Kullanılmış Sıcak Tutmak satın al (1.623)

Koşul: mükemmel (kullanılmış), CTS Type: TSS-70/350-A Water-cooled chiller unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for conducting thermal shock tests and is typically used in industry, research, and quality assurance. Fields of application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and thermal cycling tests Technical specifications: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Cooling system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Programmable operation - Digital display of set and actual values - 2-zone system (hot and cold chamber) - Automatic transfer basket for shock tests Technical configuration: - Separate hot and cold chambers - Shuttle basket system for rapid temperature change - Test space made of stainless steel - Insert shelf / wire rack - Viewing window in the door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2450 x 2160 x 2200 mm Internal dimensions (HxWxD): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Duodey Hkgbepfx Aquju Further data: Degree of protection: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following work is carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: see pictures (Subject to changes and errors in the technical data!) For further questions, we are happy to assist by phone.

Koşul: mükemmel (kullanılmış), CTS type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is used for conducting thermal shock tests and is typically employed in industry, research, and quality assurance applications. Areas of application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Dsdpfoy Hkd Hex Aquouu Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: - Timewise: ±1 K - Spatial: ±2 K Temperature change speed: - Maximum 100 K/min on average for shock test procedures without radiant heat Temperature transfer time: - ≤ 15 min in the range of -65°C to +200°C with 10 kg ICs Changeover time: -

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 115 kg, giriş voltajı: 230 V, garanti süresi: 24 aylar, sıcaklık: 95 °C, Teknik özellikler: Durum: YENİ Katalog numarası: 1.030-510.0 Elektrik bağlantısı (Faz/V/Hz): 1 / 230 / 50 Güç tüketimi (kW): 0,3 Maksimum besleme suyu sıcaklığı: 50°C Minimum besleme suyu miktarı: 400 l/saat Su debisi (l/saat): 400-1300 Maksimum işletme aşırı basıncı (güvenlik valfi): 220 bar Maksimum sıcak su çalışma sıcaklığı: 95°C Brülör gücü: 64kW Maksimum ısıtıcı yakıt tüketimi: 5,9 kg/saat Yakıt deposu: 20L Duedpfxoxykwwj Aqusu Yakıt türü: Mazot (EL tipi) veya dizel Çalışma ağırlığı: 115kg Boyutlar (UxGxY, mm): 880x680x860 Teslimat kapsamı: - Klasik püskürtme tabancası - M22 dişli - Püskürtme borusu: 1050 mm - Hortum: 10m - DN8 - 250bar - 100°C - M22/M22 - Hortum (yüksek basınçlı temizleyici ile sıcak su jeneratörü bağlantısı) - 3m - DN8 - 315bar - 60°C Dayanıklı cihaz: - Dayanıklı çerçeve, sürekli ve yoğun kullanımda koruma sağlar. - Bakım gerektiren tüm parçalara kolayca erişilebilir. - Entegre yakıt filtresi ve yakıt deposunun temizlik amacıyla sökülebilme imkânı.

Üretim yılı: 2020, çalışma saatleri: 1.000 h, Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, 🔥 New price every Monday – while supplies last! 🔥 KAMA ProCut 76 Foil – High-end Die Cutting and Hot Foil Stamping Machine Model year 2020 | only approx. 1,000 operating hours | immediately available For sale is a KAMA ProCut 76 Foil from 2020, in exceptionally good condition with only approx. 1,000 operating hours. The machine is currently in production, is fully functional, and can be inspected and tested under power at any time. Why this machine is interesting: ✔ Immediately available – no long lead times ✔ Extremely low operating hours ✔ High-end configuration including hot foil unit & AutoRegister ✔ Ideal for premium packaging and finishing applications ✔ Made in Germany ✔ Significantly below new price Highlights & Equipment • Integrated hot foil stamping • KAMA AutoRegister for maximum registration accuracy • Servo main drive for higher speeds and/or longer stamping time • Servo-driven feeder and feed table • Electronic double sheet control • Pneumatic tool clamping • Die cutting force display with overload protection • Universal chase frame • Chase frame rack • Vacuum pump and compressor • CE compliant • Industry 4.0 ready / network connectivity Technical Data • Model: KAMA ProCut 76 Foil • Year of manufacture: 2020 • Operating hours: approx. 1,000 h • Max. sheet format: 760 × 600 mm • Max. die cutting format: 743 × 585 mm Dusdpfeyc Hmuox Aqueu • Production speed: up to 5,500 sheets/h • Die cutting force: 165 t The machine comes from our own operation and is for sale because it is now rarely needed in the current production environment. 📍 Location: 75397 Simmozheim, Germany 🔌 Inspection under power possible 📄 More photos and documents available on request

Koşul: yeni, Üretim yılı: 2025, Dimensions (LxWxH): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industries and craft businesses. They are designed for heating larger areas such as workshops and production halls in both craft and industrial settings. These hot air systems do not require long heat-up phases and can heat up a joinery, carpentry workshop, or other production facilities in a very short time. Fuel sources include solid wood and its by-products such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of 24 July 1996, and Safety Directive Annex 89/392 EC. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both emission levels required by the 1st BImSchV (German Federal Immission Control Ordinance). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air output: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2 - 0.3 mbar - Flue draught at rated output: 0.18 mbar - Heated volume: approx. 2,500 m³ - Heated area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue outlet diameter (fitting): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85-90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Hot air outlet connections: 2 x Ø220 mm - For further data, please see the attached data sheet The two pipe sockets for hot air discharge are located at the lower rear section of the furnace. Dusdpfxsvz Hhxj Aquju A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and craft businesses. They have been developed for heating larger utility areas such as workshops and production spaces in craft and industrial enterprises. These hot air systems require no long heat-up phases and are capable of heating a joinery or carpentry workshop or other production facilities in a very short time. The furnaces are designed to use solid wood and its by-products as fuel, e.g. solid wood board offcuts, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces conform to the EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, as well as the safety guideline of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the emission limits stipulated by the 1st BImSchV. Dusdpfxjvz Hq To Aquou - Automatic mode and continuous air operation - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m3/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draught requirement at nominal output: 0.18 mbar - Heated volume: approx. 1,600 m3 - Heated area: approx. 300 m2 - Space requirement: width 800 mm, depth 1,170 mm, height 2,200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85 – 90 % - Required chimney draught: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet collar: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for outgoing hot air are located at the lower rear of the furnace. A maximum pipe length of 20 metres per connector is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industries and craft enterprises. They have been developed to heat large utility spaces, such as workshops and work areas in craft and industrial businesses. These hot air systems require no long warm-up phases and can heat up the workshop or production facilities of carpentries and joineries in a very short time. Fuel sources include solid wood and by-products such as solid wood panel scraps, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline 89/392 EC. All MARTINA series hot air furnaces—models 15, 30, 55, 85, 120, 180, 240, and 350—meet both emission stages required under the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air output: 18,000 m³/h - Combustion chamber depth: 1200 mm - Feed door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox draft: 0.2–0.3 mbar - Required draft at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft: 16 Pa Djdpfovz Hqgjx Aqusuu - Exhaust temperature: 290°C - Hot air outlet connectors: 2 x Ø 450 mm - For further technical data, please refer to the attached datasheet. The two duct connectors for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ducting is permitted per outlet for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm air furnace MARTINA 30 The MARTINA warm air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft operations. Dusdpfxevz Hqmj Aquou They are designed for heating larger usable spaces such as workshop halls and work areas of craft and industrial businesses. These warm air systems require no long heat-up phases and can heat joinery or carpentry shops, as well as other production facilities, within a short time. Solid wood and its by-products—such as remnants of solid wood panels, shavings, sawdust, pellets, or briquettes—serve as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37/EC (Italian Presidential Decree No. 459 of July 24, 1996) and the safety directive of Directive 89/392/EEC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the required emission limits of the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 29.8 kW - Thermal output (kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Warm air fan: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Required draught at nominal output: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (outlet): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached datasheet The two pipe outlets for outgoing warm air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per pipe outlet is permitted for air distribution.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. These units are specifically designed for heating larger utility spaces such as factory halls and workspaces in trade and industrial operations. These warm air systems require no lengthy heat-up phase and quickly warm the workshop, joinery, carpentry, or other production spaces. Approved fuels include solid wood and its byproducts, e.g., offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392EC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st Federal Immission Control Ordinance (BImSchV) regarding required emission values. - Automatic and continuous fan operation - Thermal output: 14.8 kW - Thermal output Kcal: 12,720 - Fuel consumption: 4.5 kg/h - Air output: 2,400 m³/h - Firebox depth: 580 mm - Loading door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Required flue draft (nominal rating): 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Required installation space: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg Dodpsvz Hqtefx Aqueuu - Flue pipe diameter (connection): 160 mm - Chimney diameter (suggested): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet nozzles: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet. The two warm air outlet connections are located at the rear of the furnace, towards the bottom section. A maximum of 20 meters of ducting per outlet is permitted for distributing the warm air.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft enterprises. They are specifically designed for heating large utility areas such as production halls and workspaces in both craft and industrial businesses. These hot air systems require no extended preheating phases and can heat joinery workshops, carpentry shops, and other production sites in a very short period of time. Fuel sources include solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and safety regulation Directive 89/392 CE. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1,400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2–0.3 mbar Dusdpfx Aevz Hqyoqueu - Draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space required: width 1,700 mm, depth 2,000 mm, height 2,550 mm - Weight: 1,400 kg - Flue gas pipe diameter (connection): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85–90% - Required chimney overpressure: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For more specifications, please refer to the attached datasheet The two pipe connections for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ductwork per outlet is permitted for air distribution. Greater lengths are optionally available in consultation with the manufacturer. Please contact us for further information.

Koşul: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Warm air furnace MARTINA 55 The MARTINA warm air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft operations. They have been designed for heating large workspaces, such as workshops and work areas in craft and industrial businesses. These warm air systems require no lengthy heat-up phases and can quickly heat joiner’s or carpenter’s workshops as well as other production facilities. Solid wood and its byproducts—such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes—are used as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, and the safety requirements of Directive 89/392/EEC. All warm air furnaces in the MARTINA series—models 15, 30, 55, 85, 120, 180, 240, and 350—meet all emission standards required by both stages of the German 1st Federal Immission Control Ordinance (BImSchV). - Fully automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output (kcal): 43,000 - Fuel consumption: 15 kg/h - Airflow: 4,900 m³/h - Combustion chamber depth: 650 mm - Insertion door: 370 x 350 mm - Warm air blower: 1.12 kW / 230 V Dujdovz Hq Hopfx Aquju - Fire chamber negative pressure: 0.2–0.3 mbar - Flue draft, rated output: 0.18 mbar - Heatable room volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Footprint: width 720 mm, depth 1000 mm, height 1900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (reference): 200 mm - Efficiency: 85–90% - Chimney draft pressure: 13 PA - Flue gas temperature: 290°C - Warm air outlet connectors: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet. The two warm air outlet duct connectors are located at the rear of the furnace near the bottom. A maximum of 20 meters of duct per air outlet is permitted for air distribution.

Koşul: iyi (kullanılmış), makine/araç numarası: 169693, Heidelberg kabartma baskı plakası TP, makine numarası T169693+ Heidelberg kabartma baskı plakası TP,T191298, makine iyi durumda, hemen teslime hazır İlginizi çekerse firmamızın diğer makineleri hakkında da bilgi vermekten mutluluk duyarız. Önceden randevu alarak makineyi tesislerimizde görebilirsiniz. Duedpfx Asvvikfequsu

Koşul: mükemmel (kullanılmış), Üretim yılı: 2007, Mold Masters Hotrunner harici 3 bölgeli hotrunner TMXL-3/3-0 Elimizde 7 adet mevcuttur mevcut birimler Dusdpfovax Izex Aqueu

Koşul: ikinci el, Üretim yılı: 1992, Kapama kuvveti 600 kN Bağlama plakası 460x460 mm Kolonlar arası mesafe 300x300 mm Makine ağırlığı yaklaşık 4,5 ton Kapama stroku 230 mm İtici kuvveti 40 kN İtici stroku 70 mm Kalıp yüksekliği 120-350 mm Kolon çapı 56 mm Döküm kuvveti 55 kN Duodpjfrvzvofx Aquou Döküm stroku 130 mm Piston çapı 45,50,55 mm Döküm hacmi (DIN 24480) 76,121,165 cm² Spesifik döküm basıncı 345,280,231 kp/cm² İlgili ayırma yüzeyi 174,214,260 cm² İniş stroku 150 mm İkinci el DAW 50 enjeksiyon döküm makinesi, SBC2 kontrol ünitesiyle birlikte, çinko alaşımlarının kullanımına uygundur. İkinci el makine stoklarımızda mevcuttur. Makine, Rauch markalı MO50E elektrikli fırın ve kullanılmış Oskar Frech marka 401 pnömatik püskürtme cihazı ile donatılmıştır. Üretici tarafından genel bir revizyon önerilmektedir. Revizyon kapsamı, karşılıklı anlaşmaya bağlı olarak gerçekleştirilebilir.

Koşul: iyi (kullanılmış), Isıtma veya soğutma plakası Boyutlar: 1.600 x 600 x 50 mm Kanallar: 6 Masa / alt yapı: 1.600 x 600 x 820 mm Dujdpfx Aqolnfhzouou Kullanım: sıcak veya soğuk su ile doldurmak için uygundur

Koşul: yeni, Üretim yılı: 2026, Hot air generator, warm air heater, workshop heater, hall heater Model F28 - F55CV - F85CV - F120CV - F240CV BRAND NEW machines 2026. NEW LIST PRICES WHILE STOCKS LAST, I GUARANTEE THE 2024 LIST PRICES Super discount as long as stocks last 100% made in ITALY The machines run on wood Immediate delivery For heating halls, warehouses, workspaces, and private rooms Fuels: wood, wood chips, paper, cardboard Duedpfx Aqef H Hlrjusu CE-compliant machines: YES Voltage: 220 V single phase (model F28 and F55CV) Voltage: 380 V (model F85CV - F120CV - F240CV) CV models are equipped with an additional fan for smoke extraction at the base of the flue Available models: F28. Heating area up to 100/150 m² F55CV. Heating area up to 300/350 m² F85CV. Heating area up to 450/500 m² F120CV. Heating area up to 650/700 m² F240CV. Heating area up to 1000 m² Technical design features: Horizontal stove made of rustproof, thermal chrome steel, with reinforcing ribs. Two- or three-pass heat exchangers. Interior lining made of polished sheet metal for intermediate space and insulation. Exterior casing made of painted or galvanized sheet metal. Frame made of painted profiles. Loading doors with fireproof material and removable grates. Panels with fireproof material for tube cleaning. Centrifugal fans with double suction for warm air distribution, operating at low speed and mounted on special elastic suspensions, driven by one or more electric motors. Electrical control panel – adjustable thermostat. Maintenance: Routine maintenance consists of removing the accumulated ash by opening the door. A general cleaning of the tubes should be performed once or twice a year.

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2018, Dynajet 500th Basınçlı Yıkama Makinesi Üretim yılı: 2018 Maksimum sıcaklık aralığı: 95°C Marka: Dynajet Mobil: evet Seri numarası: 62005720 Model: 500th Dodpfx Ajyigr Usqujuu Maksimum çalışma basıncı: 500 bar Uzaktan kumandalı; 1000 l su tankı; Boş ağırlık 1420 kg; yaklaşık 30 m yüksek basınç hortumu; yaklaşık 25 m dolum hortumu; Toplam 597 saat çalışmıştır; Test edilmiş ve çalışır durumda.

Koşul: ikinci el, Üretim yılı: 2009, Genel Bakış  Bu döner Roll-to-Roll etiketleme makinesi 2009 yılında Fransa'da SIDEL tarafından üretilmiştir. Rollquattro F15 18T, içecek dolum tesislerinde PET şişelerin Roll-to-Roll etiketlemesi için tasarlanmıştır. Makine, 18 şişe plakalı bir döner sistemle çalışmakta olup, mekanik kam kontrollü ve manuel etiket beslemeli olarak donatılmıştır.  Teknik Veriler Kapasite: yaklaşık 18.000 şişe/saat Formatlar: 0,5 l / 1,0 l / 1,5 l / 2,0 l Uygulama: PET şişelerde rulo etiketleme Konfigürasyon: 18 plakalı, mekanik kam tahrikli, manuel etiket besleyicili döner makine Bağlantı verileri: 400 V / 50 Hz / 23 kW / 46 A Teslimat Kapsamı  Etiketleme makinesi | SIDEL | Rollquattro F15 18T | 2009 | 18 plakalı döner etiketleme makinesi Soğutma ünitesi | Kelvin Cool-Power | Harici soğutma ünitesi Kontrol sistemi | Proses göstergeli kontrol paneli Dujdjyyb Snopfx Aqueu

Koşul: ikinci el, makine/araç numarası: 007346, Maksimum. işlenebilir uzunluk: 3500 mm Maksimum. işlenebilir genişlik: 1300 mm Isıtma sistemi: elektrikli kazan Dodev Akwgepfx Aqusuu Uygulanan basınç: 2,35 Kg/cm2 Baskı silindiri sayısı: 8

Koşul: yeni gibi (sergi parçası), Üretim yılı: 2026, çalışma saatleri: 1 h, - Basınçlı yıkama PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam ve TORPEDO MINI-E 5.8 T 400/50 Powersteam benzer ancak Dynajet, Oertzen, Falch, ... - 140'a kadar soğuk su / sıcak su / buhar 32 bar Temizleme ve dezenfeksiyon için ° C / yüksek basınçlı buhar 150 veya 200 bar ila 150 ° C Aşağıdaki modeller mevcuttur: - TORPEDO MINI-E 3.8 M 230Volt / 50Hz Powersteam 8 l / dak. 150 bar'da - TORPEDO MINI-E 5.8 T 400 Volt / 50Hz Powersteam 8 l / dk. 200 bar'da - Boyutlar ve boş ağırlık: 110x64x98cm, yaklaşık. 150kg - dahil. 10 m yüksek basınç hortumu, püskürtme tabancası, boru ve düz jet nozulu 25 °. Dodpfxsfh Skas Aqusuu

Koşul: yeni, Sıcak damgalama ile TYMC-1200 kalıp kesme makinesi Kilitli "bal peteği" plakalı en son versiyon. Makine, ısıtma plakasını çıkarmaya gerek kalmadan sıcak bıçak kalıp kesme ve standart kalıp kesme için tasarlanmıştır. Format: kalıp kesimi 1230x850mm sıcak damgalama 1100x780mm Ağırlık 6000 kg Duedjwxtb Espfx Aqusu Çalışma hızı 23 çevrim/dak Folyo hareketi 1-820mm Çalışma sıcaklığı 1-150’C Güç kaynağı 380V Ekipman: – elektromanyetik kavrama ve fren – hızlı montaj çerçevesi – dokunmatik PLC programlayıcılı kontrol paneli – adım motorları tarafından kontrol edilen üç bağımsız folyo çekme sistemi – 3 çalışma modu: sürekli, zaman gecikmeli, manuel – 6 ısıtma plakası bölümü, enerji tasarrufu – merkezi yağlama – ek güvenlik kapakları – fotoseller – çalışma aletleri ve talimatları, CE beyanı – basınç sayfası Makine hemen kullanılabilir 12 ay garanti.

Koşul: mükemmel (kullanılmış), Teklif şunları içermektedir: PZ-82 (57x82cm), mükemmel durumda sıcak yaldız baskı silindiri, hemen teslim edilebilir, test imkanı vardır. Dujdsynuudopfx Aqueu

Koşul: mükemmel (kullanılmış), Üretim yılı: 2005, V4A'dan yapılmış sıcak su tankı/ısı depolama tankı, dik Teknik veriler / boyutlar Mevcut miktar: 1 Hacim: yaklaşık 164.000 litre Tank tipi: Depolama tankı Durum: kullanılmış Gıda için uygun: evet Tasarım: dik İç çap: yaklaşık 3.900 mm Dış çap: yaklaşık 4.200 mm Silindirik yükseklik: yaklaşık 13.000 mm Toplam yükseklik: yaklaşık 17.220 mm Ağırlık: yaklaşık 10.500 kg Ortamın özgül ağırlığı: 1,0 to/m³ Çalışma basıncı: basınçsız Gövde / silindir duvar kalınlığı: yaklaşık 5,3 - 7 mm mm Yerden yükseklik: yaklaşık 1.800 mm Çalışma sıcaklığı: -10°C/+90°C santigrat derece Malzeme / bileşim Malzeme iç muhafaza: V4A (1.4571) Malzeme çift ceket: Paslanmaz çelik İç yüzey: 2B Kaynak dikişleri iç kısımda taşlanmış İzolasyon İzolasyon mevcut Yalıtım kalınlığı: yaklaşık 100 mm Yalıtım malzemesi: Mineral yün Yalıtım kılıfı malzemesi: Alüminyum Yalıtım kılıfı: vidalı/perçinli Notlar: Koni tavan kaplaması: Paslanmaz çelik Silindir kaplaması: Alüminyum trapez sac Koni kaplaması: Pürüzsüz alüminyum levha Ekipman Stand formu: Ayak halkası/stand çerçevesi Sabitleme: sabit Üst raf tipi: Konik taban Alt raf tipi: Konik taban Üst kat: 1 x DN 200 izolasyon kapaklı kubbe 1 x kubbeye kaynaklı DN 32 flanş (CIP) 1 x DN 32 kubbe drenajı 1 x DN 50 kablo kanalı 1 x taşma DN 150 2 x vinç gözü Ceket: Dujdpoqagl Hsfx Aqueu 1 x giriş borusu DN 100 1 x DN 100 dolum borusu 4 x yalıtım kutulu termometre kovanı (ø 26 mm) 1 x CIP borusu DN 32 1 x tip plakası 1 x erişim kapısı (yaklaşık 2.000 x 1.000 mm) 1 x DN 100 çıkış nozulu Zemin altı: 1 x döner koni DN 450, düz flanş DN 100 ile sonlanır Notlar: Aksi takdirde resim ve çizime göre dokümantasyon Çizim

Üretim yılı: 2022, Koşul: işlem için hazır (kullanılmış), Gıda endüstrisi için entegre Twist-Off kapaklayıcıya sahip 12 istasyonlu yerçekimli ve düşey basınçlı dolum makinesiyle tam bir dolum hattı mevcuttur. Dolum noktası: 12, Yapı tipi: döner, Sıvı vizkozitesi: ince-orta, Dolum kapasitesi: yaklaşık 2000 şişe/saat, Kapaklama kapasitesi: yaklaşık 1000–1200/saat, Tank: ısı yalıtımlı, Tank hacmi: 35l/50l. Bu, taşıma bantları, toplama masası, sensörler, döner masalar, pompalar ve format parçalar dahil eksiksiz bir dolum hattıdır. Hat, 2024 yılında devre dışı bırakılmıştır. Dokümantasyon mevcuttur. Yerinde inceleme mümkündür. Dujdpfx Ajy Ax Ufequsu

Koşul: ikinci el, Üretim yılı: 2000, Clamping force: 900 kN Clamping platen: 540 x 540 mm Tie bar spacing: 350 x 350 mm Machine weight: approx. 5.5 t Clamping stroke: 280 mm Ejector force: 60 kN Ejector stroke: 70 mm Mould height: 160–400 mm Tie bar diameter: 65 mm Casting force: 75 kN Casting stroke: 130 mm Casting piston diameter: 50, 55, 60 mm Duedsyzt D Eopfx Aqusu Casting volume (DIN 24480): 119, 163, 214 cm³ Specific casting pressure: 380, 315, 265 kp/cm² Corresponding parting area: 236, 285, 340 cm² Retraction stroke: 150 mm Completely overhauled DAW 80 GO die casting machine with DataLogic control system, suitable for processing zinc alloys. Scope of overhaul includes: • Upgrade with new control cabinet and new operator panel including replacement of all electrical wiring • Renewal of hydraulics (blocks and valves) • Overhaul of the clamping unit Detailed information available upon request The machine is equipped with the following options: - Motor-driven safety door, casting direction left - Discharge chute cover on machine base (straight) - Free-standing operator panel 1.0.2 Discharge chute cover on machine base 3.2.4 Multi-chamber holding and melting furnace with TOC pump 3.2.1 Furnace control cabinet for furnace type Z 4.0.1 Use of water-glycol 4.2. – Side GO 6.1.3.1 Wired signal interface for part removal (DISPO10) 6.5.2 Equipment package RSD with switch 7.2.2.2 Spraymotion 611 E with servo drive, single-circuit 7.3.1 Release agent container TD 20 7.4.0.3 Spray bar CR 275 Additional options can be offered upon request.