Kullanılmış Fliegl Fliegl Tsk 100 4,5M satın al (24.480)

Durumu: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 2.860 kg, azami yük ağırlığı: 7.040 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tilt bearing Front gearbox support leg Rear foldable support 2 wheel chocks with holders Steel underrun protection Full-width rear mudflap (not in conjunction with forklift holders) Quarter-shell mudguards Lockable storage compartment for loading ramps underneath the loading platform 1 pair of ramps, 3,000 mm long, 360 mm wide, load capacity per pair 4,000 kg (ramp mounting bar at the rear) Central axle trailer towing mechanism Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles and Suspension GFA or BPW axles according to manufacturer's choice, with tapered roller bearings and S-cam brakes Axle/chassis laser alignment for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load compensation (rocker compensation) Wheels and tyres 235 / 75 R 17.5 as per manufacturer's choice Steel rims, factory silver Lsdpji Ri Eisfx Ak Sjrk Braking system 2-line air brake system, colour-coded piping for easy servicing. Manual spindle parking brake Integral air reservoir ABS and ALB, with ABS plug at the front, including connection cable, Caution: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! 2 tamper-proof coupling heads at the front with connection lines to the tractor unit, Electrics 24 volts, multi-chamber lights, side-mounted yellow LED lighting 2 white position lights at the front 2 white/red lateral marker lights at the rear 2 x 7-pin tamper-proof plugs at the front with connection cable, Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinders up to max. 170 bar, without throttle. If required, this must be retrofitted to the truck. Hydraulic connection with SVK connector NW 10/3, incl. connecting hose Operation hydraulically via truck PTO Tipper body Sturdy tipper body with 4 mm steel sheet floor, steel drop sides, seamless side walls, foldable and non-pendulum mounted without central locking at the bottom. Rear corner posts insertable. Tailgate foldable and pendulum-mounted, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2,420 mm 5 pairs of lashing eyes in the floor, each rated at 5 tonnes Operating Instructions The specified gross weight is technically feasible, however, depending on the load, it may not be possible to reach the gross weight while adhering to the permissible axle, support, and king pin loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration/plates Country of registration: Germany With Dekra inspection and report (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective stripes according to ECE R 048, white on sides and red at rear Painting Frame hot-dip galvanized incl. passivation, 15-year warranty against rust-through Side walls/body RAL 9010 pure white Note! Inner body only primed if a painted version is ordered! Attention! These are archive images. Also IMMEDIATELY available with 5 m body!

Durumu: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT21201011556, boş ağırlık: 3.300 kg, azami yük ağırlığı: 8.200 kg, toplam ağırlık: 11.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 450 mm, süspansiyon: çelik, lastik boyutu: 235/75 r17,5, renk: kırmızı, The images are archive photos; the vehicle may still be in use! Further Information: - Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing - Gear support foot at the front, foldable rear support, 2 wheel chocks with holder, steel underride guard, mudflap across full rear width, quarter shell fenders, spare wheel (same make as main tyres), steel rim, loose, 1 plastic toolbox with removable shelf (dimensions: w=620/h=360/d=440 mm), lockable with padlock (padlock not included). Note: In the folded-down position, the sideboard touches the storage box. - Lockable storage compartment for loading ramps beneath the cargo bed, 1 pair of aluminum ramps, length 3,000 mm, width 360 mm, load capacity per pair 8,000 kg (ramp mounting rail at rear) - Drawbar with certified 40 mm towing eye, height-adjustable via spindle, max. adjustment range 300 mm - BPW drum brake axles, axles/chassis laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bushings and mechanical load equalization (rocker balancing) - 2-line compressed air braking system, color-coded lines for easy servicing. - Hand spindle parking brake, integral air reservoir, ABS and ALB, with ABS socket at front, complete with connecting cable. Note: The trailer may only be towed by vehicles capable of supporting ABS functionality. 2 non-interchangeable coupling heads at the front, with connecting hoses to the tow vehicle. - 24 volts, multi-chamber lights, yellow LED side lighting, 2 white position lights at the front - 2 white/red marker lights at the rear, two 7-pin non-interchangeable sockets at the front, with connecting cable - Three-way tipper body, hydraulic multi-piston press with lift limiter and safety cable, low-pressure cylinder up to max. 170 bar, without throttle (to be retrofitted to the truck if required). Hydraulic connection SVK coupling NW 10/3 with hose included - Actuation hydraulically via truck PTO - Robust tipping platform with 4 mm steel floor plate, steel sideboard construction, continuous sides, fold-down and swing-mounted with lower central locking. Removable rear corner posts. Rear wall fold-down and swing-mounted with lower central locking. - Platform length approx. 5,000 mm, side walls with 6 lower hinges, platform width 2,420 mm - 5 pairs of lashing rings in the floor, each rated at 5 tons Lredpfx Akslhpzvj Sjk Country of registration: Germany, with Dekra inspection and certificate (as per §13 EC-FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective tape according to ECE R 048 (white on the side, red at rear)

Durumu: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT21201012268, boş ağırlık: 3.240 kg, azami yük ağırlığı: 8.560 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2022, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, lastik boyutu: 235/75 r17,5, renk: yeşil, işletme ağırlığı: 3.240 kg, Further information Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tip bearing, gearbox support foot at the front, foldable rear support, wheel chocks with holders, steel underrun protection, rear mudflap covering the full width (not available with forklift holder), quarter shell mudguards, spare wheel, same brand as main tyres, steel rim, loose, plastic toolbox with shelf, width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (lock not included). Note: Dropside contacts the storage box when folded down, lockable storage compartment for loading ramps underneath the loading area, pair of aluminium ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg (mounting rail for ramps at the rear). Drawbar with certified 40 mm towing eye, height adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axles/chassis laser aligned to reduce tyre wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle-load compensation (rocker balancing) 2-line compressed air brake system, colour-coded piping for easy servicing, manual spindle parking brake. Integral air reservoir, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by tractors that guarantee the effectiveness of the ABS. Duomatic coupling at the front, with connecting line to the tractor unit. Lredpfek E Tdasx Ak Ssk 24 Volt, multi-chamber lights, side marker LEDs in yellow, 2 white position lights at the front, 2 white/red track markers at the rear, 1 x 15-pin plug at the front, with connecting cable. Three-way tipper system, hydraulic multi-piston press with stroke limiter and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, throttle to be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, including connecting hose; operation hydraulically via truck PTO. Sturdy tipping platform with 4 mm steel plate floor, steel dropside body, continuous sidewalls, foldable and pendulum-mounted with central bottom lock. Removable rear corner posts. Tailboard foldable and pendulum-mounted, with central bottom lock, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Dropside return springs (not available with split sidewalls), platform width 2,420 mm, pair of lashing eyes in the floor, each rated at 5 tonnes. Operating instructions: The stated gross weight is technically possible; depending on the load, the gross weight may not be achieved while complying with permissible axle, support, and kingpin loads. (Poor driving and trailing behavior possible due to improper load distribution) Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG-FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear.

Durumu: yeni, Dış mekan kullanımı için sıcak daldırma galvanizli palet rafları Veriler : - H : yaklaşık 450 cm - D : yaklaşık 110 cm - L : yaklaşık 100,16 koşu metre - Yük: 3000 kg raf yükü - Sıcak daldırma galvanizli stand - Çapraz kirişler 270 x 14 x 5 cm, T30 - Sıcak daldırma galvanizli çapraz kirişler - Yeni BLT / PR45 FVZ - Avrupa'da üretilmiş ve güncel DIN EN 15512 standardına göre test edilmiştir. - 100 kalite ve en iyi fiyat. Raflar şunlardan oluşur: - 037 x dikme yaklaşık 450 cm x 110 cm, önceden monte edilmiş. - 144 x çapraz çubuk yaklaşık 270 x 14 x 5 cm, T30. - 288 x kilitleme pimi. - 288 x M8 x 20 kilitleme vidası, somun dahil. - Seviyeler: Zemin + 2 - 324 palet alanı, zemin alanları dahil. -- BIRKAÇ KEZ HEMEN KULLANILABILIR-- Fiyat : 19.900 € net artı yasal olarak geçerli KDV. KDV'nin gösterildiği bir fatura alacaksınız. Nakliye : Teslimat, talep üzerine ortak nakliye şirketimiz tarafından gerçekleştirilir, bunun için maliyetler posta koduna bağlıdır. Lrjdpsy D R Utofx Ak Sok Montaj : Gerekirse, eğitimli personelimiz iş ekipmanınızın profesyonel montajı ve demontajı konusunda size yardımcı olmaktan mutluluk duyacaktır. Bizim tavsiyemiz : Neye ihtiyacınız olduğunu bize bildirin... Planlama ve siparişten kuruluma kadar projelerinizi gerçekleştirmenize yardımcı olmaktan mutluluk duyacağız. Müşteri notu : Kilitleme pimlerini / kilitleme vidalarını takarken, sıcak daldırma galvanize yapıştırılmış deliklerin yeniden delinmesi gerekebilir. Ne yazık ki, yüksek kaliteli sıcak daldırma galvaniz ile bu durum göz ardı edilemez. Herhangi bir sorunuz varsa lütfen bizimle iletişime geçin.

Durumu: kullanılmış, makine/araç numarası: WFDFLT21001012243, boş ağırlık: 2.500 kg, azami yük ağırlığı: 8.000 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2022, lastik boyutu: 235/75 r17,5, Üretim yılı: 2022, Further Information Chassis Central Axle Trailer Low Bed Fine-grain steel welded construction, gearbox support leg at the front, telescopic rear support, wheel chocks with holders, steel sheet mudguards over both wheels Central Axle Trailer Coupling Drawbar with certified 40 mm towing eye, height-adjustable via spindle (max. adjustment range 250 mm) Axles & Suspension Euro axles (as per our selection) with tapered roller bearings and S-cam brakes, laser-measured axles/chassis to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker equalizer) Brake System 2-line compressed air brake system, spring-loaded parking brake, two non-interchangeable coupling heads at the front with connection lines to the towing vehicle, ABS and ALB, ABS connector at the front, with connecting cable Note: The trailer may only be towed by vehicles which guarantee the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, side-mounted yellow LED lighting, 2 white position lights at the front, 2 white/red lane marker lights at the rear, 1 x 15-pin plug at the front with connecting cable Deck TTS Low-profile steel tub, deck floor with steel/chequer plate covering, steel sides solidly welded to the floor, deck length 5,500 mm, front and side walls with load-lock profile for securing straps (8 front, 16 per side) Note: Slight floor corrugation may occur due to welding distortion! Pair of lashing rings, 1 x front in the corners of the steel tub and 1 x at the rear in the floor, each rated at 5 t. Additional pairs of lashing rings in the floor, each rated at 5 t. Lrjdsqmc Raspfx Ak Sek Ramps Steel ramps, 2 x 3,000 mm long, 510 mm wide, laterally adjustable, with handgrip, timber overlay, gas pressure springs for single-person operation Operating Instructions The specified gross weight is technically achievable; depending on load type, the gross weight may not be attainable while observing the permissible axle, support and fifth wheel loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany, with Dekra inspection and test report (in accordance with §13 EC-FGV), prepared for single-line licence plate holder, contour markings with reflective tape in accordance with ECE R 048, white on the sides and red at the rear.

Durumu: yeni, makine/araç numarası: 06b624786df9f4b5c196a36b0, boş ağırlık: 3 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 14 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 285 / 70 r 19,5, Further information Chassis Central-Axle Tipping Trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing 2-speed mechanical support leg at the front Foldable rear support Wheel chocks with holders Steel underrun protection Rear mudflaps along the entire width Ljdpfx Akei Ri Ipe Serk Quarter-shell mudguards Lockable storage compartment for loading ramps underneath the loading area Central axle drawbar system Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension SAF drum brake axles Axles/chassis laser aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and Tires 285 / 70 R 19.5, manufacturer’s choice Steel rims, factory silver Brake System 2-line pneumatic brake system Spring-loaded parking brake 2 misconnection-proof coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, including connecting cable Electrics 24 Volt, multi-chamber lamps, side-mounted yellow LED lighting 2 white position lamps at the front 2 white/red lane-keeping lamps at the rear All lighting in LED design (Note! With certain towing vehicles, malfunction warnings may occur even when lights are functioning correctly) 1 x 15-pin plug at the front with connecting cable Hydraulics Three-way tipping gear, hydraulic multi-piston press with lift limiter and safety cable Low-pressure cylinder up to max. 170 bar, without restrictor. If necessary, this must be retrofitted to the truck. Operated hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, including connecting hose Tipper Bodies Robust tipping body with 4 mm steel floor, steel drop-side construction, continuous side walls, drop and swing-mounted with central locking at the bottom. Rear corner stanchions removable. Tailgate drop and swing-mounted, with central locking at the bottom. Load bed length approx. 5,000 mm, side walls with 6 hinges at the bottom. Drop-side return springs (not possible with split side walls) Rear wall swinging and as double-leaf door (non-folding), with door holder and side protection rubber Load bed width: 2,420 mm 5 pairs of lashing eyes in the floor, each for 5 tonnes Registration/Country Plates Country of registration: Germany With Dekra inspection and certification (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized including passivation, 15-year warranty against rust-through Side wall/bodywork RAL 3002, Carmine Red Note: Bridge interior only primed! Note: Archive images!

Durumu: yeni, makine/araç numarası: dd98a7658922be8f2e25bcadb, boş ağırlık: 2 kg, azami yük ağırlığı: 8 kg, toplam ağırlık: 10 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r 17,5, Further Information Chassis Central Axle Low Loader Trailer Fine-grain steel welded construction Telescopic support leg at the front Telescopic rear support 2 wheel chocks with holders Steel fenders over both wheels Central axle trailer coupling system Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Lredei Ri Ebepfx Ak Sjk Axles & Suspension Euro-axles of our choice, with tapered roller bearings and S-cam brakes Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and Tires 235 / 75 R 17.5 as per manufacturer's selection Steel rims in factory silver Braking System Dual-circuit compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to towing vehicle ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that can ensure the functionality of the ABS! Electrics 24 Volt, multi-chamber lights, side yellow LED marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin, non-interchangeable connectors at the front, with connecting cable Platform TTS Low-profile steel trough, platform floor with steel/chequer plate covering, steel walls solidly welded to the floor Platform length 4500 mm Trough front and sides with load-lock profile for lashing strap attachment (8 points at the front, 12 per side) Note: Slight floor waviness due to welding distortion possible! 2 pairs of lashing rings, 1 pair at the front corners of the steel trough, 1 pair at the rear in the floor, each rated to 5 tons 2 additional pairs of lashing rings in the floor, each rated to 5 tons Loading Ramps Steel ramps, 2300 mm long, 510 mm wide, laterally adjustable with handle on the ramps Wooden surfaces Gas spring assist for single-person operation Operating Instructions The specified total weight is technically feasible; depending on the load, the total weight may not be achievable while observing permitted axle, support, and kingpin loads. (Poor driving and tracking behavior possible due to improper load distribution) Country of Registration/Plates Country of registration: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white at the sides and red at the rear Paintwork Frame RAL 3002 Carmine Red Loading ramps hot-dip galvanized Note: Archive images!

Durumu: yeni, makine/araç numarası: bdf30cb8a53c70e900bdb40a7, boş ağırlık: 2 kg, azami yük ağırlığı: 9 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: -, Further Information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing support Gear support leg at the front 2 wheel chocks with holder Steel underrun protection Full-width rear mudflap Quarter-shell mudguards Lockable storage compartment for loading ramps beneath the loading platform Central axle trailer towing device Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + Suspension BPW drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load balance (rocker balance) Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims factory silver Braking System 2-line air brake system, colored lines for easy servicing. Manual spindle parking brake Integrated air reservoir ABS and ALB, with ABS plug at the front and connection cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! 2 foolproof coupling heads at the front, with connection lines to the truck Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin foolproof plugs at the front, with connection cable Hydraulics Three-way tipper system, hydraulic multi-piston ram with lift limiter and safety cable Lrsdpfx Aksi Riwie Sok Low-pressure cylinder up to max. 170 bar, no restrictor. If needed, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Operation hydraulically via truck PTO Tipping Platform Sturdy tipping platform with 4 mm steel floor, steel side walls, continuous side panels, drop-down and pendulum-mounted with central locking at the bottom. Removable rear corner posts. Rear wall drop-down and pendulum-mounted, with central locking at the bottom. Platform length approx. 4,500 mm, sidewalls with 5 hinges at the bottom. Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated 5 tons Operating Instructions The stated total weight is technically feasible; depending on the load, the total weight may not be achievable while observing permissible axle, support, and saddle loads. (Poor handling and tracking may result from incorrect load distribution) Registration/Country of Origin/Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Conspicuity marking with reflective strips according to ECE R 048, white on sides and red at the rear Paintwork Frame hot-dip galvanized including passivation 15-year warranty against rust-through Sidewall/platform RAL 3002 Carmine Red Rear support, loading ramps, and toolbox optionally available at an extra charge Note: Archive images

Durumu: mükemmel (kullanılmış), GARANT (Hoffmann Group) markasının profesyonel tutucuları. Model 300230 6 SK40-6-100 – bağlama çapı Ø6 mm, uzunluk 100 mm. • SK40 konik – CNC standardı • Bağlama çapı Ø6 mm • Tutucu uzunluğu 100 mm • Maksimum devir hızı 25.000 dev/dak • Yüksek hassasiyet ve sıkı tutuş stabilitesi • Kullanılmış, çalışır durumda, kullanıma hazır. -- FİYAT 1 ADET İÇİNDİR -- Ljdpjw Sy D Ejfx Ak Serk

Durumu: yeni, makine/araç numarası: 074630ca1b8dc2d710f82c15a, boş ağırlık: 3.980 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis Semi-Trailer Tipper Fine-grained steel welded construction in lightweight design, kingpin plate with interchangeable 2-inch kingpin Patented curved front wall Without landing leg Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard brackets with stone-repellent surface Tow hook at the rear Axles & Suspension SAF disc brake axles Axles/chassis laser aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, activation with triple brake application (starting aid is functional up to 30% axle overload and up to a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism with 10 years’ warranty against corrosion Brake System 2-line compressed air braking system, color-coded line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With lift and lowering valve Vehicle driving stability system Wheels and Tyres 385/65 R22.5, make at manufacturer’s discretion Polished aluminum rim, make at manufacturer’s discretion Electrics 24 volt, multi-chamber lights, LED side marker lights (amber) 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupler, fixed part, NW 48 mm (without hose connection) Operated hydraulically via PTO on truck Body Aluminum box-body, made of high-quality, wear-resistant material; front wall 5 mm thick, with external end walls made of 30 mm hollow chamber profiles, precisely welded, with top rail profile deflecting loose material. Inside: ladder/access at front wall (not for use with Cramaro). External holder for shovel and broom at the front wall. Greenline – conical and aerodynamic body design Membrane-type rear wall Rear wall as pendulum flap with double joint hinge, mounted externally with double hook locking Rear wall with rubber seal (Note: Heat resistant up to 170°C max!) Continuous floor 5 mm thick, Brinell hardness 110 Note: Only suitable for the transport of sand, gravel, and round gravel with max. grain size 20 mm! All other transported goods are excluded from warranty! Standing platform with access, connection plate for air/electric and brake with large clearance for optimal operation Sliding tarp, single-sided folding to FR-right, with central locking in FR-left Operating Instructions For transportation of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material corrosion and rusting. The stated total weight is technically possible; depending on the load, the total weight may not be achievable due to permitted axle, support, and fifth wheel loads. (Poor driving and tracking behavior possible with incorrect load distribution.) Revolution Link: Revolution Link User Review: Registration Country / Plates Germany With DEKRA inspection and certificate (acc. to §13 EC-FGV) 24/7 Service hotline Prepared for single-line license plate holder Lrodpfxei Ri H Sj Ak Sjk Conspicuity marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau Body: R

Durumu: yeni, makine/araç numarası: 357314e4e176f8758d11ba42b, boş ağırlık: 4.500 kg, azami yük ağırlığı: 30.500 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis Semi-Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Curved front wall patented telescopic support centrally mounted, uncoupling while loaded not possible; when uncoupled, the vehicle must be positioned with a rear tilt. 2 wheel chocks with holders collapsible underrun protection half-shell mudguards integrated mudguard holder with stone-repellent surface equipped with anti-spray mud flaps only on the rearmost axle 1 tarp rod with holder 2 tow hooks at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter axle/chassis laser measurement to reduce tire wear and fuel consumption axles in off-road version, air suspension 1st axle automatic lift axle, including forced lowering and start-up aid, activated by 3x brake application (start-up aid operates until axle overload exceeds 30% and up to a maximum speed of 25 km/h) Lrsdei Ri R Iepfx Ak Sek hot-dip galvanized lift axle mechanism, 10-year corrosion warranty Braking System 2-line compressed air braking system, color-coded piping for easy servicing. spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors capable of ensuring proper ABS functionality! with raise & lower valve Vehicle stability system Automatic tipping lowering with shut-off valve Wheels and Tires 385/65 R22.5, make at manufacturer's discretion steel rims, factory silver Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lamps at front 2 white/red outline marker lamps at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupler, fixed part, nominal width 48 mm (without hose connection) hydraulically operated via truck PTO tipper bodies aluminum box body made from high-quality, wear-resistant material, front wall 5 mm thick, with external side walls of 30 mm hollow-chamber profiles, neatly welded, with bulk material-repellent upper rail profile. Internal access steps on front wall (not in conjunction with Cramaro). External scoop and broom holder on front wall. Greenline – conical and aerodynamic body design Membrane – rear wall Rear wall as pendulum flap with dual-hinge, externally mounted with double hook locking. Rear wall with rubber seal Note! Heat resistant up to max. 170°C! Floor 6 mm throughout Platform with access, connection plate for air/electrics and brakes, providing ample space for optimal operability. Roll tarp deposited on passenger side, with central locking on driver’s side Operating Notes For transporting salt, lime, etc., we recommend a tipper cylinder with a hard-chromed piston rod to prevent damage and corrosion by the material. The specified gross weight is technically feasible; depending on cargo, the gross weight may not be achieved within the permissible axle/support and fifth wheel loads. (Poor driving and tracking behavior may result from incorrect load distribution) Approval / Plates Germany Approval per EC 2007/46 24/7 service hotline preparation for single-line license plate holder contour marking with reflective tape per ECE R 048, white sides and red rear

Durumu: kullanılmış, Üretim yılı: 2014, Endüstriyel Robot Üretici: Kuka Model: KR210 R3100 ultra, 4,5 m lineer eksenli Üretim Yılı: 2014 Erişim Mesafesi: 3.196 mm Ağırlık: 1.154 kg Taşıma Kapasitesi: 210 kg Lrsdpfsxuwlwex Ak Sjk Kuka Kontrol Ünitesi KRC4 Üretim Yılı: 2014 Ağırlık: 163 kg Yazılım: KSS 8.5.4 Kuka TouchPad KCP4 Kuka bağlantı kabloları Kuka Lineer Eksen Model: KL1500-3 T Üretim Yılı: 2013 Uzunluk: yaklaşık 4,5 m Seyahat Mesafesi: yaklaşık 3,5 m Kablo taşıyıcı KRC4 Ağırlık: 2.200 kg ä17426

Durumu: kullanılmış, azami yük ağırlığı: 1.979 kg, toplam ağırlık: 2.700 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2026, yükleme alanı uzunluğu: 3.070 mm, yükleme alanı genişliği: 1.530 mm, yükleme alanı yüksekliği: 350 mm, toplam genişlik: 1.660 mm, toplam yükseklik: 660 mm, A39 GW26GA00010, STEMA üretimi, model ROCKO II SHRK .2, geri devirme römorku, Toplam ağırlık: 2.700 kg, 2022 model, kendi frenli, yüksek yükleyici, alüminyum yan duvarlı, hidrolik devirmeli geri devirme römorku, arka sarkaç kapaklı. Hatalar ve ara satış hakkı saklıdır. Lredpfxeyn Ucue Ak Sok

Durumu: yeni, Üretim yılı: 2025, yük kapasitesi: 10.000 kg, kaldırma yüksekliği: 4.500 mm, yakıt türü: elektrikli, direk tipi: dupleks, inşaat yüksekliği: 3.750 mm, pil kapasitesi: 808 Ah, batarya voltajı: 80 V, çatalların uzunluğu: 2.400 mm, boş ağırlık: 15.186 kg, Donanım: kabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically overhauled according to FEM-4.004 and current safety standards – ensuring maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics – each vehicle is thoroughly inspected and reconditioned. ? Made in Germany – with responsibility and precision ? Rigorous technical inspection ? 400+ vehicles available ? Worldwide shipping & customs processing ? Service & spare parts at fair prices ? Personal support – even after the sale Test and get advice on-site now – we’ll find the right solution for you. Industrial truck specifications: - Manufacturer: Heli - Model: Counterbalance Forklift CPD100-G3-4 - Drive type: Electric - Load capacity: 10,000 kg - Year of manufacture: 2025 - Operating hours: 0 - Lifting height: 4,500 mm - Mast type: Duplex - Free lift: No - Overall height: 3,750 mm - Fork length: 2,400 mm - Unladen weight: 15,186 kg - Tyres: Solid rubber - Model type: CPD100-G3-4 - Battery type: Lithium-ion - Voltage: 80V - Capacity: 808 Ah - Cabin type: Fully enclosed cabin – front, roof, and rear window + steel doors (suspended) - Lighting: 2x front work lights - Lighting: 1x rear work light - Lighting: Rotating beacon Ledpfx Akoyrm R So Ssrk - Lighting: Road equipment (StVO) for possible use on public (restricted) roads: indicator lights, rear lights, reversing light, reflectors etc. - Attachments: Sideshifter - Attachments: Fork positioner

Durumu: yeni, Üretim yılı: 2025, yük kapasitesi: 10.000 kg, kaldırma yüksekliği: 4.500 mm, yakıt türü: dizel, direk tipi: triplex, inşaat yüksekliği: 3.650 mm, çatalların uzunluğu: 2.100 mm, boş ağırlık: 12.800 kg, Donanım: kabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN OPERATION. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards—for maximum quality and your safety. From the chassis to the battery, including drivetrain, brakes, steering, and electrics—every vehicle is thoroughly inspected and overhauled. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide transport & customs clearance ✔ Service & spare parts at fair prices Lsdpjyrm Rxefx Ak Sork ✔ Personal support—even after purchase Test and get advice on-site now—we’ll find the right solution for you. Industrial Truck Data: Manufacturer: Heli Model: Counterbalance Forklift CPCD100-G3-CU Drive: Diesel Load Capacity: 10,000 kg Year: 2025 Operating Hours: 0 Lift Height: 4,500 mm Mast Type: Triplex Free Lift: No Overall Height: 3,650 mm Fork Length: 2,100 mm Unladen Weight: 12,800 kg Tyres: Solid Rubber Model Designation: CPCD100-G3-CU Cabin Type: Full cab – front, roof & rear window + steel doors (suspended) Lighting: 2x front work lights Lighting: 1x rear work light Lighting: Rotating beacon Lighting: Road traffic equipment (StVO) for possible public (limited) road use: indicator lights, tail lights, reversing lights, reflectors, etc. Attachment: Sideshift Attachment: Fork positioner Attachment: Additional hydraulic circuit – routed to carriage

Durumu: işlem için hazır (kullanılmış), Getriebebau Nord SK71L/8-2 motor SK12063AZ-71L/8-2 şanzıman SN: 201892085-100, kullanılmış, iyi durumda, %100 işlevsel, teslimat kapsamı fotoğraflardaki gibidir Ljdst Rmztjpfx Ak Sjrk

Durumu: mükemmel (kullanılmış), CTS Type: CS-70/1000-5 Water-cooled Condenser For sale is a high-quality climatic and temperature test chamber by CTS (Clima Temperatur Systeme), model CS-70/1000-5. This unit is designed to simulate a wide range of environmental conditions and is typically used in industry, research, and quality assurance applications. It enables precise testing under extreme temperature and humidity conditions, such as: - Material testing - Aging tests - Electronics and component testing - Climatic and environmental simulations Thanks to the large test chamber (1000 liters) and powerful control technology, both rapid temperature changes and constant long-term tests are possible. The system is water-cooled, allowing for stable and efficient operation. Technical Specifications: Control System: - Multi-touch controller with integrated program generator - Programmable test sequences - Side feed-through: 50 cm / 125 cm Temperature Range: - Temperature range: –70°C to +180°C - Heating rate: approx. 6 K/min - Cooling rate: approx. 5 K/min - Temperature stability: ±0.3 K Climatic Data (Humidity): - Climatic temperature range: +10°C to +95°C - Humidity range: 10% to 98% RH - Humidity stability: - Range I: ±1.5% RH - Range II: ±3% RH Dew Point Range: - I: +7°C to +94°C - II: –10°C to +7°C Dimensions: - External dimensions (HxWxD): 1950 x 1270 x 2245 mm - Internal dimensions (HxWxD): 900 x 1000 x 1100 mm - Test chamber volume: 1000 liters Electrical Data: - Connection: 400 V, 3/N, 50 Hz - Tolerance: +6% / –10% - Connected load: approx. 16.4 kW - Rated current: approx. 26.8 A Refrigeration System: - Refrigerants: R404A & R23 Weight: approx. 900 kg Important Information for Buyers – For Your Safety: The following work is carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant Lodpfxjyxmi Ae Ak Sjrk 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: Used Scope of delivery: (See images) (Subject to change and errors in technical data – all details are non-binding!) We are happy to answer any further questions by phone.

Durumu: yeni gibi (kullanılmış), Genel olarak revize edilmiş Fiyat: 5.500 EUR Spiral hamur yoğurma makinesi Kapasite: 100 kg un 160/180 kg hamur Ledpfxsx N Ed Te Ak Sjrk Marka: Diosna Kazan hacmi: 260 litre Elektrik gücü: 380V / 50Hz / 3N/PE İki zamanlayıcı İki hız Geri sarma özelliği Yarı kapak, emniyet şalterli Frenli tekerlekler

Durumu: iyi (kullanılmış), Karl Tranklein EK-100 Köşe Kesme Makinası Almanya'da üretilmiştir. Çok iyi durumda. Bu, profesyonel kullanım için üretim sınıfı bir köşe yuvarlama makinasıdır. Lrodpfx Aoy Ehmiok Sok Sağlam dökme demir gövdesi ve güçlü baskı mekanizması sayesinde hassas ve güvenilir çalışma sunar. Değiştirilebilir bıçaklar. Ayarlanabilir kenar payı. Bir set bıçak dahildir. İstif yüksekliği: 100 mm Ağırlık: 130 kg Dakikada çevrim sayısı: 50 çevrim/dakika Güç kaynağı: 400V Atıklar toplama kaplarında biriktirilir. Halen üretilmekte olan modeldir.

Durumu: mükemmel (kullanılmış), Katalog numarası: 7545 Lodpox Uz Tusfx Ak Serk TEKNİK BİLGİLER palet genişliği: 250mm şaft genişliği: 220mm maksimum disk çapı: 300mm disk delik çapı: 60mm kesme yüksekliği: 100mm tablanın genişliği: 650mm tablanın uzunluğu: 1460mm – üstten: 2 sıra tırnak kaymalı düz mil testereli mil yine kaymalı düz mil – alttan: kılavuz ray cırcır tırnaklar tırtıl 2 besleme hızı + kademesiz hız ayarı merkezi yağlama besleme motoru: 1,2kW ana motor: 21kW emiş ağzı çapı: 180mm boy/en/yük toplam ölçüler: 1700x1450x1500mm ağırlık: yaklaşık 1800kg – İtalyan üretimi – DTR dokümantasyonu – Sağlam makine – Kullanılmış çoklu testere, çok iyi durumda Net fiyat: 25900 PLN Net fiyat: 6160 EUR, 4,2 EUR döviz kuruna göre (Fiyatlar kurdaki dalgalanmalara göre değişebilir)

Durumu: mükemmel (kullanılmış), Üretim yılı: 2024, For sale: Professional water treatment and preparation unit UWS Heaty Profiline 100 No 2. This mobile device is designed for use in heating systems, water installations, and HVAC service. Ideal for flushing, filling, and conditioning of installations. The equipment is in very good technical condition, complete and ready for operation. ⚙️ Technical specifications: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Lrsdpfxjyz Dhze Ak Sek Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment includes: Integrated tank EBARA Pump (high quality) Flow meters Pressure gauges Control valves Mobile transport trolley Documentation + accessories (as shown in photos) 🔍 Condition: Used device Very good technical condition Minor, normal signs of use Fully complete ⚠️ Notes: One of the pressure gauges has a damaged casing (cover) – visible in the photos The functionality of this pressure gauge has not been checked If needed, the part can be easily replaced 📦 Applications: Heating installations Water installations System service and cleaning HVAC systems 🚚 Delivery: Pallet shipping available Personal collection possible

Durumu: kullanılmış, boş ağırlık: 7.375 kg, azami yük ağırlığı: 27.625 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2012, yükleme alanı uzunluğu: 13.650 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5 160J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/65R22,5 160J, arka lastik boyutu: 385/65R22,5 160J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, Stake pockets, -- typographical errors, mistakes, and changes reserved, sample images --, More data at: !, More details: ! Lsdpfx Ajy E H N Nek Serk

Durumu: kullanılmış, boş ağırlık: 5.300 kg, azami yük ağırlığı: 12.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2010, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.900 mm, yükleme alanı hacmi: 52 m³, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/141J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/141J, arka lastik boyutu: 235/75R17,5 ---/141J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: ! Ledpfxoy E H Npo Ak Serk

Durumu: kullanılmış, boş ağırlık: 4.300 kg, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2019, yükleme alanı uzunluğu: 7.200 mm, süspansiyon: hava, lastik boyutu: 445/45 R19,5 160J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 445/45 R19,5 160J, arka lastik boyutu: 445/45 R19,5 160J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, -- Druckfehler, Irrtümer und Änderungen vorbehalten, Musterbilder -- Weitere Informationen unter: !, Mehr Details: ! Lrsdpfsy E H Hzjx Ak Sek

Durumu: kullanılmış, boş ağırlık: 6.520 kg, azami yük ağırlığı: 23.480 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, yükleme alanı uzunluğu: 8.610 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/140J, arka lastik boyutu: 235/75R17,5 ---/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Loading platform length (low bed) approx. 6.50 m, total loading platform length approx. 8.60 m, loading height approx. 900 mm. Vehicle is being offered on behalf of a bank. -- Subject to typographical errors, mistakes, and modifications. Sample images -- Ljdey E H E Dopfx Ak Serk More data at: ! More details: !