding distortion! Platform length approx. 5,200 mm Rear taper approx. 900 mm Front wall / corner stanchions 25 mm aluminium hollow section, 320 mm high Side walls 25 mm aluminium hollow section, 320 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions fixed to the frame with bracket for securing the loading ramps, drive-on width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with carry handles Wooden surface With gas strut for one-man operation Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable due to permitted axle, support, and kingpin loads (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany With Dekra inspection and appraisal (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, side white and rear red Paintwork Frame DB 7350 Novagrau 10-year warranty against rust-through Ppedji Ri Ilopfx Al Iet Front wall aluminium Sidewalls aluminium, anodised Loading ramps hot-dip galvanised Note: Archive images!

Koşul: yeni, makine/araç numarası: c1946328bb4efe26fccb128ee, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 385 / 55 r 22,5, Further information Chassis, Turntable Trailer, Waste Disposal Fine-grain steel welded construction 2 longitudinal beams with cross members, upper side of the longitudinal beams designed as a container roller track in wear-resistant version, rear-loadable, with run-up ramp. Suitable for roll-off containers with 6.5/7.0 m length. Container locking: - 2 pairs of locking hooks recessed into the floor - Pneumatic actuation The container locking system is an internal 2-point design and does not allow locking of roll-off containers with internal web (intended for transport of roll-off containers with subframe according to DIN 30722). Turntable with heavy-duty ball-type slewing ring Wheel chocks with holders Side underrun protection made of aluminum Rear underrun protection made of steel Half-shell mudguards Drawbar system, turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension SAF disc brake axles with 430 mm brake disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Ppsdpfx Aei Ri Nmel Iot Wheels and Tires 385/55 R 22.5 Manufacturer’s choice Steel rims in factory silver Brake system 2-line compressed air braking system Spring-actuated parking brake Immobilizer: with open container locking, the spring-actuated parking brake is activated Vehicle stability control system 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle EBS, electronic braking system with EBS connector at front, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Lift and lower valve Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable connectors at front, with connecting cable Registration/Country plates Country of registration: Germany With Dekra approval and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame: DB 7350 Novagrau, 10-year warranty against rust-through Drawbar: KTL black Attention: Archive images!

Koşul: yeni, makine/araç numarası: b6e633155abf971a017e4b53b, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 385 / 55 r 22,5, Further information Chassis turntable trailer waste disposal Fine-grained steel welded construction Slide: Container is placed onto the slide from the rear and pushed forward, front container stop adjustable for 6.0 / 6.5 and 7.0 m roll-off containers with external rollers Container locking: - 2 pairs of locking hooks recessed in the floor - Pneumatic operation. The container locking is of an internally acting 2-point design, making it impossible to lock roll-off containers with internal sills. Turntable with heavy-duty slewing ring Wheel chocks with holder Aluminium side underrun protection Steel underrun protection Half-shell mudguards Vertical rear collision protection left and right, with delta rubber on underrun protection holder Ppedpfxji Ri Nqe Al Ijt Drawbar for turntable trailer Drawbar with tested 40 mm towing eye Axles + Suspension SAF disc-braked axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension with raise & lower valve Wheels and Tires 385 / 55 R 22.5 Manufacturer's choice Steel rims, factory silver Braking system 2-line air pressure braking system Spring-actuated parking brake Immobilizer: With open container locking, the spring-actuated parking brake is activated Vehicle stability control system 2 non-interchangeable coupling heads at the front, with linkage to towing vehicle, EBS, electronic braking system with EBS connector at the front, with linking cable Attention: The trailer may only be towed by vehicles that can guarantee efficient ABS operation! Electrics 24 volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 1 additional LED work light at the rear, switched via reverse gear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable Approval / Plates Country of registration: Germany With Dekra inspection and certification (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Paintwork Frame DB 7350 Novagrau Drawbar KTL black Note: Archive images!

Koşul: yeni, makine/araç numarası: e8628b18bda6db44719c946e0, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 385/65 r22.5, Further information Chassis swap turntable Fine grain steel welded construction Fliegl V-Stream frame Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with robust struts on 20' base for swap bodies 7.15 and 7.45 Turntable with heavy-duty ball bearing slewing ring 2 wheel chocks with holder Side underrun protection, aluminium Side underrun protection inset for optimal clearance to swap body supports Rear underrun protection, steel Rear underrun protection shortened for optimal clearance to swap body supports, lighting system mounted in protected position Half-shell mudguards Drawbar assembly trailer turntable Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring Axles & Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air brake system, color-coded line routing for easy servicing Air reservoir 208 liters Spring-actuated parking brake 2 fail-safe coupling heads at front with connecting lines to towing vehicle EBS, Electronic Braking System with EBS plug at front and connection cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve, hold function in drop/raise position Wheels and tires Podpji Rivlsfx Al Iept 385/65 R22.5, make according to manufacturer's choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marking lights at rear 2 x 7-pin, fail-safe plugs at front, with connection cable 2 additional LED work lights at the rear, switched via reverse light 1 LED work light at the front, centrally mounted between supports, shining to the rear, switched via reverse light Registration/country plates Germany With Dekra inspection and certificate (per §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Painting Frame DB 7350 Nova grey, 10 years warranty against rust-through Attention! These are archive images!

Koşul: yeni, makine/araç numarası: f044065451f6d849ee7a5b9f8, boş ağırlık: 5 kg, azami yük ağırlığı: 29 kg, toplam ağırlık: 35 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385 / 65 r 22,5, Further Information Chassis for Semitrailer, Freight Forwarder Specification Reinforced steel welded construction, only 2 longitudinal beams as double-T profiles with steel/chequer plate in between the beams, fifth wheel plate with replaceable 2'' kingpin. Protective cover for tail lights. 1 steel toolbox recessed between the longitudinal beams 8 pairs of lashing rings, bolted or welded to the frame as per manufacturer's choice 24 t 2-speed landing gear, single-sided operation, with straight base, without sliding compensation 2 wheel chocks with holders Aluminum side underrun protection Galvanized steel rear underrun protection Half shell mudguards With anti-spray flaps compliant with EU regulations 1 spare wheel holder for 1 spare wheel, including wheel fastening kit 8 timber post cradles as per manufacturer's specification, bolted to the frame, each with 2 telescopic wooden stakes extendable from 1,800 to 2,800 mm, 7 t per pair. Axles & Suspension SAF disc brake axles with 430 mm disc diameter Air suspension with raise & lower valve, safety cable on axles 1st axle automatic lift axle, including forced lowering and start assist, operated via 3x braking (start assist functions up to 30% axle load exceedance and up to a max speed of 25 km/h) Axle spacing offset (Combined Transport) up to 44 t gross combination weight Wheels and Tyres 385 / 65 R 22.5 Manufacturer’s choice Steel rims, factory silver Braking System Dual-line air pressure brake system Ppodpfxsi Rivws Al Ist Spring-loaded parking brake Axle load detection via EBS-Canbus signal, for display in the driver’s cab; truck must be pre-equipped accordingly, not installed on truck (not an approved scale) 2 fail-safe coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at the front, without connector cable Attention: This trailer may only be towed by tractors that guarantee correct ABS performance! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at front, without connector cable Front Bulkhead/Corner Posts Steel/mesh front bulkhead, approx. 2,300 mm high, bolted to the frame Approval / Plates Country of Registration: Germany Approval as per EC 2007/46 Prepared for single-line number plate holder Contour marking with reflective tape as per ECE R 048, white on sides and red at rear Paintwork Frame DB 7350 Novagrau Landing legs coated black Bulkhead hot-dip galvanized Note: Archive images!

Koşul: yeni, makine/araç numarası: d7a33d709a92cd60f18d010e8, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 385/65 r22.5, Further information Chassis Central Axle Swap Body Trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with robust outriggers based on 20-ft configuration for swap bodies 7.15 and 7.45 1 pair of landing gears at the front, with straight lower section and single-side operation on the right (FR) 2 wheel chocks with holders Aluminum side underrun protection Side underrun protection set inward for optimum clearance around swap body supports Steel rear underrun protection Psdpfxoi Riwbj Al Iopt Half-shell mudguards Splash flaps Central axle trailer coupling equipment Drawbar with tested 50 mm towing eye, freight carrier version (not suitable for trucks with tail lifts, exact checking required for specific orders) Axles & Suspension SAF disc brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system, color-coded lines for easy service Air reservoir 208 liters Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, connection on right side (FR) EBS, Electronic Braking System with EBS connector at the front, with connection cable, connection on right side (FR) Attention: The trailer may only be towed by vehicles that ensure effective ABS operation! With lift & lower valve, hold function in both lifted and lowered positions Wheels and Tires 385/65 R22.5—Brand: Athos Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin connector at the front, with connection cable, connection on right side (FR) 2 additional LED work lights recessed into the rear, controlled via reverse gear 1 LED work light centrally mounted at the front between braces, rear-facing, controlled via reverse gear Operating Notes The specified gross weight is technically possible; depending on the cargo, the gross weight may not be achievable within the permissible axle, support, and fifth-wheel loads. (Poor driving and trailing behavior can result from incorrect load distribution.) Country of Approval / Plates Germany With Dekra inspection and certificate (according to §13 EC FGV) 24/7 service hotline Prepared for single-line license plate holder Outline marking with ECE R 048-compliant reflective tape, white on the sides and red at the rear Paintwork Frame painted DB 7350 Novagrau 10-year anti-corrosion warranty Note: Archive images!

Koşul: yeni, makine/araç numarası: bdf30cb8a53c70e900bdb40a7, boş ağırlık: 2 kg, azami yük ağırlığı: 9 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: -, Further Information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing support Gear support leg at the front 2 wheel chocks with holder Steel underrun protection Full-width rear mudflap Quarter-shell mudguards Lockable storage compartment for loading ramps beneath the loading platform Central axle trailer towing device Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + Suspension BPW drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load balance (rocker balance) Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims factory silver Braking System 2-line air brake system, colored lines for easy servicing. Manual spindle parking brake Integrated air reservoir ABS and ALB, with ABS plug at the front and connection cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! 2 foolproof coupling heads at the front, with connection lines to the truck Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin foolproof plugs at the front, with connection cable Hydraulics Three-way tipper system, hydraulic multi-piston ram with lift limiter and safety cable Low-pressure cylinder up to max. 170 bar, no restrictor. If needed, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Operation hydraulically via truck PTO Tipping Platform Sturdy tipping platform with 4 mm steel floor, steel side walls, continuous side panels, drop-down and pendulum-mounted with central locking at the bottom. Removable rear corner posts. Rear wall drop-down and pendulum-mounted, with central locking at the bottom. Platform length approx. 4,500 mm, sidewalls with 5 hinges at the bottom. Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated 5 tons Operating Instructions The stated total weight is technically feasible; depending on the load, the total weight may not be achievable while observing permissible axle, support, and saddle loads. (Poor handling and tracking may result from incorrect load distribution) Registration/Country of Origin/Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Conspicuity marking with reflective strips according to ECE R 048, white on sides and red at the rear Paintwork Pedoi Riwiopfx Al Ijpt Frame hot-dip galvanized including passivation 15-year warranty against rust-through Sidewall/platform RAL 3002 Carmine Red Rear support, loading ramps, and toolbox optionally available at an extra charge Note: Archive images

Koşul: yeni, makine/araç numarası: 628cde0fe99cc2d3c8eaa8dd8, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Lowbed trailer chassis Steel welded construction Turntable with robust ball bearing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width rear splash guards Half-shell fenders on axle 1 with anti-spray mudflaps, anti-spray mudflaps behind axles 2 and 3 1 plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with a padlock (padlock not included) Extendable widenings up to 3,000 mm Storage compartment for timber planks in the center of the loading area 70 mm timber planks for extension to 3,000 mm Lashing eyes for low loader (40 lashing points) 1 pair of lashing cutouts in the front longitudinal beam, recessed in the cranked area, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching lashing straps) 7 pairs of recessed lashing mushrooms on top and side of outer frame, each 10 t 1 front cranked area 6 in the lowbed deck First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 2 pairs of additional folding lashing eyes, each 10 t 1 located in the cranked area (protruding) 1 recessed in the floor behind the last axle Towing equipment for turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles (manufacturer’s choice) Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and tires 235 / 75 R 17.5 (manufacturer’s choice) Steel rims, dual configuration, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads front, with connecting lines to the tractor unit, ABS and ALB, with ABS plug front, with connection cable Brand: Wabco or Knorr Ppodpfx Aoi Ri Ddsl Iot Electric system 24 volt, multi-chamber lights, yellow LED side marker lights 2 white front position lights 2 white/red lane marker lights rear 2 x 7-pin non-interchangeable plugs at front, with connecting cable 1 LED rotating beacon light with bracket, switched via parking light (removable lamp) 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm Floor Front crank area with steel / chequer plate covering Toolbox recessed in the ramp bevel to the crank Then 70 mm softwood floor, steel / chequer plate covering in wheel arch area Rear ramp bevel with 70 mm softwood floor Lowbed loading area incl. rear ramp bevel: 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-covered With spring assist Country of approval / Number plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning board according to ECE-70 Painting Frame hot-dip galvanized incl. passivation 15-year warranty against corrosion Drawbar galvanized or black, as per manufacturer’s choice Loading ramps hot-dip galvanized Attention! These are archive images!

Koşul: yeni, makine/araç numarası: 55d3c5c03e032385649769b1b, boş ağırlık: 9.900 kg, azami yük ağırlığı: 14.100 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty slewing ring, integrated storage box included. Turntable drawbar Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Extendable widening to 3,000 mm (not at rear chamfer) (Note: The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central wooden plank storage compartment 70 mm wooden planks for widening to 3,000 mm Low loader lashing rings 3 pairs of lashing points rated 10 tonnes each, integrated at the front 6 pairs of lashing mushrooms, recessed in the upper and side outer frame, each rated at 10 tonnes 1 x in the neck area The remaining pairs are spaced at intervals no greater than 1,200 mm 1 x at the rear chamfer 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Turntable trailer drawbar system Drawbar with certified 40 mm towing eye Note! With 40 mm towing eye, the permissible total weight of the truck must not exceed 18,000 kg; otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Laser-measured axles/chassis for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation at front and rear (rocker compensation) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin configuration, factory silver Braking System 2-line pneumatic brake system Pjdpfx Alsi Ri I Ej Iept Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at front and connection cable Note: The trailer may only be towed by vehicles capable of ensuring effective ABS operation! Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable connectors at front, with connecting cable 1 LED beacon with bracket, operated via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Steel floor at front Followed by 70 mm softwood floor, steel/chequer plate in wheel arch area Rear chamfer with 70 mm softwood floor Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-decked With spring-assisted support Operating Instructions An exemption permit is required for a 10,000 kg axle load, only indivisible loads permitted! The stated total weight is technically feasible; depending on the load, the total weight may not be achieved while adhering to the permitted axle, support, and kingpin loads. (Poor handling and tracking may result from incorrect load distribution) Registration/Country Signs Country of registration: Germany 1 with Dekra inspection and report (according to §13 EC - FGV) 24/7 Service Hotline Prepared for two-line licence plate holder Contour markings with reflective strips to ECE R 048, white on sides and red at rear Paintwork Frame RAL 3002 Carmine Red 10-year anti-perforation warranty Drawbar, galvanised or black, as per manufacturer specification Access ramps hot-dip galvanised Note: Archive photos!

Koşul: yeni, makine/araç numarası: 8df1ead53cc82aeb51e50a37d, boş ağırlık: 4 kg, azami yük ağırlığı: 13.880 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Turntable Skip Loader Fine-grain steel welded construction Container locking system: - 2 pairs of locking hooks recessed into the floor - Pneumatic operation The container locking system is designed as an internal 2-point mechanism; locking of skip containers with internal bars is not possible (designed for the transport of roll-off containers with subframes according to DIN 30722). Ppjdpfx Alji Ri Nuo Iot Note! At the start of the roller trough at the front, the container must be pushed on completely flat! Longitudinal guide rails, laterally adjustable and removable, rails approx. 115 mm high Turntable with heavy-duty ball bearing slewing ring 8 pairs of lashing mushrooms recessed into the upper and side parts of the outer frame, each rated at 5 t 7 pairs of stake pockets recessed into the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t lashing rings, not included) 2 wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Quarter section mudguards according to EC standards With anti-spray mudflaps to EC Directive Drawbar arrangement for turntable trailers Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and Tires 235 / 75 R 17.5 Manufacturer’s choice Steel wheels in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 interchangeable coupling heads at front, with connecting lines to towing vehicle, ABS and ALB, with ABS socket at front, with connection cable Attention: The trailer may only be towed by tractors that ensure proper ABS function! Electrics 24 Volt, multi-chamber tail lights, yellow LED side marker lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin interchangeable plugs at front, with connecting cable Floor Steel floor Container roller trough at front, recessed in floor, for roll-off containers 5,000 – 7,000 mm length Note: Minor floor deformation due to welding distortion possible! Loading ramps Lockable storage space for loading ramps beneath bed Operating instructions For 10,000 kg axle loads, a special permit is required. The permit must be applied for separately in each federal state; there is no guarantee from the legislator for 20 t permissible total weight. Customer’s risk. The specified total weight is technically possible; depending on the type of load, the permissible total weight may not be achievable while adhering to axle/support and kingpin loads (impaired driving and tracking possible from poor load distribution). Country of registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 Service Hotline Prepared for one-line number plate holder Contour marking with reflective tape to ECE R 048, white lateral and red rear Warning panel according to ECE-70 Paintwork Frame DB 7350 Nova Grey 15-year warranty against rust-through Note: Floor deformation from hot-dip galvanization possible! Drawbar KTL black Important: Archive photos!

Koşul: yeni, makine/araç numarası: 6d88bda3a1ee2464a81b34f36, boş ağırlık: 4 kg, azami yük ağırlığı: 13 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction, with slight central pre-camber, turntable with heavy-duty slewing ring, wheel chocks with holder, quarter-circle mudguards in front of and behind each axle. Lashing Eyes for Low-Bed Over front axle: 2 pairs of ring lashing eyes at 5t each, front at the gooseneck Low-bed: 4 pairs of lashing eyes, side-mounted in the low-bed at 6t each 5 pairs of lashing eyes at 5t between the longitudinal beams Drawbar / Turntable Trailer Coupling Drawbar with certified 40 mm towing eye, mechanically length-adjustable and lockable in 6 x 100 mm steps (Drawbar length 1,700 - 2,300 mm) Axles & Suspension BPW drum brake axles with 10t axle load each, automatic slack adjusters. Axle endurance braking test rated up to 105 km/h, rear axle manually removable. To remove: release air locking and lower the rear to the ground. Then disconnect the hoses at the rear module, insert the transport bar into one of the rear bushings, and, by gently pressing down and simultaneously pulling back, uncouple the rear (parking brake released). After loading or unloading, move the rear module into place and connect up to the marking. Then raise to driving height and reconnect hoses. Confirm bolt locking (visual check to ensure bolt locks) and test rear functionality. Air suspension with raise/lower valve Pedpfoi Ri N Aex Al Ijpt Wheels and Tyres 235 / 75 R 17.5, from leading brands, steel rims in twin arrangement, factory silver finish Braking System 2-line air brake system, spring-loaded parking brake, 2 fail-safe coupling heads front, with connecting lines to tractor unit, EBS (Electronic Braking System) with EBS plug front, incl. connection cable. Attention: This trailer may only be towed by tractor vehicles capable of guaranteeing effective ABS operation! Electrics 24-volt system, multi-chamber lights, yellow side LED lighting, 2 white position lights front, 2 white/red lane marker lamps rear, rotating beacon with holder, operated via parking light circuit (beacon removable), 2 pairs of warning plates, double LED illuminated, extendable up to 3,300 mm, removable with plug, 2 x 7-pin fail-safe plugs front with connection cable, 1 x 7-pin agricultural plug, voltage transformer 12/24 volts (for electrical system only, not ABS/EBS) Floor Steel/chequer plate floor on gooseneck, between longitudinal and cross members with perforated plate covering. Axle covers not drivable, extension to 3,000 or 3,300 mm possible. Operating Notes Note! For 10,000 kg axle load, special approval is required. Approval must be requested separately in each German federal state; a commitment for 20t gross weight is not guaranteed by law. Customer risk. Special approval required if overall towing length exceeds 18,750 mm. Observe country-specific registration regulations. The specified gross vehicle weight is technically feasible; depending on the load, gross weight may not be achievable while adhering to permissible axle, support, and fifth-wheel loads. Observe BO-circle regulations!!! Registration / Plates Registration country: Germany, with Dekra inspection and report (according to §13 EC - FGV), prepared for single-line number plate holder, warning plate according to ECE-70, contour marking with reflective tape according to ECE R 048 Paintwork Front frame hot-dip galvanized with passivation, rear frame RAL9006 silver, drawbar KTL black Note: Archive images!

Koşul: yeni, makine/araç numarası: f8fb99947a1c19bc4d63549ff, boş ağırlık: 6 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 24 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing race Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flaps Half-shell fenders on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles 1 plastic tool box, with shelf, w=620/h=360/d=440 mm, lockable with padlock (padlock not included) Extendable widening to 3,000 mm (not at the rear chamfer) (the track width of machines or vehicles to be transported must not exceed 2,550 mm outer frame width) Central storage compartment for wooden beams on the loading area 70 mm wooden beams for widening to 3,000 mm Lashing points on low loader 1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated 5t 7 pairs of mushroom lashing points, recessed at top and side in outer frame, each rated 10t 1x at the front on the gooseneck 6x in the drop deck First lashing point 250 mm from front, last max. 250 mm from rear, distance between lashing eyes not greater than 1,100 mm 5 pairs of stake pockets recessed in side frame, internal dimension 70 x 40 mm (convertible for 5t ring lashing eyes, not included) 2 pairs of additional fold-down lashing eyes, each rated 10t 1x on the gooseneck (projecting) 1x recessed in the floor behind the last axle Trailer turntable drawgear Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (equalising rocker) Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice with M&S marking Steel wheels in twin arrangement, factory silver Brake System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connection lines to the towing vehicle ABS and ALB, with ABS connector at front, with connection cable Brand: Wabco or Knorr Note: This trailer may only be towed by vehicles which ensure the proper functioning of the ABS! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red rear outline marker lights 2 x 7-pin non-interchangeable plugs at front, with connection cable 1 LED rotating beacon with holder, switched via parking lights (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000mm Floor Gooseneck at front with steel/chequer plate covering Storage box recessed on the transition slope to gooseneck After that, 70 mm softwood floor, steel/chequer plate covering in wheel arch area Rear slope with 70 mm softwood floor Low-bed platform including rear slope 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety support, foldable underneath (prevents lateral slipping of the ramps, not in conjunction with hydraulic side ramp shift) Wooden inlay on ramps Spring lifting assistance Operating instructions At 10,000 kg axle load, an exemption permit is required, only indivisible loads possible!!! The stated total weight is technically possible; depending on the load, the gross weight may not be achievable while adhering to permissible axle, support, and kingpin loads. (Poor driving and trailing behaviour may result from incorrect load distribution) Country of registration/Plates Country of registration: Germany Approval according t Ppedpfxei Riwfj Al Ist

Koşul: yeni, makine/araç numarası: 81b04fd2e28f354df79a4c3b3, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5``, Further information Chassis Swap Central Axle Trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear Locking folding adapter + height adjustment for parking height 1,000 - 1,120 mm, folding centre supports and re-mountable guide rollers upwards, 4 container locks with sturdy outriggers on 20-foot base for swap bodies 7.15 / 7.45 and 7.82 1 pair of gearbox support feet at the front, with straight lower section and single-side operation on FR right 2 wheel chocks with holders Side underrun protection aluminium Rear underrun protection steel Half-shell mudguards Drawbar arrangement for central axle trailer Drawbar with certified 50 mm towing eye, freight forwarding version (not suitable for trucks with tail lift, or subject to further inspection in case of order) Undermount drawbar, free drawbar length approx. 2200 mm Axles & Suspension SAF drum brake axles Axle/chassis laser alignment, reduces tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system with colour-coded piping for easy servicing. Spring-loaded parking brake 2 misconnection-proof coupling heads at the front, with connection lines to the truck, connector at FR-right EBS, Electronic Brake System with EBS plug at front, with connection cable, connector at FR-right Note: The trailer must only be towed by vehicles which ensure ABS functionality! With raise/lower valve, with holding function in both lower and raise position Vehicle – Driving Stability System Wheels and tyres 235/75 R17.5'' tyres, manufacturer at discretion Steel twin wheels, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red outline marker lights at the rear Psdpfxei Riy Ns Al Iept 1 x 15-pin plug at the front, with connection cable, connector at FR-right 2 additional LED work lights at rear, switched via reversing light 1 LED work light front centre between the carriers, rear-facing, switched via reversing light Operating notes The stated total weight is technically feasible, depending on the load, the total weight may not be achievable within the permissible axle, support and kingpin loads. (Incorrect load distribution can result in poor driving and tracking behaviour) Registration country / Plates Germany With Dekra approval and inspection report (in accordance with §13 EC - FGV) 24/7 Service hotline Prepared for single-line license plate holder Warning plate in accordance with ECE - 70 Contour marking with reflective strips to ECE R 048, white on sides and red at rear Paint Frame in DB 7350 Novagrau, 10-year warranty against rust penetration Note: Archive images!

Koşul: yeni, makine/araç numarası: e7fbe178b85a202cade7e95af, boş ağırlık: 5 kg, azami yük ağırlığı: 22 kg, toplam ağırlık: 29 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Ppodpji Ri Hvefx Al Iet Chassis: Semitrailer for Forwarding Operators Fine-grain structural steel welded construction, fifth wheel plate with replaceable 2" kingpin, with two kingpin positions. Outer frame slightly inclined with Load-Lock profile for lashing strap hooks. Note! To hook lashing straps in combination with side walls, the side walls must be opened! 2 pairs of lashing eyes recessed in the gooseneck outer frame, each rated at 5 tonnes. 8 pairs of lashing eyes recessed in the outer frame at the lowbed area, each rated at 5 tonnes. 24-ton 2-speed landing gear, single-sided operation, with straight base, without compensating mechanism. 2 wheel chocks with holder. Aluminum side underrun protection. Steel rear underrun protection. Quarter-shell mudguards in front of and behind axle assembly. 2 stainless steel toolboxes, width=600/height=400/depth=500 mm, with polished, lockable door. 2 pairs of stake pockets recessed in the gooseneck outer frame, inner dimension 70 x 40 mm. 6 pairs of stake pockets recessed in the outer frame at the lowbed area, inner dimension 70 x 40 mm. Internal width between stakes: 2420 mm! 3 lashing/stake rails in the lowbed, transversely embedded in the floor, over the entire width to the outer frame (usable internal width between outer removable stakes approx. 2170 mm), approx. 100 mm high; with 20 mm round steel bars, top and bottom, spacing between bars approx. 60 mm. Bottom finished with angle sheet, half open downward. Suitable for lashing and inserting stakes 80 x 80 mm. Removable stakes, width=80/depth=50/length=1200 mm, hot-dip galvanized. Removable stakes, width=80/depth=80/length=1200 mm, hot-dip galvanized. Note: Stake pockets/removable stakes are not intended for the sole securing of long materials, pipes, etc. without additional lashing. Mechanical rear extension with hand crank, extendable by approx. 1,500 mm, lockable every 500 mm. Comes with support beam, load capacity over the entire width: 2,000 kg at 500 mm, 1,000 kg at 1,000 mm, and 500 kg at 1,500 mm. Includes retractable rear underrun protection with lighting. 2 pairs of removable stakes, width=80/depth=80/length=1200 mm, hot-dip galvanized. Open storage compartment for removable stakes, at the front wall or under the loading area (for 10 removable stakes 80 x 50 x 1200 mm and 4 removable stakes 80 x 80 x 1200 mm). Axles + Suspension SAF drum brake axles. Axle/chassis laser alignment - reduces tire wear and fuel consumption. Last axle is self-steering with automatic reverse lock via reverse light, and additional lock function on the vehicle via hand knob. Air suspension with raise & lower valve. Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice. Steel twin wheels, factory silver. Braking System 2-line compressed air brake system. Spring-loaded parking brake. 2 foolproof coupling heads at the front, without connecting line. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS CAN bus signal for display in the truck cab. The truck must be correspondingly equipped; no truck installation or calibrated weighing system included. Electrics 24 Volt, multi-chamber tail lights, yellow LED side marker lights. 2 white position lights at the front. 2 white/red track marker lights at the rear. 2 x 7-pin sockets at the front, without connecting cable. 2 additional LED work lights at the rea