Kullanılmış Fliegl Sds 470 T Standard satın al (79.129)

Durum: yeni, makine/araç numarası: c13a96854ea37997845c1bf36, boş ağırlık: 6.860 kg, azami yük ağırlığı: 28.140 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235/75 17,5,

Durum: yeni, makine/araç numarası: e763c8c2bb3370bd2342236a4, boş ağırlık: 3 kg, azami yük ağırlığı: 8 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball tip bearing Gearbox support leg at the front 2 wheel chocks with holders Steel underrun protection Lockable storage compartment for loading ramps underneath the platform Central axle trailer drawbar Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + Suspension Euro-axles at our discretion, with tapered roller bearings and S-cam brakes Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalisation (rocker equaliser) Wheels and Tyres 235/75 R 17.5 manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Colour-coded line routing for easy servicing Hand spindle parking brake Integral air reservoir Without ABS, but with mechanical ALB. Maximum permissible speed: 60 km/h 2 unmistakable coupling heads at the front with connecting lines to the tractor unit Electrics 12 Volt, multi-chamber lights, no side yellow LED lighting, side reflectors 2 white position lights at the front 2 white/red marker lights at the rear 1 x 7-pin 12 Volt plug at the front, with connecting cable approx. 60 cm extended Hydraulics Three-way tipper, hydraulic multi-piston press with stroke limiter and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck. Hydraulic connection with SVK connector NW 10/3, incl. connection hose Operation hydraulically via PTO from the truck Tipper Body Robust tipper body with 4 mm steel sheet floor, steel drop side body, continuous side walls, fold-down and pivot-mounted with central locking at the bottom. Removable corner posts at the rear. Rear wall fold-down and pivot-mounted with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2,420 mm 5 pairs of lashing eyes in the floor, each 5 t Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable while complying with permissible axle, support, and kingpin loads. (Poor driving and trailing performance possible due to incorrect load distribution) Country of Registration / Licence Plates Country of registration: Germany Hfedpfx Aoi Rizbefksh with Dekra approval and certificate for max. 60 km/h registration, towing vehicle agricultural or forestry tractor (country of registration Switzerland max. 40 km/h possible) Prepared for single-line license plate holder Without contour marking / reflective stripes according to ECE R 048 Paintwork Frame hot-dip galvanised incl. passivation, 15-year warranty against rust-through Side walls/body RAL 3002 Carmine Red Note! If the body is galvanised, it will not be painted! Note! Body interior only primed! Wide tyres possible at extra cost. 355 / 60 R 18, then loading height approx. 980 mm Attention: Archive images!

Durum: yeni, makine/araç numarası: 408ba9a39bbb8087056d6e563, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Lowbed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear splash guard Semi-shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle, anti-spray flaps in front of and behind 3rd and 4th axles Hedpfei Ri Dajx Afkjfh Excavator arm recess over the rear axles, running to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes rated 5 t each in the excavator arm recess at the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear incline 1 plastic toolbox, with insert shelf, w=620/h=360/d=440 mm, lockable with padlock (lock not included) 1 storage box recessed in the gooseneck in the floor with lid, W=720 mm/L=520 mm/D=170 mm Extendable width to 3,000 mm (not in the rear incline) (track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm) Timber beams 70 mm for extension to 3,000 mm Storage compartment for timber beams under loading area Lashing rings lowbed (40 lashing points) 1 pair of lashing rings on gooseneck, each 5t 9 pairs of lashing studs, integrated in the top and side of outer frame, each 10t 2 x on gooseneck in front 7 x in the lowbed area 6 pairs of lashing holes in the outer frame of the lowbed area, 5 t each (for tie-down straps) 3 additional pairs of folding lashing rings, each 10 t 1 x inside next to main frame at start of lowbed 1 x on gooseneck (protrudes) 1 x recessed in the floor behind the last axle Trailer drawbar assembly Drawbar with tested 50 mm towing eye, towing eye inclined at 8°, D-value minimum 160 kN Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation front and rear (rocker compensation) Wheels and Tires 235 / 75 R 17.5 as selected by manufacturer Steel twin wheels, factory silver Brake system 2-line air brake system Spring-loaded parking brake 2 anti-mismatch coupling heads at front, with connection lines to truck ABS and ALB, with ABS plug at front, with connection cable Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red marker lights at rear 2 x 7-pin anti-mismatch plugs at front, with connection cable 1 LED rotating beacon with holder, controlled via parking light (beacon detachable) 2 pairs of warning signs, double LED-illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/aluminium chequer plate covering followed by 70 mm softwood floor, with steel/aluminium chequer plate over wheel wells Rear incline with 70 mm softwood floor Access ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable with timber surfacing Hydraulic, powered via tractor PTO with flow restrictor, controlled laterally front left Hydraulic connection with SVK plug NW 10/3, including connecting hose Approval country / Plates Approval country: Germany 24/7 service hotline Prepared for two-line number plate holder Contour marking with reflective tape as per ECE R 048, side white and rear red Warning sign according to ECE - 70 Paintwork Frame hot-dip galvanized including passivation, 15 years corrosion perforation warranty Drawbar galvanized or black, as per manufacturer’s choice Access ramps hot-dip galvanized Note: Images are for illustrative purposes (archive images)!

Durum: yeni, makine/araç numarası: 207ad28f83705ed0d38a4f174, boş ağırlık: 3 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 14 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5, Further information Chassis Swap Central Axle Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers for 20-foot swap bodies, suitable for swap bodies 7.15 and 7.45 rear-flush (for 7.15 swap bodies, not rear-flush; forklift pockets/frame protrudes) Telescopic support leg at the front 1 pair of gearbox support feet at the front, with straight lower part and single-sided operation on the right (FR) Wheel chocks with holder Aluminium side underrun protection Steel rear underrun guard Half-shell mudguards Mounting for truck-mounted forklift at the rear, incl. 2 fork insertion pockets, 2 extendable support tubes, bracket for chain securing with locking pin. Rear underrun guard with light unit can be folded away. Includes 2 loose rubber pads to protect the rear panel; we recommend counterweight! Note: Partially low ground clearance with forklift, poor trailing behaviour possible, no guarantee! (Forklift self-weight up to max. 1,500 kg for trailers.) (With proximity switch for forklift control in conjunction with lift axle) The forklift mounting shifts the axles rearwards, pay attention to load distribution when driving without a forklift. Customer risk! (For swap body trailers, driving with forklift is only permitted in conjunction with a swap body.) Forklift mount adapted as per AU 203670 for 7.45m swap bodies Counterweight at the front between the frames, approx. 300 kg, if required, exact check still pending Drawbar equipment for central axle trailers Drawbar with approved 50 mm towing eye, forwarding edition (not suitable for trucks with tail lift, exact check still required when ordering) Undercoupler drawbar Drawbar without length adjustment Axles + Suspension SAF drum brake axles as per manufacturer's choice Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, colour-coded line routing for easier service Spring-loaded parking brake Duomatic connection at front, with connecting line to the tractor, on the left (FR) Duomatic connection at front, with connecting line to the tractor, connection on the right (FR) EBS, Electronic Braking System with EBS plug at the front, with connection cable, on the left (FR) Attention: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift & lower valve, holding function in each lift/lower position Vehicle - Drive stability system Wheels and Tyres 235/75 R17.5, brand as per manufacturer's choice Steel twin wheels, factory silver Electrics Hjdpfx Aei Ri Iasfkofh 24 Volt, 4 x 3-chamber tail lamps + 1 round reversing lamp + 1 round rear fog lamp, side yellow LED lighting, lights mounted protected! 2 white position lamps at the front 2 white/red lane marking lamps at the rear 1 x 15-pin connector at the front, with connecting cable, on the left (FR) 2 x 7-pin sockets at the rear left (FR) for truck-mounted forklift 1 x 15-pin socket at the rear left (FR) for truck-mounted forklift LED work lights on both sides behind the 2nd axle (switched via reverse light) Additional LED work light at rear, switched via reverse light Approval / Plates Germany With Dekra inspection and certificate (as per §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour markings with reflective tape as per ECE R 048, white on the sides and red at the rear Painting Frame DB

Durum: yeni, makine/araç numarası: ede0610378cbe39cc4883251d, boş ağırlık: 24.000 kg, azami yük ağırlığı: 7.550 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction 1st pair of wheel recesses integrated into the steel platform in the driving aisle area, tapered for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! The frame is 400 mm higher than the wheel recess in the main beam area. If machines are to be transported and the total height needs to be checked, we kindly request the technical datasheet of the machine types with exact specifications (if total height is exceeded -> customer risk, approval required). Depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer. Turntable with heavy-duty ball bearing slewing ring, toolbox integrated into the turntable front section Rear support foldable 2 wheel chocks with holders Side underrun protection in aluminium Rear mudflaps across the full width Extendable widening to 3,000 mm (not in rear bevel area) (The track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 3 pairs of lashing points integrated into the front floor, each 10 t Incl. 6 pairs of lashing mushrooms recessed in the upper and side external frame, each 10 t 1 x in the gooseneck area The rest distributed in between, distance not greater than 1200 mm 1 x rear bevel 5 pairs of stake pockets recessed into the external frame, inside 70 x 40 mm (convertible to 5 t ring lashing points, not included) Drawbar for turntable trailer Hfsdpfx Afei Ri Ryskeh Drawbar with certified 40 mm towing eye Axles + Suspension SAF drum brake axles Axle/undercarriage laser measured for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Brake System 2-line compressed air brake system Colour-coded piping for easy servicing Spring-actuated parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the truck ABS and ALB, with ABS socket at the front, including connection cable Attention: The trailer may only be towed by vehicles that ensure the effective operation of the ABS! Wheels and Tyres 235 / 75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red rear marker lights 2 x 7-pin non-interchangeable plugs at the front, with connection cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, incl. followed by 70 mm softwood floor, wheel arch areas with steel/checkered plate covering Rear bevel with 70 mm softwood floor Low loader platform incl. rear bevel 8,200 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring lift assistance Operating Instructions With 10,000 kg axle load an exemption permit is required, only indivisible loads possible!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and fifth wheel loads (Poor driving and trailing behaviour possible due to incorrect load distribution) Country of Approval / Plates Country of approval: Germany Incl. with Dekra approval and certificate (acco

Durum: yeni, makine/araç numarası: b50cac2c60a813b0968994fa0, boş ağırlık: 5.700 kg, azami yük ağırlığı: 18.300 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer - Steel welded construction - Turntable with robust ball-bearing slewing ring - Foldable rear support - 2 wheel chocks with holders - Full-width rear mudguards - Prepared for extension to 3,000 mm (holes in the outer frame, not in the rear bevel) Lashing Points Low-bed - 1 pair of lashing cutouts recessed at the front in the longitudinal beam at the gooseneck, each rated for 10t - 7 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated for 10t - 1x at the front on the gooseneck - 5x in the low-bed area - 1x in the rear bevel - 12 pairs of lashing holes in the outer frame, each rated for 5t (for tensioning strap hooks) - 5x gooseneck, 6x low-bed, 1x rear bevel Drawbar Hitch Turntable Trailer - Drawbar with tested 40 mm towing eye Axles & Suspension - Drum brake axles, manufacturer’s choice - Laser-aligned axles/chassis to reduce tire wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance) Wheels and Tires - 235 / 75 R 17.5 Fulda - Steel twin wheels, factory silver Brake System - 2-line compressed air brake system - Spring-loaded parking brake - 2 confusion-proof coupling heads at the front, connection lines to tractor vehicle - Connection lines approx. 60 cm extended - Without ABS, but with mechanical ALB, max. 60 km/h permissible Electrics - 12 volts, multi-chamber lights, no side yellow LED lights, side reflectors - 2 white position lights front - 2 white/red lane marker lights rear - 1x 7-pole 12-volt plug at the front, with connection cable, extended by approx. 60 cm - 1 LED beacon with bracket, switched via parking light (removable beacon) - 2 pairs of illuminated, extendable warning boards up to 3,000 mm Floor - Gooseneck front with steel / checker plate covering - Toolbox recessed into drive-over slope at gooseneck - Then 70 mm softwood floor, with steel / checker plate covering in wheel arch area - Rear bevel with 70 mm softwood floor - Low-bed platform including rear bevel: 5,900 mm Loading Ramps - Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable - Wood covered - Supported by spring assist Operating Instructions - For 10,000 kg axle load, a special permit is required; only indivisible loads permitted! - The specified total weight is technically possible; depending on the load, the permissible axle/support/saddle loads may not be achieved (poor tracking and maneuverability possible due to improper load distribution) Country of Registration/Plates - Country of registration: Germany - With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (for Switzerland, max. 40 km/h possible) - Prepared for two-line license plate holder - No ECE R 048 compliant contour marking / reflective strips Paintwork - Frame: DB 7350 Novagrau - 10-year warranty against rust-through Hfodpfx Aoi Ri Agsfkeh - Drawbar galvanized or black, manufacturer’s choice - Loading ramps hot-dip galvanized Note: Archive images!

Durum: yeni, makine/araç numarası: 15431365fe5515297a6a9fb05, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty slewing ring Foldable rear supports 2 wheel chocks with holders Aluminum side underrun protection Full-width rear mudflap Half-shell mudguards for 1st and 2nd axles with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind the 3rd and 4th axles Digger arm recess above the rear axles, extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep; 2 pairs of lashing holes (5 t each) in the digger arm recess, laterally on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear incline 1 plastic toolbox with shelf insert, W=620/H=360/D=440 mm, lockable with a padlock (padlock not included) 1 storage box recessed into neck section in the floor, with lid, W=720 mm / L=520 mm / D=170 mm Extendable widenings to 3,000 mm 70 mm wooden planks for widening to 3,000 mm Storage compartment for wooden planks under the loading area Low-bed trailer lashing points (40 lashing options) 1 pair of 5 t lashing eyes on gooseneck 9 pairs of 10 t lashing pins, recessed into the top and side of the external frame 2 x on the front gooseneck 7 x in the low-bed area 6 pairs of 5 t lashing holes in the external frame of the low-bed (for hook-in tie-down straps) 3 additional pairs of foldable lashing eyes, each 10 t 1 x inside next to the main frame at the start of the low-bed 1 x on the gooseneck (overhanging) 1 x recessed in the floor behind the last axle Trailer drawbar Towing bar with tested 50 mm towing eye, 8° inclined towing eye, D-value at least 160 kN Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization front and rear (rocker compensation) Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin wheel configuration, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to towing vehicle ABS and ALB, with ABS socket at the front, with connecting cable Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red tracking lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable 1 LED beacon with holder, operated via parking lights (removable beacon) 2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm Floor Front gooseneck section with steel/chequer plate covering Proceeding with 70 mm softwood flooring, steel/chequer plate covering in the wheel arch area Rear incline with 70 mm softwood flooring Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lift assistance Hfodji Ri A Sjpfx Afkoh Registration/country plates Country of registration: Germany 24/7-Service Hotline Prepared for two-line license plate holder Conspicuity markings with reflective strips according to ECE R 048, side white and rear red Warning panel according to ECE - 70 Paintwork Frame hot-dip galvanized incl. passivation—15-year corrosion warranty Towing bar galvanized or black, at manufacturer’s option Ramps hot-dip galvanized Note: These are archive photos!

Durum: yeni, makine/araç numarası: d461243f559015adca5bb372c, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Hfodpfji Ri Dlox Afkoh Chassis for Low-Loader Trailer Steel welded construction Turntable bogie with heavy-duty slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear spray flap Half-shell fenders on 1st axle with anti-spray flaps Additional anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox, with tray, width = 620 mm, height = 360 mm, depth = 440 mm, lockable with padlock Extendable width up to 3,000 mm Central storage compartment for wooden planks in the loading area 70 mm wooden planks for extension to 3,000 mm Lashing rings for low-loader (40 securing points) 1 pair of lashing cutouts indented in the front longitudinal beam (cranked zone), each rated for 10 t 4 pairs of lashing holes in the outer frame, each rated for 5 t (for tensioning straps) 7 pairs of lashing pins recessed in the top and side of the outer frame, each rated for 10 t 1 x at the front on the cranked zone 6 x in the low-bed First lashing ring 250 mm from front and last one max. 250 mm from rear; spacing between lashing rings not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm, convertible to 5 t ring lashing eyes 2 additional pairs of folding lashing rings, each rated for 10 t 1 x on the cranked zone (protruding) 1 x recessed in the floor behind the last axle Drawbar / Turntable coupling Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker balance) Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 anti-swap coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front, including connecting cable Make: Wabco, Knorr or Haldex Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin anti-swap plugs at the front, with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning panels, LED illuminated and extendable to 3,000 mm Floor Front cranked section with steel / tread plate surface Storage box recessed in the ramp transition to cranked section Followed by 70 mm softwood floor, in wheel arch area with steel / tread plate surface Rear bevel with 70 mm softwood floor Low-loader area incl. rear bevel: 6,500 mm Loading Ramps Steel ramps, 2,800 mm length, 750 mm width, laterally adjustable Wooden inlay Hydraulically operated via tractor auxiliary drive with restrictor, operation on left side, FR Hydraulic connection with SVK coupling NW 10/3, including connecting hose Registration / Plates Country of registration: Germany 24/7 Service Hotline Prepared for two-line plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Warning panel according to ECE - 70 Paintwork Frame hot-dip galvanized including passivation 15-year warranty against rust-through Drawbar galvanized or black, manufacturer’s choice Ramps hot-dip galvanized Note! These are archive images!

Durum: yeni, makine/araç numarası: 628cde0fe99cc2d3c8eaa8dd8, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Lowbed trailer chassis Steel welded construction Turntable with robust ball bearing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width rear splash guards Half-shell fenders on axle 1 with anti-spray mudflaps, anti-spray mudflaps behind axles 2 and 3 1 plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with a padlock (padlock not included) Extendable widenings up to 3,000 mm Storage compartment for timber planks in the center of the loading area 70 mm timber planks for extension to 3,000 mm Lashing eyes for low loader (40 lashing points) 1 pair of lashing cutouts in the front longitudinal beam, recessed in the cranked area, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching lashing straps) 7 pairs of recessed lashing mushrooms on top and side of outer frame, each 10 t 1 front cranked area 6 in the lowbed deck First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 2 pairs of additional folding lashing eyes, each 10 t 1 located in the cranked area (protruding) 1 recessed in the floor behind the last axle Towing equipment for turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles (manufacturer’s choice) Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and tires 235 / 75 R 17.5 (manufacturer’s choice) Steel rims, dual configuration, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads front, with connecting lines to the tractor unit, ABS and ALB, with ABS plug front, with connection cable Brand: Wabco or Knorr Electric system 24 volt, multi-chamber lights, yellow LED side marker lights 2 white front position lights 2 white/red lane marker lights rear 2 x 7-pin non-interchangeable plugs at front, with connecting cable 1 LED rotating beacon light with bracket, switched via parking light (removable lamp) 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm Floor Front crank area with steel / chequer plate covering Toolbox recessed in the ramp bevel to the crank Then 70 mm softwood floor, steel / chequer plate covering in wheel arch area Rear ramp bevel with 70 mm softwood floor Lowbed loading area incl. rear ramp bevel: 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-covered With spring assist Country of approval / Number plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning board according to ECE-70 Painting Frame hot-dip galvanized incl. passivation 15-year warranty against corrosion Drawbar galvanized or black, as per manufacturer’s choice Loading ramps hot-dip galvanized Attention! These are archive images! Hfsdpfx Aei Ri Ddsfksh

Durum: yeni, makine/araç numarası: 074630ca1b8dc2d710f82c15a, boş ağırlık: 3.980 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis Semi-Trailer Tipper Fine-grained steel welded construction in lightweight design, kingpin plate with interchangeable 2-inch kingpin Patented curved front wall Without landing leg Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard brackets with stone-repellent surface Tow hook at the rear Axles & Suspension SAF disc brake axles Axles/chassis laser aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, activation with triple brake application (starting aid is functional up to 30% axle overload and up to a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism with 10 years’ warranty against corrosion Brake System 2-line compressed air braking system, color-coded line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With lift and lowering valve Vehicle driving stability system Wheels and Tyres 385/65 R22.5, make at manufacturer’s discretion Hfsdpfxji Ri H Ss Afkeh Polished aluminum rim, make at manufacturer’s discretion Electrics 24 volt, multi-chamber lights, LED side marker lights (amber) 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupler, fixed part, NW 48 mm (without hose connection) Operated hydraulically via PTO on truck Body Aluminum box-body, made of high-quality, wear-resistant material; front wall 5 mm thick, with external end walls made of 30 mm hollow chamber profiles, precisely welded, with top rail profile deflecting loose material. Inside: ladder/access at front wall (not for use with Cramaro). External holder for shovel and broom at the front wall. Greenline – conical and aerodynamic body design Membrane-type rear wall Rear wall as pendulum flap with double joint hinge, mounted externally with double hook locking Rear wall with rubber seal (Note: Heat resistant up to 170°C max!) Continuous floor 5 mm thick, Brinell hardness 110 Note: Only suitable for the transport of sand, gravel, and round gravel with max. grain size 20 mm! All other transported goods are excluded from warranty! Standing platform with access, connection plate for air/electric and brake with large clearance for optimal operation Sliding tarp, single-sided folding to FR-right, with central locking in FR-left Operating Instructions For transportation of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material corrosion and rusting. The stated total weight is technically possible; depending on the load, the total weight may not be achievable due to permitted axle, support, and fifth wheel loads. (Poor driving and tracking behavior possible with incorrect load distribution.) Revolution Link: Revolution Link User Review: Registration Country / Plates Germany With DEKRA inspection and certificate (acc. to §13 EC-FGV) 24/7 Service hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau Body: R

Durum: yeni, makine/araç numarası: 45d76d32267904923b7adcdea, boş ağırlık: 4.980 kg, azami yük ağırlığı: 30.020 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis and Semi-Trailer Tipper Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin Patented curved front bulkhead 24 t, 2-speed landing gear, operated from one side, with straight lower part, without thrust compensation Wheel chocks with holder Collapsible underrun protection Half-shell mudguards Integrated mudguard brackets with stone-repellent surface Tow hook at the rear Axles and Suspension SAF disc brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, activated after 3x braking (starting aid functions up to a 30% overload on the axle and up to a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty Brake System 2-line compressed air brake system; color-coded line layout for easier maintenance Spring-loaded parking brake 2 interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at front (no connecting cable) Note: The trailer may only be towed by towing vehicles that ensure proper ABS functionality! With raise/lower valve Vehicle stability system Wheels and Tires 385/65 R22.5—manufacturer at the manufacturer's discretion Polished aluminum wheel rims—manufacturer at the manufacturer's discretion Electrics Hfodei Ri Idspfx Afkeh 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin sockets at the front, no connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body High-quality, abrasion-resistant aluminum box body, front wall 5 mm thick, external hollow-chamber side walls, 30 mm profile, precisely welded, with spill-repellent upper rail profile. Internal access ladder at the front wall (not in combination with Cramaro). Shovel and broom holder outside on the front wall Greenline – conical and aerodynamic body shape Membrane rear wall Rear wall as swinging gate with double-joint hinge, external with double hook lock Rear wall with rubber seal Note! Heat resistant up to max. 170°C! Floor fully 5 mm thick, Brinell hardness 110 Note! Only suitable for transport of sand, grit, and gravel with max. grain size up to 20 mm! Any other loads are excluded from warranty! Standing platform with ladder, connection plate for air/electrics and brake with large clearance for optimum operability Roll tarp can be parked on RH side with central locking on LH side Operating instructions For transports of salt, lime, etc., we recommend a tipper cylinder with hard-chrome plated piston rod to prevent corrosion due to material contact. The specified gross weight is technically feasible; depending on the cargo, the gross weight may not be achievable due to permissible axle/support/fifth wheel loads (poor stability or tracking behavior possible due to incorrect load distribution) Revolution Link: Revolution Link Review: Country of Registration / License Plates Germany With Dekra inspection and report (according to §13 EC-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape according to ECE R0

Durum: yeni, makine/araç numarası: 55d3c5c03e032385649769b1b, boş ağırlık: 9.900 kg, azami yük ağırlığı: 14.100 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty slewing ring, integrated storage box included. Turntable drawbar Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Extendable widening to 3,000 mm (not at rear chamfer) Hsdpfx Aji Ri I Eefksfh (Note: The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central wooden plank storage compartment 70 mm wooden planks for widening to 3,000 mm Low loader lashing rings 3 pairs of lashing points rated 10 tonnes each, integrated at the front 6 pairs of lashing mushrooms, recessed in the upper and side outer frame, each rated at 10 tonnes 1 x in the neck area The remaining pairs are spaced at intervals no greater than 1,200 mm 1 x at the rear chamfer 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Turntable trailer drawbar system Drawbar with certified 40 mm towing eye Note! With 40 mm towing eye, the permissible total weight of the truck must not exceed 18,000 kg; otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Laser-measured axles/chassis for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation at front and rear (rocker compensation) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin configuration, factory silver Braking System 2-line pneumatic brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at front and connection cable Note: The trailer may only be towed by vehicles capable of ensuring effective ABS operation! Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable connectors at front, with connecting cable 1 LED beacon with bracket, operated via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Steel floor at front Followed by 70 mm softwood floor, steel/chequer plate in wheel arch area Rear chamfer with 70 mm softwood floor Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-decked With spring-assisted support Operating Instructions An exemption permit is required for a 10,000 kg axle load, only indivisible loads permitted! The stated total weight is technically feasible; depending on the load, the total weight may not be achieved while adhering to the permitted axle, support, and kingpin loads. (Poor handling and tracking may result from incorrect load distribution) Registration/Country Signs Country of registration: Germany 1 with Dekra inspection and report (according to §13 EC - FGV) 24/7 Service Hotline Prepared for two-line licence plate holder Contour markings with reflective strips to ECE R 048, white on sides and red at rear Paintwork Frame RAL 3002 Carmine Red 10-year anti-perforation warranty Drawbar, galvanised or black, as per manufacturer specification Access ramps hot-dip galvanised Note: Archive photos!

Durum: yeni, makine/araç numarası: 6d88bda3a1ee2464a81b34f36, boş ağırlık: 4 kg, azami yük ağırlığı: 13 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction, with slight central pre-camber, turntable with heavy-duty slewing ring, wheel chocks with holder, quarter-circle mudguards in front of and behind each axle. Lashing Eyes for Low-Bed Over front axle: 2 pairs of ring lashing eyes at 5t each, front at the gooseneck Low-bed: 4 pairs of lashing eyes, side-mounted in the low-bed at 6t each 5 pairs of lashing eyes at 5t between the longitudinal beams Drawbar / Turntable Trailer Coupling Drawbar with certified 40 mm towing eye, mechanically length-adjustable and lockable in 6 x 100 mm steps Hfodpfxji Ri N Ao Afkjh (Drawbar length 1,700 - 2,300 mm) Axles & Suspension BPW drum brake axles with 10t axle load each, automatic slack adjusters. Axle endurance braking test rated up to 105 km/h, rear axle manually removable. To remove: release air locking and lower the rear to the ground. Then disconnect the hoses at the rear module, insert the transport bar into one of the rear bushings, and, by gently pressing down and simultaneously pulling back, uncouple the rear (parking brake released). After loading or unloading, move the rear module into place and connect up to the marking. Then raise to driving height and reconnect hoses. Confirm bolt locking (visual check to ensure bolt locks) and test rear functionality. Air suspension with raise/lower valve Wheels and Tyres 235 / 75 R 17.5, from leading brands, steel rims in twin arrangement, factory silver finish Braking System 2-line air brake system, spring-loaded parking brake, 2 fail-safe coupling heads front, with connecting lines to tractor unit, EBS (Electronic Braking System) with EBS plug front, incl. connection cable. Attention: This trailer may only be towed by tractor vehicles capable of guaranteeing effective ABS operation! Electrics 24-volt system, multi-chamber lights, yellow side LED lighting, 2 white position lights front, 2 white/red lane marker lamps rear, rotating beacon with holder, operated via parking light circuit (beacon removable), 2 pairs of warning plates, double LED illuminated, extendable up to 3,300 mm, removable with plug, 2 x 7-pin fail-safe plugs front with connection cable, 1 x 7-pin agricultural plug, voltage transformer 12/24 volts (for electrical system only, not ABS/EBS) Floor Steel/chequer plate floor on gooseneck, between longitudinal and cross members with perforated plate covering. Axle covers not drivable, extension to 3,000 or 3,300 mm possible. Operating Notes Note! For 10,000 kg axle load, special approval is required. Approval must be requested separately in each German federal state; a commitment for 20t gross weight is not guaranteed by law. Customer risk. Special approval required if overall towing length exceeds 18,750 mm. Observe country-specific registration regulations. The specified gross vehicle weight is technically feasible; depending on the load, gross weight may not be achievable while adhering to permissible axle, support, and fifth-wheel loads. Observe BO-circle regulations!!! Registration / Plates Registration country: Germany, with Dekra inspection and report (according to §13 EC - FGV), prepared for single-line number plate holder, warning plate according to ECE-70, contour marking with reflective tape according to ECE R 048 Paintwork Front frame hot-dip galvanized with passivation, rear frame RAL9006 silver, drawbar KTL black Note: Archive images!

Durum: yeni, makine/araç numarası: 59ade5d1599dcdee29033ac46, boş ağırlık: 6.350 kg, azami yük ağırlığı: 28.650 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 435/50 r19,5, Further information Chassis Fifth Wheel Forwarder Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Insert bar for aluminum ramps across the entire width Frame in reinforced version for vehicle loading (up to the outer frame) Outer frame with load-lock profile approx. every 400 mm for lashing strap attachment Hsdjld Ihlspfx Afkefh 10 pairs of lashing pins flush-mounted on top/outside of the outer frame, each rated at 10 t 24 t, 2-speed landing gear, single-sided operation, with semicircular lower part and straight mounting plate, with thrust compensation Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Galvanized steel rear underrun protection Quarter-circle mudguards in front of 1st axle and behind each axle With anti-spray mudflaps behind each axle Pair of ferry lashing points, marked in yellow 1 spare wheel holder for 1 single wheel, with wheel fixing kit 2 plastic toolboxes, with drawer and storage shelf, w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included) Container locks: 4 pairs of locks recessed in the floor for 2 x 20 ft or 1 x 40 ft container, frontmost position as fold-down lock, countersunk 10 pairs of stake pockets recessed in the outer frame, 70 x 40 mm internal dimensions 10 stake pockets centrally recessed in the floor, 70 x 40 mm internal dimensions 2 cross lashing/stake rails inset into floor across the full width up to the outer frame (max. usable internal width between the outer most removable stakes approx. 2170 mm), approx. 100 mm high. With 20 mm round steel rails, both top and bottom, distance between upper and lower approx. 60 mm (of the round steel). Lower part finished with angle sheet, half open downwards. For lashing and inserting stakes 80 x 80; arrangement: positions 2 and 4 according to Fliegl data sheet 20 removable stakes, hot-dip galvanized Note: Stake pockets/inset stakes are not designed for sole load securing of long material, pipes etc. without lashing Storage space for aluminum drive-on ramps, ramps can be inserted from the rear 3 pairs of fold-down lashing eyes 10 t in the outer frame (1x in front of front wall and 2x in the rear area) Axles & Suspension SAF disc brake axles Axles/chassis laser-measured — reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and traction aid, operated by 3x brakes (traction aid operates up to 30% axle overload and a max speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tire damage 2 ride heights, adjustable via manual control, 1 x for coupling height 980 mm, 1 x for coupling height 1100 mm (Note! Vehicle with inclined position) Braking system 2-line compressed air braking system Colored line routing for easy service Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve 2 ride heights, adjustable via manual control, 1 x for coupling height 980 mm, 1 x for coupling height 1100 mm (Note! Observe total height, overheight at customer’s risk) Ride height in conjunction with lift axle, with lifted axle the loading or total height increases by 50 mm (for Mega Flex only at low ride height/coupling height) Vehicle - driving stability system Wheels and tires 435/50 R19.5, make at man

Durum: yeni, makine/araç numarası: f8fb99947a1c19bc4d63549ff, boş ağırlık: 6 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 24 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing race Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flaps Half-shell fenders on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles 1 plastic tool box, with shelf, w=620/h=360/d=440 mm, lockable with padlock (padlock not included) Extendable widening to 3,000 mm (not at the rear chamfer) (the track width of machines or vehicles to be transported must not exceed 2,550 mm outer frame width) Central storage compartment for wooden beams on the loading area 70 mm wooden beams for widening to 3,000 mm Lashing points on low loader 1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated 5t Hfsdpfxji Riwfe Afkjh 7 pairs of mushroom lashing points, recessed at top and side in outer frame, each rated 10t 1x at the front on the gooseneck 6x in the drop deck First lashing point 250 mm from front, last max. 250 mm from rear, distance between lashing eyes not greater than 1,100 mm 5 pairs of stake pockets recessed in side frame, internal dimension 70 x 40 mm (convertible for 5t ring lashing eyes, not included) 2 pairs of additional fold-down lashing eyes, each rated 10t 1x on the gooseneck (projecting) 1x recessed in the floor behind the last axle Trailer turntable drawgear Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (equalising rocker) Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice with M&S marking Steel wheels in twin arrangement, factory silver Brake System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connection lines to the towing vehicle ABS and ALB, with ABS connector at front, with connection cable Brand: Wabco or Knorr Note: This trailer may only be towed by vehicles which ensure the proper functioning of the ABS! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red rear outline marker lights 2 x 7-pin non-interchangeable plugs at front, with connection cable 1 LED rotating beacon with holder, switched via parking lights (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000mm Floor Gooseneck at front with steel/chequer plate covering Storage box recessed on the transition slope to gooseneck After that, 70 mm softwood floor, steel/chequer plate covering in wheel arch area Rear slope with 70 mm softwood floor Low-bed platform including rear slope 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety support, foldable underneath (prevents lateral slipping of the ramps, not in conjunction with hydraulic side ramp shift) Wooden inlay on ramps Spring lifting assistance Operating instructions At 10,000 kg axle load, an exemption permit is required, only indivisible loads possible!!! The stated total weight is technically possible; depending on the load, the gross weight may not be achievable while adhering to permissible axle, support, and kingpin loads. (Poor driving and trailing behaviour may result from incorrect load distribution) Country of registration/Plates Country of registration: Germany Approval according t

Durum: yeni, makine/araç numarası: 824d4741dc933a94e9a7a7a8c, boş ağırlık: 5.600 kg, azami yük ağırlığı: 29.400 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis Semi-Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable double kingpin. Patented curved front wall. Central telescopic support leg; uncoupling is not possible when loaded, and when uncoupled, the trailer must stand sloped to the rear. Wheel chocks with holders. Foldable underrun protection. Half-shell mudguards. Integrated mudguard holders with stone-repellent surface. Asphalt-specification splash guards behind the last axle, hinged to the mudguard, with hanging option on top of mudguard; mudguard shortened. Tow hook at the rear. Axles & Suspension SAF drum brake axles. Laser-measured axles/chassis to reduce tire wear and fuel consumption. Axles in off-road specification. Air suspension. 1st axle is automatic lift axle, including forced lowering and start-off aid, operated by actuating brakes 3x (start-off aid functional up to 30% axle overload and up to a max speed of 25 km/h). Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty. Brake System 2-line compressed air brake system with color-coded lines for easy servicing. Spring-loaded parking brake. 2 foolproof coupling heads at the front, without connecting line. EBS electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by tractors capable of ensuring effective ABS operation! With raise & lower valve. Vehicle stability control system. Wheels and Tires 385/65 R22.5, brand according to manufacturer’s choice. Steel rims, factory silver. Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting. 2 white front position lights. 2 white/red lane indicator lights at the rear. 2 x 7-pin foolproof sockets at the front, without connecting cable. Hydraulics High-pressure cylinder (max. 250 bar) with HDK screw coupling, fixed part, NW 48 mm (without hose connection). Operated hydraulically via truck PTO. Body Steel round body in Stone Master design made of high wear-resistant HB 400/450 steel. Slanted front wall with external hydraulic unit and access step at the front wall. Membrane-type tailgate. Tailgate as pendulum flap, exterior-mounted with dual hook locking. Two clamp screws with toggle fasteners at lower side sections. Side walls continuous 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized construction. Body insulated version, Fliegl Asphalt Profi Thermo, insulated at front, sides, bottom, and rear with Fliegl Isotherm. BASIC tarpaulin cover. Hedoi Rix Sspfx Afkjfh Standing platform with access, connector plate for air/electrics and brake with ample clearance for optimal operability. Roll-over tarp for stowing on right-hand side, with central locking on the left-hand side. Operating Instructions For transportation of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod to prevent material attack and corrosion. The stated gross weight is technically possible. Depending on cargo, the gross weight may not be achievable within the permissible axle, support, and saddle loads. (Poor driving and trailing stability possible due to poor load distribution) Country of Registration/Plates Germany With DEKRA inspection and expert report (according to §13 EG-FGV) Body strength compliant with EN 12642 24/7 service hotline Manufacturer's certificate for thermo vehicles according to RS 10 - 2013 Prepared for single-line license plate holder Contour marking

Durum: yeni, makine/araç numarası: 81b04fd2e28f354df79a4c3b3, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5``, Further information Chassis Swap Central Axle Trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear Locking folding adapter + height adjustment for parking height 1,000 - 1,120 mm, folding centre supports and re-mountable guide rollers upwards, Hfedpfxoi Riy Nj Afkjh 4 container locks with sturdy outriggers on 20-foot base for swap bodies 7.15 / 7.45 and 7.82 1 pair of gearbox support feet at the front, with straight lower section and single-side operation on FR right 2 wheel chocks with holders Side underrun protection aluminium Rear underrun protection steel Half-shell mudguards Drawbar arrangement for central axle trailer Drawbar with certified 50 mm towing eye, freight forwarding version (not suitable for trucks with tail lift, or subject to further inspection in case of order) Undermount drawbar, free drawbar length approx. 2200 mm Axles & Suspension SAF drum brake axles Axle/chassis laser alignment, reduces tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system with colour-coded piping for easy servicing. Spring-loaded parking brake 2 misconnection-proof coupling heads at the front, with connection lines to the truck, connector at FR-right EBS, Electronic Brake System with EBS plug at front, with connection cable, connector at FR-right Note: The trailer must only be towed by vehicles which ensure ABS functionality! With raise/lower valve, with holding function in both lower and raise position Vehicle – Driving Stability System Wheels and tyres 235/75 R17.5'' tyres, manufacturer at discretion Steel twin wheels, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red outline marker lights at the rear 1 x 15-pin plug at the front, with connection cable, connector at FR-right 2 additional LED work lights at rear, switched via reversing light 1 LED work light front centre between the carriers, rear-facing, switched via reversing light Operating notes The stated total weight is technically feasible, depending on the load, the total weight may not be achievable within the permissible axle, support and kingpin loads. (Incorrect load distribution can result in poor driving and tracking behaviour) Registration country / Plates Germany With Dekra approval and inspection report (in accordance with §13 EC - FGV) 24/7 Service hotline Prepared for single-line license plate holder Warning plate in accordance with ECE - 70 Contour marking with reflective strips to ECE R 048, white on sides and red at rear Paint Frame in DB 7350 Novagrau, 10-year warranty against rust penetration Note: Archive images!

Durum: yeni, makine/araç numarası: e7fbe178b85a202cade7e95af, boş ağırlık: 5 kg, azami yük ağırlığı: 22 kg, toplam ağırlık: 29 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis: Semitrailer for Forwarding Operators Fine-grain structural steel welded construction, fifth wheel plate with replaceable 2" kingpin, with two kingpin positions. Outer frame slightly inclined with Load-Lock profile for lashing strap hooks. Note! To hook lashing straps in combination with side walls, the side walls must be opened! 2 pairs of lashing eyes recessed in the gooseneck outer frame, each rated at 5 tonnes. 8 pairs of lashing eyes recessed in the outer frame at the lowbed area, each rated at 5 tonnes. 24-ton 2-speed landing gear, single-sided operation, with straight base, without compensating mechanism. 2 wheel chocks with holder. Aluminum side underrun protection. Steel rear underrun protection. Quarter-shell mudguards in front of and behind axle assembly. 2 stainless steel toolboxes, width=600/height=400/depth=500 mm, with polished, lockable door. 2 pairs of stake pockets recessed in the gooseneck outer frame, inner dimension 70 x 40 mm. 6 pairs of stake pockets recessed in the outer frame at the lowbed area, inner dimension 70 x 40 mm. Internal width between stakes: 2420 mm! 3 lashing/stake rails in the lowbed, transversely embedded in the floor, over the entire width to the outer frame (usable internal width between outer removable stakes approx. 2170 mm), approx. 100 mm high; with 20 mm round steel bars, top and bottom, spacing between bars approx. 60 mm. Bottom finished with angle sheet, half open downward. Suitable for lashing and inserting stakes 80 x 80 mm. Removable stakes, width=80/depth=50/length=1200 mm, hot-dip galvanized. Removable stakes, width=80/depth=80/length=1200 mm, hot-dip galvanized. Note: Stake pockets/removable stakes are not intended for the sole securing of long materials, pipes, etc. without additional lashing. Mechanical rear extension with hand crank, extendable by approx. 1,500 mm, lockable every 500 mm. Comes with support beam, load capacity over the entire width: 2,000 kg at 500 mm, 1,000 kg at 1,000 mm, and 500 kg at 1,500 mm. Includes retractable rear underrun protection with lighting. 2 pairs of removable stakes, width=80/depth=80/length=1200 mm, hot-dip galvanized. Hedpoi Ri Hvefx Afkjfh Open storage compartment for removable stakes, at the front wall or under the loading area (for 10 removable stakes 80 x 50 x 1200 mm and 4 removable stakes 80 x 80 x 1200 mm). Axles + Suspension SAF drum brake axles. Axle/chassis laser alignment - reduces tire wear and fuel consumption. Last axle is self-steering with automatic reverse lock via reverse light, and additional lock function on the vehicle via hand knob. Air suspension with raise & lower valve. Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice. Steel twin wheels, factory silver. Braking System 2-line compressed air brake system. Spring-loaded parking brake. 2 foolproof coupling heads at the front, without connecting line. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS CAN bus signal for display in the truck cab. The truck must be correspondingly equipped; no truck installation or calibrated weighing system included. Electrics 24 Volt, multi-chamber tail lights, yellow LED side marker lights. 2 white position lights at the front. 2 white/red track marker lights at the rear. 2 x 7-pin sockets at the front, without connecting cable. 2 additional LED work lights at the rea

Durum: yeni, makine/araç numarası: f79a9f15e7131d57a512793ab, boş ağırlık: 8.900 kg, azami yük ağırlığı: 15.100 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports 2 wheel chocks with holders Side underrun protection in aluminium Rear spray flaps over the entire width Quarter shell mudguard in front of the 1st axle Extendable side extensions to 3,000 mm (not in rear chamfer area) (The track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for timber planks in the middle of the loading platform 70 mm timber planks for extension to 3,000 mm Lashing eyes low-loader 1 pair of lashing eyes on the gooseneck, each with 5 t capacity Hfedpfoi Ri Izjx Afkeh 9 pairs of lashing mushrooms recessed in top and side of outer frame, each with 10 t capacity 2 x on the gooseneck front 7 x in the low bed 6 pairs of lashing holes in the outer frame of the low bed, each with 5 t capacity (for attaching tie-down straps) Coupling Device for Turntable Trailer Drawbar with certified 50 mm towing eye Axles/Suspension SAF drum brake axles Laser-aligned axles/chassis - reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical inclusion Axle load compensation front and rear (rocker balance) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel twin wheels, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lamps, yellow LED side lights 2 white position lights at the front 2 white/red lane marker lights at the rear 1 LED beacon with bracket, switched via parking lights (removable lamp) 2 pairs of double warning boards, LED illuminated, extendable to 3,000 mm 2 x 7-pin fail-safe plugs at the front, with connection cable Floor Gooseneck front with steel/checker plate then with 70 mm softwood floor, in the wheel arch area with steel/checker plate Rear ramp with 70 mm softwood floor Loading Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable timber-covered Hydraulically operated via tractor power take-off with throttle, control on the left side at the front Hydraulic connection with SVK plug NW 10/3, incl. hose Operating Instructions For an axle load of 10,000 kg, a special permit is required, only indivisible loads allowed!!! The specified total weight is technically possible, but depending on the cargo, the total weight may not be achieved within the permissible axle/support/saddle loads. (Poor driving and trailing behaviour possible due to incorrect load distribution) Registration Country / Plates Registration country: Germany with Dekra acceptance and report (according to §13 EC - FGV) 24/7 service hotline included prepared for double-line license plate holder Contour marking with reflective tape pursuant to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau 10 year warranty against rust-through Drawbar galvanised or black, at manufacturer's discretion Loading ramps hot-dip galvanised

Durum: ikinci el, ilk tescil: 09/2016, renk: diğer, Üretim yılı: 2016, Donanım: ABS, = Diğer seçenekler ve donanımlar = - BPW dingilleri - Kaldırılabilir dingil Hedpfx Afoy Avafsksfh - Davlumbaz frenler = Notlar = Fliegl, 2016, BPW dingilleri, Birinci dingil kaldırılabilir, davlumbaz frenler = Firma bilgileri = Banka bilgileri: Rabobank Hesap No: 39.33.10.655 IBAN: NL73RABO0393310655 SWIFT kodu: RABONL2U - İşlemden önce banka bilgilerimizi mutlaka kontrol edin! - Araç rezervasyonu depozito olmadan mümkün değildir. - Tüm ilan edilen araçlarda yazım ve metin hataları yapma hakkımız saklıdır.

Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2007, yükleme alanı uzunluğu: 7.280 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 2.900 mm, süspansiyon: hava, dingil mesafesi: 1.810 mm, renk: diğer, Üretim yılı: 2007, = Additional Options and Accessories = - Rear doors = Notes = Tail lift: Dhollandia DHSM, underrun protection flap, 00 kg WFDFLT218700571 7.28 x 2.49 x 2.90 = Further Information = Axle brand: BPW Hsdeymqd Sjpfx Afksfh Suspension: air suspension Axle 1: Tyre tread left: 55%; Tyre tread right: 55% Axle 2: Tyre tread left: 55%; Tyre tread right: 55% Body builder: TRS Iceland Technical condition: very good Visual condition: very good Registration number: WX-TZ-33 = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a reply within 8 hours. Prices are excluding VAT. No rights can be derived from the given information. Office Phone: MOB: Dutch - English - German - French - Spanish - Italian (available on WhatsApp and Viber). MOB: Dutch (available on WhatsApp and Viber). When making payment via bank transfer, funds need to be transferred to our bank account below. Always check the payment details stated on our website. If you have received different information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Durum: yeni, makine/araç numarası: 7383bc2b7f580f0cb319b52f7, boş ağırlık: 5.400 kg, azami yük ağırlığı: 33.600 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.960 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22.5, Further Information Chassis Semi-Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin Patented curved front bulkhead Central telescopic landing leg, uncoupling when loaded not possible; when uncoupled, the vehicle must be positioned with a rearward incline. Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard bracket with stone-repellent surface Splash guards behind the last axle in asphalt specification, hinged to mudguard, with hook-in option at the top of the mudguard, shortened mudguard Towing hook at rear Axles & Suspension SAF disc brake axles, 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Axles in off-road version Air suspension First axle: automatic lift axle, including forced lowering and traction aid Hfodpfxji Rix Is Afksh Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty Braking System 2-line compressed air braking system. Color-coded hoses for easy maintenance. Spring-loaded parking brake 2 mistake-proof coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, no connection cable Attention: The trailer may only be towed by towing vehicles that ensure ABS function! With raise & lower valve Vehicle stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the tractor unit's display, via EBS, not installed on the truck (the truck must be equipped accordingly; only for standard tire set). Electrics 24 Volt, multi-chamber lamps, yellow side LED lighting Yellow side LED lighting linked to turn indicator, "flashing side marker lights" 2 white position lamps at the front 2 white/red lane marker lamps at the rear 2 x 7-pin mistake-proof sockets at the front, without connection cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw coupler, fixed part, NW 48 mm (without hose connection) Hydraulic operation via PTO of the truck Body Steel round body in Stone Master design made from highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic system and access on the front wall. Membrane rear wall Rear wall as pendulum flap, externally mounted with double hook locking. 2 clamping screws with handwheels at the lower sides. Continuous 4 mm thick side walls, floor 4/5 mm thick, wear- and weight-optimized construction. Body in insulated version, Fliegl Asphalt Profi Thermo; front, side, bottom, and rear insulated with Fliegl Isotherm. BASIC tarpaulin cover, tarpaulin cladding Standing platform with access, connection plate for air/electricity and brakes with large clearance for optimal operability. Roll-up tarpaulin stored on right-hand side, central locking on left-hand side Country of Registration / License Plates Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles according to RS 10 - 2013 Prepared for single-line license plate holder Warning sign to ECE - 70 Paintwork Frame: DB 7350 Nova Grey "10-year anti-corrosion warranty" Landing legs: galvanized Body/Side tarpaulin: RAL as desired, single color Roll-up tarpaulin: RAL 7035 light grey Thermal insulation also available in BASICplus (sheet metal cladding) and Premium (stainless steel cladding)!

Durum: yeni, makine/araç numarası: 2f960ff7c44de83fd060ec5df, boş ağırlık: 6.750 kg, azami yük ağırlığı: 32.250 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.150 mm, yükleme alanı hacmi: 50 m³, toplam uzunluk: 10.300 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.670 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, Further information Chassis Semi-Tipper Fine-grain steel welded construction, in basic lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Patented curved front panel 24-ton, 2-speed landing gear, single-side operation, with straight lower part, without load compensation Hjdoi Rizfjpfx Afkefh Wheel chocks with holder Folding underrun protection Half-shell mudguards Integrated mudguard brackets, stone-resistant surface Tarp rod with holder Tow hook at the rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axles/chassis laser-measured: reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air brake system, color-coded line routing for easier service Spring-actuated parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle - driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the towing vehicle's display, via EBS, without truck installation (prerequisite must be met in the truck; only for standard tires). Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights Yellow LED side marker lights linked to indicator "flashing side marker lights" 2 x 7-pin, non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Body Steel box body made of highly wear-resistant HB 400 steel, sloped front wall with external hydraulic cylinder mount. Shovel and broom holder outside on front wall. Inside with ladder on front wall. Side walls continuously 3 mm thick, floor continuously 3 mm thick Membrane tailgate Internal width at bottom approx. 1,440 mm Aluminum tailgate, pendulum-mounted with "double-joint hinge" and with two-leaf door split 1/2 to 1/2, top with swing arm, with one grain chute per door Standing platform with access, connector plate for air/electrics and brakes with large clearance for optimum operability Roll tarp, to be stowed on FR-right, with central locking on FR-left Country of registration / plates Germany Type approval according to EC 2007/46 Superstructure stability according to EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE-70 Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau "10-year warranty against rust-through" Body: RAL on request, single color Roll tarp: RAL 7035 light grey

Durum: yeni, makine/araç numarası: aaa375d3c15c697ac80fb51f9, boş ağırlık: 7.900 kg, azami yük ağırlığı: 31.100 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı genişliği: 2.330 mm, yükleme alanı yüksekliği: 1.950 mm, yükleme alanı hacmi: 50 m³, toplam uzunluk: 11.200 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.470 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, Further information Chassis semi-trailer tipper Fine-grain steel welded construction, lightweight design, with slight camber, fifth wheel plate with replaceable 2" king pin 24 t, 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation Wheel chocks with holder Foldable underrun protection Half-shell fenders Integrated fender bracket, surface designed to repel stones Tarp bar with holder Tow hook at rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle including forced lowering and traction aid Hot-dip galvanized lift axle mechanism, 10-year guarantee against corrosion Brake System 2-line compressed air braking system, color-coded piping for easy maintenance Spring-type parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure ABS functionality! With raise/lower valve Vehicle stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, displayed on the towing vehicle's display via EBS, not installed on truck (the technical requirements for this must be present in the truck. Only applies to basic tires). Electrics 24 Volt, multi-chamber lights, yellow LED side lighting Yellow LED side lighting synchronized with indicator "flashing side markers" 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Tipping body Steel trough made from highly wear-resistant HB 400 steel, sloped front wall with external hydraulic cylinder mounting. Foldable aluminium splash guard on front right for roll tarp. Shovel and broom holder on exterior front wall. Internal access at front wall. Side walls continuous 4 mm thick, floor continuous 5 mm thick Membrane tailgate Rear wall with 2-leaf door division 1/2 to 1/2, with 1 slider in the right leaf. With externally mounted rotary bar lock and mechanical lower lock Standing platform with access, connection plate for air/electrics and brake with large free space for optimal operability. Roll tarp can be stowed on the front right, with central locking on front left Country of registration/plates Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear Paintwork Hjdpfoi Rizqox Afkefh Chassis DB 7350 nova grey 10-year guarantee against corrosion Support legs black coated Tipping body: single color, RAL of your choice Roll tarp: RAL 7035 light grey

Durum: yeni, makine/araç numarası: df0bcd99c5751964e020b1055, boş ağırlık: 6 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 21 kg, dingil konfigürasyonu: 1 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Semi-Trailer Steel welded construction, fifth wheel plate with replaceable 2" king pin, low-bed sloping from wheel area to gooseneck with approx. 210 mm loading height, rear sloped to wheel area, aluminum ramp mounting rail across the entire rear width Wheel chocks with holders Side underrun protection in aluminum Wheel covers with removable galvanized steel sheeting 1 towing eye at rear, 10 t Spare wheel with holder on front wall/external front toolbox Hjdpei Ri Hkofx Afkefh Steel toolbox on front gooseneck crosswise, approx. L = 2400 mm, W = 400 mm, H = 600 mm, lockable Electric cable winch, 24 V, pulling force 8165 kg, mounted in front on gooseneck behind toolbox, standing on load platform, operated via remote control, cable length 35 m x approx. 10 mm, with roller fairlead and 2 removable guide rollers on gooseneck and rear ramp. NATO socket on terminal plate 1 pair of wheel recesses approx. 700 mm starting from start of gooseneck recessed into the floor, open outward. Note: Main frame projects approx. 145 mm 4 pairs of insert positions for wheel stoppers (Fliegl standard), without wheel stoppers for parking the semi-trailer approx. 100 mm high and approx. 100 mm long Removable wheel stoppers When transporting tractors, an approx. 50 mm spacer in the front wheel recesses, size for wheel recess approx. 50 mm high, approx. 1200 mm long, approx. 500 mm wide Lashing points low-loader 2 pairs of 2.5 t lashing eyes on gooseneck 7 pairs of lashing mushrooms recessed at the top and side of outer frame each 10 t 4 pairs of 10 t lashing eyes recessed on the top of the main frame longitudinal beams 1 screwable lashing eye with 6.7 t (JDT) load at rear center in ramp storage compartment 1 additional folding lashing eye at front of low-bed, each 10 t Axle + suspension SAF drum brake axle, Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17.5 from leading manufacturers Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 swap-proof coupling heads at front, without connecting hose EBS, electronic braking system with EBS socket at front, without connection cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! Electric 24 Volt, multi-chamber LED lights with resistor, side yellow LED lighting, license plate lighting in LED, (Note: With certain towing vehicles incorrect diagnostics can occur, although functionality is provided) 2 front white position lights in LED 2 rear white/red lane marker lights in LED 2 x 7-pin and 1 x 15-pin swap-proof sockets at front, without connection cable LED beacon with bracket, switched via sidelights (lamp removable) Additional LED work lamp at rear, switched via reversing light Floor Gooseneck covered with steel / checker plate Low-bed area steel-perforated plate, in wheel recess area steel / checker plate and in wheel housing area removable sheet covering Rear ramp with steel-perforated plate Side walls Aluminum, 400 mm high, side-mounted on gooseneck, removable, approx. 2500 mm long Rear wall aluminum, 400 mm high, on gooseneck, removable Loading ramps Pair of aluminum drive-on ramps, load capacity max. 12,000 kg per pair, approx. 3400 mm long and 320 mm wide, ramp storage 1 x between the rear longitudinal beams Operating instructions Approval / plates Approval country: Germany prepared for single-line license plate holder Contour marking with reflective strips in