Alçak şasi dorse

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader 205er

You can find our complete range of vehicles, including those available immediately or at short notice, on our website.

Excerpt from the equipment list. Full specifications available on request.

Gooseneck
* With approx. 45° chamfered front corners and rear bevel measuring approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick

Loading platform
Loading platform in extendable design
* 5 pairs of fold-out lashing rings on the sides (LC 5,000 daN)
* 3 pairs of fold-out lashing rings on the sides (LC 10,000 daN)
* 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN)
* Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over the axles fitted with checker plate

Landing legs
* JOST (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)

Axles
* BPW axles, two rigid, two self-steering trailing axles, with drum brakes
* Air suspension with lifting/lowering function
* Self-steering axle with electromagnetically operated reversing lock, activated via reverse gear or manually
* Tyres: 205/65 R 17.5

Brake system
* Wabco braking system in accordance with EU regulations, equipped with EBS-E (4S3M), without connection lines to the tractor unit

Steel construction
* Made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)

Paintwork
* First-class, durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer
* High-quality 2-component (2K) single-color finishing coat in RAL 3002 Carmine Red
* Rear section metallized and painted in RAL 9010 (Pure White)
* Wheel rims in silver

Included accessories
* 2-inch king pin
* Galvanized steel front wall, approx. 400 mm high
* Spare wheel holder in front of the front wall
* Yellow-red air couplings on the galvanized connection bar at the front
* 4 wheel chocks with holder set on the front wall
* Mount at the rear of the gooseneck for aluminum loading ramps
* Galvanized folding supports under the loading platform bevel
* Holder for beacon light at the rear of the trailer
* Yellow reflector tape on the sides, extension and rear of the trailer, in accordance with EU regulations
* On both sides of the gooseneck and rear panel, holder for warning plates including socket
* TPMS tire pressure monitoring system in accordance with ECE R 141. Data transmission to the truck via the standardized EBS interface (ISO 11992); for correct display, the truck must be able to receive and display this data
Ljdju Sd U Uepfx Ad Rjhn
* On the gooseneck: removable aluminum side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stanchions are removable. (Body length approx. 2,560 mm)
* Galvanized toolbox integrated into the beveled gooseneck
* 6 pairs of WADER container pockets in the loading platform for accommodating 1 x 20' container, 2 x 20' containers, or 1 x 40' container
* Sliding mounting rails for aluminum loading ramps at the rear of the vehicle
* 7 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform
* Galvanized crosswise holder under the loading platform
* Galvanized extendable wideners, extendable by approx. 230 mm per side
* Lift axle on the front axle with TEBS E control, depending on the current axle load and load condition
* 5 pairs of rec

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.