Kullanılmış Elumatec Alüminyum Testere Elumatec Mgs 205 satın al (8.741)

Koşul: iyi (kullanılmış), Üretim yılı: 2015, Fonksiyonellik: tamamen fonksiyonel, testere bıçağı çapı: 600 mm, 90°'de yuvarlak çelik kesme aralığı: 220 mm, Satılık: 1 adet kullanılmış CNC alüminyum tam otomatik daire testere, emiş ünitesi dahil Üretici: Tronzadoras MG Model: GAA-600 - CNC ÜRETIM YILI: 2015 TEKNİK BİLGİLER - Kesme aralığı yuvarlak: 220mm, kutu: 300 x 90mm, kare: 175mm - Tahrik gücü 4,1 KW / 400 V / 50 Hz Nwsdpjuyyhajfx Akneg - Hız 3000 rpm. - Kesme hızı 55 m/sn. - Bıçak boyutları 600 x 50 mm - maks. kesme yüksekliği 220 mm - Boyut 2020 x 1510 x 975 mm - Ağırlık 650 kg Makine, 6 m besleme rulolu konveyörü ve uygun ekstraksiyon sistemi ile birlikte gelir. Testere 09599 Freiberg'deki depomuzda incelenebilir.

Koşul: ikinci el, Üretim yılı: 2012, Testere bıçağı çapı 400 mm 90 derece kesim aralığı: yuvarlak 130 mm Nedpfxjy N D Nhe Aknswg 90 derece kesim aralığı: kare 110 mm 90 derece kesim aralığı: düz 180 x 100 mm Testere bıçağı devir sayısı 3000 d/dk Toplam güç ihtiyacı 2,2 kW Makine ağırlığı yaklaşık 0,51 t Boyutlar U x G x Y 3,8 x 1,6 x 1,7 m Otomatik alüminyum dairesel testere - El çarkı, katlanabilir dayanak ve dijital sistemli 4000 mm çıkış makaralı konveyör - 3500 mm giriş makaralı konveyör - Taşıma ölçüleri 6,0 m x 2,0 m x 1,6 m

Koşul: yeni gibi (kullanılmış), Üretim yılı: 2017, İkinci el otomatik alüminyum daire testere MEP Cobra 352 nc 5.0 Üretim yılı: 2017 Bıçak boyutları: 350x32x3,4 mm Bıçak kesim hızı: 1700/3400 rpm Kesim açısı: -45° ile +45° arası Kesim kapasitesi 0°’de: yuvarlak: 120 mm, kare: 105 mm, dikdörtgen: 180x70 mm Dokunmatik ekran Makine ağırlığı: 605 kg Nwsdpowu Tz Rjfx Aknsg

Koşul: yeni, Üretim yılı: 2026, Kesmeniz gereken iş ne olursa olsun, A700 ihtiyacınız olan tek testeredir. Sınıfının en büyük kapasitesine ve devasa ±75º gönye açısı aralığı özelliğine sahip olan bu ürün, kesmeniz gerekebilecek alüminyum profillerin boyutundan ödün vermeden gerçek yüksek gönye açılı kesim için tasarlanmıştır. Çok sayıda profili aynı anda ve yüksek hassasiyetle kesmek için uygundur. Hassas PLC kontrollü hareket ile yüksek hızlı alüminyum işleme. Pnömatik tahrikli güvenlik koruması, testere tablasına tam engelsiz erişim için bir düğmeye basarak açılır ve kapanır. Koruma kaldırıldığında testereyi devre dışı bırakan güvenlik anahtarı. Dokunmatik ekran kontrolü ile isteğe bağlı CNC kontrollü testere gönye açısı konumlandırma. - Ø700 mm TCT testere bıçağı, 4 kW tahrik motoru ile - AS / NZS 4024:2014 güvenlik standardı, iki elle presle kesme işlemi - Testerenin her iki yanında 900 mm'lik güvenlik tünellerine sahip baş üstü güvenlik koruması - Bir düğmeye basılarak pnömatik olarak kaldırılabilen güvenlik koruması - Koruma yukarıdayken testere çalışmasını devre dışı bırakan güvenlik anahtarı - Ayarlanabilir kelepçe basıncına sahip 2x dikey ve isteğe bağlı 2x yatay kelepçe - 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75°'de pim yerleştirme ile ±75° gönye açısı - Sprey sisli bıçak yağlama sistemi - Hava tabancası ve LED iç aydınlatma - Talaş toplama için 2× Ø100 mm bağlantı noktaları - Opsiyonel 2,2 kW talaş vakum çıkarıcı - Opsiyonel otomatik gönye kontrol sistemi Njdemb U Tujpfx Aknowg Şunlar için son derece uygundur: - Dökme alüminyum üretimi - Gönyeli alüminyum yapı imalatı - Pencere ve kapı imalatı - Panjur, gölgelik ve mobilya imalatı - Fabrikasyon alüminyum yapı imalatı - Alüminyum cephe imalatı

Koşul: yeni, Üretim yılı: 2026, Alüminyum kesim verimliliğinizi en esnek, geniş kapasiteli testerelerden biriyle artırın. A550, kesmeniz gerekebilecek alüminyum boyutundan ödün vermeden gerçek yüksek açılı kesim kapasitesi sağlamak için büyük kapasiteli bir bıçakla desteklenen ±75º'lik büyük bir testere gönye aralığı ile yüksek gönye açılı kesim için tasarlanmıştır. Birçok profili aynı anda ve yüksek hassasiyetle kesmek için uygundur. Hassas PLC kontrollü hareket ile yüksek hızlı alüminyum işleme. Tam engelsiz testere tablası erişimi için bir düğmeye basarak pnömatik tahrikli güvenlik koruması açma ve kapama. Güvenlik anahtarı, koruma yukarıdayken testereyi devre dışı bırakır. Dokunmatik ekran kontrolü ile isteğe bağlı CNC kontrollü testere gönye açısı konumlandırma. - Ø550 mm TCT testere bıçağı, 4 kW tahrik motoru ile - AS / NZS 4024:2014 güvenlik standardı, iki elle presle kesme işlemi - Testerenin her iki yanında 900 mm'lik güvenlik tünellerine sahip baş üstü güvenlik koruması - Bir düğmeye basılarak pnömatik olarak kaldırılabilen güvenlik koruması - Koruma yukarıdayken testere çalışmasını devre dışı bırakan güvenlik anahtarı - Ayarlanabilir kelepçe basıncına sahip 2x dikey ve isteğe bağlı 2x yatay kelepçe - 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75°'de pim yerleştirme ile ±75° gönye açısı - Sprey sisli bıçak yağlama sistemi - Hava tabancası ve LED iç aydınlatma - Talaş toplama için 2× Ø100 mm bağlantı noktaları - Opsiyonel 2,2 kW talaş vakum çıkarıcı - Opsiyonel otomatik gönye kontrol sistemi Nodpfx Aksmb U Tfonjwg Şunlar için son derece uygundur: - Pencere ve kapı imalatı - Gönyeli alüminyum yapı imalatı - Alüminyum fabrikasyon yapı imalatı - Kompozit üretimi - Panjur, gölgelik ve mobilya imalatı - Alüminyum perakende satışları

Koşul: yeni, Üretim yılı: 2026, Alüminyum üretiminizi yüksek hızlı, yüksek güvenlikli, İSG uyumlu bir testereye yükseltin. A420, düz veya gönyeli alüminyum parçaların (±75°'ye kadar) küçük profilli kesimi için kullanımı kolay bir testeredir. İki elle presle kesme ve tam testere koruması (her iki tarafta 900 mm tüneller dahil) ile yüksek güvenlikli çalışma, testereye erişimi ve kontrolsüz kesiklerin dışarı atılmasını önler. Pnömatik kaldırılabilir koruma tek bir düğmeye basarak açılır ve kapanır. Koruma yukarıdayken testereyi devre dışı bırakan güvenlik anahtarı. - Ø420 mm TCT testere bıçağı, 2,2 kW tahrik motoru ile Nwedemb U Tbjpfx Aknjg - AS / NZS 4024:2014 güvenlik standardı, iki elle presle kesme işlemi - Testerenin her iki yanında 900 mm'lik güvenlik tünellerine sahip baş üstü güvenlik korumaları - Engelsiz testere tablası erişimi için bir düğmeye basılarak kaldırılabilen güvenlik koruması - Koruma yukarıdayken testere çalışmasını devre dışı bırakan güvenlik anahtarı - Ayarlanabilir kelepçe basıncına sahip 2× dikey ve 2× yatay kelepçeler - Ayarlanabilir testere gönye açısı ±75° - Daha fazla kesme kapasitesi için hareketli arka çit - Sprey sisli bıçak yağlama sistemi - Hava tabancası ve LED iç aydınlatma - Talaş toplama için Ø100 mm bağlantı noktası - Opsiyonel 2,2 kW vakumlu talaş çıkarıcı Şunlar için son derece uygundur: - Pencere ve kapı imalatı - Ticari ofis üretimi - Veri merkezleri üretimi - Lineer aydınlatma üretimi - Panjur ve gölgelik imalatı - Kompozit üretimi

Koşul: yeni, Üretim yılı: 2023, SPECIAL PRICE, Stock machine model year 2023! List price standard machine + option Minimum Quantity Lubrication System "LUBETOOL": €28,810 STOCK MACHINE -- Fully automatic aluminium circular saw, 90° cutting with drilling unit TR 12 (up to ø 10 mm) or TR 20 (up to ø 20 mm) featuring simple, safe operation and outstanding cutting performance. This machine allows 90° cuts only! Workpieces can be drilled and cut in a single operation! Technical Data: Nwedpfxemftiwj Aknog ● Cutting area: 90° round: 100 mm / square: 100 x 100 mm / rectangular: 170 x 60 mm ● Drive power: 1.9 kW / 400 V / 50 Hz ● Speed: 3000 rpm ● Feed: Single stroke 300 mm (double stroke up to 600 mm) ● Max. cutting height: 100 mm ● Blade size: 350 x 32 mm Standard Equipment: ● Machine for 90° cuts, equipped with a powerful drive motor ● Ergonomically designed, large-format control panel ● Adjustment of cutting length from 5 to 300 mm via handwheel and counter ● Main vice with 3 pneumatic clamping cylinders, 1 horizontal, 2 vertical ● Feeding vice with both horizontal and vertical pneumatic clamping cylinders ● Large safety guard covering the entire working area, pneumatically lifted ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for extraction system ● TR 12 or TR 20, fixed automatic drilling unit with single tool holder; spindle speed, drilling depth, etc. set manually, drilling cycle runs automatically ● Optionally installed on the stock machine: Minimum Quantity Lubrication System "LUBETOOL" with two pumps --> Also available as CNC version or in various sizes!

Koşul: yeni, Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, toplam uzunluk: 1.000 mm, toplam genişlik: 600 mm, toplam yükseklik: 1.400 mm, 45°'de yuvarlak çelik kesim aralığı: 90 mm, kesme yüksekliği (maks.): 105 mm, testere tahriki: 4.700 W, boş ağırlık: 200 kg, COSEN KREISSÄGEN MANUELL MC-315 Diese Kreissägen sind neu im COSEN-Portfolio und in manueller Ausführung erhältlich, d.h., der Hebel muss zum Sägen per Hand nach unten gezogen werden. Technische Merkmale: Kompakte, säulenmontierte, handbetriebene Kreissägen, die sich einfach in der Werkstatt oder auch in der Produktion handhaben lassen. Handbetätigte Spanneinrichtung Schwerlast-Motor Robuste Bauweise Niederspannungs-Ein/Aus-Schalter Gehrungsschnitte 45° und 90° Zwei Schnittgeschwindigkeiten Elektrische Kühlschmiermittelpumpe mit Tank COSEN MC-315 NETZSPANNUNG: 400V SÄGEBLATTDURCHMESSER: 315 mm MOTORLEISTUNG: 4,7 kW ABMESSUNGEN: 1000 x 600 x 1400 mm GEWICHT: 200 kg DREHZAHL: 45/90 U/min MAXIMALE SCHNITTLEISTUNG Nwjdpfx Akov R Dxajnsg RUNDMATERIAL 90°: 105 mm; 45°: 90 mm VIERKANTMATERIAL 90°: 85 x 85 mm; 45°: 80 x 80 mm RECHTECKMATERIAL 90°: 120 x 60 mm; 45°: 90 x 60 mm Preis ist EXW (Lager Europa), inkl. Verladung auf Lkw. Transport, Installation, Inbetriebnahme, Schulung sowie jährliche Wartungsverträge sind auf Anfrage gegen Aufpreis erhältlich. Installation und Schulung erfolgen stets durch unser hochqualifiziertes Serviceteam an drei Standorten in Europa: Niederlande, Deutschland, Rumänien.

Koşul: iyi (kullanılmış), Üretim yılı: 2009, Fonksiyonellik: tamamen fonksiyonel, testere bıçağı çapı: 500 mm, Donanım: dokümantasyon / kılavuz, Teknik veriler ve kesim diyagramı yan taraftan indirilebilir. Her strokta 730 mm, 3 tekrarla sınırlıdır. Testere bıçakları Ø 500 x 4,4 x 30 mm Kesim yalnızca 90° açıda yapılabilir. Nwsdpfey D Sywox Aknog 3 tekrar ile maksimum kesim uzunluğu: 2180 mm

Koşul: mükemmel (kullanılmış), Üretim yılı: 2016, Fonksiyonellik: tamamen fonksiyonel, testere bıçağı çapı: 500 mm, Çift açılı alüminyum daire testere yarı otomatik model Açı aralığı 90° -45° sağ/sol, -60° sol tahrik 4,0 kW-400 V/50 Hz testere bıçağı hızı 50 m/s testere bıçağı ölçüleri Ø 500 x 30 x 4,0 mm boyutlar 1488x960x1540 mm masa yüksekliği 1067 mm ağırlık 500 kg Aksesuarlar: - 5 m giriş makaralı konveyör 230 mm - 3 m çıkış makaralı konveyör 230 mm, dijital ölçüm dayanağı ile Nwodoy Av T Espfx Aknog

Koşul: ikinci el, Saw blade diameter: 350 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 mm Cutting capacity at 45 degrees: square 100 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Saw blade speeds: 1700 / 3400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 0.210 t Dimensions (L x W x H): 0.9 x 1.4 x 1.4 m Manual circular saw for cutting aluminium, mitre cuts from 45° right to 45° left and saw head swivel range from 0° to 45° to the left. On the Cobra 352 MA (with automatic vice), the vices close automatically when the saw head is lowered. • Roll-bearing turntable for fast and precise mitre adjustment • Screw locking mechanism to lock the saw head in any angle position • Automatic saw blade lubrication • Clamping system consists of two vices Nedpfx Aofc T Ufjknowg • Saw head lock in upper position • Adjustable length stop for identical cut lengths • Vice opening: 180 mm

Üretim yılı: 2004, Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, 2004 Elumatec AKS 134 Kerb- und Ausschnittsäge – Hochpräzises Ausklinken für Fassaden, Lichtkuppeln & Wintergärten Hersteller: Elumatec Modell: AKS 134 Baujahr: 2004 Zustand: Sehr gut Nwjdpoxyupksfx Aknog Jetzt verfügbar: Elumatec AKS 134 Kerb- und Ausschnittsäge, Baujahr 2004, in sehr gutem Zustand. Diese solide, in Deutschland entwickelte Maschine ist speziell für das präzise Ausklinken von Aluminiumprofilen konzipiert und richtet sich an Verarbeiter im Bereich Fassadenbau, Wintergärten, Lichtkuppeln sowie anderen komplexen architektonischen Aluminiumkonstruktionen. Die AKS 134 verfügt über eine Doppel-Sägeeinheit – vertikal und horizontal – und bietet somit außergewöhnliche Flexibilität, präzise Winkeleinstellungen und eine sichere Bedienung. In Kombination mit digitalen Winkelanzeigen, hydro-pneumatischem Vorschub und automatisierten Schnittzyklen ist sie die Premium-Wahl für anspruchsvolle Aluminiumverarbeiter. 🛠️ Wichtige technische Daten: 🔻 Untere, vertikale Sägemodul: Sägeblatt-Durchmesser: 550 mm Schwenkbereich: +45° nach vorne bis -60° nach hinten Max. Schnitthöhe: 210 mm Motorleistung: 3 kW (mit Motorbremse) Drehzahl: 2.800 U/min Manuelle Schwenkverstellung mit Digitalanzeige 400V, 3~, 50 Hz 🔺 Obere, horizontale Sägemodul: Sägeblatt-Durchmesser: 500 mm Schwenkbereich: +55° nach unten bis -60° nach oben Max. Ausklinktiefe: 190 mm Motorleistung: 3 kW (mit Motorbremse) Drehzahl: 2.800 U/min Verfahrweg: bis zu 830 mm Manuelle Schwenkverstellung mit Digitalanzeige 400V, 3~, 50 Hz ⚙️ Maschinenausstattung: Doppelte Sägeblätter für vielseitige und komplexe Ausklinkarbeiten Feststehendes Werkstück – nur die Sägeeinheiten bewegen sich, für maximale Präzision Gleichzeitige Höhenverstellung der vertikalen Sägemodul über Handrad (mit Analoganzeige) Digitale Winkelanzeige für beide Sägen sowie schwenkbaren Anschlag Manuell verstellbarer Auflagetisch Horizontale und vertikale pneumatische Spannvorrichtungen Automatischer Schnittzyklus bei 90° mit Zwei-Hand-Sicherheits-Steuerung für Winkelschnitte Hydro-pneumatischer Sägevorschub für gleichmäßigen, ruhigen Lauf Druckluftanschluss: 7 bar (35–45L pro Zyklus) 📏 Maschinenabmessungen & Gewicht: Stellfläche: 3.000 × 1.420 × 1.600 mm Gewicht: 1.250 kg 🏗️ Ideal geeignet für: Aluminium-Fassaden- und Vorhangfassadenhersteller Hersteller von Lichtkuppeln und Wintergärten Präzise Ausklinkanwendungen in Aluminium Werkstattumgebungen mit Bedarf an Mehrwinkel-Bearbeitung bei hoher Stückzahl 🧰 Die Elumatec AKS 134 ist zuverlässig, präzise und für anspruchsvollste Anwendungen im architektonischen Aluminium-Bereich ausgelegt. Elumatec AKS 134 zu verkaufen Aluminium-Ausklinkmaschine Irland Fassadensäge für Ausklinkarbeiten Elumatec Säge für Vorhangfassadensysteme Ausklinksäge für Aluminiumprofile Elumatec AKS 134 technische Daten 550 mm Ausklinksäge Doppelsäge-Ausklinkmaschine Gebrauchte Elumatec Maschinen Aluminium-Bausäge Hinweis: *Alle Angaben erfolgen nach bestem Wissen, jedoch ohne Gewähr.*

Koşul: mükemmel (kullanılmış), Üretim yılı: 2000, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 11900715/C, testere bıçağı çapı: 350 mm, besleme uzunluğu X ekseni: 180 mm, Z ekseni ilerleme mesafesi: 170 mm, toplam uzunluk: 2.210 mm, toplam genişlik: 1.100 mm, toplam yükseklik: 1.550 mm, 90°'de yuvarlak çelik kesme aralığı: 120 mm, 45°'de yuvarlak çelik kesim aralığı: 120 mm, giriş akımı türü: trifaze, dönme hızı (dk.): 15 dev/dak, dönüş hızı (maks.): 90 dev/dak, kesme yüksekliği (maks.): 170 mm, toplam ağırlık: 530 kg, testere bıçağı hızı: 90 dev/dak, giriş voltajı: 400 V, 45°'de kare çelik kesme aralığı: 100 mm, 90°'de kare çelik kesme aralığı: 105 mm, testere tahriki: 2.200 W, kesme çapı: 120 mm, testere dişli deliği: 32 mm, 2000 MEP Cobra 350AX Automatische Kreissäge für Kalttrennschnitte – Effizientes Metalltrennen für industrielle Produktion Jetzt verfügbar: MEP Cobra 350AX, eine robuste automatische Kreissäge, ideal für industrielle Metalltrennanwendungen. Baujahr 2000 und in gutem betriebsbereitem Zustand. Diese Maschine vereint manuelle und automatische Betriebsarten, individuell einstellbare Schnittparameter und ein 350-mm-Sägeblatt für durchgehend präzise und hochwertige Schnitte. 🔧 Hauptmerkmale: Sägeblattgröße: 350 × 32 × 2,5 mm Antriebsleistung: 2,2 kW Schnittgeschwindigkeiten: 15 / 30 / 45 / 90 U/min Spannweiten (Schraubstocköffnung): 160 mm Spannsystem: Pneumatisch Stromanschluss: 400V / 3-Phasen / 50 Hz Manueller & automatischer Betrieb: Ja Schnitttiefe & Anschlaghöhe: Vollständig einstellbar Maschinengewicht: 530 kg Maße (L×B×H): 2210 × 1100 × 1550 mm 📏 Schnittkapazitäten: Bei 0°: Rundmaterial: 120 mm Rechteckmaterial: 180 × 170 mm Nedpfx Akswtr Iyonjwg Quadratmaterial: 105 × 105 mm Bei 45° links: Rundmaterial: 120 mm Rechteckmaterial: 135 × 60 mm Quadratmaterial: 100 × 100 mm Bei 45° rechts: Rundmaterial: 110 mm Rechteckmaterial: 135 × 60 mm Quadratmaterial: 95 × 95 mm ⚙️ Geeignete Einsatzbereiche: Trennen von Stahlprofilen, Rohren und Stangen Perfekt für leichte bis mittlere Industrieproduktion Optimal für Schlossereien, Stahlhändler und Fertigungsbetriebe ✅ Warum die MEP Cobra 350AX? Vielseitige Schnittwinkel und -profile Doppelter Betriebsmodus (automatisch/manuell) Kompakte, effiziente Bauweise – problemlos in bestehende Produktionslinien integrierbar Pneumatische Spannung für gleichbleibende Sicherheit und Präzision Geringe Investitionskosten bei hohem Nutzwert MEP Cobra 350AX gebraucht Automatische Kreissäge gebraucht Kaltkreissäge für Metall Pneumatisch gespannte Kaltkreissäge 350-mm-Kreissäge für Metall Industrielle Metalltrennsäge MEP-Säge Baujahr 2000 Automatische Metallkreissäge Irland Kreissäge für Stahlprofile 400V Industrie-Kaltkreissäge *Hinweis: Alle Angaben wurden sorgfältig übernommen, sind jedoch ohne Gewähr*

Koşul: yeni, Üretim yılı: 2026, Yatay açılı ayarı 15°- 90°15° kademesiz, testere motoru 5,50 kW (400 Volt), testere bıçağı 600 mm, mesafe aralığı arka dayanak 180 mm, çalışma yüksekliği ayaklar üzerinden ayarlanabilir 940 ila 1000 mm, 2 x emiş bağlantısı (üstte kapakta ve altta), net ağırlık 600 kg, E x B x Y 135x140x150 cm, RAL 9007 gri alüminyum, döner tabla taşlanmış nikel çelikten, testere kafası yüksek hassasiyet, uzun ömür ve yüksek rijitlik için bilyalı kızaklarla donatılmıştır. Testere malzemesi, kapak açıkken düşük basınçla ön gerilebilir. Hidropnömatik bıçak ilerlemesi ve talaş akışı emiş başlığı yönünde. Mesajınızı bekliyoruz! Nsdefv T Anspfx Aknswg Plantec Maschinen GmbH

Koşul: yeni, Üretim yılı: 2026, Product innovation: Sawing System Type “ORIX” The ORIX sawing system enables fully automatic processing of a wide range of aluminium profiles. The machine is built on a robust base frame. For precise positioning of the saw unit, linear guides and precision carriages are utilized. The drives are equipped with servo motors. For sawing operations, the saw unit travels forward 300 mm along the Y-axis, allowing easy cutting of special profiles, plates, as well as Item and Bosch profiles. The support table consists of movable rollers, which are automatically positioned according to the desired cut length. All rollers are also mounted on precision carriages. The saw features a sturdy discharge table for depositing the cut aluminium parts. Optionally, the cut pieces can be automatically transported away—including swarf—via a conveyor belt. The machine offers a maximum cutting length of 6,000 mm, resulting in an overall length of 7,000 mm. The sawing system is supplied with a matching 2-channel minimum-quantity lubrication system. Additionally, it can be fitted with a 400 mm or 600 mm saw blade, depending on your requirements. Your Advantages: • Nearly scratch-free operation, as material is not pushed over a cast table Nedpjfu Tgrjfx Aknjwg • Improved removal of swarf (no extraction system required) • Extremely compact footprint: 4,000 mm / 7,000 mm • Smaller offcut (only 50 mm remnant length) • Safe operation (light curtain protection) • Easy material disposal (via conveyor or brush-equipped table) • No resetting required as with conventional automatic saws • No dimensional deviation • Plug-in rollers securely hold any type of special profile, ensuring perfect cuts Operating Procedure: Enter the desired profile length in the control system. The saw unit then moves to the specified position. The operator inserts the aluminium profile and starts the saw. Using an end-cut recognition sensor, the saw determines the correct initial cut position. The cut is performed. After sawing, the unit retracts and repositions itself for the next set coordinate, then repeats the cutting operation. These procedures are repeated until the entire profile is processed. All cut parts are gently placed on the discharge table or conveyor. Material clamping is performed directly at the saw unit using vertical and horizontal clamps, as is standard with aluminium saws. Once the profile is fully processed, the saw head automatically returns to the loading position for the next operation. The process can be repeated as required. Optionally, cross conveyors can be integrated for automated feeding. For safety, fencing or a light curtain can be installed. The control system is available in two versions: Diethei or Siemens control. Optional material sorting into different bins or by length is possible. You are always welcome to view the equipment at our manufacturing/demo facility. Contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Koşul: yeni, Üretim yılı: 2026, The fully automatic aluminium circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) has been specially developed for cutting profile and solid materials made of aluminium cast, copper, and hard plastics. The automatic feed and automatic cutting movement are ideal for fast and precise serial production! The material feed per stroke is up to 700 mm. Multiple strokes, and thus longer cut lengths, can be conveniently programmed from the operator panel. The main clamping vice secures the material with two horizontal and two vertical pneumatic cylinders, while the feed clamping system uses one horizontal and one vertical pneumatic cylinder. Both cutting and feed speeds can be adjusted according to the material through the large, user-friendly control panel! The machine is equipped with a mechanical stroke height adjustment, and the maximum cutting height is 100 mm. A large protective hood covers the entire working area and can be raised pneumatically at the push of a button! Standard equipment for the UK 350 A 90° CNC + drilling unit includes an air blow gun for cleaning the machine. Connections for a chip extraction system are provided. The machine is equipped with the TR 14 vertical drilling unit (drilling capacity up to ø 14 mm, thread M12), which is integrated into the cycle control of the aluminium circular saw. Equipment: • Machine for 90° cuts, with a powerful drive motor • CNC control; input of quantity and cut length is easily done from the large, clearly arranged operator panel! • Storage of up to 20 cutting programs • Feed drive via servo motor, single feed stroke 700 mm (for longer pieces, the feed automatically advances to the desired length!) • Main vice with four pneumatic clamping cylinders, two horizontal and two vertical • Feed vice with one horizontal and one vertical pneumatic clamping cylinder • Large protective hood covering the complete work area, pneumatically lifted • Cutting and feed speeds adjustable • Maximum cutting height 100 mm • Air blow gun for cleaning the machine • Connections for an extraction system • Saw blade diameter 350 mm • TR 14, fixed automatic drilling unit with tool holder • Spindle speed, drilling depth, etc. are set via the machine control, drilling cycle runs automatically Technical Data: Drive power: 1.9 kW / 400 V / 50 Hz Speed: 3000 rpm Blade dimensions: 350 x 32 mm Material feed single stroke: 700 mm Max. cutting height: 100 mm Dimensions: 1400 x 850 x 970 mm Njdpskqz H Djfx Aknowg Optionally available with loading magazine! We look forward to your enquiry! Plantec Maschinen GmbH

Koşul: yeni, Üretim yılı: 2026, Aluminium Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an “upcut” machine, primarily used for cutting profile materials made of cast aluminium, copper, and hard plastics (solid materials to a limited extent). This machine is characterized by its user-friendly operation and fast, convenient material changeover. Only 90° cuts are possible with this machine! Saw feed is automatic via push-button operation, and material clamping is performed with two pneumatically controlled vertical and horizontal clamping cylinders each. The standard equipment includes a minimum-quantity lubrication system and an air blow gun for cleaning the machine! The machine is also equipped with connections for a chip extraction system. Optional features include a digital mitre angle display, a marking laser, and pneumatic hood lifting. Features: - Large support table, high-performance drive motor - Two-button control for initiating the cutting cycle (optional single-button operation available) Nsdpfx Akjpa Nxdsnewg - Clearly arranged control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material stop jaw can be shifted to the rear to increase cutting capacity - Large safety guard covering the entire working area - Minimum-quantity lubrication system with 2-liter reservoir - Adjustable blade / feed rate - Air blow gun for machine cleaning - Saw blade diameter 600 mm Operating Procedure: 1. Set the cutting angle 2. Insert the material 3. Adjust the stroke speed 4. Move the clamping cylinders up to 20 mm to the material 5. Clamp the material 6. Press the start button to ready the machine. 7. Press and hold both cutting buttons, the material is sawn. 8. After the cycle ends, release both cutting buttons and press the STOP button 9. Open the vice and remove or reposition the material For technical data such as cutting range, power output, etc., please refer to the datasheet attached to the email. We look forward to your inquiry! Plantec Maschinen GmbH

Koşul: yeni, Üretim yılı: 2026, Aluminum Circular Saw UK 650 HA, Semi-Automatic The semi-automatic circular saw UK 650 HA is an “upcut” machine, primarily used for cutting profile materials made from cast aluminum, copper, and hard plastics (solid materials only to a limited extent). The machine is distinguished by its ease of use, quick and convenient material changeover, as well as simple mitre angle adjustment. The UK 650 HA features stepless mitre angle adjustment to the left and right up to 20° (swivel range twice 70°). Saw feed is automatic at the push of a button; material clamping is provided by two pneumatically operated vertical and two horizontal clamping cylinders. As standard, the machine comes equipped with a minimum quantity lubrication system and an air spray gun for cleaning the machine. Connections for a chip extraction system are available. Additionally, this machine can optionally be equipped with a digital mitre angle display, a scribing laser, and a pneumatic system for lifting the protective cover. Equipment - Double mitre 20°–90°–20°, large support plate - Powerful drive motor - Two-button control for initiating the cutting process (optionally available as single-button control) - Intuitive control panel - Adjustable saw blade or cutting feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material stop jaw can be moved backwards to increase cutting capacity - Large protective hood, covers the entire working area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade ø 650 mm Operating Procedure 1. Set the cutting angle 2. Insert the material 3. Adjust the stroke speed 4. Move clamping cylinders to within approx. 20 mm of the material 5. Clamp the material 6. Press the Start button to make the machine ready for operation 7. Press and hold both SAW buttons to perform the cut 8. After the cycle, release both SAW buttons and press the STOP button 9. Open the vise and remove or advance the material You are welcome to view the desired unit at any time in our production/demonstration hall. Please feel free to contact us. We look forward to your inquiry! Nsdpfxsidun De Aknjwg Plantec Maschinen GmbH

Koşul: yeni, Üretim yılı: 2026, Aluminum Circular Saw UK 352 P, manual The semi-automatic circular saw UK 352 P is an 'upcut' machine primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (suitable for solid material to a limited extent). The machine stands out due to its easy operation, rapid and convenient material changes, and simple mitre angle adjustment. The UK 352 P offers a continuously adjustable mitre range from 45° left to 0° right. The saw feed is automatic at the press of a button, and the material is clamped using two pneumatically controlled vertical clamping cylinders. As standard, the machine is equipped with a minimal lubrication system and an air spray gun for cleaning the saw. Connections for a chip extraction system are provided. Nedpfx Aksidunvsnewg Equipment - Manual saw blade guidance - Double mitre: 30° – 90° – 0°, large support table - Powerful drive motor - Clearly arranged control panel - Two vertical pneumatic clamping cylinders - Fixed material stop, which can be shifted backwards to increase cutting capacity - Large safety cover, protects the entire work area - Minimal lubrication system - Air gun for cleaning the machine - Saw blade diameter: 350 mm Operating Procedure 1) Set the cutting angle 2) Place the material 3) Move the clamping cylinder up to 20 mm from the material 4) Pneumatic clamping of the material 5) Press the start button to run the saw blade 6) The cutting process is carried out manually with the hand lever 7) Switch off the machine after the cut! You are welcome to arrange a viewing of the equipment in our manufacturing/showroom at any time. Feel free to contact us for more information. We look forward to your inquiry! Plantec Maschinen GmbH

Koşul: yeni, Üretim yılı: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine primarily used for cutting profile materials made of aluminum cast, copper, and hard plastics (solid material is possible under certain conditions). This machine stands out due to its ease of operation, quick and convenient material changes, and simple miter angle adjustment. The UK 352 HA features a steplessly adjustable miter range of up to 45° to the left and 0° to the right. Saw blade feed is automatic at the press of a button, and material clamping is achieved by two pneumatically operated vertical clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine. Connections for chip extraction systems are also provided. Features • Precision under-table circular saw • Miter adjustment: left 45º / 90º / right -45º • Including 2 pneumatic vertical clamps • Steplessly adjustable saw blade feed • Two-hand safety control Nedpfx Akjgwt Rrsnswg • Adjustable rear material stop • Chip extraction device – suitable for chip extraction unit • Mist spray system for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included! You are welcome to inspect the desired system at any time in our production/demo hall. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Koşul: yeni, Üretim yılı: 2026, Aluminum circular saw UK 352 M, manual The manual circular saw UK 352 M is an upcut machine mainly used for single cuts in aluminum and copper profiles as well as hard plastics (solid material only to a limited extent). The machine stands out for its easy handling, quick and convenient material change, and simple mitre angle adjustment. The UK 352 M offers a continuously adjustable mitre range from 45° left to 0° right. Saw feed is performed manually via a hand lever; the material is clamped manually. Equipment - Double mitre 45° – 90° – 0° - Large support plate - Powerful drive motor - Clear control panel - One manual clamping cylinder - Fixed material stop jaw can be moved backward to increase cutting capacity - Large protective hood covering the entire working area - Saw blade diameter 350 mm Operating procedure Njdpfsidunnox Aknjwg 1) Set the cutting angle 2) Insert the material 3) Manually clamp the material 4) Press the start button to run the saw blade 5) Perform the cut manually using the hand lever 6) Switch off the machine after the cut is finished! You are welcome to inspect the machine at any time in our production/demonstration hall. Feel free to contact us to arrange this. We look forward to hearing from you! Plantec Maschinen GmbH

Koşul: yeni, Üretim yılı: 2026, The semi-automatic circular saw UK-400-A is an “upcut” machine, predominantly used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid materials with limitations). The machine stands out for its simple operation, quick and convenient material changing, as well as easy miter angle adjustment. The UK-400 A features a stepless adjustable miter range of up to 20° to the left and right (swivel range two times 70°). Saw feed is performed automatically at the touch of a button, while material clamping is handled by two pneumatically operated vertical and horizontal clamping cylinders each. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are provided. Additionally, this machine can be optionally equipped with a digital miter angle display, a marking laser, and a pneumatic system for raising the protective hood. Features • Precision under-table circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º stepless Nwjdpegwt Rnjfx Akneg • Incl. 2 pneumatic vices (vertical) • Steplessly adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Extraction device – chip extraction system • Micro spray system for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 130 mm • Saw blade 400 mm • Saw blade not included! You can visit and inspect the desired system at any time in our production/showroom facility. Please feel free to contact us regarding this. We look forward to your inquiry! Plantec Maschinen GmbH

Koşul: yeni, Üretim yılı: 2026, The semi-automatic circular saw UK 352 HA is an 'upcut' machine and is primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid materials only to a limited extent). The machine is characterized by its ease of operation, quick and convenient material change, and simple mitre angle adjustment. The UK 352 HA features a continuously adjustable mitre range—up to 45° to the left and 0° to the right. Saw feed is automatic at the push of a button, and clamping of the material is achieved via two pneumatically operated vertical clamping cylinders. A minimal quantity lubrication system and an air blow gun for machine cleaning come as standard equipment! This machine is also equipped with connections for a chip extraction system. Equipment: • Precision underfloor circular saw Njdpfx Ajgwt Ryjknswg • Mitre adjustment: 45° left / 90° / -45° right • Includes 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction device - suited for dust extraction systems • Mist spray unit for air-oil cooling • Air gun with spiral hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade diameter: 350 mm • Saw blade not included! We look forward to hearing from you! Plantec Maschinen GmbH

Koşul: yeni, Üretim yılı: 2026, basınç: 6 bar, The semi-automatic circular saw UK-600-A is an upcut machine, primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (to a limited extent, solid material). The machine is characterized by its easy handling and quick, convenient material change, as well as simple mitre angle adjustment. The UK-600-A features an infinitely adjustable mitre range to the left and right up to 20° (swivel range twice 70°). The saw feed is activated automatically by pressing a button, and the material clamping is performed by two pneumatically controlled vertical and two horizontal clamping cylinders. A minimum lubrication system and an air spray gun for cleaning the machine are included as standard! Connections for a chip extraction system are available on this machine. Furthermore, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety guard. Equipment • Precision under-table circular saw • Infinitely adjustable mitre adjustment 0º/ 45º/ 90º/ -45º / -60º • incl. 2 pneumatic clamps (vertical) • Saw blade feed infinitely adjustable • Two-hand safety control • Adjustable material stop (at rear) • Extraction unit for chip extraction system • Mist spray unit for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in scope of delivery! You are welcome to view the desired system at any time in our production/demonstration hall. Please do not hesitate to contact us regarding this. Nwodpegcbwgjfx Aknog We look forward to your inquiry! Plantec Maschinen GmbH

Koşul: yeni, Üretim yılı: 2026, The semi-automatic circular saw UK 500 HA is an “upcut” machine, predominantly used for cutting profile materials made from aluminum castings, copper, and hard plastics (solid material to a limited extent). The machine is distinguished by its simple operation, quick and convenient material changeover, and easy miter angle adjustment. The UK 500 HA features a continuously adjustable miter range from 30° left to 0° right. Saw feed is automatic at the push of a button; the material is clamped by two pneumatically controlled vertical and two horizontal clamping cylinders. A minimum-quantity lubrication system and an air blow gun for machine cleaning are included as standard! Connections for a chip extraction system are available on this machine. Equipment: • Precision under-table circular saw • Infinitely adjustable miter settings at 0º/45º/90º/-45º/-60º • Includes 2 pneumatic clamps (vertical) • Saw blade feed is steplessly adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction system interface • Air-oil cooling via mist spray unit • Air gun with spiral hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel Nwedegwt R Dopfx Aknjg • Max. cutting height: 180 mm • Saw blade: 500 mm • Saw blade not included in delivery! You are welcome to inspect the machine at any time at our production/showroom facility. Please feel free to contact us to arrange an appointment. We look forward to your inquiry! Plantec Maschinen GmbH