Kullanılmış Fliegl Fliegl Tsk 118 5M satın al (3.154)

Durum: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT21201012268, boş ağırlık: 3.240 kg, azami yük ağırlığı: 8.560 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2022, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, lastik boyutu: 235/75 r17,5, renk: yeşil, işletme ağırlığı: 3.240 kg, Further information Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tip bearing, gearbox support foot at the front, foldable rear support, wheel chocks with holders, steel underrun protection, rear mudflap covering the full width (not available with forklift holder), quarter shell mudguards, spare wheel, same brand as main tyres, steel rim, loose, plastic toolbox with shelf, width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (lock not included). Note: Dropside contacts the storage box when folded down, lockable storage compartment for loading ramps underneath the loading area, pair of aluminium ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg (mounting rail for ramps at the rear). Drawbar with certified 40 mm towing eye, height adjustable via spindle, max. adjustment range 300 mm Fgedpfx Ask E Tdaequoc BPW drum brake axles, axles/chassis laser aligned to reduce tyre wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle-load compensation (rocker balancing) 2-line compressed air brake system, colour-coded piping for easy servicing, manual spindle parking brake. Integral air reservoir, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by tractors that guarantee the effectiveness of the ABS. Duomatic coupling at the front, with connecting line to the tractor unit. 24 Volt, multi-chamber lights, side marker LEDs in yellow, 2 white position lights at the front, 2 white/red track markers at the rear, 1 x 15-pin plug at the front, with connecting cable. Three-way tipper system, hydraulic multi-piston press with stroke limiter and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, throttle to be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, including connecting hose; operation hydraulically via truck PTO. Sturdy tipping platform with 4 mm steel plate floor, steel dropside body, continuous sidewalls, foldable and pendulum-mounted with central bottom lock. Removable rear corner posts. Tailboard foldable and pendulum-mounted, with central bottom lock, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Dropside return springs (not available with split sidewalls), platform width 2,420 mm, pair of lashing eyes in the floor, each rated at 5 tonnes. Operating instructions: The stated gross weight is technically possible; depending on the load, the gross weight may not be achieved while complying with permissible axle, support, and kingpin loads. (Poor driving and trailing behavior possible due to improper load distribution) Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG-FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear.

Durum: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT21201011556, boş ağırlık: 3.300 kg, azami yük ağırlığı: 8.200 kg, toplam ağırlık: 11.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 450 mm, süspansiyon: çelik, lastik boyutu: 235/75 r17,5, renk: kırmızı, The images are archive photos; the vehicle may still be in use! Further Information: Fgodpfolhpzvjx Aqusc - Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing - Gear support foot at the front, foldable rear support, 2 wheel chocks with holder, steel underride guard, mudflap across full rear width, quarter shell fenders, spare wheel (same make as main tyres), steel rim, loose, 1 plastic toolbox with removable shelf (dimensions: w=620/h=360/d=440 mm), lockable with padlock (padlock not included). Note: In the folded-down position, the sideboard touches the storage box. - Lockable storage compartment for loading ramps beneath the cargo bed, 1 pair of aluminum ramps, length 3,000 mm, width 360 mm, load capacity per pair 8,000 kg (ramp mounting rail at rear) - Drawbar with certified 40 mm towing eye, height-adjustable via spindle, max. adjustment range 300 mm - BPW drum brake axles, axles/chassis laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bushings and mechanical load equalization (rocker balancing) - 2-line compressed air braking system, color-coded lines for easy servicing. - Hand spindle parking brake, integral air reservoir, ABS and ALB, with ABS socket at front, complete with connecting cable. Note: The trailer may only be towed by vehicles capable of supporting ABS functionality. 2 non-interchangeable coupling heads at the front, with connecting hoses to the tow vehicle. - 24 volts, multi-chamber lights, yellow LED side lighting, 2 white position lights at the front - 2 white/red marker lights at the rear, two 7-pin non-interchangeable sockets at the front, with connecting cable - Three-way tipper body, hydraulic multi-piston press with lift limiter and safety cable, low-pressure cylinder up to max. 170 bar, without throttle (to be retrofitted to the truck if required). Hydraulic connection SVK coupling NW 10/3 with hose included - Actuation hydraulically via truck PTO - Robust tipping platform with 4 mm steel floor plate, steel sideboard construction, continuous sides, fold-down and swing-mounted with lower central locking. Removable rear corner posts. Rear wall fold-down and swing-mounted with lower central locking. - Platform length approx. 5,000 mm, side walls with 6 lower hinges, platform width 2,420 mm - 5 pairs of lashing rings in the floor, each rated at 5 tons Country of registration: Germany, with Dekra inspection and certificate (as per §13 EC-FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective tape according to ECE R 048 (white on the side, red at rear)

Durum: yeni, makine/araç numarası: bdf30cb8a53c70e900bdb40a7, boş ağırlık: 2 kg, azami yük ağırlığı: 9 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: -, Further Information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing support Gear support leg at the front 2 wheel chocks with holder Fgjdpfji Riwijx Aqusc Steel underrun protection Full-width rear mudflap Quarter-shell mudguards Lockable storage compartment for loading ramps beneath the loading platform Central axle trailer towing device Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + Suspension BPW drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load balance (rocker balance) Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims factory silver Braking System 2-line air brake system, colored lines for easy servicing. Manual spindle parking brake Integrated air reservoir ABS and ALB, with ABS plug at the front and connection cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! 2 foolproof coupling heads at the front, with connection lines to the truck Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin foolproof plugs at the front, with connection cable Hydraulics Three-way tipper system, hydraulic multi-piston ram with lift limiter and safety cable Low-pressure cylinder up to max. 170 bar, no restrictor. If needed, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Operation hydraulically via truck PTO Tipping Platform Sturdy tipping platform with 4 mm steel floor, steel side walls, continuous side panels, drop-down and pendulum-mounted with central locking at the bottom. Removable rear corner posts. Rear wall drop-down and pendulum-mounted, with central locking at the bottom. Platform length approx. 4,500 mm, sidewalls with 5 hinges at the bottom. Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated 5 tons Operating Instructions The stated total weight is technically feasible; depending on the load, the total weight may not be achievable while observing permissible axle, support, and saddle loads. (Poor handling and tracking may result from incorrect load distribution) Registration/Country of Origin/Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Conspicuity marking with reflective strips according to ECE R 048, white on sides and red at the rear Paintwork Frame hot-dip galvanized including passivation 15-year warranty against rust-through Sidewall/platform RAL 3002 Carmine Red Rear support, loading ramps, and toolbox optionally available at an extra charge Note: Archive images

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 2.860 kg, azami yük ağırlığı: 7.040 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tilt bearing Front gearbox support leg Rear foldable support 2 wheel chocks with holders Steel underrun protection Full-width rear mudflap (not in conjunction with forklift holders) Quarter-shell mudguards Lockable storage compartment for loading ramps underneath the loading platform 1 pair of ramps, 3,000 mm long, 360 mm wide, load capacity per pair 4,000 kg (ramp mounting bar at the rear) Central axle trailer towing mechanism Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles and Suspension GFA or BPW axles according to manufacturer's choice, with tapered roller bearings and S-cam brakes Fgjdpoi Ri Eijfx Aquec Axle/chassis laser alignment for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load compensation (rocker compensation) Wheels and tyres 235 / 75 R 17.5 as per manufacturer's choice Steel rims, factory silver Braking system 2-line air brake system, colour-coded piping for easy servicing. Manual spindle parking brake Integral air reservoir ABS and ALB, with ABS plug at the front, including connection cable, Caution: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! 2 tamper-proof coupling heads at the front with connection lines to the tractor unit, Electrics 24 volts, multi-chamber lights, side-mounted yellow LED lighting 2 white position lights at the front 2 white/red lateral marker lights at the rear 2 x 7-pin tamper-proof plugs at the front with connection cable, Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinders up to max. 170 bar, without throttle. If required, this must be retrofitted to the truck. Hydraulic connection with SVK connector NW 10/3, incl. connecting hose Operation hydraulically via truck PTO Tipper body Sturdy tipper body with 4 mm steel sheet floor, steel drop sides, seamless side walls, foldable and non-pendulum mounted without central locking at the bottom. Rear corner posts insertable. Tailgate foldable and pendulum-mounted, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2,420 mm 5 pairs of lashing eyes in the floor, each rated at 5 tonnes Operating Instructions The specified gross weight is technically feasible, however, depending on the load, it may not be possible to reach the gross weight while adhering to the permissible axle, support, and king pin loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration/plates Country of registration: Germany With Dekra inspection and report (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective stripes according to ECE R 048, white on sides and red at rear Painting Frame hot-dip galvanized incl. passivation, 15-year warranty against rust-through Side walls/body RAL 9010 pure white Note! Inner body only primed if a painted version is ordered! Attention! These are archive images. Also IMMEDIATELY available with 5 m body!

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 3.135 kg, azami yük ağırlığı: 8.665 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 8.350 mm, toplam genişlik: 2.550 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5", lastik durumu: 100 yüzde, Özel Taşıma Çözümü Fliegl aracınızı ihtiyaçlarınıza göre yapılandırın. Gösterilen araç bir örnektir. Üretim ve donanım, müşteri taleplerine göre bireysel olarak yapılır. İnce taneli çelik kaynak konstrüksiyonu Dış şasi hafif eğimli, germe kayışı askısı için "Load-Lock-Profil" Önde şanzıman destek ayağı Katlanabilir arka destek 2 adet takoz ve tutucu Çinko kaplı çelik alt koruma Arka kısımda tam genişlikte çamur siperliği Avrupa direktiflerine uygun çeyrek kabuk tipi çamurluklar Avrupa normlarına uygun antisprey çamur siperliği 1 adet plastik alet kutusu, b=600 / y=425 / d=460 mm, kilitlenebilir Yükleme alanı altında açık, yük dikme cepleri için depolama bölmesi Fodpsi Ri H Dsfx Aqusgc Zemin boyunca dış şasiye kadar gömülü, toplamda 4 adet bağlama/dikme rayı (kullanılabilir iç genişlik dış dikmeler arasında yaklaşık 2170 mm), yaklaşık 100 mm yüksekliğinde. 20 mm yuvarlak çelik şeritlerle, üstte ve altta, aralarındaki mesafe yaklaşık 60 mm (yuvarlak çelikte). Altı kısmen açık olacak şekilde köşe sacı ile bitirilmiştir. 80 x 80 mm boyutlarında dikme bağlama ve yerleştirme için. Dış şasiye gömülü 4 çift dikme cebi, iç ölçü 83 x 83 mm Şasi merkezinde ana şasi destekli 4 adet dikme cebi, iç ölçü 83 x 83 mm 6 çift takma dikme B=80/ D=80/ U=2000 mm, sıcak daldırma galvanizli Not: Dikme cepleri / takma dikmeler, uzatma malzemeleri, borular vb. yüklerin sadece bunlarla sabitlenmesi için tasarlanmamıştır, sarmalama olmadan kullanılamaz. Yan çarpmaya karşı alüminyum koruma Tandem römork için çekme donanımı Onaylı 40 mm çekme halkalı çekme kolu Çekme kolu mekanik olarak 4 x 500 mm'lik adımlarla 1800 - 3800 mm arasında ayarlanabilir, çekme kolu uzunluğu 1800 mm'ye ayarlı Dingil ve Süspansiyon Üretici tercihi ile dingiller, konik makaralı rulman ve S-kam frenli "Dingil/şasi lazer ölçümü" ile lastik aşınması ve yakıt tüketimi azalır Bakım gerektirmeyen çelik-kauçuk burçlu paraboy süspansiyon ve mekanik dingil yük dengelemesi (salınım ayarı) Lastik ve Tekerler 235/75 R 17,5", üreticinin seçimine göre Fabrika gümüşü çelik jantlar Fren Sistemi 2 hatlı pnömatik fren sistemi Yay depolu park freni Bütünleşik hava deposu Önde değiştirilemez 2 bağlantı başlığı ve motorlu araç ile bağlantı hatları, Önde ABS fişi ve bağlantı kablosu ile ABS ve ALB Dikkat: Römork sadece ABS fonksiyonunu garanti eden çekici araçlar tarafından çekilmelidir! Elektrik 24 Volt, çok odacıklı LED aydınlatma, yanlarda sarı LED aydınlatma, plaka aydınlatması LED (Not: bazı çekici araçlarda yanlış teşhisler oluşabilir, fakat fonksiyon mevcut) Önde 2 beyaz pozisyon lambası LED Arkada 2 beyaz/kırmızı şerit lambası LED Önde bağlantı kablolu iki adet 7 kutuplu, değiştirilemez fiş Zemin Yaklaşık 30 mm kalınlığında kontrplak zemin, yüksek nokta yüküne dayanıklı Not: Zemin, hava koşullarından etkilenerek atma yapabilir! Yatak uzunluğu yaklaşık 6.200 mm Kullanım Talimatları Çekiş toplam uzunluğu 18.750 mm'yi aşarsa özel izin gereklidir. Ülkeye özgü ruhsat kurallarına uyulmalıdır. Tescil / Plakalar Tescil ülkesi: Almanya Dekra onaylı ve ekspertiz raporlu ECE R 048’e uygun kontur işaretlemesi, yanlarda beyaz ve arkada kırmızı yansıtıcı şeritlerle Boyama Çerçeve sıcak daldırma galvanizli ve pasifleştirmeli "15 yıl delinmeye karşı garanti" Özel Taşıma Çözümü

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 2.900 kg, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 8.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.000 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5", lastik durumu: 100 yüzde, Özel Taşıma Çözümü Fliegl aracınızı gereksinimlerinize göre yapılandırın. Gösterilen araç bir örnektir. Üretim ve donanım müşteri taleplerine göre bireysel olarak gerçekleştirilir. Şasi Merkezi Dingilli Römork İnce taneli çelik kaynak konstrüksiyonu Dış çerçeve hafif eğimli, yeni "Load-Lock Profili" ile kayış bağlantısı için Tabanda dışta 3 çift sabitleme halkası, her biri 5 ton 1 adet önde köşelerde, 1 adet arka köşe eğiminde, 1 adet ise arka eğimde Tabanda/dış çerçevede dışta 6 çift sabitleme halkası, her biri 5 ton Önde dişli destek ayağı Katlanabilir arka destek 2 adet takoz ve tutucu Yan çarpma koruması alüminyum Alt koruma galvanizli çelik Arka kısımda tam genişlikte çamurluk (forklift tutucu ile birlikte kullanılamaz) Çeyrek kabuklu çamurluk 1 adet plastik alet kutusu, en=600 / y=425 / d=460 mm, kilitlenebilir Çeki Donanımı Merkezi Dingilli Römork Onaylı 40 mm çeki halkalı çekme kolu Çekme kolu, mil ile yükseklik ayarlanabilir, maks. ayar aralığı 300 mm Akslar+Süspansiyon Üretici tercihine göre GFA veya BPW akslar, eğik makaralı rulman ve S-kam frenli "Aks/şasi lazer ölçümlü" Lastik aşınmasını ve yakıt tüketimini azaltır Bakım gerektirmeyen çelik-kauçuk yataklı parabollü süspansiyon ve mekanik aks yük dengeleyici (salıncak dengeleyici) Fren Sistemi 2 hat basınçlı hava fren sistemi Kolay servis için renkli hat döşemesi El mili park freni Önde 2 hata karşı korumalı bağlantı başlığı, çekici araç ile bağlantı hatları 24 volt ABS ve ALB, önde ABS fişi, bağlantı kablosu dahil Dikkat: Römork sadece ABS etkinliğini garanti eden çekici araçlar tarafından çekilebilir! Tekerlekler ve Lastikler 235/75 R17,5, üretici tercihine göre marka Çelik jantlar, fabrika gümüşü Elektrik 24 volt, çok odacıklı farlar, yanlarda sarı LED aydınlatma Önde 2 adet beyaz pozisyon lambası (LED) Arkada 2 adet beyaz/kırmızı şerit takip lambası Önde 2 x 7-pin hata karşı korumalı fiş ve bağlantı kablosu Zemin Yüksek noktasal yüke dayanıklı çelik/damla desenli sac döşeme Not: Kaynak çekmesine bağlı olarak hafif dalgalanma olabilir! Kasaboyu yaklaşık 6.200 mm Arka eğim yaklaşık 900 mm Ön Panel/Köşe Dikmeleri 25 mm alüminyum boşluklu profil, 400 mm yükseklik Yan Paneller Fodpfx Aqjzcqpaoujgc 25 mm alüminyum boşluklu profil, 400 mm yükseklik, katlanabilir ve çıkarılabilir Arka Panel/Köşe Dikmeleri Şasiye sabitlenmiş 1 çift çelik dikme ve rampaları kilitlemek için tutucu, giriş genişliği yaklaşık 2.430 mm Yükleme Rampaları Çelik rampalar, 2.300 mm uzunluğunda, 510 mm genişliğinde, yandan kaydırılabilir Rampalarda tutma kolu Ahşap kaplama (uç kısmı çelik/damla sac) Tek kişilik kullanım için gazlı amortisör Kullanım Talimatları Belirtilen toplam ağırlık teknik olarak mümkündür; yük türüne bağlı olarak izin verilen dingil/destek ve semer yüklerine uyuluyorsa toplam ağırlığa erişilemeyebilir. (Yanlış yük dağılımı nedeniyle kötü sürüş ve takip performansı) Tescil Ülkesi/Plaka Almanya Dekra onayı ve ekspertiz raporu ile (§13 EG - FGV) 7/24 servis hattı Tek sıralı plaka için hazır ECE R 048'e göre yanlarda beyaz ve arkada kırmızı reflektör şeritli kontur işaretleme Boya Şasi: DB 7350 Nova gri "10 yıl paslanmazlık garantisi" Ön panel: Alüminyum Yan paneller: Eloxal kaplı alüminyum Yükleme rampaları: Sıcak daldırma galvanizli Özel Taşıma Çözümü

Durum: ikinci el, boş ağırlık: 3.500 kg, azami yük ağırlığı: 8.300 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2009, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.440 mm, yükleme alanı yüksekliği: 3.000 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5, renk: beyaz, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden. Curtain-sided body and tarpaulin, 2 axles, tandem, air suspension, lift and lower function, ABS (anti-lock braking system), Edscha sliding roof, lashing eyes, underrun protection, front support, rear support, height-adjustable drawbar. Fgjdpfx Aei Rpx Nequjc Body: Flatbed + curtain trailer for glass transport with Edscha roof. Tyres approx. 50% tread remaining. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted.

Durum: yeni, makine/araç numarası: 06b624786df9f4b5c196a36b0, boş ağırlık: 3 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 14 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 285 / 70 r 19,5, Further information Fjdpfx Asi Ri Ipsqujgc Chassis Central-Axle Tipping Trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing 2-speed mechanical support leg at the front Foldable rear support Wheel chocks with holders Steel underrun protection Rear mudflaps along the entire width Quarter-shell mudguards Lockable storage compartment for loading ramps underneath the loading area Central axle drawbar system Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension SAF drum brake axles Axles/chassis laser aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and Tires 285 / 70 R 19.5, manufacturer’s choice Steel rims, factory silver Brake System 2-line pneumatic brake system Spring-loaded parking brake 2 misconnection-proof coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, including connecting cable Electrics 24 Volt, multi-chamber lamps, side-mounted yellow LED lighting 2 white position lamps at the front 2 white/red lane-keeping lamps at the rear All lighting in LED design (Note! With certain towing vehicles, malfunction warnings may occur even when lights are functioning correctly) 1 x 15-pin plug at the front with connecting cable Hydraulics Three-way tipping gear, hydraulic multi-piston press with lift limiter and safety cable Low-pressure cylinder up to max. 170 bar, without restrictor. If necessary, this must be retrofitted to the truck. Operated hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, including connecting hose Tipper Bodies Robust tipping body with 4 mm steel floor, steel drop-side construction, continuous side walls, drop and swing-mounted with central locking at the bottom. Rear corner stanchions removable. Tailgate drop and swing-mounted, with central locking at the bottom. Load bed length approx. 5,000 mm, side walls with 6 hinges at the bottom. Drop-side return springs (not possible with split side walls) Rear wall swinging and as double-leaf door (non-folding), with door holder and side protection rubber Load bed width: 2,420 mm 5 pairs of lashing eyes in the floor, each for 5 tonnes Registration/Country Plates Country of registration: Germany With Dekra inspection and certification (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized including passivation, 15-year warranty against rust-through Side wall/bodywork RAL 3002, Carmine Red Note: Bridge interior only primed! Note: Archive images!

Durum: yeni, makine/araç numarası: e763c8c2bb3370bd2342236a4, boş ağırlık: 3 kg, azami yük ağırlığı: 8 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball tip bearing Gearbox support leg at the front 2 wheel chocks with holders Steel underrun protection Lockable storage compartment for loading ramps underneath the platform Central axle trailer drawbar Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + Suspension Euro-axles at our discretion, with tapered roller bearings and S-cam brakes Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalisation (rocker equaliser) Wheels and Tyres 235/75 R 17.5 manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Colour-coded line routing for easy servicing Hand spindle parking brake Integral air reservoir Without ABS, but with mechanical ALB. Maximum permissible speed: 60 km/h 2 unmistakable coupling heads at the front with connecting lines to the tractor unit Electrics 12 Volt, multi-chamber lights, no side yellow LED lighting, side reflectors 2 white position lights at the front 2 white/red marker lights at the rear 1 x 7-pin 12 Volt plug at the front, with connecting cable approx. 60 cm extended Hydraulics Three-way tipper, hydraulic multi-piston press with stroke limiter and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck. Hydraulic connection with SVK connector NW 10/3, incl. connection hose Operation hydraulically via PTO from the truck Tipper Body Robust tipper body with 4 mm steel sheet floor, steel drop side body, continuous side walls, fold-down and pivot-mounted with central locking at the bottom. Removable corner posts at the rear. Rear wall fold-down and pivot-mounted with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2,420 mm 5 pairs of lashing eyes in the floor, each 5 t Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable while complying with permissible axle, support, and kingpin loads. (Poor driving and trailing performance possible due to incorrect load distribution) Country of Registration / Licence Plates Country of registration: Germany with Dekra approval and certificate for max. 60 km/h registration, towing vehicle agricultural or forestry tractor (country of registration Switzerland max. 40 km/h possible) Prepared for single-line license plate holder Without contour marking / reflective stripes according to ECE R 048 Paintwork Frame hot-dip galvanised incl. passivation, 15-year warranty against rust-through Fjdpfx Aei Rizbjqusgc Side walls/body RAL 3002 Carmine Red Note! If the body is galvanised, it will not be painted! Note! Body interior only primed! Wide tyres possible at extra cost. 355 / 60 R 18, then loading height approx. 980 mm Attention: Archive images!

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 2.200 kg, azami yük ağırlığı: 8.300 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.500 mm, yükleme alanı genişliği: 2.050 mm, yükleme alanı yüksekliği: 400 mm, toplam uzunluk: 6.280 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5", lastik durumu: 100 yüzde, Customised Transport Solution Configure your Fliegl vehicle to suit your requirements. The pictured vehicle is an example. Production and equipment are tailored individually to customer specifications. Chassis Central Axle Low-bed Trailer Fine-grain steel welded construction Front gearbox support leg Rear telescopic support 2 wheel chocks with holders Steel mudguards covering both wheels Aluminium side underrun protection Central axle trailer drawbar Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles & Suspension BPW drum brake axles "Laser-aligned axles/chassis" for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel/rubber bearing and mechanical axle load equalisation (rocker compensation) Wheels and Tyres 235 / 75 R 17.5" Brand according to manufacturer’s choice Steel rims, factory silver Braking System 2-line compressed air brake system Spring-loaded parking brake 2 interlock-proof coupling heads at front, with connecting lines to the towing vehicle 24 Volt ABS and ALB, with ABS plug at front, including connecting cable Note: The trailer may only be towed by vehicles that ensure proper ABS function! Electrical System 24 Volt, multi-chamber rear lights, side yellow LED marker lights 2 white position lights at front 2 white/red marker lights at rear 2 x 7-pole interlock-proof plugs at front, including connecting cable Platform TTS Low-profile steel trough, platform floor with steel/chequer plate covering, steel sidewalls solidly welded to the floor Platform length 4,500 mm Trough front and sides with "Load-Lock profile" for securing lashing straps (8 front, 12 per side) Note: Minor floor rippling possible due to welding distortion! 2 pairs of lashing points, 1x in front corners of the steel trough and 1x rear in the floor, each rated for 5t Loading Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable With grab handle on ramps Wooden covering (front ends with steel/chequer plate) With gas pressure springs for single-person operation Operating Instructions The stated gross weight is technically achievable; depending on cargo, the gross weight may not be attainable while complying with permissible axle, drawbar, and coupling loads. (Poor tracking and trailing behaviour may result from incorrect load distribution) Country of Registration / Plates Fgjdpfx Aqoi Ri Ebouec Country of registration: Germany With Dekra inspection and certificate (to §13 EC-FGV) 24/7 service hotline Prepared for single-row number plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame painted or galvanised as per customer specification Loading ramps hot-dip galvanised Customised Transport Solution Configure your Fliegl vehicle to suit your requirements. The pictured vehicle is an example. Production and equipment are tailored individually to customer specifications.

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT21001014667, boş ağırlık: 2.200 kg, azami yük ağırlığı: 8.300 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.500 mm, yükleme alanı genişliği: 2.050 mm, yükleme alanı yüksekliği: 400 mm, toplam uzunluk: 6.280 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5", lastik durumu: 100 yüzde, renk: gümüş, Chassis Central Axle Trailer Lowbed Fine-grain steel welded construction Telescopic support leg at the front Telescopic rear support 2 wheel chocks with holders Steel fenders over both wheels Side underrun protection made of aluminium Central axle trailer towing device Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles & Suspension BPW drum brake axles "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and Tires 235 / 75 R 17.5'' to manufacturer's specification Steel rims, factory silver Brake System Fedpfxezcnzas Aquegc 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the truck 24 Volt ABS and ALB, front ABS socket, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure ABS functionality! Electrics 24 Volt, multi-chamber lights, side LED lighting in yellow 2 white position lights at the front 2 white/red marking lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable Flatbed TTS Low steel trough, bridge floor made of steel/chequer plate, steel walls solidly welded to the floor Bridge length 4500 mm Trough front and sides with "Load-Lock profile" for lashing strap attachment (8 at the front, 12 per side) Note: Slight floor corrugation due to welding distortion possible! 2 pairs of lashing eyes, 1 at the front corners of the steel trough and 1 at the rear in the floor, each rated for 5 tons Ramps Steel ramps, 2300 mm long, 510 mm wide, laterally adjustable With handgrip on the ramps Wooden covering (tip area with steel/chequer plate) With gas pressure springs for one-person operation Operating Notes The specified gross weight is technically possible; depending on the cargo, the permissible total weight may not be achieved due to axle/support/king pin weight limits. (Poor driving/track behaviour possible due to incorrect load distribution) Country of Registration / Signs Country of registration: Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white at the sides and red at the rear Paintwork Frame: hot-dip galvanized including passivation "15-year warranty against rust-through" Note: Floor corrugation possible due to hot-dip galvanization! Ramps: hot-dip galvanized Attention: The images are archive photos!

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 2.520 kg, azami yük ağırlığı: 8.000 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.050 mm, yükleme alanı yüksekliği: 400 mm, toplam uzunluk: 7.280 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5", lastik durumu: 100 yüzde, Tailor-made Transport Solution Configure your Fliegl vehicle to your specific requirements. The vehicle shown is an example. Production and equipment are individually customized as per customer specifications. Chassis Center Axle Low-Bed Trailer Fine-grained steel welded construction Front landing gear with gearbox support Telescopic rear support legs 2 wheel chocks with holders Steel fenders covering both wheels With anti-spray mud flaps only on the last axle Aluminum side underrun protection Front transverse stop, insertable in floor holes Drawbar system for center axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles & Suspension BPW drum brake axles "Axle / chassis laser alignment" - reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber mounts and mechanical axle load compensation (rocker equalization) Wheels and Tires 235 / 75 R 17.5" Manufacturer's choice Factory silver steel rims Brake System 2-line compressed air brake system Spring actuated parking brake 2 fail-safe coupling heads at the front, with connection lines to tractor unit Parking sockets for electrics, ABS/EBS, and air coupling at the drawbar 24 Volt EBS, Electronic Braking System with front EBS connector, including connection cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! "TPMS" Tire Pressure Monitoring System according to ECE R 141, indication on tractor display, via EBS Electrics 24 Volt, multi-chamber LED lights, side yellow LED lighting, number plate illumination in LED Side yellow LED lighting linked to indicators ("flashing side markers") 2 front white position lights in LED 2 rear white/red lane position lights in LED Premium LED side marker lights, with 20 LEDs per light 2 x 7-pin fail-safe plugs at the front, with connection cable Superstructure/TTS Platform Low-profile steel trough, deck made of steel/checkered plate, steel sidewalls solidly welded to floor Platform length 5500 mm Front and sides equipped with "Load-Lock profile" for lashing strap attachment (8 at the front, 16 per side) 2 pairs of lashing rings, 1 x front in steel trough corners, 1 x rear in the floor, each 5 t 3 additional pairs of lashing rings in the floor, each 5 t 4 pairs of lashing rings bolted to side walls Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable With grab handle on ramps Wooden inlay (tip area with steel/checkered plate) With gas strut for single-operator use Rear Panel / Corner Stanchions Film-faced plywood board, 400 mm high, insertable, between access ramps Operating Note The stated gross weight is technically possible; depending on the load, gross weight may not be achievable due to legal axle, support, and kingpin load limits. Registration Country / Signage Registration country: Germany Certification according to EC 2007/46 Fgodpfjzcnugox Aqusc Prepared for single-line number plate holder Contour marking with reflective tape as per ECE R 048, white on sides, red at rear Warning sign according to ECE - 70 Tailor-made Transport Solution

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 3.100 kg, azami yük ağırlığı: 34.900 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 7.690 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", lastik durumu: 100 yüzde, Customised Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications. Chassis Semi-Trailer Container Fine-grained steel welded construction, fifth wheel plate with replaceable kingpin (size 2) Container Mounts: 1 x 20-foot container centrally positioned (or swap body containers 7.15 / 7.45 m), front not retractable, container locking twistlocks in extended version 24 t two-speed landing legs, single-sided operation with anti-spray mud flaps as per EC regulations Stainless steel drip tray with 1 1/4-inch drain pipe + 1 1/4-inch shut-off valve, including drip plate, perforated step plates approx. 400 mm wide, left and right between drip tray and longitudinal beams 4 hose trays approx. 4500 mm long (hose box) for hose pipes 2 x DN 200 outside + 2 x DN 160 centrally arranged, rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on hose pipes 1 stainless steel grounding lug at the rear right of the frame, with international grounding label on the frame Access steps on the rear right onto the underrun guard, at the rear externally on the main beam, step plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axles/chassis laser alignment reduces tyre wear and fuel consumption Offset axle spacing (combined transport) up to 44 t gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and traction assistance, activated by braking three times Fodoi Rixkspfx Aquogc Brake System 2-line compressed air braking system Coloured piping for easy maintenance Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting cable EBS, Electronic Braking System with EBS socket at the front, no connection cable included Note: The trailer may only be towed by tractors that guarantee ABS functionality! With raise & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal for display in the driver’s cab (truck must be pre-equipped, truck installation not included, not a calibrated scale) Wheels and Tyres 385/65 R22.5, brand at manufacturer's discretion Steel rims, factory silver finish Electrics 24 volt, multi-chamber lights, yellow LED side marker lighting 2 white position lights at the front 2 white/red lane marker lamps at the rear 1 x 15-pin socket at the front, without connection cable Operational Instructions The total weight specified is technically possible; depending on the cargo, the total weight in compliance with permitted axle/support/king pin loads may not be achieved (poor driving and tracking behaviour possible if load distribution is incorrect) This vehicle must only be loaded with 20' tank containers compliant with ISO 668 and specifically ISO 1496-3! Tank containers must have 'end-load-transfer areas.' Country of Registration / Plates Germany Type approval according to EC 2007/46 24/7 Service Hotline Prepared for single-line license plate holder Warning sign according to ECE - 70 ADR inspection according to 9.1.1.2 of the ADR, EX/II, EX/III / approval certificate for vehicles transporting specific dangerous goods (ex.B3) with warning board at the rear; not valid for substances UN 0331 and 0332 (explosives B-E) Contour marking with reflective tape

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT21001012243, boş ağırlık: 2.500 kg, azami yük ağırlığı: 8.000 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.050 mm, yükleme alanı yüksekliği: 630 mm, toplam uzunluk: 7.280 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5", renk: mavi, The images shown are archive photos! The vehicle may currently be in use! Fjdpsqmc Raofx Aquogc Further information Chassis Central axle low-bed trailer Fine-grain steel welded construction, gearbox support foot at front, telescopic rear support, wheel chocks with holder, steel fenders covering both wheels Central axle trailer draw device Drawbar with inspected 40 mm towing eye, drawbar height adjustable via spindle, max. adjustment range 250 mm Axles & suspension Euro axles of our selection, with tapered roller bearings and S-cam brake, axles/chassis laser aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) braking system 2-line compressed air brake system, spring-loaded parking brake, two fail-safe coupling heads at the front with connecting lines to the towing vehicle, ABS and ALB, ABS plug at the front with connection cable Attention: The trailer may only be towed by vehicles that ensure the functionality of the ABS! Electrical system 24 volts, multi-chamber lights, yellow LED side lighting, two white position lights at the front, two white/red lane marker lights at the rear, one 15-pin plug at the front with connection cable Deck TTS Low steel trough, deck floor made of steel/chequer plate, steel side walls solidly welded to the floor, deck length 5,500 mm, trough equipped at front and sides with load-lock profiles for lashing straps (8 at front, 16 per side) Note: Slight floor rippling possible due to weld distortion! Pair of lashing rings, one at each front corner in the steel trough and one at the rear in the floor, each rated at 5 tons; additional lashing rings in the floor, each rated at 5 tons Loading ramps Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable, with carry handle on the ramps, equipped with wooden surface, gas strut supported for single-person operation Operating instructions The stated gross weight is technically possible. Depending on the cargo, the gross weight may not be attainable while complying with permissible axle/support/kingpin loads. (Poor driving and trailing characteristics possible in case of incorrect load distribution) Country of registration/ Registration plates Country of registration: Germany, with Dekra inspection and appraisal (according to §13 EG FGV), prepared for one-line license plate holder, contour marking with reflective strips according to ECE R 048, white at sides and red at rear The images shown are archive photos! The vehicle may currently be in use!

Durum: yeni, boş ağırlık: 5.740 kg, azami yük ağırlığı: 24.260 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, renk: gümüş, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden. Rotating beacon, 3 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), extendable to 3m width, lashing rings, two-part loading ramps, mechanical ramps, extendable tow bar, lateral aluminum underrun protection, twin tyres, EBS. Body: loading length approx. 8.5m, extendable to 3.05m. Demonstrator vehicle! Parabolic suspension with axle compensation at the rear, 3 x 10t SAF axles, permissible gross weight up to 30t possible, length-adjustable drawbar. New vehicle from stock with daily registration on 21.07.2020 in the manufacturer's name! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Fgedsxbttqjpfx Aqusc

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902028859, boş ağırlık: 5.660 kg, azami yük ağırlığı: 29.340 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 13.700 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.700 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", lastik durumu: 100 yüzde, renk: kırmızı, Chassis semi-trailer for forwarding/logistics Steel welded construction in reinforced design, only 2 longitudinal beams as double-T beams with steel/chequer plate between the beams, fifth wheel plate with replaceable 2" king pin. Rear light protection fender. 8 pairs of lashing eyes bolted or welded to the frame, at the manufacturer’s discretion 24-ton, 2-speed landing gear, single-side operation, with straight base, no sliding compensation Wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, hot-dip galvanized steel Half-shell mudguards with anti-spray flaps according to EC regulations 1 spare wheel holder for 1 spare wheel, with wheel mounting kit 1 toolbox recessed between the longitudinal beams 8 timber stakes as per manufacturer’s choice, bolted to the frame, each with 2 telescopic timber uprights extendable from 1800 mm to 2800 mm, 7 tons per pair Axles & Suspension BPW disc brake axles with 430 mm disc diameter Air suspension with lift & lower valve, safety cable on the axles 1st axle is an automatic lift axle including forced-lowering and starting aid, operated by “3x brake application” (the starting aid functions up to 30% axle overload and up to max. 25 km/h) Axle spacing offset 1410/1310 mm (suitable for combined transport), up to 44 tons gross train weight Fgodpfxeza Anvj Aquoc Wheels and Tyres 385 / 65 R 22.5" Manufacturer’s choice Steel rims, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake Axle load detection via EBS CAN bus signal, display in cab (the truck must be pre-equipped, not installed on the truck, not a calibrated scale) 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! "Safe Parking" Electrical System 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable Front bulkhead/corner stanchions Steel/mesh bulkhead, approx. 2,300 mm high, bolted to frame Approval / Plates Country of registration: Germany Approval in accordance with EC 2007/46 Prepared for single-line number plate holder Outline marking with reflective tape as per ECE R 048, white on the side, red at the rear Warning signs as per ECE-70 Paintwork Frame: DB 7350 Nova grey Landing legs: black coated Front bulkhead: hot-dip galvanized

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33001012559, boş ağırlık: 6.250 kg, azami yük ağırlığı: 17.750 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.620 mm, yükleme alanı genişliği: 2.520 mm, toplam uzunluk: 10.890 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 860 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5", lastik durumu: 100 yüzde, renk: siyah, Chassis Low Loader Trailer: Steel welded construction, turntable with robust ball bearing ring, foldable rear support, 2 wheel chocks with holder, aluminium side underrun protection, full-width rear mudflap (not in combination with forklift mount), half-shell mudguards, 1st axle with anti-spray mudflap, anti-spray mudflaps behind 2nd and 3rd axles, 1 plastic toolbox with shelf, lockable with padlock, dimensions: width=620 / height=360 / depth=440 mm. Extendable widenings to 3,000 mm. Central storage compartment for wooden beams on the loading area, 70 mm wooden beams for extension to 3,000 mm. Tie-down rings on the low loader, 1 pair of tie-down recesses built into the front longitudinal member at the gooseneck, each rated for 10 t. 4 pairs of lash holes on the outer frame, each for 5 t (for lashing strap attachment). 7 pairs of lashing mushrooms, recessed into the top and side of the outer frame, each rated for 10 t: 1x at the gooseneck, 6x in the low deck section; first tie-down 250 mm from the front and last max. 250 mm from the rear, distance between tie-downs not greater than 1,100 mm. 5 pairs of ring lashing points recessed in the outer frame, each for 5 t (can be converted for stake pockets). 2 additional pairs of folding tie-downs, each for 10 t: 1 at the gooseneck (overhanging), 1 recessed in the floor behind the last axle. 1 pair of screw-in lashings, each rated for 6.7 t (JDT), with large flange plate including thread as counterholder, at the front on the gooseneck. Drawbar Assembly for Turntable Trailer: Drawbar with tested 40 mm towing eye, parking sockets for electric/ABS and air connections on the drawbar. Axles & Suspension: SAF drum brake axles, "laser calibrated axles/chassis" – reducing tyre wear and fuel consumption, air suspension with lift & lower valve, separately operable front and rear. Wheels and Tyres: 235 / 75 R 17.5" Fulda, wheels: 6x steel rims mounted inside in twin-tyre arrangement; 6x polished aluminium wheels mounted outside. Fsdpfozaznzsx Aqusgc Brake System: 2-line pneumatic brake system, spring-loaded parking brake, trailer info centre for display of vehicle data such as axle load (not calibrated) and odometer, vehicle stability control, axle load detection via EBS CAN-bus signal for in-cab display (truck must be pre-equipped), 2 fail-safe coupling heads at the front with connection lines to the tractor unit, EBS, electronic braking system with EBS plug at the front with connecting cable. Electrics: 24 Volt, multi-chamber LED lamps, side yellow LED marker lights, LED number plate lighting, brand Aspöck EcoLED 2 with dynamic indicator, premium LED side marker lamps, 2 white front position lamps in LED, 2 white/red lane guide lamps at the rear in LED, 2x 7-pin fail-safe plugs at the front with connecting cable, additional LED work light at the rear, 1 LED beacon with holder, switched via parking light, 2 pairs of LED warning signs illuminated and extendable to 3,000 mm. Floor: Gooseneck front with steel/ribbed plate covering, storage box recessed in the approach slope to the gooseneck, followed by 70 mm larch wood floor, in the wheel arch area steel/ribbed plate covering, rear slope with 70 mm larch wood floor. Low loader deck including rear slope: 6,500 mm. Loading ramps: steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, additional lower ramp lock (prevents lateral sliding of the ramps, not in combination with side hydraulic ramp shift), wooden covering, spring-assisted lifting. Frame: hot-dip galvanise

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT21001013325, boş ağırlık: 2.500 kg, azami yük ağırlığı: 8.000 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2023, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.050 mm, yükleme alanı yüksekliği: 630 mm, toplam uzunluk: 7.280 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5", renk: mavi, The images are archive photos. The vehicle may still be in use. Chassis Central Axle Low-Bed Trailer Fine-grained steel welded construction Front gearbox support Telescopic rear support Wheel chocks with holder Steel sheet mudguards covering both wheels Aluminum side underrun protection Central axle trailer towing device Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles & Suspension Euro axles (manufacturer’s choice), with tapered roller bearings and S-cam brake "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5" Manufacturer’s choice Factory silver steel rims Braking System 2-line compressed air brake system Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Fgsdpfjzadb Djx Aquec Attention: The trailer may only be towed by vehicles that ensure effective ABS operation! Electrics 24 Volt, multi-chamber lights, amber LED side lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin plug at the front, with connecting cable Platform/Tub Low-mounted steel tub, platform floor with steel/chequer plate surface, steel side walls solidly welded to floor Platform length 5,500 mm Front and side with "Load-Lock profile" for lashing straps (8 at the front, 16 per side) Note: Slight floor waviness possible due to welding distortion! Pair of lashing eyes, 1 x in the front corners of the steel tub and 1 x at the rear in the floor, each rated 5 tons Additional pair of lashing eyes in the floor, each rated 5 tons Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable With handhold on the ramps Wooden overlay (ramp tip backed with steel/chequer plate) Gas pressure spring assist for single-person operation Operating Instructions Specified total weight is technically feasible; depending on cargo, the total weight may not be achievable while observing permissible axle, support, and fifth wheel loads. (Poor handling and tracking may result from incorrect load distribution) Registration/Country Plates Registration country: Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Finish Frame: RAL 5002 Ultramarine Blue Ramps: Hot-dip galvanized The images are archive photos. The vehicle may still be in use.

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33802030369, boş ağırlık: 31.110 kg, azami yük ağırlığı: 34.889 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2022, bir sonraki muayene (TÜV): 01/2027, toplam uzunluk: 7.390 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", renk: kırmızı, The images shown are archive photos; the vehicle may still be in use! Fine-grain steel welded construction, fifth wheel with replaceable 2" king pin, container mounts: 1 x 20-foot centered (or swap body container 7.15 / 7.45), not retractable at the front, container locking twist locks in the longer version. 24-ton 2-speed landing gear, single-sided operation, with straight base, without telescopic compensation. Wheel chocks with holder, side underrun protection, aluminium underrun guard, anti-spray mudflaps according to EC regulations, stainless steel drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip plate, perforated step plates, approx. 400 mm wide, left and right between the drip tray and longitudinal frame. Hose trays approx. 4500 mm in length (incl. hose compartment) for hose pipes 2 x DN 200 external + 2 x DN 160 centrally arranged, rear hose compartment (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all round with rubber seal, with drain hole at lowest point, then without lid on hose pipes, stainless steel grounding lug at the rear right of the frame, with international grounding sticker on the frame, rear access steps at the right onto underrun guard, rear right outside on main beam with step plate approx. 260 mm long & 300 mm wide. Axles & Suspension SAF disc brake axles, "axle/chassis laser alignment" reduces tire wear and fuel consumption, offset axle spacing 1410/1310 mm (intermodal transport) up to 44t gross train weight. Air suspension, first axle with automatic lift axle, including forced lowering and starting aid, operated by "brake three times" (starting aid functions up to 30% axle overload and up to a maximum speed of 25 km/h). Brake System 2-line compressed air brake system with color-coded line routing for easy maintenance. Spring-loaded parking brake. 2 non-interchangeable coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by tractors that ensure the proper functioning of the ABS! With raise & lower valve, vehicle stability control system. Axle load detection via EBS CAN bus signal for display in the truck cab (truck must be pre-configured; no installation on truck). Wheels and Tires 385/65 R22.5", brand at manufacturer's discretion, steel rims, factory silver. Electrics 24V system, multi-chamber lights, side yellow LED lighting, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable. Operating Notes The specified total weight is technically feasible. Depending on the cargo, the permissible total weight may not be achievable while adhering to allowed axle, support, and fifth wheel loads. (Poor driving and trailing behavior is possible due to incorrect load distribution.) This vehicle may only be loaded with 20’ tank containers that comply with ISO 668 and especially ISO 1496-3! The tank containers must have "end-load transfer areas" (end crossbeam load transfer zones)! Fgjdjy Tvphepfx Aquoc Country of Registration / Signs Warning sign according to ECE-70, certification according to ADR 9.1.1.2, EX/II, EX/III / registration certificate for vehicles transporting certain dangerous goods (ex.B3) with warning sign at rear, not valid for materials according to UN 0331 and 0332 (explosives B-E), contour marking with reflective strips according to ECE R 048, white on the side, yello

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902037031, boş ağırlık: 4.795 kg, azami yük ağırlığı: 30.320 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.040 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", renk: gri, These images are sample archive photos! Vehicle may still be in operation! Fine-grained steel welded construction, in Basic lightweight design, fifth wheel plate with replaceable 2" king pin, Curved front wall – patented 24-ton 2-speed landing gear, operable from one side, with semi-circular lower part and straight mounting plate, with load compensation Wheel chocks with holder Foldable underrun protection Semi-shell mudguards Integrated 'mudguard bracket', stone-repellent surface With anti-spray splash guards only on the last axle Tarpaulin rod with holder Tow hook at the rear (not with Revolution) Axles & Suspension SAF disc brake axles with 430 mm disc diameter 'Axles/chassis laser-aligned' – reduces tire wear and fuel consumption Axles in off-road version Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, operation ``3x braking'' (starting aid works up to 30% axle overload and at speeds up to max. 25 km/h) 'Hot dip galvanized lift axle mechanism' Braking System 2-line compressed air braking system Color-coded line arrangement for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting lines 24 Volt EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Note: This trailer may only be towed by towing vehicles that ensure ABS effectiveness! With lift & lowering valve Vehicle stability system Automatic tipping lowering with shut-off valve 'TPMS' Tire Pressure Monitoring System, display via monitor in towing vehicle, via EBS, not installed in the truck (requirement must be present in the truck. Only for standard tires) Wheels and Tires 385/65 R22.5 Steel rims Electrics Fgedpoy Rrpljfx Aquoc 24 Volt, multi-chamber lights in LED, side yellow LED lighting, license plate lighting in LED (Note! Certain towing vehicles may show error messages, even though the lighting functions correctly) Side yellow LEDs integrated with indicators ('flashing side markers') 2 front white position lights in LED 2 rear white/red lane markers in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable Additional LED work light integrated in the rear, switched via reverse light Hydraulics Low-pressure cylinder max. 170 bar Operated hydraulically via truck PTO Tipping Body Aluminum box-type tipper body made from high-quality, wear-resistant material Sloping front wall, 5 mm thick, with external cylinder mount Side walls made from 30 mm hollow chamber profiles, cleanly welded, with top rail profile designed to repel bulk material. Interior with climb assist at the front wall (not in conjunction with Cramaro cover) Shovel and broom holder on the outside at the front wall Greenline – conical and aerodynamic tipper body design 'Membrane' rear wall Rear wall as swing tailgate with 'double-hinge', externally mounted with double hook lock Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, mounting plate for air/electrics and brakes, with ample free space for best possible operability Roll tarp, stowable on passenger side, with central locking on driver’s side Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with hard-chromed piston rod to prevent damage and rust caused by materials.

Durum: yeni, makine/araç numarası: 074630ca1b8dc2d710f82c15a, boş ağırlık: 3.980 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis Semi-Trailer Tipper Fine-grained steel welded construction in lightweight design, kingpin plate with interchangeable 2-inch kingpin Patented curved front wall Without landing leg Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard brackets with stone-repellent surface Tow hook at the rear Fodpfji Ri H Sjx Aqusgc Axles & Suspension SAF disc brake axles Axles/chassis laser aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, activation with triple brake application (starting aid is functional up to 30% axle overload and up to a maximum speed of 25 km/h) Hot-dip galvanized lift axle mechanism with 10 years’ warranty against corrosion Brake System 2-line compressed air braking system, color-coded line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With lift and lowering valve Vehicle driving stability system Wheels and Tyres 385/65 R22.5, make at manufacturer’s discretion Polished aluminum rim, make at manufacturer’s discretion Electrics 24 volt, multi-chamber lights, LED side marker lights (amber) 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupler, fixed part, NW 48 mm (without hose connection) Operated hydraulically via PTO on truck Body Aluminum box-body, made of high-quality, wear-resistant material; front wall 5 mm thick, with external end walls made of 30 mm hollow chamber profiles, precisely welded, with top rail profile deflecting loose material. Inside: ladder/access at front wall (not for use with Cramaro). External holder for shovel and broom at the front wall. Greenline – conical and aerodynamic body design Membrane-type rear wall Rear wall as pendulum flap with double joint hinge, mounted externally with double hook locking Rear wall with rubber seal (Note: Heat resistant up to 170°C max!) Continuous floor 5 mm thick, Brinell hardness 110 Note: Only suitable for the transport of sand, gravel, and round gravel with max. grain size 20 mm! All other transported goods are excluded from warranty! Standing platform with access, connection plate for air/electric and brake with large clearance for optimal operation Sliding tarp, single-sided folding to FR-right, with central locking in FR-left Operating Instructions For transportation of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material corrosion and rusting. The stated total weight is technically possible; depending on the load, the total weight may not be achievable due to permitted axle, support, and fifth wheel loads. (Poor driving and tracking behavior possible with incorrect load distribution.) Revolution Link: Revolution Link User Review: Registration Country / Plates Germany With DEKRA inspection and certificate (acc. to §13 EC-FGV) 24/7 Service hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau Body: R

Durum: yeni, makine/araç numarası: 357314e4e176f8758d11ba42b, boş ağırlık: 4.500 kg, azami yük ağırlığı: 30.500 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis Semi-Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2-inch kingpin Curved front wall patented telescopic support centrally mounted, uncoupling while loaded not possible; when uncoupled, the vehicle must be positioned with a rear tilt. 2 wheel chocks with holders collapsible underrun protection half-shell mudguards integrated mudguard holder with stone-repellent surface equipped with anti-spray mud flaps only on the rearmost axle 1 tarp rod with holder 2 tow hooks at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter axle/chassis laser measurement to reduce tire wear and fuel consumption axles in off-road version, air suspension Fgedpfx Aqoi Ri R Isuec 1st axle automatic lift axle, including forced lowering and start-up aid, activated by 3x brake application (start-up aid operates until axle overload exceeds 30% and up to a maximum speed of 25 km/h) hot-dip galvanized lift axle mechanism, 10-year corrosion warranty Braking System 2-line compressed air braking system, color-coded piping for easy servicing. spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors capable of ensuring proper ABS functionality! with raise & lower valve Vehicle stability system Automatic tipping lowering with shut-off valve Wheels and Tires 385/65 R22.5, make at manufacturer's discretion steel rims, factory silver Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lamps at front 2 white/red outline marker lamps at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupler, fixed part, nominal width 48 mm (without hose connection) hydraulically operated via truck PTO tipper bodies aluminum box body made from high-quality, wear-resistant material, front wall 5 mm thick, with external side walls of 30 mm hollow-chamber profiles, neatly welded, with bulk material-repellent upper rail profile. Internal access steps on front wall (not in conjunction with Cramaro). External scoop and broom holder on front wall. Greenline – conical and aerodynamic body design Membrane – rear wall Rear wall as pendulum flap with dual-hinge, externally mounted with double hook locking. Rear wall with rubber seal Note! Heat resistant up to max. 170°C! Floor 6 mm throughout Platform with access, connection plate for air/electrics and brakes, providing ample space for optimal operability. Roll tarp deposited on passenger side, with central locking on driver’s side Operating Notes For transporting salt, lime, etc., we recommend a tipper cylinder with a hard-chromed piston rod to prevent damage and corrosion by the material. The specified gross weight is technically feasible; depending on cargo, the gross weight may not be achieved within the permissible axle/support and fifth wheel loads. (Poor driving and tracking behavior may result from incorrect load distribution) Approval / Plates Germany Approval per EC 2007/46 24/7 service hotline preparation for single-line license plate holder contour marking with reflective tape per ECE R 048, white sides and red rear

Durum: yeni, makine/araç numarası: 7383bc2b7f580f0cb319b52f7, boş ağırlık: 5.400 kg, azami yük ağırlığı: 33.600 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.960 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22.5, Further Information Chassis Semi-Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin Patented curved front bulkhead Central telescopic landing leg, uncoupling when loaded not possible; when uncoupled, the vehicle must be positioned with a rearward incline. Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard bracket with stone-repellent surface Splash guards behind the last axle in asphalt specification, hinged to mudguard, with hook-in option at the top of the mudguard, shortened mudguard Towing hook at rear Axles & Suspension SAF disc brake axles, 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Axles in off-road version Air suspension First axle: automatic lift axle, including forced lowering and traction aid Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty Braking System 2-line compressed air braking system. Color-coded hoses for easy maintenance. Spring-loaded parking brake 2 mistake-proof coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, no connection cable Attention: The trailer may only be towed by towing vehicles that ensure ABS function! With raise & lower valve Vehicle stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the tractor unit's display, via EBS, not installed on the truck (the truck must be equipped accordingly; only for standard tire set). Electrics Fgedpfji Rix Ijx Aquoc 24 Volt, multi-chamber lamps, yellow side LED lighting Yellow side LED lighting linked to turn indicator, "flashing side marker lights" 2 white position lamps at the front 2 white/red lane marker lamps at the rear 2 x 7-pin mistake-proof sockets at the front, without connection cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw coupler, fixed part, NW 48 mm (without hose connection) Hydraulic operation via PTO of the truck Body Steel round body in Stone Master design made from highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic system and access on the front wall. Membrane rear wall Rear wall as pendulum flap, externally mounted with double hook locking. 2 clamping screws with handwheels at the lower sides. Continuous 4 mm thick side walls, floor 4/5 mm thick, wear- and weight-optimized construction. Body in insulated version, Fliegl Asphalt Profi Thermo; front, side, bottom, and rear insulated with Fliegl Isotherm. BASIC tarpaulin cover, tarpaulin cladding Standing platform with access, connection plate for air/electricity and brakes with large clearance for optimal operability. Roll-up tarpaulin stored on right-hand side, central locking on left-hand side Country of Registration / License Plates Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles according to RS 10 - 2013 Prepared for single-line license plate holder Warning sign to ECE - 70 Paintwork Frame: DB 7350 Nova Grey "10-year anti-corrosion warranty" Landing legs: galvanized Body/Side tarpaulin: RAL as desired, single color Roll-up tarpaulin: RAL 7035 light grey Thermal insulation also available in BASICplus (sheet metal cladding) and Premium (stainless steel cladding)!

Durum: yeni, makine/araç numarası: 7d479432c7290a73a46ff6365, boş ağırlık: 5.000 kg, azami yük ağırlığı: 34.000 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.960 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22.5, Further Information Chassis Tipper Semi-Trailer Fine-grained steel welded construction in basic lightweight design, fifth wheel plate with replaceable 2-inch kingpin Patented Curved Front End Central telescopic support leg; uncoupling under load is not possible; when uncoupled, the vehicle must be positioned with a rearward incline. Wheel chocks with holder Folding underride guard Half-shell mudguards Integrated mudguard holder with stone-repellent surface Tarpaulin rod with bracket Tow hook at the rear Axles & Suspension Fsdji Ri Dpspfx Aquogc SAF disc brake axles with 430 mm disc diameter Laser-aligned axles/chassis to reduce tire wear and fuel consumption Axles in off-road specification Air suspension 1st axle automatic lift axle, including forced lowering and start-up aid Hot-dip galvanized lift axle mechanism, 10 years warranty against rust penetration Braking System 2-line compressed air brake system, color-coded piping for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure ABS functionality! With raising & lowering valve Vehicle stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver 'TPMS' Tire Pressure Monitoring System according to ECE R 141, display via the truck’s dashboard through EBS (installation on truck required; only applies to original tires) Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting Lateral yellow LED lighting linked to indicators ('flashing side lights') 2 x 7-pin fail-safe sockets at the front, without connection cables Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, nominal width 48 mm (without hose connection) Operation hydraulically via truck PTO Body (Tipping Body) Steel round body in Stone Master Design, made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic system and access steps at front wall. Greenline – conical and aerodynamic trough shape Shovel and broom holder on the front wall, outside Membrane tailgate Tailgate as pendulum flap with double joint hinge, external with double hook locking. Two clamping screws with T-bar locks at the lower side edges. Continuous 4 mm thick side walls, 4/5 mm thick floor, wear- and weight-optimized construction Standing platform with access, connection plate for air/electric and brakes with extra-large operating space for best accessibility Roll tarpaulin stows on FR-right, with central locking on FR-left Registration Country / Plates Germany Approval according to EC 2007/46 Body stability according to EN 12642 24/7 service hotline Prepared for single-line number plate holder Warning plate according to ECE-70 Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Painting Frame: DB 7350 Novagrau "10 years warranty against rust penetration'' Support legs: galvanized Body: RAL color of your choice, single tone Roll tarpaulin: RAL 7035 light grey

Durum: yeni, makine/araç numarası: 8b1f4087611d72661dc0b3869, boş ağırlık: 4.750 kg, azami yük ağırlığı: 30.250 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.000 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22.5, Further Information Chassis, Semi-Tipper Fine-grained steel welded structure, lightweight basic design, kingpin plate with replaceable 2" kingpin Curved front wall, patented 24 t, 2-speed landing gear, single-sided operation, with straight base, without compensating support Foldable underrun protection Half-shell mudguards Tow hook at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Fsdpoi Ri Nfjfx Aqujgc Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against corrosion Brake System 2-line compressed air brake system, color-coded line routing for easy servicing. Spring-actuated parking brake 2 front fool-proof coupling heads, without connecting line EBS, electronic braking system with EBS socket at front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! With raise & lower valve Vehicle - driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via truck display, via EBS, without truck installation (prerequisites must be met in the truck; only for standard tire fitment). Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked with the indicator "Flashing side marker lights" 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin fool-proof sockets at front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw sleeve, fixed part, NW 48 mm (without hose connection) Operated hydraulically via the truck's PTO Tipping Body Steel round trough in Stone Master Design, made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic unit including ladder at the front wall. Greenline – conical and aerodynamic trough shape Shovel and broom holder on front wall exterior. Membrane tailgate Tailgate as swing door with double-joint hinge, externally mounted with two-point hook locking. 2 clamping screws with lever locks at the lower sides. Side walls continuous 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized construction, Standing platform with access ladder, connection plate for air/electric and brakes with generous space for optimal operability. Tarpaulin rolls to the right side for depositing, with central locking on the left. Country of Approval / Plates Germany With Dekra inspection and certificate (according to §13 EG – FGV) Body strength according to EN 12642 24/7 Service Hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, side white and rear red Painting Frame DB 7350 Nova grey 10-year warranty against corrosion Landing legs black coated Trough RAL color as desired, single color Tarpaulin RAL color as desired, single color Available in thermally insulated version!