Kullanılmış Fliegl Dts 300 Mit Radmulden satın al (21.441)

Koşul: yeni, makine/araç numarası: 195f80ad09517628522e33a91, boş ağırlık: 7.300 kg, azami yük ağırlığı: 16.700 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis low-loader trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Aluminum side underrun protection Full-width rear mudflap Quarter-shell mudguards in front of the 1st axle 1st pair of wheel recesses embedded in the deep bed lane area after the step, sloped for entry, approx. 1600 mm long at the bottom, approx. 400 mm deep. Note: The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the deep bed lane area, sloped for entry, approx. 600 mm long at the bottom, approx. 300 mm deep. Note: The frame in the main beam area is 300 mm higher than the wheel recess. Extensions telescopic to 3,000 mm (not at rear taper) (The track width of the construction machines or vehicles to be transported, however, must not exceed the external frame width of 2,550 mm) Extensions telescopic to 3,000 mm, also in the wheel recesses at the bottom, foldable at the wheel recess extensions (widening not at the rear taper) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Lashing eyes low-loader 1 pair of lashing cutouts in the front longitudinal beam, recessed in the area of the step, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for attachment of lashing straps) 7 pairs of lashing mushrooms recessed at the top and side in the external frame, each rated for 10 t 1 x front in the step 6 x in the deep bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm Drawgear - Turntable trailer drawbar Drawbar with tested 40 mm drawbar eye Axles + Suspension SAF drum braked axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mountings Wheels and tyres 235/75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Nwedpoi Ri Rvjfx Ak Sof Brake system 2-line air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, including interconnecting cable. Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lights, yellow side LED lighting, 2 white position lights in front 2 white/red lane marker lights at rear 2 x 7-pin foolproof plugs at front with connecting cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front step with steel/chequer plate covering Storage box recessed in the approach slope to the step, followed by 70 mm softwood floor, in the wheel housing area with steel/chequer plate covering Rear slope with 70 mm softwood floor Low-loader area including rear slope 6500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable with wooden covering with spring-assist lifting Operating notes For an axle load of 10,000 kg, a special permit is required; only indivisible loads permitted!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achieved while observing the permissible axle, load and fifth wheel loads. (Poor d

Koşul: yeni, makine/araç numarası: ede0610378cbe39cc4883251d, boş ağırlık: 24.000 kg, azami yük ağırlığı: 7.550 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction 1st pair of wheel recesses integrated into the steel platform in the driving aisle area, tapered for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! The frame is 400 mm higher than the wheel recess in the main beam area. If machines are to be transported and the total height needs to be checked, we kindly request the technical datasheet of the machine types with exact specifications (if total height is exceeded -> customer risk, approval required). Depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer. Nedpfxei Ri Ryj Ak Sjwf Turntable with heavy-duty ball bearing slewing ring, toolbox integrated into the turntable front section Rear support foldable 2 wheel chocks with holders Side underrun protection in aluminium Rear mudflaps across the full width Extendable widening to 3,000 mm (not in rear bevel area) (The track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 3 pairs of lashing points integrated into the front floor, each 10 t Incl. 6 pairs of lashing mushrooms recessed in the upper and side external frame, each 10 t 1 x in the gooseneck area The rest distributed in between, distance not greater than 1200 mm 1 x rear bevel 5 pairs of stake pockets recessed into the external frame, inside 70 x 40 mm (convertible to 5 t ring lashing points, not included) Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension SAF drum brake axles Axle/undercarriage laser measured for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Brake System 2-line compressed air brake system Colour-coded piping for easy servicing Spring-actuated parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the truck ABS and ALB, with ABS socket at the front, including connection cable Attention: The trailer may only be towed by vehicles that ensure the effective operation of the ABS! Wheels and Tyres 235 / 75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red rear marker lights 2 x 7-pin non-interchangeable plugs at the front, with connection cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, incl. followed by 70 mm softwood floor, wheel arch areas with steel/checkered plate covering Rear bevel with 70 mm softwood floor Low loader platform incl. rear bevel 8,200 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring lift assistance Operating Instructions With 10,000 kg axle load an exemption permit is required, only indivisible loads possible!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and fifth wheel loads (Poor driving and trailing behaviour possible due to incorrect load distribution) Country of Approval / Plates Country of approval: Germany Incl. with Dekra approval and certificate (acco

Koşul: ikinci el, boş ağırlık: 6.520 kg, azami yük ağırlığı: 23.480 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, yükleme alanı uzunluğu: 8.610 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/140J, arka lastik boyutu: 235/75R17,5 ---/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Loading platform length (low bed) approx. 6.50 m, total loading platform length approx. 8.60 m, loading height approx. 900 mm. Vehicle is being offered on behalf of a bank. Nwodpfxjy E H E Do Ak Sjf -- Subject to typographical errors, mistakes, and modifications. Sample images -- More data at: ! More details: !

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2018, Donanım: ABS, = Diğer seçenekler ve donanımlar = - Arka havalı süspansiyon - Ön havalı süspansiyon = Notlar = Araçla ilgili sorularınız için Bay Seidel (tel. numarası talep üzerine) size memnuniyetle yardımcı olur. Fliegl DTS 300 Alçak Yükleyici BPW akslar, kampanalı frenler, yay depolama, mekanik rampalar, izin verilen azami toplam ağırlık: 24.000 kg, boş ağırlık: 6.350 kg, taşıma kapasitesi: 17.650 kg, yükleme alanı ölçüleri: U 8.490 mm G 2.510 mm, lastik diş derinliği: 1. aks 7-12 mm, 2. aks 7-8 mm, 3. aks 4-7 mm Talep üzerine size leasing veya finansman teklifi sunabiliriz. Nwedpjy Adc Ijfx Ak Sjf Bay Seidel (tel. numarası talep üzerine) size memnuniyetle yardımcı olur. Daha fazla bilgiyi web sitemizde bulabilirsiniz. ... Hatalar, değişiklikler ve ara satış hakkı saklıdır!!! = Diğer Bilgiler = Boş ağırlık: 6.350 kg Yük kapasitesi: 17.650 kg Azami toplam ağırlık: 24.000 kg Dış ölçüler: 0x2550x3500 Daha fazla bilgi için Tobias Ebert ile iletişime geçebilirsiniz.

Koşul: yeni, boş ağırlık: 5.740 kg, azami yük ağırlığı: 24.260 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, renk: gümüş, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: Bovenden, döner tepe lambası, 3 aks, SAF akslar, döner tabla, yaprak süspansiyon, ABS (Anti Blokaj Sistemi), 3 m'ye kadar genişletilebilir, bağlama halkaları, 2 parçalı yükleme rampaları, mekanik rampalar, uzatılabilir çekme oku, yan alüminyum yan koruma, çift lastik, EBS Nwjdpfoxbttqjx Ak Sef Yapı: Yükleme uzunluğu yaklaşık 8,5 m, 3,05 m'ye kadar genişletilebilir. Demo araç! Parabolik süspansiyonlu ve arka aks dengelemeli, 3x 10t SAF aks, azami toplam ağırlık 30t olabilir, uzunluğu ayarlanabilir çekme oku. Stoktan, üretici adına güncel sicil kaydı ile yeni araç! AKSESUAR BİLGİSİ GARANTİSİZ, değişiklik, ara satış ve hata yapılabilir!

Koşul: yeni, makine/araç numarası: 2dff0c136c85096f36822a0bb, boş ağırlık: 7.150 kg, azami yük ağırlığı: 16.850 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring, tool box recessed into turntable front section Foldable rear supports 2 wheel chocks with holders Aluminum side underrun protection Full-width rear spray flaps Extendable widening sections up to 3,000 mm (not including rear taper) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central storage compartment for timber boards on the loading platform 70 mm timber boards for widening up to 3,000 mm Lashing eyes for low loader 3 pairs of 10 t lashing points integrated into the front floor 6 pairs of 10 t lashing mushrooms, recessed into the upper and side outer frame 1x in the neck area The remainder are distributed in between, distance not greater than 1,200 mm 1x rear taper 5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Towing Device Trailer Turntable Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker compensation) Brake System 2-line compressed air brake system Colored line routing for easy servicing. Spring-loaded parking brake included. 2 non-interchangeable coupling heads at the front, with connecting lines to tractor unit ABS and ALB with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! Wheels and Tires 235 / 75 R 17.5 Njdpfx Aji Riy Eok Sewf Manufacturer's choice Twin steel rims, factory silver Electrics 24 Volt, multi-chamber tail lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2x 7-pin non-interchangeable connectors at the front, with connecting cable 1 LED beacon with holder, operated via parking light (removable lamp) 2 pairs of warning signs, double LED illuminated and extendable to 3,000mm Floor Front area steel floor, then 70 mm softwood floor, steel/chequer plate covering in the wheel arch area Rear taper with 70 mm softwood floor Low-bed area incl. rear taper: 8,200 mm Loading Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber deck included With spring-assisted lifting Operating Notes At 10,000 kg axle load, an exemption certificate is required! Only indivisible loads permitted! The total weight specified is technically feasible; depending on the cargo, the total weight may not be achievable due to permissible axle, support, and fifth wheel loads. (Poor driving and trailing performance possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips as per ECE R 048, side white and rear red Paint finish Frame DB 7350 Nova grey 10-year corrosion warranty Drawbar galvanized or black, manufacturer’s choice Steel loading ramps hot-dip galvanized Please note: Archive images!

Koşul: yeni, makine/araç numarası: d461243f559015adca5bb372c, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis for Low-Loader Trailer Steel welded construction Turntable bogie with heavy-duty slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear spray flap Half-shell fenders on 1st axle with anti-spray flaps Additional anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox, with tray, width = 620 mm, height = 360 mm, depth = 440 mm, lockable with padlock Extendable width up to 3,000 mm Central storage compartment for wooden planks in the loading area 70 mm wooden planks for extension to 3,000 mm Lashing rings for low-loader (40 securing points) 1 pair of lashing cutouts indented in the front longitudinal beam (cranked zone), each rated for 10 t 4 pairs of lashing holes in the outer frame, each rated for 5 t (for tensioning straps) 7 pairs of lashing pins recessed in the top and side of the outer frame, each rated for 10 t 1 x at the front on the cranked zone 6 x in the low-bed First lashing ring 250 mm from front and last one max. 250 mm from rear; spacing between lashing rings not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm, convertible to 5 t ring lashing eyes 2 additional pairs of folding lashing rings, each rated for 10 t 1 x on the cranked zone (protruding) 1 x recessed in the floor behind the last axle Drawbar / Turntable coupling Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker balance) Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 anti-swap coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front, including connecting cable Make: Wabco, Knorr or Haldex Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin anti-swap plugs at the front, with connecting cable Nwsdpei Ri Dlofx Ak Sof 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning panels, LED illuminated and extendable to 3,000 mm Floor Front cranked section with steel / tread plate surface Storage box recessed in the ramp transition to cranked section Followed by 70 mm softwood floor, in wheel arch area with steel / tread plate surface Rear bevel with 70 mm softwood floor Low-loader area incl. rear bevel: 6,500 mm Loading Ramps Steel ramps, 2,800 mm length, 750 mm width, laterally adjustable Wooden inlay Hydraulically operated via tractor auxiliary drive with restrictor, operation on left side, FR Hydraulic connection with SVK coupling NW 10/3, including connecting hose Registration / Plates Country of registration: Germany 24/7 Service Hotline Prepared for two-line plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Warning panel according to ECE - 70 Paintwork Frame hot-dip galvanized including passivation 15-year warranty against rust-through Drawbar galvanized or black, manufacturer’s choice Ramps hot-dip galvanized Note! These are archive images!

Koşul: yeni, makine/araç numarası: 628cde0fe99cc2d3c8eaa8dd8, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Lowbed trailer chassis Steel welded construction Turntable with robust ball bearing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width rear splash guards Half-shell fenders on axle 1 with anti-spray mudflaps, anti-spray mudflaps behind axles 2 and 3 1 plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with a padlock (padlock not included) Nsdpfoi Ri Ddex Ak Sjwf Extendable widenings up to 3,000 mm Storage compartment for timber planks in the center of the loading area 70 mm timber planks for extension to 3,000 mm Lashing eyes for low loader (40 lashing points) 1 pair of lashing cutouts in the front longitudinal beam, recessed in the cranked area, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching lashing straps) 7 pairs of recessed lashing mushrooms on top and side of outer frame, each 10 t 1 front cranked area 6 in the lowbed deck First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 2 pairs of additional folding lashing eyes, each 10 t 1 located in the cranked area (protruding) 1 recessed in the floor behind the last axle Towing equipment for turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles (manufacturer’s choice) Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and tires 235 / 75 R 17.5 (manufacturer’s choice) Steel rims, dual configuration, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads front, with connecting lines to the tractor unit, ABS and ALB, with ABS plug front, with connection cable Brand: Wabco or Knorr Electric system 24 volt, multi-chamber lights, yellow LED side marker lights 2 white front position lights 2 white/red lane marker lights rear 2 x 7-pin non-interchangeable plugs at front, with connecting cable 1 LED rotating beacon light with bracket, switched via parking light (removable lamp) 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm Floor Front crank area with steel / chequer plate covering Toolbox recessed in the ramp bevel to the crank Then 70 mm softwood floor, steel / chequer plate covering in wheel arch area Rear ramp bevel with 70 mm softwood floor Lowbed loading area incl. rear ramp bevel: 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-covered With spring assist Country of approval / Number plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning board according to ECE-70 Painting Frame hot-dip galvanized incl. passivation 15-year warranty against corrosion Drawbar galvanized or black, as per manufacturer’s choice Loading ramps hot-dip galvanized Attention! These are archive images!

Koşul: yeni, makine/araç numarası: f8fb99947a1c19bc4d63549ff, boş ağırlık: 6 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 24 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing race Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flaps Half-shell fenders on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles 1 plastic tool box, with shelf, w=620/h=360/d=440 mm, lockable with padlock (padlock not included) Extendable widening to 3,000 mm (not at the rear chamfer) (the track width of machines or vehicles to be transported must not exceed 2,550 mm outer frame width) Central storage compartment for wooden beams on the loading area 70 mm wooden beams for widening to 3,000 mm Lashing points on low loader 1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated 5t 7 pairs of mushroom lashing points, recessed at top and side in outer frame, each rated 10t 1x at the front on the gooseneck 6x in the drop deck First lashing point 250 mm from front, last max. 250 mm from rear, distance between lashing eyes not greater than 1,100 mm 5 pairs of stake pockets recessed in side frame, internal dimension 70 x 40 mm (convertible for 5t ring lashing eyes, not included) 2 pairs of additional fold-down lashing eyes, each rated 10t 1x on the gooseneck (projecting) 1x recessed in the floor behind the last axle Trailer turntable drawgear Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (equalising rocker) Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice with M&S marking Steel wheels in twin arrangement, factory silver Brake System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connection lines to the towing vehicle ABS and ALB, with ABS connector at front, with connection cable Brand: Wabco or Knorr Note: This trailer may only be towed by vehicles which ensure the proper functioning of the ABS! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red rear outline marker lights 2 x 7-pin non-interchangeable plugs at front, with connection cable 1 LED rotating beacon with holder, switched via parking lights (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000mm Floor Gooseneck at front with steel/chequer plate covering Storage box recessed on the transition slope to gooseneck After that, 70 mm softwood floor, steel/chequer plate covering in wheel arch area Rear slope with 70 mm softwood floor Low-bed platform including rear slope 6,500 mm Nwjdpfx Aei Riwfjk Ssf Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety support, foldable underneath (prevents lateral slipping of the ramps, not in conjunction with hydraulic side ramp shift) Wooden inlay on ramps Spring lifting assistance Operating instructions At 10,000 kg axle load, an exemption permit is required, only indivisible loads possible!!! The stated total weight is technically possible; depending on the load, the gross weight may not be achievable while adhering to permissible axle, support, and kingpin loads. (Poor driving and trailing behaviour may result from incorrect load distribution) Country of registration/Plates Country of registration: Germany Approval according t

Koşul: yeni, makine/araç numarası: dc46d2e1cd272305b99fb3160, boş ağırlık: 9.800 kg, azami yük ağırlığı: 31.200 kg, toplam ağırlık: 41.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Nwodsi Ri Hcopfx Ak Sof Vehicle consists of: Chassis: Low-bed semi-trailer Steel welded construction, kingpin plate with replaceable 2-inch kingpin and two kingpin positions 24 t, 2-speed landing gear, operated from one side, with straight foot, without telescopic compensation Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Quarter-circle mudguards in front of and behind axle modules 1st pair of wheel recesses sunken into the low-bed loading area behind the gooseneck, bevelled for entry. Length at base approx. 1,600 mm, depth of recesses approx. 260 mm. Note! The frame is 260 mm higher than the wheel recess in the main beam area. 2nd pair of wheel recesses between axles A and B. Length at base approx. 350 mm, depth approx. 260 mm. Note! The frame is 260 mm higher than the wheel recess in the main beam area. If wheel loaders are to be transported and the total height needs to be checked, please provide the technical data sheet for the respective wheel loader types with precise dimensions (if total height is exceeded -> customer assumes risk, permit required); depending on ground clearance under the machines, inserts in the wheel recesses may be required on the customer's side. Wheel recess covers pull-out from the main frame, with wooden inlays. Extensions can be pulled out to 3,000 mm (not possible in rear slope area and not at the base of the wheel recesses) (track width of construction machines/vehicles to be transported must not exceed external frame width of 2,550 mm). Storage compartment for wooden planks on gooseneck, transverse at the front 70 mm wooden planks for widening to 3,000 mm Tie-down points on low-bed 2 pairs of ring lashing eyes, each 5 t, at the front on the gooseneck 11 pairs of lashing points (Zurrpilze) recessed into the top and side of external frame, each 10 t - 2x on gooseneck - 9x on low-bed deck (first eye 250 mm from the front, last max. 250 mm from the rear, distance between eyes not greater than 1,100 mm) 8 pairs of stanchion sockets recessed in the external frame, internal dimensions 70 x 40 mm, or alternatively 5 t ring lashing eyes recessed in the floor instead of sockets Axles + Suspension SAF drum braked axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Wheels and Tires 235 / 75 R 17.5 to manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line air brake system Spring-loaded parking brake EBS, electronic braking system with EBS socket at front, no connection cable Attention: The trailer may only be towed by tractors that ensure full ABS functionality! 2 non-interchangeable coupling heads at front, without connecting pipe With lifting & lowering valve Axle load detection via EBS CAN bus signal, for indication on the truck’s cab display – truck must be pre-equipped accordingly, not truck-installed (not certified as a weighing system) Vehicle stability control system Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connection cable 1 x LED beacon with bracket, controlled via parking light (rotating beacon detachable) 2 pairs of warning boards, double-sided, LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck with steel/checker plate covering Storage box integrated in inclined drive-over area to gooseneck - Then 70 mm softwoo

Koşul: yeni, makine/araç numarası: 3c70e9a5d82cfb3ada79baf95, boş ağırlık: 8 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 26 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 205 / 65 r 17,5, Further Information Chassis Semi-Trailer for Freight Forwarding Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, rear bevel to approx. 1920 mm, continuous hook-in profile for ramps at the rear and front on the gooseneck, wear rollers at the rear, lowered deck from the kink to the axle assembly. Drawing approval required from the customer upon placing the order! Pair of lashing mushrooms recessed on top and side of the outer frame, each 10 tons Pair of lashing rings recessed in the outer frame on the gooseneck, each 5 tons 24 t 2-speed landing gear, single-sided operation, with straight lower section, without lateral compensation Rear support foldable, mounted externally Chocks with holder Side underrun protection, aluminium Underrun protection, steel, for EU standards, if technically feasible Quarter-shell mudguards with anti-spray mud flaps to EU standards 1 pair of wheel recesses in the lowbed section after the gooseneck, recessed in the driving lane area, inclined for easier entry. Bottom length approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than wheel recess. Detailed technical evaluation required after order placement. Wheel recess covers extendable from the lowbed with hardwood inserts, on rear bevel with hardwood inserts. Electrical winch, 24 Volt, pulling force 5500 kg, mounted at gooseneck kink, not extending onto the loading area, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide roller at the rear bevel. Axles + Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto reset function Wheels and Tyres 205 / 65 R 17.5 tyres with 129/127K (132/132G) marking for 8 t tyre load capacity at max. 90 km/h manufacturer’s choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 foolproof couplings at the front, without interconnecting line EBS manufacturer: Haldex, electronic brake system with EBS socket at the front, without interconnecting cable (brake calculation sent to customer for approval, 15.07.2021) Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! Axle load detection via EBS CAN bus signal, for display via dashboard in the tractor unit, truck must be factory-prepared accordingly, not installed in truck (not a certified weighing system) Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without interconnecting cable Floor Gooseneck with steel / checker plate covering 30 mm phenolic plywood floor, in the lowbed between the main beams, center In the driving lane area, with serrated grating, in the wheel recesses with steel/checker plate covering. Ramps Pair of aluminium ramps, 3200 mm long, load capacity per pair 12,000 kg Nwsdpfx Aji Ri Hrsk Ssf Pair of steel ramps for access to the lowbed Pair of steel ramps for crossing onto the gooseneck Side Boards Registration / Plates Registration country: Germany with Dekra inspection and certificate (according to §13 EC-Vehicle Approval Regulation) Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, yellow on sides

Koşul: yeni, makine/araç numarası: Produktpalette, boş ağırlık: 14 kg, azami yük ağırlığı: 35 kg, toplam ağırlık: 50 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, lastik durumu: 100 yüzde, Further information Chassis: Low-bed semi-trailer Steel welded construction, fifth wheel plate with replaceable twin kingpins 24 t, 2-speed landing gear, single-sided operation, with straight lower section, without compensating device Foldable rear support 2x wheel chocks with holder Aluminium side underrun protection Quarter shell mudguards in front of and behind axle assembly Splash guards installed behind each axle 1x storage box, width: 2,350 mm x length: 730 mm x height: 640 mm, mounted transversely at the front on the floor of the gooseneck, with 2 storage trays Extensions extendable to 3,000 mm (not in rear bevel) (Note: Track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for wooden planks on gooseneck, mounted transversely at the front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess from above the rear axles to the rear, approx. 500 mm wide and approx. 230 mm deep Tie-down points, low-bed 3 pairs of 10 t lashing eyes at the front gooseneck, 8 pairs of 10 t lashing eyes in the low-bed section, 3 pairs of lashing rails in the track area of the low-bed, 3 pairs of 10 t lashing eyes in the axle/rear area Axles & Suspension SAF drum brake axles Axles/chassis laser-aligned to reduce tyre wear and fuel consumption With steering axle Air suspension Wheels and Tyres 235/75 R 17.5 Manufacturer's choice Steel twin wheels, factory silver Braking system 2-line compressed air brake system; colour-coded air lines for easy servicing Spring-loaded parking brake EBS (Electronic Braking System) with EBS socket at the front, without connection cable Note: This trailer may only be towed by towing vehicles which provide effective ABS functionality! 2 tamper-proof coupling heads at the front, without connection line With lift and lower valve, holding function in lowered position + auto-reset function Axle load detection via EBS CAN bus signal, for display in the cab (truck must be prepared accordingly, no installation in truck, not a calibrated scale) Vehicle stability system Trailer Info Center, for displaying vehicle data such as axle loads (not a calibrated scale), mileage and diagnostic/system messages Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white LED position lights at the front 2 white/red lane illumination lights at the rear 2 x 7-pin tamper-proof sockets at the front, no connection cable 1x additional LED work light at the rear, switched via reversing light 1x LED beacon with bracket, switched via parking lights (removable beacon) 2 pairs of warning panels, double, LED illuminated, extendable to 3,000 mm Floor Gooseneck with steel/checker plate covering In the track area with 70 mm softwood floor, in the wheel arch area with steel/checker plate covering; low-bed section left and right in the track area can be raised hydraulically via truck PTO Rear inclination with 70 mm softwood floor Low-bed length approx. 6,300 mm Side walls 25 mm aluminium hollow profile, 400 mm high, plug-in type at the front and sides of the gooseneck Nedpei Ri Hgofx Ak Sewf Access ramps Steel ramps 2,800 mm long, 750 mm wide, side-mountable

Koşul: ikinci el, azami yük ağırlığı: 28.410 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2012, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 700 mm, FLIEGL yan camlı ve 3 akslı dorse Yararlı yük: 28.410 kg Tip: SDS350 Fren: Disk fren Aks: BPW + Havalı süspansiyon 2x destek ayağı (JOST) Uzunluk: 13,60 m Genişlik: 2,40 m Yükseklik: 0,70 m Finansman/kiralama alanında da partnerlerimizle size memnuniyetle destek oluruz. Nwodpfx Akswgghns Sjf Tüm bilgiler garanti edilmez. Hata ve ara satış hakkı saklıdır.

Koşul: ikinci el, ilk tescil: 09/2016, renk: diğer, Üretim yılı: 2016, Donanım: ABS, = Diğer seçenekler ve donanımlar = - BPW dingilleri - Kaldırılabilir dingil - Davlumbaz frenler = Notlar = Fliegl, 2016, BPW dingilleri, Birinci dingil kaldırılabilir, Nodpsy Avafsfx Ak Sowf davlumbaz frenler = Firma bilgileri = Banka bilgileri: Rabobank Hesap No: 39.33.10.655 IBAN: NL73RABO0393310655 SWIFT kodu: RABONL2U - İşlemden önce banka bilgilerimizi mutlaka kontrol edin! - Araç rezervasyonu depozito olmadan mümkün değildir. - Tüm ilan edilen araçlarda yazım ve metin hataları yapma hakkımız saklıdır.

Koşul: yeni, Üretim yılı: 2026, Recirculating Chamber Furnace, electric, brand new, delivery time 12 weeks Nwedpfx Akslkb Ezj Ssf - Maximum temperature: 300°C - Internal dimensions (W x D x H): 1500 x 3000 x 2000 mm - External dimensions (W x D x H): 2410 x 3560 x 2730 mm - Capacity: 9000 liters - Eurotherm Nanodac controller, 100 programs with 25 segments each Additional 100 programs can be saved/loaded via FTP or USB stick - 2 circulation fans - Double doors with safety door sensors - Overtemperature protection, Eurotherm 3216i - Control/recorder with color touch display - Robust steel construction, exterior anthracite colored - Motorized dampers - Electrical version: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Entry rails, with recess for loading with a trolley - Documentation, CE declaration of conformity - Electrical wiring diagram with spare parts list We are happy to offer transport, installation, and staff training. As a new unit, also available with exhaust air fan and other configurations! Delivery time approx. 10 – 12 weeks. Contact us! We offer new and used industrial furnaces, which we can also convert and modify according to customer requirements. Viewing in our machinery hall possible by arrangement at any time. Furnace, furnaces, drying oven, industrial furnace, drying cabinet, heat oven, heating cabinet, recirculating oven, chamber furnace, heating chamber oven, recirculating chamber furnace, tempering furnace, annealing furnace.

Koşul: ikinci el, azami yük ağırlığı: 28.560 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2023, bir sonraki muayene (TÜV): 03/2026, yükleme alanı uzunluğu: 12.032 mm, yükleme alanı genişliği: 2.352 mm, yükleme alanı yüksekliği: 2.698 mm, yükleme alanı hacmi: 68 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2023, Donanım: ABS, FLIEGL 3-Axle Fixed Container Chassis with High-Cube 40 FT Container First registration: 2023 Permissible total weight (technical): 38,000 kg Chassis tare weight: 3,640 kg High-Cube container tare weight: 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle is a LIFT AXLE with traction aid Equipped with vehicle driving stability system Axle load detection 6x 385/55 R 22.5 tyres 40 FT high-cube container with the right side wall designed as doors (multi-wing), door dimensions L 2,340 x W 2,585 mm Rear portal doors Internal dimensions (LxWxH): 12,032 x 2,352 x 2,698 mm Volume: 68 cbm Fits 25 Euro pallets Accessible with pallet truck and forklift Nwedpsvzk Najfx Ak Sef Condition: A1 RENTING is the new BUYING – also available from us as full-service rental.

Koşul: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 6.817 kg, azami yük ağırlığı: 32.183 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 11/2015, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 385 65 r22,5, lastik durumu: 90 yüzde, Üretim yılı: 2015, Donanım: ABS, hidrolik arka platform, Dorse kullanıma hazırdır. Alttan katlanabilir 2,0 t kaldırma platformu Nwodpfx Aox Rupbjk Sjf 6 adet yeni lastik Çeşitli depolama kutuları, her iki tarafta Kullanım izleri için resimlere bakınız Konum: 13089 Berlin

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33802011324, boş ağırlık: 5.340 kg, azami yük ağırlığı: 29.660 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2021, yükleme alanı uzunluğu: 10.000 mm, süspansiyon: hava, lastik boyutu: 385 / 65 R 22,5", renk: gri, Üretim yılı: 2021, The images are archive photos; the vehicle may still be in use! Chassis: Semi-trailer for containers Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin 24 t, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight mounting plate, with sliding compensation, 2 wheel chocks with holders, aluminum side underrun protection, foldable steel rear underrun protection, half-shell mudguards with anti-spray flaps behind each axle 8 timber bolster frames (manufacturer's choice), each with 16 lashing eye-hook combinations, bolted to the frame, each with 2 telescopic timber stakes, extendable from approx. 2,000 to 2,800 mm, load capacity per pair 7 t Axles & Suspension SAF disc brake axles with 430 mm disc diameter, air suspension with raise & lower valve 1st axle automatic lift axle, additionally manually lowerable, can be operated via push button on the vehicle Wheels and Tires Nwedpfjwk Hcgsx Ak Sef 385/65 R 22.5", Athos drop-forged steel rims, factory silver Braking system 2-line compressed air brake system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure the ABS functions correctly! Vehicle Stability System, EBS 2S/2M Electrics 24 Volt, multi-chamber lights, side yellow LED lighting, 2 x 7-pin non-interchangeable sockets at the front, without connecting cable, 2 x reversing lights at the rear Front wall Steel/mesh front wall, approx. 2,300 mm high Approval / Plates Country of registration: Spain, type approval according to EC 2007/46, prepared for double single-line number plate holder 1 x plastic, 1 x stainless steel (interchangeable)

Koşul: yeni, makine/araç numarası: eca976917d325d4adc41b69e8, boş ağırlık: 7.200 kg, azami yük ağırlığı: 27.800 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r 22,5, Further information Chassis semi-trailer for freight forwarding High-strength fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, main frame reinforcement for 25 t at the center of gravity over 3 m loading length when retracted. 13 pairs of hooks for lashing strap attachment welded to the crossmembers 23 pairs of lashing rings recessed into the outer frame, each rated for 3.5 t Outer frame with load-lock profile for lashing strap attachment Note! Not usable with side walls! 24 t 2-speed landing gear in reinforced version for unhitching while loaded, single-sided operation, with semi-circular lower section and straight mounting plate, with thrust compensation Wheel chocks with holders Aluminum side underrun protection Rear underrun protection Half-shell mudguards With anti-spray mud flaps in accordance with EU regulations 1 spare wheel carrier for 1 spare wheel, with wheel fastening kit 1 stake storage box, closed at the sides, open at the top, below the loading area, doors on both sides, W=450 mm/H=400/420 mm/D=2460 mm 6 pairs of extendable stake pockets for square tube stanchions 80x80 mm, extendable from loading width 2000 mm to 3100 mm 4 pairs of stake pockets recessed in the outer frame for square tube stanchions 80x80 mm 11 stake pockets centrally recessed in the floor for square tube stanchions 80x80 mm, with reinforcement beams, installed between the outer stake pockets 5 x 3 pairs of stake pockets on the outer longitudinal beams for square tube stanchions 80x80 mm, including reinforcement beams – for load securing to the front and rear during transport of reinforcing steel mesh, 2x5000 mm or 2x6000 mm 6 lightweight plug-in stanchions W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized, top with cable guides for strap tensioning 12 lightweight plug-in stanchions W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized with lashing rings welded to both sides at the bottom Note: Stake pockets/plug-in stanchions are not designed for sole securement of long materials, pipes, etc. without additional lashing 2 plastic tool boxes, with drawer and shelf, W=650/H=520/D=670 mm, lockable with a padlock (lock not included) 6 reinforcing steel winches with wire cable and counter hook, with cable feed-through in the outer frame, 1 removable plug-in gearbox for reinforcing steel winches supplied loose (without frame mounting) Telescoping Main frame telescopic, extendable by max. 4000 mm and lockable at approx. every 500 mm Locking with pneumatic bolt locking + frame locking indicator on both sides, operation via manual button, control for brake/locking and suspension on driver’s side, ahead of the axles Storage compartment between longitudinal beams when extended Axles & Suspension SAF disc brake axles with 430 mm disc diameter Nwedpfx Asi Ri Szsk Sef Rear axle is self-steering, with automatic reverse lock via reversing light, with additional lock function on the trailer via hand button, and manual override in the tractor unit (pin 10), no truck installation required. Offset axle spacing mm Air suspension 1st axle with automatic lift, also electrically controllable from the truck, with starting aid, no truck installation required (starting aid functional up to 30% axle overload and max. speed of 25 km/h) Brake System 2-line compressed air brake system Color-coded line routing for easy servicing Spring-actuated parking brake 2 error-proof coupling heads at the front, without connectio

Koşul: yeni, makine/araç numarası: 207ad28f83705ed0d38a4f174, boş ağırlık: 3 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 14 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5, Further information Chassis Swap Central Axle Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers for 20-foot swap bodies, suitable for swap bodies 7.15 and 7.45 rear-flush (for 7.15 swap bodies, not rear-flush; forklift pockets/frame protrudes) Telescopic support leg at the front 1 pair of gearbox support feet at the front, with straight lower part and single-sided operation on the right (FR) Wheel chocks with holder Aluminium side underrun protection Steel rear underrun guard Half-shell mudguards Mounting for truck-mounted forklift at the rear, incl. 2 fork insertion pockets, 2 extendable support tubes, bracket for chain securing with locking pin. Rear underrun guard with light unit can be folded away. Includes 2 loose rubber pads to protect the rear panel; we recommend counterweight! Note: Partially low ground clearance with forklift, poor trailing behaviour possible, no guarantee! (Forklift self-weight up to max. 1,500 kg for trailers.) (With proximity switch for forklift control in conjunction with lift axle) The forklift mounting shifts the axles rearwards, pay attention to load distribution when driving without a forklift. Customer risk! (For swap body trailers, driving with forklift is only permitted in conjunction with a swap body.) Forklift mount adapted as per AU 203670 for 7.45m swap bodies Counterweight at the front between the frames, approx. 300 kg, if required, exact check still pending Drawbar equipment for central axle trailers Drawbar with approved 50 mm towing eye, forwarding edition (not suitable for trucks with tail lift, exact check still required when ordering) Undercoupler drawbar Drawbar without length adjustment Axles + Suspension SAF drum brake axles as per manufacturer's choice Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, colour-coded line routing for easier service Spring-loaded parking brake Duomatic connection at front, with connecting line to the tractor, on the left (FR) Duomatic connection at front, with connecting line to the tractor, connection on the right (FR) EBS, Electronic Braking System with EBS plug at the front, with connection cable, on the left (FR) Attention: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift & lower valve, holding function in each lift/lower position Vehicle - Drive stability system Wheels and Tyres 235/75 R17.5, brand as per manufacturer's choice Steel twin wheels, factory silver Electrics Njdei Ri Iajpfx Ak Sswf 24 Volt, 4 x 3-chamber tail lamps + 1 round reversing lamp + 1 round rear fog lamp, side yellow LED lighting, lights mounted protected! 2 white position lamps at the front 2 white/red lane marking lamps at the rear 1 x 15-pin connector at the front, with connecting cable, on the left (FR) 2 x 7-pin sockets at the rear left (FR) for truck-mounted forklift 1 x 15-pin socket at the rear left (FR) for truck-mounted forklift LED work lights on both sides behind the 2nd axle (switched via reverse light) Additional LED work light at rear, switched via reverse light Approval / Plates Germany With Dekra inspection and certificate (as per §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour markings with reflective tape as per ECE R 048, white on the sides and red at the rear Painting Frame DB

Koşul: yeni, makine/araç numarası: b50cac2c60a813b0968994fa0, boş ağırlık: 5.700 kg, azami yük ağırlığı: 18.300 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer - Steel welded construction - Turntable with robust ball-bearing slewing ring - Foldable rear support - 2 wheel chocks with holders - Full-width rear mudguards - Prepared for extension to 3,000 mm (holes in the outer frame, not in the rear bevel) Lashing Points Low-bed - 1 pair of lashing cutouts recessed at the front in the longitudinal beam at the gooseneck, each rated for 10t - 7 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated for 10t - 1x at the front on the gooseneck - 5x in the low-bed area - 1x in the rear bevel - 12 pairs of lashing holes in the outer frame, each rated for 5t (for tensioning strap hooks) - 5x gooseneck, 6x low-bed, 1x rear bevel Drawbar Hitch Turntable Trailer - Drawbar with tested 40 mm towing eye Axles & Suspension - Drum brake axles, manufacturer’s choice - Laser-aligned axles/chassis to reduce tire wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance) Wheels and Tires - 235 / 75 R 17.5 Fulda - Steel twin wheels, factory silver Brake System - 2-line compressed air brake system - Spring-loaded parking brake - 2 confusion-proof coupling heads at the front, connection lines to tractor vehicle - Connection lines approx. 60 cm extended - Without ABS, but with mechanical ALB, max. 60 km/h permissible Electrics - 12 volts, multi-chamber lights, no side yellow LED lights, side reflectors - 2 white position lights front - 2 white/red lane marker lights rear - 1x 7-pole 12-volt plug at the front, with connection cable, extended by approx. 60 cm - 1 LED beacon with bracket, switched via parking light (removable beacon) - 2 pairs of illuminated, extendable warning boards up to 3,000 mm Floor - Gooseneck front with steel / checker plate covering - Toolbox recessed into drive-over slope at gooseneck - Then 70 mm softwood floor, with steel / checker plate covering in wheel arch area - Rear bevel with 70 mm softwood floor - Low-bed platform including rear bevel: 5,900 mm Loading Ramps - Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable - Wood covered - Supported by spring assist Nwsdpfx Asi Ri Agek Sef Operating Instructions - For 10,000 kg axle load, a special permit is required; only indivisible loads permitted! - The specified total weight is technically possible; depending on the load, the permissible axle/support/saddle loads may not be achieved (poor tracking and maneuverability possible due to improper load distribution) Country of Registration/Plates - Country of registration: Germany - With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (for Switzerland, max. 40 km/h possible) - Prepared for two-line license plate holder - No ECE R 048 compliant contour marking / reflective strips Paintwork - Frame: DB 7350 Novagrau - 10-year warranty against rust-through - Drawbar galvanized or black, manufacturer’s choice - Loading ramps hot-dip galvanized Note: Archive images!

Koşul: yeni, makine/araç numarası: 7dbf076fea9ec110acb399f8f, boş ağırlık: 5 kg, azami yük ağırlığı: 32 kg, toplam ağırlık: 38 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/55 r22.5, Further information Chassis: semi-trailer container Fine-grained steel welded construction, fifth wheel plate with replaceable kingpin and two kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft or 1 x 30 ft flush with rear Center telescope 1st stage, rear extension extended to 1st stage: 2 x 20 ft or 1 x 40 ft with or without gooseneck tunnel Center telescope 2nd stage, rear extension extended to 2nd stage: 1 x 45 ft with gooseneck tunnel, with rear overhang Center telescope 2nd stage, front extension extended to 1st stage, rear extension extended to 2nd stage: 1 x 45 ft with long gooseneck tunnel and chamfered corners Center telescope as overlapping central tube frame with locking pin, with adjustable rear height and folding center supports for containers without tunnel Plug-in and removable front container guides (electrics, air, and brake connectors located at the front crossmember) Plug adapter for front lock, for securing containers without tunnel from underneath, with holder for when not in use Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) Rear extension mounted on rollers, operated by hand crank 24 t 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation 2 wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, galvanized steel Extendable rear underrun protection for 45 ft containers Half-shell mudguards with EU-compliant anti-spray flaps Rear impact guard Axles & Suspension SAF disk brake axles with 430 mm disc diameter Axles/chassis laser-measured to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44t gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and start assist, activation by 3x braking (start assist operative up to 30% axle overload and up to a speed of max. 25 km/h) Braking system 2-line compressed air brake system, color-coded routing for easy service. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 non-interchangeable coupling heads at front, without connection line EBS, Electronic Braking System with EBS socket at the front, no connection cable Note: The trailer may only be towed by tractors that ensure the ABS functionality! With raise and lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, display in driver's cab, truck must be appropriately pre-equipped, no truck installation (not legal-for-trade scale) Wheels and Tires 385/55 R22.5, brand at manufacturer's discretion Steel rims, factory silver Electrics 24 volts, multi-chamber lights, rear and brake lights in LED, side yellow LED lighting (Note: With certain tractors, error messages may appear even if all functions operate properly.) 2 white position lights at front 2 white/red lane marker lights at rear Nwedpfx Akei Ri R Ss Sof 2 x 7-pin non-interchangeable sockets at front, without connection cable Operating instructions When transporting 45 ft container with short tunnel, with or without front extension, the permitted system length from kingpin to end of vehicle and the total train length of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Registration country / plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plates

Koşul: yeni, makine/araç numarası: 1f4581c873ed977cb9602039b, boş ağırlık: 3 kg, azami yük ağırlığı: 34 kg, toplam ağırlık: 38 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further information Chassis Semi-Trailer Container Fine-grained steel welded construction; fifth wheel with replaceable 2-inch kingpin Container mountings: 1 x 20-foot central position (or swap body container 7.15 / 7.45 m), front not retractable, container lock twist locks in extended version 24 t two-speed landing gear, single-sided operation, with straight base, without stroke compensation 2 wheel chocks with holders Side underrun protection Aluminum rear underrun protection Half-shell mudguards With anti-spray mud flaps according to EC Stainless steel drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, incl. drip plate, with perforated step plates, approx. 400 mm wide, left & right between drip tray and longitudinal beam 4 hose trays approx. 4500 mm long (hose box) for pipe diameters: 2 x DN 200 externally + 2 x DN 160 centered, rear hose box (stainless steel) 300 mm deep, splash-proof, cover (stainless steel) all-around with rubber seal, drain hole at the lowest point, then without cover on hose pipes 1 stainless steel grounding lug at the rear in FR-right on the frame, with international grounding label on the frame Nodsi Rixkspfx Ak Sowf Access steps rear right on the underrun protection, rear in FR-right outside on the main beam step plate approx. 260 mm long and 300 mm wide Axles & Suspension SAF disc brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Axle spacing offset mm (Combined Transport) up to 44 t gross train weight Air suspension 1st axle with automatic lift axle, including forced lowering and start-assist, operation via 3 x braking (start-assist active up to an axle overload of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Color coded piping for easy servicing Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, no connecting cable Note: The trailer may only be towed by tractor units that ensure ABS functionality! With raise/lower valve Vehicle - dynamic stability control system Axle load detection via EBS CAN bus signal, for display in the driver’s cab, truck must be appropriately pre-equipped, no truck installation (no calibrated weighing system) Wheels and Tires 385/65 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin socket at the front, no connecting cable Operating notes The stated gross weight is technically possible, but depending on the cargo, the gross weight cannot always be reached while adhering to permissible axle, support and fifth wheel loads (poor handling and tracking may occur due to incorrect load distribution) This vehicle may only be loaded with 20’ tank containers conforming to ISO 668 and especially ISO 1496-3! The tank containers must have end-load-transfer areas (end transverse beam load transfer zones)! Country of registration / License plates Germany Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning plate according to ECE - 70 ADR approval according to section 9.1.1.2 of the ADR, EX/II, EX/III / type approval for vehicles for the carriage of certain dangerous goods (ex.B3) with warning plate at the rear, not valid for substances under UN 0331 and 0332 (explosives B-E) Outline marking

Koşul: ikinci el, azami yük ağırlığı: 28.933 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2015, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 3.000 mm, yükleme alanı hacmi: 101 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Donanım: ABS, * Edscha sürgülü tavan * Haldex EBS, ABS, LSV * Kaldırma aksı * Takım sandığı * BPW Eco Plus disk frenli dingiller ----* Lastik ebatı: 385/55R19,5 * Toplam uzunluk: 13.850 mm * Boş ağırlık: 6.067 kg * TÜV & SP: Süresi dolmuş -----Hatalar ve ara satışlar saklıdır Araç numarası: 5726 WhatsApp desteği mevcut! Araçla ilgili sorularınız veya daha fazla bilgi için bizimle WhatsApp üzerinden rahatça iletişime geçebilirsiniz Whatsapp Whatsapp Njdpfx Akevhvcfs Sjwf

Koşul: ikinci el, azami yük ağırlığı: 28.933 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2015, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 3.000 mm, yükleme alanı hacmi: 101 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Donanım: ABS, * Edscha kayar tente tavan * Haldex EBS, ABS, LSV * Takım sandığı * BPW Eco Plus akslar, disk frenli ----* Lastik ebatı: 385/55R19,5 Nwsdovhv H Ropfx Ak Sof * Toplam uzunluk: 13.850 mm * Boş ağırlık: 6.097 kg * TÜV & SP: süresi dolmuş -----Hatalar ve ara satış hakkı saklıdır Araç numarası: 5732 WhatsApp desteği mevcuttur! Araçla ilgili sorularınız veya daha fazla bilgi için lütfen bize WhatsApp üzerinden rahatça yazın. WhatsApp WhatsApp