Alçak şasi dorse

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Hebebett

Durumu: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, Equipment Overview Gooseneck: - Gooseneck with front corners bevelled at approx. 45° and rear bevel approx. 750 mm x 10°. - 3 pairs of lashing rings (LC 5,000 daN). - Hardwood flooring approx. 30 mm thick. Load Area: - Load area behind gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8°. - 6 pairs of folding lashing rings to the outside (LC 5,000 daN). - 2 pairs of folding lashing rings to the outside (LC 10,000 daN). - 1 pair of folding lashing rings folding inward at the centre beam front (LC 10,000 daN). - Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN). - Grating floor covering C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checker plate covering above the axles. Two-piece Steel Ramps: - One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating floor C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm). - Ramp sections foldable in and out hydraulically. - Hydraulic lifting unit, hydraulically traversable. - Maximum load per pair: approx. 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load). Axles: - BPW axles and suspension, 2 fixed axles, 1 self-steering trailing axle. - Technical axle load: 12,000 kg per axle - Electromagnetic reversing lock, activated via reverse gear and manually. - Air suspension with lifting and lowering valve. Brake System: - WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: - Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: - TPMS tyre pressure monitoring system to ECE R 141. Paintwork: - HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure best corrosion protection. - Top coat: 2-layer 2K paint, single colour in RAL 3002 Carmine red, according to RAL 841GL. Rims in silver grey. Accessories Incl.: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high. - Grating floor in the gooseneck slope C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm). - Grating floor in the platform’s bevel C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm). - Electro-hydraulic unit at the rear under the platform. Cgedpfsyhkrrex Afkon On the gooseneck: plug-in aluminum side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stakes are removable. (Body length approx. 2,560 mm). (±46 kg) An electric cable winch with radio remote control, lifting capacity approx. 5,400 kg, including steel cable approx. 9.5 mm thick, approx. 24 m long, with cable guide roller (±88 kg) Bolted ring (approx. 5 t) for guiding the winch cable at the gooseneck without deflection pulley (±1 kg) A galvanized toolbox integrated in the gooseneck slope with opening for a cable winch (±53 kg) Grating floor on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) (±355 kg) 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the load area (±21 kg) Lift axle at the front axle controlled by TEBS E, depending on current axle load and current payload (±69 kg) 7 pairs of recessed lashing rings along the centre beam (LC 5,000 daN) (±35 kg) - 2 pairs in the lift bed - 5 pairs at the rear of the load area 1 pair of recessed lashing rings at the rear along the centre beam...