Kullanılmış Fazla Eli Gördü satın al (20.998)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Uygunluk
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Makine üreticisi
- Üretici Z'den A'ya
- Makine üreticisi
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Uygunluk
- Uygunluk
Küçük ilan
Grevesmühlen
2.461 km
Fazla eli gördü
WEINIGK12
Ara
Durumu: iyi (kullanılmış), Raimann K12 Multileaf testere
Spiker ile Zincir
Zincir genişliği 430mm
Ncjdpfx Aked Scdqs Sor
Kesme yüksekliği yaklaşık.120mm
çeşitli aksesuarlar ile
Küçük ilan
Dortmund
2.566 km
El. işlem görmüş şaft fırını
Borel11.85
Ara
Durumu: kullanılmış, Borel marka elektrikli şaftlı fırın, sirkülatörlü
Nedpovv Sw Isfx Ak Sjcr
Tip: 11.85
Sıcaklık: maks. 550°C
Bağlantı: 5 kW
Net çap: 300 mm
Net yükseklik: yaklaşık 570 mm
Kontrol panosu yok
Küçük ilan
Hessisch Oldendorf
2.476 km
Birden fazla bıçak gördüm
MS-MaschinenbauMBS-1200
Ara
Üretim yılı: 2024, Durumu: yeni, - 50 mm kesme yüksekliği - 1210 mm kesme genişliği - 12 tahrikli silindir - 10 - 30 m / dak değişken besleme hızı - 37 KW Testere Motoru (daha fazlası mümkündür) - 2,2 KW Besleme Şanzıman - 70 mm Testere mili - 225 mm Dairesel Testereler - Makinenin 4000 Kg ağırlığı
Njdpfx Akjfdzrhs Sscr

Şimdi bilgi alın
+44 20 806 810 84
+44 20 806 810 84
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Vincennes
2.824 km
İkinci el Autofrigor 40L pastörizatör
AutofrigorPG24-EOP
Ara
Durumu: mükemmel (kullanılmış), - Boyutlar: 610x780x1410 mm
- Üretim: 12-40 Litre/saat
- Seri No: 1807850/2350
- Yıl: 2008
- Voltaj: 400V
- Güç: 4,6 kW
- Ağırlık: 280kg
Nsdpfx Akswxu Sfs Secr
Bu pastörizatör karıştırır, ısıtır, pişirir, pastörize eder, soğutur, olgunlaştırır, dondurur ve tariflerinizi tamamen otomatik olarak, hiçbir aktarma veya elle müdahale gerektirmeden, hijyenin en üst düzeyinde, programlanabilir otomasyon sistemi AUTOFRIGOR tarafından yönetilen tek bir döngüde korur (Carpigiani, Bravo Tritico vb. ile aynı düzeyde).
Tamamen paslanmaz çelik konstrüksiyon
Model: PG 24.60
Soğutma: ...
Çevrim başına üretim: 4 ila 10 litre
Saatlik üretim: 12 ila 40 litre
Elektrik gücü (400/3/50): 5,2 kW
Boyutlar (cm olarak) (G x D x Y): 61 x 78 x 141
Net/Brüt ağırlık (kg): 250/280.
Küçük ilan
Tata
1.669 km
Eksantrik pres, birden fazla hemen mevcut
HIM HWAIL PRESSHCDS-600
Ara
Durumu: yeni gibi (kullanılmış), Üretim yılı: 2016, HWAIL PRESS HCDS-600 Eksantrik pres, birden fazla adet hemen teslim
Üretici: Hwail Press
Model: HCDS-600
Üretim yılı: 2016
Pres gücü: 600 t
Njdpfjy Ey R Hjx Ak Socr
Vuruş mesafesi: 350 mm
Vuruş sayısı: 30/dk
Ayarlanabilir kızak: 600 mm
Tabla boyutu: 2900 x 1300 mm
Ana motor: AC 55 × 4 kW × P
Yardımcı motor: 5,5 × 4 kW × P
Hava basıncı: 5 kg/cm²
Voltaj: 380 V × 50 Hz
Daha fazla ikinci el makine keşfedin
Küçük ilan
Miechucino
2.147 km
Weinig Unimat 23 EL planya
WeinigUnimat 23 EL
Ara
Durumu: iyi (kullanılmış), Üretim yılı: 2002, Four-side Planer Weinig Unimat 23 EL
- Machine in stock
Ncsdpfx Ajhhyr Aok Ser
- Made in Germany
- Year of manufacture: 2002
- Technical documentation included
TECHNICAL SPECIFICATIONS:
- Planing width: 230 mm
- Planing height: 170 mm
- Feed speed adjustable via inverter: 6-26 m/min
- Spindle diameter: 40 mm
1st bottom spindle: 7.5 kW
2nd right spindle: 7.5 kW
3rd left spindle: 7.5 kW
4th top spindle: 7.5 kW
5th bottom spindle: 7.5 kW
6th top spindle: 7.5 kW
- Feed motor power: 4 kW
- Feed on cardan shafts
- Pneumatic pressure system
- Five upper steel rollers
- Four upper rubber rollers
- Electric height adjustment
- Extraction port diameter: 140 mm
- Central lubrication system
- Table length: 1980 mm
Machine dimensions:
- Length: 520 cm
- Width: 210 cm
- Height: 210 cm
- Weight: 4000 kg
The Weinig Unimat 23EL is a modern four-side planer/moulder—a true "workhorse" for demanding operations.
Typical Applications: mouldings, soffit boards, wall panels, squared timber, profiles
ADVANTAGES:
- Extremely durable, "armored" construction
- Cost-effective relative to capabilities
- Easy to repair
- Well-suited for continuous operation
- Cast iron frame
- Highly stable
- Vibration-free
- Stable material feed
- Simultaneous profiling and planing in a single pass
Küçük ilan
Avusturya
1.826 km
El kumandalı makas
HESSE by DURMAKGM 1215
Ara
Durumu: yeni, Üretim yılı: 2026, Durumu: yeni
Üretim yılı: 2026
Stok numarası: 090204
Teslim süresi: Mayıs 2026, ara satış imkânı
Menşei ülke: Türkiye
Fiyat: 4.290 €
Kesim uzunluğu: 1.250 mm
Maks. sac kalınlığı - yapı çeliği: 1,5 mm
Arka dayama: 500 mm
Uzunluk: 2.250 mm
Genişlik: 1.000 mm
Yükseklik: 1.150 mm
Ağırlık: 460 kg
Çelik kaynaklı konstrüksiyon
Nodpjyz Dc Sefx Ak Sscr
Manuel baskı koluyla
Arka dayama el volanıyla manuel ayarlanabilir
Kullanım kılavuzu İNGİLİZCE olarak
Küçük ilan
Avusturya
1.826 km
El kumandalı makas
HESSE by DURMAKGM 1015
Ara
Durumu: yeni, Üretim yılı: 2026, Durumu: yeni
Üretim yılı: 2026
Stok numarası: 090203
Nsdpeyz Dc Eefx Ak Socr
Teslim süresi: Mayıs 2026, arada satılabilir
Menşei ülke: Türkiye
Fiyat: 3.810 €
Kesme uzunluğu: 1.020 mm
Maks. sac kalınlığı - yapı çeliği: 1,5 mm
Arka dayama: 500 mm
Uzunluk: 1.950 mm
Genişlik: 1.000 mm
Yükseklik: 1.150 mm
Ağırlık: 420 kg
Çelik kaynaklı konstrüksiyon
Manuel baskı aparatı
Arka dayama el çarkı ile manuel ayarlanabilir
Kullanım kılavuzu İNGİLİZCE
Küçük ilan
Fumane (Verona)
2.126 km
İkinci el R&G kapak kapama makinesi - 12.000 şişe/saat
Robino & GalandrinoZ 12
Ara
Durumu: kullanılmış, Üretim yılı: 2014, makine/araç numarası: CA79, Used R&G 12 Capsule Machine - 12,000 BPH
Technical Specifications & Performance Data
This single-station R&G capsule machine, model Z 12, is designed for high-speed capsule application in professional wine bottling environments. It combines PVC capsule heat-shrinking with sparkling wine/champagne foil folding/smoothing in an interchangeable turret configuration, delivering reliable performance for industrial packaging and beverage production.
Production Speed: up to 16,000 bph for PVC heat-shrinking; up to 12,000 bph for champagne/sparkling wine foil folding/smoothing
Application Technologies: PVC heat-shrink capsules and sparkling wine/champagne foil folding/smoothing
Number of Heads: 12 heat-shrink heads, interchangeable with 12 pneumo-mechanical folding/smoothing heads
Rotation/Feed Direction: left to right, clockwise
Capsule Magazine Capacity: approx. 10,000 pieces
Bottle Handling: Designed for glass bottles and standardized wine bottling formats
Year of Manufacture: 2014
Machine Type: Single-station capsule applicator
Model Code: Z 12
Advanced Automation & Control Systems
The Z 12 integrates recipe-driven automation to simplify changeovers and ensure reproducible quality. Automated movements and intelligent sensors support consistent capsule application and minimize operator intervention.
- Automatic height adjustment of the machine via recipe parameters
- Universal feed screw with automatic adaptation from stored recipes
- Cap/cage detector in case of missing capsule
- Capsule presence sensor with automatic machine stop
- Exchangeable turret tool for quick change between PVC heat-shrinking and sparkling wine/champagne foil folding/smoothing processes
Integration into Production Line
Designed for seamless integration into a used filling line or as a stand-alone workstation. This capsule machine supports efficient material flow and quick adaptation to upstream/downstream equipment in beverage production.
- Universal infeed/outfeed starwheels for smooth material flow
- Compatible with standard wine bottle geometries
- Ideal for integration with corkers, wire-hooding units, labelers, and conveyors
- Recipe-based adjustments reduce changeover times
Machine Condition & Maintenance History
This used capsule machine is presented in operational condition and is ready for immediate use after standard commissioning. Its automated recipe controls and robust turret design support consistent performance in continuous operation.
Operating Performance & Versatility
Nsdpfoy Ef T Hsx Ak Socr
The Z 12 is designed for wineries and beverage producers seeking reliable capsule application with minimal downtime. Its dual-function turret allows switching between PVC capsule heat-shrinking and sparkling wine/champagne foil folding/smoothing processes.
Küçük ilan
Скопје
1.212 km
Görüntü yazıcısı
KODAK CREOMagnus 400 Fiber
Ara
Durumu: mükemmel (kullanılmış), Üretim yılı: 2006, Fonksiyonellik: tamamen fonksiyonel, Modell / Beschreibung: „MAGNUS 400 FIBER, SHIPPABLE KMAT“ (Creo-Typenschild)
Seriennummer: M41243
Baujahr: Juni 2008
Anschlussleistung (Plattenbelichter): 200/210/220/230/240 V, 16 A, 50 Hz (lt. Typenschild)
Nodpfx Akoyxl N Ij Secr
Lasersicherheit: als Laserprodukt der Klasse 1 gekennzeichnet (üblich für geschlossene CTP-Systeme)
Maximale Plattengröße: ca. 685 × 762 mm (um den Trommelumfang × entlang der Trommel)
Minimale Plattengröße: ca. 300 × 228 mm
Auflösung: bis zu 3048 dpi
Durchsatz: typischerweise ca. 16 Platten/Stunde (abhängig von Plattentyp, -empfindlichkeit und -konfiguration)
Abmessungen / Gewicht der Maschine: ca. 135 × 176 × 145 cm, etwa 750 kg
Das Magnus 400 Fiber System mit Shippable KMAT-Konfiguration ist eine professionelle industrielle Imaging-Lösung, konzipiert für hochpräzise Produktionsumgebungen. Solche Anlagen kommen typischerweise in der Druck- und Grafikindustrie zum Einsatz, insbesondere zur präzisen Bebilderung und Verarbeitung von Druckplatten mit gleichbleibend hoher Leistung und Genauigkeit.
Das System wurde entwickelt für den zuverlässigen Einsatz in industriellen Produktionsstätten, in denen stabile Prozesse und ausfallsichere Maschinen essenziell sind. Maschinen dieses Typs sind weit verbreitet bei Druckereien, Verpackungsherstellern sowie Unternehmen im grafischen Produktionsprozess.
Das System enthält industrielle Elektronikbauteile wie das Hu.q CSG-86 Modul (Herstellungsdatum Juli 2006), Betriebsspannung 200–240 V AC, 50/60 Hz, mit CE- und UL-Zulassung. Diese Komponenten sind für den Langzeiteinsatz unter anspruchsvollen industriellen Bedingungen ausgelegt und gewährleisten eine konstante Systemleistung.
Das Magnus 400 Fiber CTP-System eignet sich bestens für Unternehmen, die eine zuverlässige Lösung für die Plattenbebilderung und -vorbereitung in professionellen Druck- und Industriebetrieben benötigen.
Die Maschine kann vor Ort besichtigt und für den Versand vorbereitet werden. Verladung und internationaler Transport können je nach Käuferwunsch organisiert werden.
Küçük ilan
Siedlce
1.776 km
El giyotin makası
CORMAKHS-12
Ara
Durumu: yeni, Üretim yılı: 2026, CORMAK HSS 12 giyotin makası
Sac, lama, çelik çubuk kesimi için manuel makaslar. Her modelin bıçak uzunluğu farklılık gösterir.
Çilingir atölyeleri ve şantiyelerde kullanıma uygun, çok fonksiyonlu sac kesme makası.
Uygun geometri, fazla güç kullanmadan kesmeye olanak tanır
Ayarlanabilir kelepçe sayesinde güvenli malzeme sabitlemesi
Teknik veriler
Njdpfx Aovzqmfjk Socr
Bıçak uzunluğu 304 mm
Kesilen malzemenin kalınlığı: sac 6 mm
Kesilecek malzeme: 70 x 6 mm düz çubuk
Kesilecek malzeme: çubuk 13 mm
BOYUTLAR 740 x 160 x 440
AĞIRLIK 26 kg
Küçük ilan
Türkiye
251 km
Komatsu PC450 Bom Kolu İkinci El
KomatsuPC450 Boom-Arm Second Hand
Ara
Durumu: kullanılmış, Ekipman: Ekskavatör kolu
Nsdpfspa Rrasx Ak Secr
Küçük ilan
İtalya
2.126 km
İkinci el kapsül makinesi Robino & Galandrino Fenix 2 2014
Robino & GalandrinoFenix 2
Ara
Durumu: kullanılmış, Üretim yılı: 2014, makine/araç numarası: CA76, Technical Specifications & Performance Data
The Robino & Galandrino Fenix 2 is a specialized capsule applicator designed for precise cap application on bottles within a used bottling line environment. This unit was built with industrial packaging reliability in mind and integrates seamlessly into beverage production settings and upgrades of pre-owned filling plants. Manufactured by Robino & Galandrino, it leverages the brand's engineering expertise to deliver consistent, repeatable results when applying capsules.
Manufacturer: Robino & Galandrino
Model: Fenix 2
Year: 2014
Machine Category: Capsule Applicator
Diagram/Code: FEX750
Power supply: 400 V, 3-phase
Frequency: 50 Hz
Nominal current: 6.5 A
Typical application: Capsule application on bottles in beverage production lines
Advanced Automation and Control Systems
The Fenix 2 supports easy integration with modern line controls. Its 400 V three-phase, 50 Hz electrical system is standard in European filling plants, simplifying commissioning alongside PLC/HMI-controlled production lines. The machine is designed for operator efficiency and repeatability, supporting clearly indicated operational states, standardized interlocks, and controlled application parameters to help ensure consistent cap quality.
Production Line Integration Capabilities
This capsule applicator is intended for inline operation as part of an industrial packaging system. It effectively connects to upstream and downstream modules such as corking and capping stations, labeling machines, and conveyors. The machine's robust frame and standardized electrical architecture allow for integration into a used filling line or a mixed beverage production line. It is suitable for setups with glass bottles typically used in wine and premium beverage packaging.
Njdpfxeyhbi Is Ak Socr
Machine Condition & Maintenance History
As a pre-owned unit manufactured in 2014, the Fenix 2 provides a solid balance between modern engineering and proven field reliability. It is suited for facilities seeking dependable capsule performance within an established beverage production process or for upgrading existing used filling equipment. Typical maintenance routines include inspection of the capsule feed, head alignment checks, and wear part inspections to maintain application accuracy and throughput.
Operating Performance and Versatility
The Fenix series is renowned for its stability in capsule applications on bottles used in wine and premium beverage packaging. It is designed for precise placement and consistent shrinking/application characteristics, supporting the high-quality presentation standards required in beverage production. The machine is compatible with standardized conveyor solutions for glass containers and can adapt to various line layouts and speeds.
Küçük ilan
Fumane (Verona)
2.126 km
İkinci el şişirme makinesi Contiform S14 - 25.000 şişe/saat
KronesS14
Ara
Durumu: kullanılmış, Üretim yılı: 2009, makine/araç numarası: SO128, Used Contiform Stretch Blow Moulding Machine
This pre-owned Krones Contiform S14 stretch blow moulding machine is designed for high-performance PET bottle production in modern beverage manufacturing. With a maximum output of up to 25,000 bottles/hour, it offers an excellent solution for businesses seeking to expand capacity or to upgrade an existing filling line with reliable, second-hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI, ensuring robust automation and user-friendly operation. Neck-handling transfer provides stable bottle guidance across formats, while the rotary design guarantees consistent performance in beverage production.
Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide product range including still and sparkling water, CSD, milk, edible oil, beer, wine, and spirits. The current setup is optimised for 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated filling lines.
Technical Specifications & Performance Data
Manufacturer: Krones
Series: Contiform
Model Code: S14
Year of Manufacture: 2009
Maximum Speed: 25,000 bottles/hour
Container Material: PET
Ncedpfjx H Tgdjx Ak Sjr
Current Format: 1.5L
Max Container Height: 320 mm
Table Height: 1470 mm
Type: Rotary
Transfer Type: Neck Handling
Neck Finish: Alaska
Number of Cavities (Moulds): 14
Number of Mandrels: 7
Number of Grippers (Infeed/Outfeed): 7
Operating Direction: Counter-clockwise
Electrical Supply: 400 V, 3 PH + N, 50 Hz
Rated Current: 313 A
Advanced Automation & Control Systems
This machine features a Siemens PLC for reliable process management and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V and 50 Hz (3 PH + N) supports stable, industrial-grade performance. Safety guarding and interlocked access points ensure safe operation during production and format changes. The neck-handling design enables smoother format changes and reduces container scratching.
Line Integration Capabilities
The Krones Contiform S14 can operate as a standalone stretch blow moulder or be integrated into a complete beverage production line. It seamlessly connects with preform handling systems, high- and low-pressure air supplies, as well as downstream conveyors leading to filling, labelling, and packaging equipment. The rotary platform and neck-handling transfer ensure compatibility with typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink production.
Küçük ilan
Chmielów
1.672 km
LINDE E15 forklift - ikinci el.
LindeE15
Ara
Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: H2X386J10647-0059, Üretim yılı: 2018, çalışma saatleri: 10.594 h, yük kapasitesi: 1.500 kg, kaldırma yüksekliği: 4.640 mm, yakıt türü: elektrikli, LINDE E15 Forklift – Compact power for work in all conditions
The electric forklift truck LINDE E15 (serial no. H2X386J10647-0059) is a versatile and modern warehouse vehicle with a lifting capacity of 1,500 kg and a maximum lift height of 464 cm. Thanks to its quiet, emission-free operation, precise handling, and robust heated cabin, this model excels both indoors and outdoors in changing weather conditions. The package also includes a charger, making it ready to operate immediately upon delivery.
Key advantages:
- Precision and maneuverability – LINDE Load Control system and convenient dual-pedal controls facilitate precise maneuvers in confined spaces.
- Electric drive = lower operating costs – no combustion fuel means cost savings and the ability to work in areas with strict environmental requirements.
- Full operator comfort – spacious, heated cabin, ergonomic seats and reduced vibrations enhance operator well-being.
- Durability and safety – solid construction, advanced control systems, and high-quality components ensure long service life.
- Ready-to-use package – the forklift is sold complete with forks and charger, requiring no additional investment.
Njdpfeyz Sqwjx Ak Socr
- Quiet, eco-friendly operation – emission-free use enables deployment indoors and in “clean zones.”
Applications of the LINDE forklift:
LINDE E15 is a reliable solution for modern warehouses, distribution centers, production facilities, and transshipment halls. It is ideal for loading/unloading trucks, pallet transport, and shelf management. Its compact design enhances mobility in narrow aisles, while the electric drive allows it to operate where diesel forklifts are prohibited.
Forklift specification:
- Manufacturer: LINDE
- Model: E15
- Condition: Used
- Reference No.: MTP005952
- Year of manufacture: 2018
- Power type: Electric
- Operating hours: 10,529
- Lifting capacity (kg): 1,500
- Lifting height (cm): 464
!! Charger included.
Net price: €9,599 net
* Transport possible across Europe.
* The above offer does not include transport costs.
* Location: Chmielów/Tarnobrzeg, Poland
Küçük ilan
Bruchsal
2.397 km
İkinci el Fischer konsol rafları
FISCHER
Ara
Durumu: kullanılmış, Uzunluk ~ 77 m
Derinlik 600 / 800 / 1200 mm
Yükseklik ~2000 - 4000 mm
Dikmeler, adet ~ 56 adet
Parti vidalı konsol rafları Fischer ve diğerleri.
Küçük bir planya atölyesinin komple işletme donanımıdır.
Nsdpfx Akoy Ez Dnj Secr
Serbest duran ve duvara monte. Tek taraflı ve çift taraflı. Tamamen değişken.
Küçük ilan
San Giovanni Al Natisone
1.947 km
Nosotti T200/1500 ikinci el demir işleme tornası, aksesuarlarıyla birlikte tam set
NosottiT200/1500
Ara
Durumu: yenilenmiş (kullanılmış), Demir ve metal işleme torna tezgahı
Marka: Nosotti
Nsdpfx Asy D Sunjk Sscr
Model: T200/1500
Aksesuarlar fotoğraftaki gibidir
Küçük ilan
Wöllstadt
2.427 km
Görüntü işleme sistemi Kamera Kontrolü E
KeyenceCA-H500M // XG-X1500 // CA-DSW30 E
Ara
Durumu: yeni gibi (sergi parçası), Üretim yılı: 2021, çalışma saatleri: 50 h, Fonksiyonellik: tamamen fonksiyonel, Görüntü işleme sistemi 5 milyon piksel S/B kamera (model numarası CA-H500M) ve görüntü işleme kontrolöründen (model numarası XG-X1500) oluşur. Sete kablolar ve beyaz arka ışık (model numarası CA-DSW30) dahildir.
Nsdpfx Akjmza Ile Sjcr
Tip: Kamera*1
Görüntü alma elemanı: 2/3" S/B CCD görüntü alma elemanı, 11x yüksek hızlı kare piksel yakalama, 5.050.000 piksel
Hücre boyutu 3, 45 x 3, 45 µm
Geçerli piksel sayısı: 4.990.000 piksel 2432 (Y) x 2050 (V)
Piksel iletim hızı: 130 MHz (65 MHz x 2 kanal)
Tarama sistemi: tam kare (61,2 ms), taramalı (40,3 ms)
İletim sistemi: Dijital seri iletim
Elektronik obtüratör: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0,05 ms ila 9000 ms arasında sayısal değerlerle ayarlanabilir.
Lens yuvası: C-vida yuvası
Küçük ilan
Fumane (Verona)
2.126 km
İkinci el Combi KRONES Contiform S8 + Mecafill triblock
KronesS8
Ara
Durumu: kullanılmış, Üretim yılı: 2004, makine/araç numarası: M323, Used combi block KRONES Contiform S8 + Mecafill triblock
Technical specifications & performance data
This rotary blow-fill-cap monoblock is designed for high-quality PET bottle processing and beverage production. Manufactured by Krones, it integrates a Contiform S8 stretch blow molding section with a Mecafill filling block and a Krones capping unit, delivering efficient performance for still and sparkling water. Engineered for industrial packaging environments and suitable for integration into a used filling line or as a standalone second-hand system, it combines precision, reliability, and a compact footprint.
Manufacturer: Krones
Model configuration: Contiform S8 + Mecafill (integrated triblock)
Year of manufacture: 2004
Maximum output: up to 12,800 bottles per hour
Bottle material: PET
Current bottle formats: compatible with 0.5 L, 1.0 L, 1.5 L
Max. bottle height: 350 mm
Rotational direction: Clockwise
Neck type: Alaska
Quick-change mold inserts (blow molds): 8 cavities
Grippers (in/out): 8
Mandrels: 220
Blow air pressure: 40 bar
Electrical supply: 400 V, 3 ph, 50 Hz
Control systems: Siemens PLC with Krones HMI
Advanced automation & control systems
The monoblock features an integrated automation suite that streamlines operation and reduces changeover times. The Siemens PLC platform coordinates stretch blow molding, filling, and capping, while the Krones HMI enables intuitive process visualization, recipe selection for multiple bottle formats, and operator diagnostics. Rotary motion ensures smooth container transfer between stations, minimizing wear and misalignment. Electronic setpoints for speed and temperature profiles enhance consistency between shifts and batches. Safety interlocks and protected access points support reliable operation in beverage production.
Integrated line and plant connectivity
Designed for seamless integration, this monoblock can operate inline with upstream material handling equipment, downstream conveyors, labelers, inspection stations, and secondary packaging machines. It fits modern beverage plants and industrial packaging layouts, supporting flexible format changes between 0.5 L, 1.0 L, and 1.5 L PET bottles. The integrated design reduces footprint and transfer points compared to separate machines, increasing efficiency for both new facilities and upgrades of existing filling lines.
Machine condition & service history
Ncedpfx Aeyz R H Dek Ser
The machine is overhauled and guaranteed, operational with matching spare parts available. It will be delivered in perfect working condition, tested and ready for immediate use. A 6-month warranty underscores its reliability and provides additional security for buyers of used equipment.
Operational performance & versatility
Küçük ilan
Fumane (Verona)
2.126 km
İkinci el ELOPAK sks-s60S Shikoku dolum hattı
ElopakSKS-S60S
Ara
Durumu: kullanılmış, Üretim yılı: 2007, çalışma saatleri: 3.339 h, makine/araç numarası: LC615, Used ELOPAK SKS-S60S Shikoku Filling Line Technical Specifications & Performance Data This aseptic gable-top carton filling machine is designed for reliable beverage packaging and delivers robust performance for long shelf life products. Manufacturer: Shikoku Kakoki, year of manufacture: 2007. It operates with low running hours and supports multiple carton sizes for flexible production planning in industrial packaging and beverage environments.
Manufacturer: Shikoku Kakoki
Model: SKS-S60S
Year: 2007
Operating hours: 3339
Filling mode: Aseptic
Container type: Gable-top cartons
Compatible formats: 0.5L, 0.75L, 1.0L
Electrical supply: 400 V, 50 Hz, 3-phase
Current consumption: 114 A
Compressed air pressure: 550–990 kPa
Air consumption: 2460 NL/min
Advanced Automation & Control Systems
Designed for aseptic operation, this machine enables precise filling in a controlled sterile environment. The three-phase industrial electric installation ensures stable operation and easy integration into plant utilities. Format changes between 0.5L, 0.75L, and 1.0L are efficiently managed to reduce downtime and improve the overall efficiency of the line—ideal for used or refurbished installations.
- Industry-standard controls for consistent aseptic performance
- Process parameters optimized for sterile packaging operations
- User-friendly interface for setup and monitoring
- Coupled access points and safety circuits for protected operation
Production Line Integration Capabilities
This aseptic carton filler integrates seamlessly into a used filling line or a new packaging setup. It is well suited for connectivity with upstream carton preparation or sterilization modules as well as downstream capping, date coding, carton packing, and palletizing equipment. The machine supports inline or standalone operation depending on the plant configuration.
Ncjdpfxoyz R E Ts Ak Ssr
- Interface with conveyor belts and downstream packaging machinery
- Flexible line placement for new build or retrofit projects
- Multi-format capability for 0.5L, 0.75L, and 1.0L cartons
Machine Condition & Service History
With only 3339 operating hours, this used aseptic filler exhibits low wear compared to typical service life expectations for industrial packaging equipment.
- Low operational use
- A well-maintained aseptic configuration
Operational Performance & Versatility
Optimized for aseptic beverage production, the machine is ideal for long shelf life products typically packaged in gable-top cartons. Its multi-format capability enables agile product planning and SKU changes without extensive conversions.
Aseptic filling for extended shelf life...
Küçük ilan
Wymysłów
1.958 km
Radyal fan 0,75kW 400V 1395d/dk 3-faz TECO IP54 Ø250mm
Wentylator promieniowy 0,75kW 400V 1395rpm 3-fazowy TECO IP54 Ø250mmWentylator promieniowy 0,75kW 400V 1395rpm 3-fazowy TECO IP54 Ø250mm
Ara
Durumu: mükemmel (kullanılmış), I am offering robust radial fans (blowers) in excellent condition – the equipment is virtually unused. Perfect for industrial applications, ventilation, extraction, filtration systems, or workshop installations.
⚙️ Technical Data (from nameplate)
Power: 0.75 kW (1 HP)
Supply: 3-phase 200/400V
Frequency: 50 Hz
Speed: ~1395 rpm
Protection class: IP54
Ncodpfxsyypgtj Ak Sor
Motor type: TECO 3-phase induction motor
📏 Dimensions (approximate)
Inlet diameter: approx. 24–25 cm
Construction: steel housing + metal impeller
✅ Benefits
✔ condition very close to new
✔ solid industrial-grade construction
✔ efficient 3-phase motor
✔ compact dimensions
✔ ideal for extraction, sawdust, dust, ventilation
- PRICE IS PER PIECE.
Güven mührü
Machineseeker tarafından sertifikalandırılmış bayiler

Küçük ilan
София
1.074 km
Görüntü yazıcısı
KodakPolychrome KOB 70
Ara
Durumu: iyi (kullanılmış), Üretim yılı: 2005, Fonksiyonellik: tamamen fonksiyonel, Aydınlatma ön baskı ekipmanı
Ncedpfjyb Tf Ujx Ak Ser
Küçük ilan
Nijer
2.126 km
İkinci el Dolum Monoblok GALDI RG50, saate kadar 3000 karton
GaldiRG50
Ara
Durumu: kullanılmış, Üretim yılı: 2005, makine/araç numarası: M268, Used GALDI RG50 Filling Monoblock – up to 3,000 Cartons/Hour
Ncodpjvgvguefx Ak Sor
Technical Specifications of the Used GALDI Monoblock
The used GALDI RG50 filling monoblock, with a capacity of up to 3,000 cartons per hour, delivers high performance and reliability for the production of fresh liquid products such as milk, cream, and fruit juices. It processes up to 3,000 cartons per hour, making it ideal for medium-scale production facilities requiring fast and consistent output. This machine is characterized by both speed and efficiency.
Production Capacity and Carton Specifications
The GALDI RG50 model is designed to handle up to 3,000 cartons per hour. Furthermore, the machine can fill volumes of 0.25, 0.50, and 1 liter, using B-format cartons measuring 70 x 70 mm. These specifications ensure the monoblock can efficiently package various formats while maintaining high operational efficiency. Consequently, it offers versatility for different packaging requirements.
Power Supply and Energy Consumption
This monoblock requires 20 kW of power and operates at 380V/50Hz. These energy requirements are industry standard for equipment of this class. Production facilities must ensure that their electrical infrastructure can accommodate these demands to prevent compatibility issues or downtime. Careful planning also helps avoid unnecessary production delays.
Year of Manufacture and Operating Condition
The used GALDI RG50 filling monoblock was manufactured in 2005. Although the machine has completed 22,506 operating hours, it remains fully functional following a complete overhaul in 2019. The machine is currently in storage and available for sale in its current condition. The recent maintenance ensures smooth operation and enhances its value.
Dimensions and Weight
The machine measures 4.70 meters in length, 2.45 meters in width, and 2.85 meters in height, with a total weight of 2,500 kg. These compact dimensions facilitate easy integration into existing production layouts. Production teams should ensure sufficient space for installation and future maintenance access. Proper workspace planning guarantees a smooth installation process.
Compatible Products
The used GALDI RG50 filling monoblock processes fresh liquid products such as milk, cream, and juices. Its technology preserves the quality of delicate products, maintaining their organoleptic properties during the filling process. Operators must ensure that products meet the machine’s specifications to prevent quality issues or interruptions in production. Adhering to these requirements ensures smooth operation.
Conclusion on the Used GALDI Monoblock
In summary, the used GALDI RG50 filling monoblock at up to 3,000 cartons/hour offers a reliable and versatile solution for filling fresh liquid products. Its capacity to handle multiple...
Küçük ilan
Bad Honnef
2.537 km
İşleme merkezi MASTERWOOD TF 100 2.0 - ikinci el -
MASTERWOODTF 100 2.0
Ara
Durumu: mükemmel (kullanılmış), Machining Center MASTERWOOD TF 100 2.0 - used -
Nsdpfx Aksy Eylwo Socr
Through-feed machining,
Ball screw spindles on all axes,
Network card for remote maintenance,
Integrated control cabinet,
Saw unit for grooving in X-direction,
Pick-up tool changer,
Automatic central lubrication,
Plate measuring sensor,
New drill set,
New grooving saw blade,
Clamex (optional),
Door processing (optional)
----- Technical Data -----
Min. workpiece length X: unlimited,
Min. workpiece length Y: 1,000 mm,
Min. workpiece thickness: 60 mm,
Number of vertical drilling spindles: 10 pcs,
Number of horizontal double drilling spindles in X-direction: 2 pcs,
Number of horizontal double drilling spindles in Y-direction: 1 pc,
Saw blade diameter of saw unit: 120 mm,
Number of tools in changer: 6 pcs,
Extraction port diameter: 150 mm,
Compressed air connection: 6-8 bar,
Dimensions (LxWxH): 1,920 x 2,818 x 1,620 mm,
Weight: 1,500 kg
Quality info:
- Complete basic cleaning
- Electrical system checked
- Pneumatics checked
- Set up according to manufacturer specifications
- Immediately ready for operation
Küçük ilan
Wymysłów
1.958 km
Miele WS/5141-EL
Miele 14KGWS/5141-EL
Ara
Durumu: iyi (kullanılmış), For sale: robust, German-built industrial washing machine from the renowned brand Miele, model WS 5141 EL. This unit is engineered for intensive use in commercial laundries, hotels, hospitals, and production facilities. It features an automatic detergent dosing system and an efficient heating unit with a power output of 15 kW.
- Technical specifications:
• Model: Miele WS 5141 EL
• Type: Industrial, freestanding washing machine
• Power supply: 3N~ 380–415V / 50–60Hz
• Heating power: 15 kW
• Power consumption: 15.4 kW
• Drum capacity: up to 14 kg
• Spin speed: up to 1000 rpm
• Drum dimensions: Ø 590 mm x 512 mm
• Weight: approx. 380 kg
• Electronic control with programmer and automatic dosing
• Protection class: IP X4
• PC/programming interface
- Technical condition:
• The machine is fully functional
Njdpew Hhvmjfx Ak Secr
• Ready for immediate connection – complete set
• Dosing system requires refilling of container no. 2 (message displayed on screen)
• Service inspection valid until 2025 (Miele service sticker)
• Removed from industrial line operation
- Applications:
Ideal for:
• Commercial laundries
• Industrial facilities
• Care homes / hospitals
• Hotels and guesthouses
• Cleaning companies
- Why choose this machine?
Premium-grade, German-made equipment – extremely durable construction, perfect for heavy-duty use. Instead of investing 20,000–25,000 PLN net in a new unit, save significantly while maintaining Miele quality and reliability.
- Included:
• Miele WS 5141 EL washing machine
• Cabinet with dosing installation (as pictured)
• All connection hoses
Sizin için aramayı kolaylaştırıyoruz: "fazla eli gördü"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.
Kullanılmış Fazla Eli Gördü (20.998)
Artık Machineseeker genelinde, 200.000’den fazla kullanılmış makineyle arama yapın.En popüler makine adlarını inceleyin:

Şimdi bilgi alın
+44 20 806 810 84
+44 20 806 810 84
Şimdi ilan ver
*ilan başına/ay




















































































































































































