İkinci El Eigenbau Ral 5010 Satın Al (5.113)

Durum: iyi (kullanılmış), Donanım: Tip plakası mevcut, Ystral Tip X 11.000 S/LDT-4-154P Rotor-Stator prensibiyle çalışan dispersör ayaklı, kontrol ünitesi olmadan Nodszp Nvwepfx Afiodb YSTRAL dispersörler, orta viskozite aralığında emülsiyon ve süspansiyon üretimi için tasarlanmıştır. Orta viskozite aralığında ince dağılım için yüksek gereksinimleri karşılar ve 2.000 litreye kadar partilerde kullanılır. Tahrik: 2.910 devir/dakika / 11,0 kW

Durum: iyi (kullanılmış), Üretim yılı: 1981, Fonksiyonellik: tamamen fonksiyonel, güç: 4 kW (5,44 bg), presleme kuvveti: 40 t, masa genişliği: 660 mm, masa uzunluğu: 530 mm, toplam uzunluk: 15.850 mm, toplam genişlik: 12.450 mm, toplam yükseklik: 23.700 mm, toplam ağırlık: 4.500 kg, hidrolik silindir ayarı: 80 mm, vuruş ayarı: 95 mm, LEN 40C Eksantrik Pres. Üretim yılı 1981(SMERAL TRNAVA Çek Cumhuriyeti). Teknik veriler: - presleme kuvveti: 40 ton - Makinedeki atlama sayısı: 70/142 dk - atlama sayısı manuel çalışma: 50 dk - kaydırıcı strok ayarı: 8-95 mm - kaydırma stroku: 80 mm - masa yüzeyi: 660 x 530 mm - kaydırıcı yüzey: 400 x 250 mm - uzatma: 265 mm - motor gücü: 3 / 4 kW - pres boyutları: 1585 x 1245 x 2370 mm - ağırlık: 4500 kg Makinenin teknik durumu iyidir. Ndsdpfxstzwt Ue Afiob Makineyi hareket halindeyken incelemek ve kontrol etmek mümkündür.

Durum: iyi (kullanılmış), Üretim yılı: 1989, Fonksiyonellik: tamamen fonksiyonel, güç: 7,5 kW (10,20 bg), presleme kuvveti: 63 t, masa genişliği: 800 mm, masa uzunluğu: 630 mm, toplam uzunluk: 17.900 mm, toplam genişlik: 14.250 mm, toplam yükseklik: 25.500 mm, toplam ağırlık: 5.850 kg, yükseklik ayar tipi: mekanik, vuruş ayarı: 105 mm, Eksantrik pres LEN 63C. Üretim yılı 1989 (SMERAL TRNAVA Çek Cumhuriyeti). Teknik veriler: - presleme kuvveti: 63 ton - otomatik vuruş sayısı: 65/130 dakika - vuruş sayısı manuel çalışma: 45/50 dk - strok ayarı: 10-105 mm - kaydırıcı stroku: 70 mm - masa yüzeyi: 800 x 630 mm - kaydırıcı yüzey: 450 x 280 mm - çıkıntı: 315 mm - masa kızağı boşluğu: 335 mm - sütunlar arasındaki boşluk: 355 mm - vites sayısı: 2 - motor hızı: 730/1440 dakika - motor gücü: 4/7,5 kW - pres boyutları: 1425 x 1790 x 2550 mm - Ağırlık: 5850 kg Makine teknik açıdan iyi durumdadır. Nodpfx Aotzxdzefiodb Makineyi çalışırken görsel olarak incelemek ve test etmek mümkündür.

Durum: mükemmel (kullanılmış), Üretim yılı: 1987, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 10 t, strok boyu: 65 mm, masa genişliği: 450 mm, masa uzunluğu: 320 mm, koç plakası genişliği: 280 mm, tabla uzunluğu: 180 mm, toplam uzunluk: 1.145 mm, toplam genişlik: 970 mm, toplam yükseklik: 1.930 mm, toplam ağırlık: 1.250 kg, Donanım: dokümantasyon / kılavuz, LEN 10C Eccentric Press. Year of manufacture: 1987 (SMERAL TRNAVA, Czech Republic). - Press force: 10 tons - Number of continuous strokes: 80 or 160 strokes/min - Number of single strokes: 45/min and 60/min - Adjustable stroke length: 6–65 mm - Slide adjustment between table and ram: 45 mm - Throat depth: 160 mm - Distance between table and ram: 225 mm - Table dimensions: 450 x 320 mm - Ram dimensions: 280 x 180 mm - Overall dimensions (L x W x H): 1145 x 970 x 1930 mm Nedpfx Afjy Ry Tfeisdb - Pneumatic clutch (min. compressed air pressure: 0.4 MPa) - Motor power: 1.1/1.5 kW - Press weight: 1250 kg.

Durum: mükemmel (kullanılmış), Üretim yılı: 1982, Eksantrik pres LEN 25C. Üretim yılı. 1982 (SMERAL TRNAVA Çek Cumhuriyeti). Teknik veriler: Ndedpjk Nltlofx Afiob - presleme kuvveti: 25 ton - otomatik vuruş sayısı: 76/155 dakika - vuruş sayısı manuel çalışma: 45/60 dk - strok ayarı: 8-85 mm - kaydırıcı stroku: 55 mm - masa yüzeyi: 560 x 450 mm - kaydırıcı yüzey: 355 x 225 mm - sütunlar arasındaki boşluk: 250 mm - vites sayısı: 2 - motor gücü: 2,2 / 3 kW - pres boyutları: 1135 x 1365 x 2145 mm - Ağırlık: 2500 kg

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Otomatik aplikatör ve kurutma tünelinden oluşan boya püskürtme makinesi. Rulo ile UV vernik uygulaması. Otomatik istifleyici istifleme. Vernikleme formatı B1+ Ndjdpjwhdbnjfx Afieb

Durum: ikinci el, Üretim yılı: 2017, kontrolör üreticisi: Heidenhain, kontrolör modeli: TNC 640, Açıklama: Genel: Üretim yılı: 2017 Njdpfx Asy Eu Tvsfisdb Kontrol: Heidenhain TNC 640 X/Y/Z hareket mesafesi: 4.500/1.800/1.300 mm Devir sayısı: 5.000 dev/dak Takım tutucu: SK 50 Freze kafası (Mil): Teknoloji: Diagonal kafalı dişli milli Bölgelik: 0,001° Devir sayısı: 5.000 dev/dak Takım tutucu: SK 50 Maks. güç: 43 kW Maks. tork: 1.045 Nm Medya iletimi: Soğutma sıvısı (KSS) + üfleme hava Çalışma tablası: Bağlama yüzeyi: 6.000 x 1.100 mm T-yuvaları: 6x 22H12, aralık 140 mm Takım magazini: Teknoloji: Zincirli magazin İstasyon sayısı: 40 Takım değiştirici: Çift kavramalı (yatay/dikey) Maks. takım çapı: 125 (250) mm Maks. takım uzunluğu: 400 mm Donanım / Aksesuarlar: Mesafe ölçüm sistemleri: Tüm eksenlerde direkt Talaş tahliyesi: Talaş konveyörü Soğutma sıvısı sistemi: Filtreli IKZ ünitesi, 20 bar Parça ölçüm: Kablosuz ölçüm probu M&H Kurulum modu: Elektronik el çarkı HR 510 Yazılım opsiyonu: Adaptif Kontrol

Durum: ikinci el, Üretim yılı: 2017, presleme kuvveti: 500 t, Hidralmac Four-Column Press – 500 t – 1,900 × 800 mm – Stroke 600 mm For sale is a hydraulic four-column press manufactured by Hidralmac with a pressing force of 500 t. This machine is designed for demanding, continuous production processes and stands out due to its high stability, precise control, as well as extensive monitoring and adjustment capabilities. Thanks to its robust construction and high-performance hydraulics, it is ideally suited for forming, pressing, and series production applications. ==== Technical Specifications + Information: Hydraulic Four-Column Press – 500 t ==== General Data - Manufacturer: Hidralmac - Model: Four-Column Press - Design: Hydraulic column press - Machine type: Production press - Pressing force: 500 t - Machine weight: approx. 18 t - Dimensions (L × W × H): approx. 2,400 × 2,400 × 5,500 mm - Operation: Two-hand control ==== Working Area - Clearance width: 1,300 × 800 mm - Working height: 700 mm - Stroke: 600 mm - Table height above floor: approx. 1,000 mm ==== Table & Ram - Table size: 1,900 × 800 mm - Ram size: 1,300 × 800 mm - Column diameter: 200 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 5–10 mm/s - Return speed: 150 mm/s ==== Hydraulics & Drive - Motor power: 50 kW - Return force: 50 t - Number of cylinders: 1 - Oil tank capacity: 1,500 l - Oil quantity: approx. 1,400 l - Oil cooling: electric ==== Control & Functions - Position measurement via linear encoder - Adjustable parameters: pressure, speed, stroke, holding positions - Switch-over point from rapid approach to pressing speed freely definable - Pressure monitoring with automatic return or pressure hold function - Pressure consistency within approx. 5% tolerance Nedpfx Asd E Irmefisdb - Automatic monitoring of hydraulics, pumps, and temperature - Synchronous monitoring and automatic correction for load deviations - Monitor control for programming and operation - Control cabinet mounted on the machine ==== Construction & Equipment - Columns and cylinder manufactured from tool steel, induction-hardened and chrome-plated - Ram guidance with bronze slide bushes - Adjustable two-hand control - Robust machine frame for industrial continuous operation ==== Scope of Delivery & Documentation - Manuals and operating instructions (two copies) - CE declaration - Safety inspection by authorized service provider - 3D drawings for customer approval ===== Forming technology, series production, pressing processes, industrial production, heavy-duty applications Hydraulic press, hydraulic press, four-column press, column press, production press, industrial press, forming press Looking for a hydraulic press tailored to your application? Contact us for a customized quotation. Our core strength lies in special-purpose machine construction and press automation. We supply bespoke hydraulic presses at surprisingly attractive prices. Only components from leading European manufacturers are used in our presses’ hydraulic systems.

Durum: ikinci el, Üretim yılı: 2021, makine/araç numarası: A2536805, presleme kuvveti: 40 t, Hidralmac C-Frame Single Column Hydraulic Press – 40 t Forging Press – Stroke 250 mm For sale is a hydraulic single column press (C-frame design) from Hidralmac, offering a pressing force of 40 t. This machine is designed for forging, forming, and bending applications, and can be custom-built to client specifications. With adjustable speeds, precise positioning control, and flexible operation modes, it is suitable for both manual setup work and fully automated processes. ==== Technical Data & Information: Hydraulic C-Frame Press – 40 t ==== General Information - Manufacturer: Hidralmac - Model: Single Column Press / Forging Press - Design: C-frame press - Press force: 40 t - Production time: approx. 3 months from receipt of payment ==== Working Area - Open height: 450 mm - Stroke / Travel: 250 mm ==== Table & Ram - Table dimensions: 600 × 650 mm with T-slots - Ram plate: 500 × 200 mm - Table opening: 200 × 170 mm - Table height: 850 mm ==== Speeds - Approach speed: max. 90 mm/s - Pressing speed: 10 mm/s - Return speed: max. 90 mm/s - Setup mode speed: approx. 9.5 mm/s ==== Hydraulics & Drive - Motor power: 5.5 kW - Oil tank: 200 l - Return force: 6.3 t ==== Controls & Functions - Positioning accuracy: ± 0.5 mm - Adjustable dwell time: 0 – 10 s (in 0.1 s increments) Ndedpfx Aefxyhfofijb - Pressing pressure adjustable via control - Switch between manual and automatic operation via key switch - Two-hand control for safe operation - Sensor-based position control (top dead center, bottom dead center, switching point) ==== Operating Modes - Manual setup mode with stop at any time - Bending mode via two-hand operation - Automatic mode for closed tooling - Optionally usable for punching, blanking, and bending ==== Applications: Forging, forming technology, bending processes, punching, hole punching, small batch production, toolmaking Keywords: C-frame press, forging press, hydraulic press, industrial press, bending press, tool tryout press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Our presses also exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which is based on these standards. Our core strength is special machine construction and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. The hydraulic systems primarily use components from leading European manufacturers.

Durum: ikinci el, Üretim yılı: 2004, Teknik detaylar: Nominal güç: 60 kVA Kontrol: Modül kontrolü Yakıt türü: Biyogaz Makine ağırlığı yaklaşık: 1,9 ton Boyutlar U x G x Y: 2,9 x 1,4 x 1,9 m Çıkış: 55 KW Jeneratör çok uygun bir fiyata yedek parça donörü olarak satılmaktadır! Jeneratör çalıştırılmayacaktır. İşlevselliği ve çalışma saatleri bilinmiyor. Njdpfx Asu Nvclefijdb Ortam sıcaklığı 221°F / 105° C Şalter dolabı kapağındaki kontrol paneli üzerinden çalıştırma. Taban çerçevesi, jeneratörün üzerine monte edildiği çelik bir yapıdır. Dijital saat sayacı Motor: -4 silindirli; Liebherr tip G 924 TI, ara soğutmalı turbo; hız 1.500 rpm. Jeneratör: -VEM Motors; 400 V / 690 V, hız 1.555 rpm; maks. çıkış 75 hp / 55 kW Gaz karıştırıcı: -RMG Regel- Messtechnik GmbH; RMG 983-100/50 tipi *

Durum: yeni, Üretim yılı: 2017, makine/araç numarası: DF0152, presleme kuvveti: 80 t, HIDRALMAC Four-Column Press – 80 t – 800 × 800 mm – Deep Drawing Press with Cushion For sale is a hydraulic four-column press (deep drawing press) from HIDRALMAC with a pressing force of 80 tonnes. This machine is designed for drawing and forming processes and features an integrated deep drawing cushion as well as modern control and safety technology. Thanks to its compact design and robust components, it is ideally suited for small batch production, toolmaking, and precise forming operations. ==== Technical Specifications & Information: Hydraulic Four-Column Press – Deep Drawing Press – 80 t ==== General Information - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine designation: Deep Drawing Press - Design: Four-Column Press - Pressing force: 80 t - Machine weight: approx. 5.1 t - Total power requirement: 12 kW - Operation: Two-hand control - Main cylinder: 1 unit ==== Working Area - Working area: 800 × 800 mm - Table size: 800 × 800 mm - Working height: 800 mm - Table height: 800 mm - Stroke: 500 mm - Travel: 700 mm ==== Table & Ram - Ram plate: 2,800 × 1,300 mm - Column diameter: 75 mm ==== Speeds - Approach speed: 9.8 mm/sec - Working speed: 9.8 mm/min - Return speed: 18 mm/sec ==== Deep Drawing Unit - Cushion force: 25 t (at 280 bar) - Cushion stroke: 200 mm - Rod diameter: 30 mm - Cushion speed: 80 mm/sec - Cushion motor: 10 kW ==== Hydraulics & Power - Main motor: WEG 15 kW - Pump: Rexroth / Parker axial piston pump - Hydraulic block and valves: Rexroth / Parker - Hydraulic tank: 300 l (oil capacity approx. 250 l) - Auxiliary oil tank: 150 l - Hydraulic pressure control: via PLC (from 10 t) - Air cooling with electric fan - Lubrication: manual via grease nipples or cartridges ==== Controls & Operation - Controls: Siemens / Moeller - Operating modes: automatic, semi-automatic, manual (setup mode) - Control panel on swiveling arm - Movable two-hand control - USB interface for data transfer - Remote control (Siemens remote maintenance) Nodpfjfxyh Hex Afijdb - Spacer sensors for stroke length adjustment - Pressure hold: 0–10 sec ==== Safety & Equipment - Light barriers front and rear (Schmersal, 800 mm) - Additional diagonal protection in the lower area - Hydraulic system safety monitoring ===== Drawing, Forming, Small Batch Production, Toolmaking, Sheet Metal Processing Hydraulic Press, Deep Drawing Press, Four-Column Press, Deep Draw Press, Forming Press, Industrial Press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery directives as well as European Machine Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Our presses also surpass Canadian and European safety requirements, as they comply fully with the national Brazilian safety regulation NR 12, which builds upon these standards. Our core strengths are custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Durum: yeni, presleme kuvveti: 400 t, HIDRALMAC Portal Straightening Press – 400 t – Column Gap 3,400 mm – Traversing Bridge For sale is a hydraulic portal straightening press manufactured by HIDRALMAC with a pressing force of 400 t. The machine is designed for heavy-duty straightening and forming operations, featuring a large-dimension traversing bridge and a laterally movable cylinder. Thanks to its robust construction and high flexibility, it is ideally suited for large workpieces and demanding industrial applications. ==== Technical Data & Information: Hydraulic Portal Straightening Press – 400 t ==== General Information - Manufacturer: HIDRALMAC - Model: Portal Straightening Press - Machine designation: Straightening press - Design: Portal press - Pressing force: 400 t - Machine weight: approx. 49 t - Dimensions (L × W × H): 7,900 × 5,500 × 4,300 mm ==== Working Area - Column gap: 3,400 mm - Max. distance table to ram: 1,000 mm - Table height above floor: approx. 700 mm - Stroke: 500 mm ==== Movement & Flexibility - Bridge travel: 5,000 mm - Lateral cylinder travel range: 2,800 mm - Bridge travel speed: 0–33 mm/sec - Cylinder lowering speed: 0–10 mm/sec - Cylinder stroke speed: 0–25 mm/sec ==== Hydraulics & Power - Total power requirement: 55 kW - Pump capacity: max. 131 l/min - Return force: 26 t - Oil tank: 700 l ==== Construction & Equipment - Reinforced table in the front area (reinforcement over 1,500 mm, additional weight approx. 4,000 kg) - Protective covers for the bridge drive motors - Signal lamps right and left with protective guards Ndjdefhcc Rspfx Afisb - Galvanized grating inside the drip pan ==== Application & Features - Robust design for heavy straightening operations - High flexibility thanks to movable bridge and cylinder - Suitable for large and heavy workpieces ===== Straightening operations, heavy forming, large components, steel construction, mechanical engineering Hydraulic press, portal press, straightening press, industrial press, forming press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are built according to German machinery guidelines as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Moreover, our presses exceed Canadian and European safety requirements by fully complying with the Brazilian national safety guideline NR 12, which builds upon these standards. Our greatest strength lies in custom machine engineering and press automation. We offer tailor-made hydraulic presses at surprisingly competitive prices. For the press hydraulics, mainly components from leading European manufacturers are used.

Durum: yeni gibi (sergi parçası), Üretim yılı: 2016, presleme kuvveti: 160 t, HIDRALMAC Four-Column Press – 160 t – 1,200 × 800 mm – Tryout Press Njdpefxyi Iofx Afiodb For sale is a hydraulic four-column press (tryout press) manufactured by HIDRALMAC with a pressing force of 160 t. This machine is ideal for tool testing, adjustment work, and small batch production. Its compact design, precise controllability, and robust construction make it a reliable solution for workshop and production environments. ===== Technical Data & Information: Hydraulic Four-Column Press – Tryout Press – 160 t ==== General Information - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine Designation: Tryout Press - Type: Four-Column Press - Pressing Force: 160 t - Machine Weight: approx. 7 t - Total Power Requirement: 7.5 kW - Main Cylinder: 1 piece ==== Working Area - Installation Height: 800 mm - Stroke: 600 mm - Table Height: 850 mm - Side Column Distance: 400 mm ==== Table & Load - Table Area: 1,200 × 800 mm - Max. Table Load: 5 t - Return Force: 16 t ==== Speeds - Advance Speed: 1–9.8 mm/sec - Return Speed: 1–9.8 mm/sec ==== Hydraulics & Operation - Oil Volume: approx. 220 l (AW 46) - Robust and low-maintenance hydraulic system design ==== Construction & Features - Column Diameter: 160 mm - Compact construction for flexible applications - Suitable for tool setup and tryout operations ===== Tool calibration, tryout operations, small batch production, toolmaking, metal forming technology Hydraulic press, tryout press, four-column press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific requirements? Contact us for a custom quote. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply fully with the Brazilian national safety guideline NR 12, which is based on these standards. Our main strengths are custom machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. The hydraulics of our presses are equipped predominantly with components from leading European manufacturers.

Durum: ikinci el, Üretim yılı: 2016, makine/araç numarası: 4303, presleme kuvveti: 500 t, Hidralmac Four-Column Hydraulic Press – 500 t – 2,100 × 1,500 mm – Stroke 1,000 mm For sale is a hydraulic four-column press from the manufacturer Hidralmac with a press force of 500 t. This machine is designed for demanding forming processes in continuous industrial operation and, thanks to its multi-cylinder technology, high dynamics, and extensive control and monitoring functions, provides a precise and powerful solution for complex applications. ===== Technical Data & Information: Hydraulic Four-Column Press – 500 t Ndsdpfx Aodyynvefisb ==== General Information - Manufacturer: Hidralmac - Model: Four-Column Press - Design: Hydraulic Column Press - Machine Type: Forming Press - Pressing Force: 500 t (max. 550 t with reserve) - Machine Weight: approx. 39 t - Dimensions (L × W × H): 5,100 × 2,800 × 4,040 mm ==== Working Area - Pass-Through Width: 2,100 × 1,500 mm - Installation Height: 1,500 mm - Stroke: 1,000 mm - Table Height Above Floor: approx. 850 mm ==== Table & Ram - Table Size: 2,100 × 1,500 mm (with T-slots) - Ram Size: 2,100 × 1,500 mm - Total Table Plate Size: approx. 2,750 × 1,600 mm - Total Ram Plate Size: approx. 2,750 × 1,600 mm ==== Speeds - Approach Speed: 300 mm/s - Return Speed: 300 mm/s - Pressing Speed: - 200 t: 28 mm/s - 300 t: 20 mm/s - 500 t: 6 mm/s ==== Hydraulics & Drive - Total Power Requirement: 62 kW - Return Force: 40 t - Main Cylinders: 2 units - Auxiliary Cylinders: 2 units - Axial Piston Pump: Bosch Rexroth A4VSO125 (approx. 290 l/min) - Hydraulic Block: Rexroth - Oil Tank Capacity: approx. 2,000 l - Pressure Regulation via PLC (min. 50 t) - Pressure Holding Time: 0–900 s - Energy saving via automatic pump shutdown when tool is closed ==== Ejector & Auxiliary Systems - Ejector: 4 × 15 t at 250 bar - Ejector Stroke: 300 mm (PLC adjustable) - Ejector Speed: - Forward: 95 mm/s - Return: 240 mm/s ==== Control & Electrical - Control: Siemens S7-300 - Monitor-based control with pressure and travel programming - Storage Capacity: up to 200 programs - Electronics: Siemens / Möller - Control panel on swivel arm - Voltage: 400 V / 50 Hz - Control Voltage: 24 V ==== Safety & Monitoring - Light sensors from SICK (1,500 mm, front side) - Monitoring of hydraulics, pumps, and temperature - Synchronization monitoring of main cylinders with automatic adjustment - Pressure monitoring with automatic return or hold function (± 5%) ==== Construction & Features - Main Cylinder Column Diameter: 360 mm - Auxiliary Cylinder Column Diameter: 120 mm - Material: ASTM A36, manufactured according to DIN 8651 - Polycarbonate safety glazing (8 mm) in the working area and doors - Liquid channel around the table (25 mm radius) ==== Additional System - Nitrogen compression unit (up to 280 bar, switchable) ===== Forming technology, heavy forming, series production, large-part machining, industrial manufacturing Hydraulic press, hydraulic column press, four-column press, column press, forming press, industrial press, production press

Durum: yeni gibi (sergi parçası), Üretim yılı: 2017, makine/araç numarası: DF0052, presleme kuvveti: 200 t, HIDRALMAC Double Column Press – 200 t – 1,200 × 1,000 mm – Deep Drawing Press For sale is a hydraulic double column press (deep drawing press) manufactured by HIDRALMAC with a pressing force of 200 t. This machine is engineered for demanding deep drawing and forming processes and, thanks to its advanced control technology, high traversing speeds, and precise pressure regulation, offers optimal conditions for industrial series production. ===== Technical Data & Information: Hydraulic Double Column Press – Deep Drawing Press – 200 t ==== General Information - Manufacturer: HIDRALMAC - Model: Double Column Press - Machine designation: Deep Drawing Press - Type: Double Column Press - Press force: 200 t - Machine weight: approx. 20.5 t - Space requirements (L × W × H): approx. 4,000 × 2,600 × 5,000 mm - Main cylinder: 1 unit ==== Working Area - Column gap: 1,200 × 1,000 mm - Installation height: 800 mm - Working height: 1,100 mm - Stroke: 600 mm ==== Table & Ram - Table plate: 1,200 × 1,000 mm - Ram plate: 1,200 × 1,000 mm - T-slots: to DIN 650-22 (custom configurations possible) - Return force: 20 t ==== Speeds - Approach speed: 170 mm/sec - Return speed: 150 mm/sec - Working speed: 15 mm/sec - Setup mode: 2–10 mm/sec ==== Hydraulics & Power - Total power requirement: 32.5 kW - Axial piston pump: Bosch Rexroth - Hydraulic block: Rexroth - Oil requirement: approx. 500 l - Oil cooling: electric - Pressure control: via PLC (from 20 t) - Pressure hold time: 0–10 sec ==== Control & Operation - Control: PLC system - Voltage: 400 V / 50 Hz - Control voltage: 24 V - Pressure setting: 20–200 t via monitor - Program memory: up to 200 programs - Operation: mobile two-hand operation - Socket in control cabinet: 220 V ==== Application & Features - Precise control for deep drawing processes - High repeat accuracy Nsdpfxsfxyirj Afisdb - Suitable for series production and toolmaking ===== Deep drawing, metal forming, series production, sheet metal processing, toolmaking Hydraulic press, double column press, deep drawing press, forming press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German Machinery Directive as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply fully with the Brazilian national safety standard NR 12, which builds upon these directives. Our core strength lies in special purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. The hydraulics of our presses mainly use components from leading European manufacturers.

Durum: yeni gibi (kullanılmış), Üretim yılı: 2016, presleme kuvveti: 400 t, HIDRALMAC Four-Column Press – 400 t – 2,500 × 1,600 mm – Deep Drawing Press with Die Cushion For sale is a hydraulic four-column press (deep drawing press) from HIDRALMAC, offering a pressing force of up to 400 t. This machine is specifically designed for demanding deep drawing and forming operations and features a powerful die cushion as well as advanced control and safety technology. Thanks to its robust construction and comprehensive equipment, it is ideally suited for industrial series production and complex forming tasks. ==== Technical Data & Information: Hydraulic Four-Column Press – Deep Drawing Press – 400 t ==== General Specifications - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine type: Deep Drawing Press - Design: Four-column press - Pressing force: 50–400 t (adjustable) - Machine weight: approx. 27.5 t - Dimensions (L × W × H): approx. 3,950 × 2,200 × 4,850 mm - Main cylinders: 2 units ==== Working Area - Pass-through width: 2,500 mm - Installation height: 1,300 mm - Stroke: 900 mm - Table height above floor: approx. 900 mm ==== Table & Slide - Table size: 2,500 × 1,600 mm - Slide size: 3,100 × 1,600 mm - Column diameter: 220 mm - Return force: 40 t - T-slots: as per DIN 650-22 (custom options available) ==== Speeds - Approach speed: 200 mm/sec - Return speed: 200 mm/sec - Working speed: 5–15 mm/sec ==== Deep Drawing Unit - Die cushion: 1,400 × 800 mm - Die cushion force: 30–60 t - Die cushion stroke: 250 mm - Die cushion speed: 5–80 mm/sec ==== Hydraulics & Power - Total power requirement: 62 kW - Oil tank: 1,500 l - Oil volume: 1,200 l - Hydraulic components: Bosch Rexroth - Pressure build-up: up to 400 t in max. 4 seconds - Pressure control: adjustable via monitor ==== Control & Operation - Control system: Siemens - Monitor: Siemens 12" - Modes of operation: manual, semi-automatic, fully automatic - Travel monitoring adjustable via monitor Nedpfx Afjin Et Njiodb - Remote control (remote maintenance) - Two-hand operation on moveable stand - Electrical control cabinet for wall mounting ==== Safety & Features - Safety PLC for hydraulic block monitoring - Light sensors front and rear: SICK (1,300 mm) - Lateral safety doors left and right (each 1,000 × 800 mm) - Interior LED lighting - Energy control system (idle consumption reduced to approx. 2 kW) ==== Construction - Robust welded structure - ASTM A36 structural steel - Induction-hardened and chrome-plated piston rods - Low-maintenance and reliable - CE certificate - Documentation in German ===== Deep drawing, forming technology, series production, sheet metal forming, toolmaking Hydraulic press, deep drawing press, four-column press, forming press, industrial press, production press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our key strengths are special-purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly competitive prices. We primarily use hydraulic components from leading European manufacturers for our presses.

Durum: yeni gibi (kullanılmış), Üretim yılı: 2022, makine/araç numarası: DF0147, Straightening Press – Manufacturer: Hidralmac – 150 t Profile Straightening Press – Servo Controlled For sale is a high-precision profile straightening press by Hidralmac with a pressing force of up to 150 t. The machine is equipped with two hydraulic cylinders, a servo-driven positioning system, and a camera-based process monitoring system, making it ideal for the precise straightening of profiles and components with stringent quality requirements. ==== Technical Data & Information: Straightening Press Hidralmac – 150 t Profile Straightening Press ==== General Information - Manufacturer: Hidralmac - Model: Straightening Press - Design: Profile straightening press with twin cylinders - Pressing force: 15 – 150 t (infinitely adjustable) - Machine weight: approx. 11.5 t - Space requirement: approx. 8,800 × 1,800 × 2,200 mm ==== Working Area - Cylinder diameter: Ø 100 mm ==== Hydraulics and Drive - Total power consumption: 20 kW - Servo motor: 2 kW - Cooling unit: 1 kW - Oil tank capacity: 350 l - Electric oil cooling: max. 1 kW ==== Speeds - Pressing speed: 0 – 9.9 mm/s (infinitely variable via joystick) - Traverse plate moving speed: up to 100 mm/s ==== Control and Operation - Joystick control - Monitor display with ideal line and scale - Camera system for visual process monitoring - Program management for different profiles Njdpfx Afjfxygwsiodb ==== Clamping Table and System - Mobile clamping plate on linear guide - Drive via chain and servo motor - Rapidly adjustable holding and clamping system - Exchangeable straightening segments (10 inserts) - Standard equipment for one profile included ==== Process Description - Positioning of the profile via clamping system - Deviation visualization via camera system - Manual adjustment via joystick - Continuous monitoring during the process ==== Operating Conditions - Ambient temperature: 5 – 60 °C - Humidity: up to 90% at 20 °C / 50% at 40 °C - Installation altitude: up to 1,000 m above sea level - Voltage fluctuation: ± 10% ===== Profile straightening, straightening operations, metalworking, maintenance, series production, quality correction, component processing Straightening press, profile straightening press, hydraulic press, servo straightening press, twin-cylinder press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements as they comply with all aspects of the national Brazilian safety regulation NR 12, which builds upon these. Our greatest strength lies in customized machine engineering and press automation. We offer tailored hydraulic presses at surprisingly competitive prices. The hydraulics in our presses predominantly utilize components from leading European manufacturers.

Durum: yeni, Üretim yılı: 2019, presleme kuvveti: 275 t, Portal straightening press – Manufacturer: Hidralmac – 275 t gantry press – Table 6,000 × 3,000 mm For sale is a high-performance portal straightening press from Hidralmac with a pressing force of 275 t. This machine features a large table measuring 6,000 × 3,000 mm, a traversing bridge, and a laterally positionable cylinder, making it ideal for straightening, assembly, and heavy-duty machining of large components. ==== Technical Data & Information: Portal Straightening Press Hidralmac – 275 t Gantry Press ==== General Information Nodpjfxyigofx Afiedb - Manufacturer: Hidralmac - Model: Portal Straightening Press - Type: Gantry Press - Pressing Force: 275 t - Machine Weight: approx. 40 t ==== Working Area - Frame Opening: 3,000 mm - Table Size: 6,000 × 3,000 mm - Table Height: approx. 700 mm - Max. Distance Table – Ram: 1,100 mm - Stroke: 900 mm ==== Movements & Travel - Bridge Travel (X/Y): 6,000 mm - Bridge Travel Speed: 30 – 33 mm/s - Lateral Cylinder Adjustment: max. 3,000 mm - Cylinder movement via servo motor and rack-and-pinion ==== Speeds - Lowering Speed: 2 – 10 mm/s - Stroke Speed: 2 – 50 mm/s ==== Hydraulics - Total Power Requirement: 30 kW - Pump System: Axial pump with proportional valve - Oil Tank Volume: 450 l - Retraction Force: 27 t ==== Cylinder - Cylinder Diameter: Ø 440 mm - Ram Extension: 200 mm / Ø ==== Control & Operation - Control System: Siemens S7-1200 - Display: Siemens Touch Panel 9" - Control Console: portable ===== Straightening operations, large component machining, heavy-duty assembly, steel construction, mechanical engineering, maintenance, special applications Gantry press, straightening press, hydraulic press, industrial press, heavy-duty press, die spotting press, tryout press, tool try out press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery directives as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Moreover, our presses exceed Canadian and European safety requirements, as they are fully compliant with the national Brazilian safety regulation NR 12, which builds upon these standards. For the hydraulic systems, we predominantly use components from leading European manufacturers.

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, Parduodamas pusiau drėgnų gyvūnų skanėstų gamybos įrangos komplektas, pagrįstas dvisraigčiu ekstruderiu, skirtas nuolatiniam formavimui, porcijavimui ir vėsinimui. Linija yra išmontuota ir paruošta transportavimui. Ji buvo įsigyta iš tiekėjo, tačiau nenaudota gamyboje; jos konfigūracija atitinka įrenginius, plačiai naudojamus aktyviose pusiau drėgnų skanėstų gamyklose. Nsdpeycfw Eefx Afisdb Ši sistema apima pagrindinius žingsnius, lemiančius pusiau drėgnų produktų kokybę ir tvarkymą: stabilų sausų medžiagų padavimą į ekstruderį, kontroliuojamą formavimą ir pjovimą, bei etapais vykdomą vėsinimą, kuris padeda stabilizuoti tekstūrą, sumažinti limpimą ir deformavimąsi prieš pakavimą ar tolimesnį apdirbimą. Ekstruderis – dvisraigtis, jis buvo naudojamas iki 150 kg/val. gamybos pajėgumui, priklausomai nuo receptūros ir konfigūracijos. Produkto formavimas itin lankstus – tinka dantų lazdelių, širdelių, kaulų, lazdelių, juostelių bei kitų geometrijų gamybai, priklausomai nuo formavimo ir pjovimo įrankių komplekto. Ši įranga buvo naudota tiek aukšto mėsos kiekio/grūdų nenaudojantiems pusiau drėgniems skanėstams, tiek vegetariškiems gaminiams, suprantant, kad galutinės produkto savybės priklauso nuo sudėties, drėgmės tikslo ir procesų parametrų. Sausų komponentų paduoda dozuojanti šnekamojo tipo arba masės pagrindu veikianti tiektuvė, kuri užtikrina pastovesnį išspaudimą ir tolygesnę formą. Tolimesnis porcijavimas vyksta su besisukančiu peilio pjaustytuvu, turinčiu specialius antgalius, sukuriančius švaresnį pjūvį pusiau drėgniems gaminiams. Pjovimo ilgis gali prasidėti nuo ~5 mm ir būti padidintas pagal poreikį; galutinis diapazonas priklauso nuo nustatymų ir pjaustymo galvos. Peilio galvos konstrukcija lanksti, gali būti pritaikoma reikiamam rezultatui ar paviršiui pasiekti, priklausomai nuo formos ir receptūros. Po formavimo ir pjovimo produktas transportuojamas per pirminį vėsinimo modulį su ventiliatoriumi, toliau – per konvejerinį vėsintuvą galutiniam stabilizavimui. Vėsinimas vyksta priverstinėmis aplinkos oro srovėmis, našumas reguliuojamas konvejerio greičiu ir oro srautu. Toks dviejų etapų vėsinimas ypač naudingas pusiau drėgniems produktams, kuriems svarbus paviršiaus stabilumas ir atsparumas tvarkymui, siekiant išvengti gumulėlių susidarymo, deformacijos ar žymių transportavimo metu. Esminis šio komplekto pranašumas – prie ekstruderio galo montuojama maišymo galva, leidžianti pagerinti maišymą ir temperatūros valdymą, bei gaminti dviejų spalvų skanėstus (priklausomai nuo taikymo). Parduodamas kartu ir pusiau drėgnų produktų gamyboje naudojamas skysčių tiekimo komplektas – siurbliai ir talpos įprastiems skysčiams, pvz., vandeniui, riebalams/aliejams, gliceroliui bei panašiems procesų skysčiams. Visi skysčių tiekimo komponentai – iš nerūdijančio plieno, atitinka higieniškos gamybos reikalavimus.

Durum: mükemmel (kullanılmış), Üretim yılı: 2019, Pallet flow rack, Feralco, max. 1,200kg per pallet, max. 640 pallet spaces for Euro and American pallets – used -: Price ex location: €59,500 (net), plus dismantling etc.! Manufacturer: Feralco Type: Dynamic / Pallet flow rack Year of manufacture: 2019 Capacity for approx. 640 pallet spaces System footprint: Width: approx. 14.22m (bay width 2.70m) Depth: approx. 20m Frame height: approx. 10.65m Height with given configuration and pallet height of 2.30m: max. 11.62m Ndjdpexdx Dysfx Afieb Storage: 16 pallets deep 5 bays, each with 2 lanes and 4 levels = 640 pallet spaces Suitable for Euro and American pallets Pallet width: 800 and 1,100mm, with goods max. 1,200mm Pallet depth: 1.20m Max. pallet height: 2.30m Max. pallet weight: 1,200kg Incline: 4.5% Load per lane level: 20,000kg Max. load per lane: 80,000kg Condition: very good Available: immediately, still needs to be dismantled Location: Rhine / Main area

Üretim yılı: 1997, durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Tetra Laval spiral dondurucu, tip: SVR 400/13.75-100-159, 380 V, 3 Faz, 50 Hz, 17 katlı, paslanmaz çelik örgü bant, bant genişliği: 460 mm, giriş yüksekliği: 1030 mm, çıkış yüksekliği: 2700 mm, toplam boyutlar: 5850 mm x 2650 mm x 3350 mm. Evaporatör, soğutma kompresörleri ve Goedhardt çatı kondenseri ile birlikte, tip: KOAL-76L/3-6P, numara: 97-3958-010, üretim yılı 1997, 3 fanlı, boyutlar: 1200 mm x 5500 mm x 1900 mm içermektedir. Ndsdpoy Tl S Ssfx Afieb

Durum: mükemmel (kullanılmış), Viessmann Vitoplex 900 kW. Biyogaz konteyner tesisli merkezi ısıtma sistemi, 2021 model. Az kullanılmış. Ndodpfxeywzvus Afieb

Durum: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Spomasz Spiral Mikser 350L, 200L'lik kıyma arabası için besleme sistemiyle birlikte Müşteri adına satılan, çalışan ve garanti dışı olan, iade kabul edilmeyen bir makine. Njdpozmp Rcsfx Afijdb

Durum: iyi (kullanılmış), Üretim yılı: 1993, Fonksiyonellik: tamamen fonksiyonel, Entegre ahşap blok kesme testereleriyle tam işlevsel Coralli palet üretim hattı. Bu kurulum, ahşap bloklarla EPAL paletlerinin kusursuz bir şekilde üretilmesini sağlar. Hattın kapasitesi vardiya başına yaklaşık 2000 palettir. 25000 avroluk bir palet blok besleyicimiz var Njdovx Hntjpfx Afiodb

Durum: yenilenmiş (kullanılmış), Üretim yılı: 2006, X ekseni hareket mesafesi: 5.500 mm, Y ekseni hareket mesafesi: 1.400 mm, Z ekseni hareket mesafesi: 1.000 mm, maksimum mil hızı: 5.000 dev/dak, mil hızı (dk.): 15 dev/dak, masa genişliği: 1.200 mm, masa uzunluğu: 6.000 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Year of manufacture: 2006 Capacities / Travel distances: Longitudinal (X): 5,500 mm Vertical (Y): 1,400 mm Cross (Z): 1,000 mm Clamping table: Length: 6,000 mm Width: 1,200 mm Nedpey Tkgbjfx Afiedb Number of T-slots on table surface: 12 pcs Width of T-slots: 22 mm Distance between slots: 100 mm Max. workpiece weight: 13,500 kg NC rotary table: Position: Right, flush-integrated into table surface Clamping surface: Ø 1,000 mm Positioning accuracy: 360 x 0.001° Max. workpiece weight: 3,500 kg Number of T-slots: 9 pcs Size of T-slots: 22 mm Slot spacing: 100 mm Paintwork: RAL 7035 light grey / RAL 5011 steel blue Tool holder: ISO 50, DIN 69871 AD Retention knob: DIN 69872 Form A Main drive: Drive power: 100% duty cycle 28 kW Spindle speed range: Spindle speed: 15 – 5,000 rpm Torque: 815 Nm Feeds: X, Y and Z axes: 2 – 10,000 mm/min Max. rapid traverse speed: X, Y and Z axes: 25,000 mm/min Max. feed force: 10,000 N FLC6000 footprint: approx. 11.0 x 5.6 m Overall height: approx. 3.5 m Weight: approx. 35,000 kg HEIDENHAIN iTNC 530 HSCI Automatic MTE Diagonal Milling Head Automatic tool changer Chip conveyor Coolant system with 70 bar & internal coolant supply (ICS) RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced by us after a strict selection process and subjected to a thorough inspection (deep-dive check). Following intensive cleaning, any obvious defects and faults identified are professionally repaired by our skilled service team.